2016 Toyota Sienna
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Sienna › 2016
These records cover every 2016 Toyota Sienna. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
5 recalls name the 2016 Toyota Sienna. Newest first.
Rollx Vans (Rollx) is recalling certain GMC Yukon, Sierra, Chevrolet Express 2500, Ford Transit, E-250, Toyota Sienna, Sienna Hybrid, Honda Odyssey, Chrysler Town and Country, Voyager, Pacifica, Dodge Grand Caravan, and Ram Promaster vehicles equipped with QRT-Deluxe and QRT-Max wheelchair restraints. Please refer to Rollx's recall report for specific model…
Risk and remedy
Risk
An unsecured wheelchair can move during transit, increasing the risk of injury.
Remedy
Rollx will work with Q'Straint to inspect and replace the retractors as necessary, free of charge. Owner notification letters were mailed February 5, 2026. Owners may contact Rollx's customer service at 1-800-956-6668.
Vantage Mobility International, LLC (Vantage) is recalling certain 2012-2018 AMS Genesis wheelchair vans, built on a Toyota Sienna vehicles. The rubber brake hoses that attach to the rear wheel assembly may be too short, causing them to rub against the rear axle trailing arm.
Risk and remedy
Risk
The contact may cause failure of the rear brake hoses, resulting in a loss of vehicle control and reduced braking ability, increasing the risk of a crash.
Remedy
Vantage will notify owners, and dealers will install a set of rear brake hoses that will provide the proper clearance, free of charge. The recall began December 16, 2019. Owners may contact Vantage customer service at 1-800-488-9082.
Braun Corporation (Braun) is recalling certain 2014-2019 Toyota Sienna mobility van conversions. The brake lines may have incorrect tube nut fittings installed, which may cause a pressure drop within the braking system.
Risk and remedy
Risk
The reduction in the braking system pressure may cause a loss of braking power in the rear braking system, increasing the risk of crash.
Remedy
Braun has notified owners, and dealers will install an adaptor to correct the issue, free of charge. The recall began June 25, 2019. Owners may contact Braun customer service at 1-800-488-0359.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2011-2016 Toyota Sienna minivans manufactured January 4, 2010, to August 12, 2016. If the power sliding door is unable to be opened when commanded, such as if the door is frozen shut, the door may subsequently open unexpectedly, possibly while the vehicle is moving.
Risk and remedy
Risk
If door opens while the vehicle is moving, there would be an increased risk of injury to the vehicle occupants.
Remedy
Toyota will notify owners, and dealers will replace the junction block, rear sliding door wire harnesses, and install two sub wire harnesses, free of charge. The recall began on July 28, 2017. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is G04.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2016 Toyota Sienna vehicles manufactured February 15, 2016, to February 19, 2016. In the affected vehicles, incorrect front seat belt height adjusters may have been installed. During a crash, this incorrect height adjuster may contact the B-pillar and tear or separate.
Risk and remedy
Risk
Failure and detachment of seat belt height adjuster would result in the occupant not being properly restrained in a crash, increasing their risk of injury.
Remedy
Toyota will notify owners, and dealers will replace the front seat belt height adjusters, free of charge. The recall began on April 29, 2016. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is G0H.
Owner complaints
76 complaints7 involved a crash1 involved a fire6 injuries
What owners report most
Latest complaints
- Structure
The contact owned a 2016 Toyota Sienna. The contact stated that the vehicle was previously repaired under NHTSA Campaign Number: 16V858000 (Structure); several years ago. The contact stated that the dealer only serviced the passenger’s side sliding door, even though the recall indicated that both…
The contact owned a 2016 Toyota Sienna. The contact stated that the vehicle was previously repaired under NHTSA Campaign Number: 16V858000 (Structure); several years ago. The contact stated that the dealer only serviced the passenger’s side sliding door, even though the recall indicated that both doors were included. The contact stated that the driver’s side rear sliding door had not yet failed completely but was malfunctioning. While pressing the button, the power door closed but failed to latch or seal shut. The contact stated that closing the door manually worked properly. The dealer was notified of the issue but declined to assist and indicated that the repair had expired in July 2026. The failure mileage was 196,000.
- Structure › Body
Our van has recently been having issues with the sliding doors. It has occurred while driving and the warning light as well as the warning for a door open, and the door lights have came on. Right before this occurs you can hear a click sound from the sliding door behind the driver's side as well as when you close the door, you can hear a strange sound when it closes, unlike the passenger side sliding door.
- Latches/locks/linkages › Doors › Latch · Structure › Body › Door › Hinge and attachments
The contact owns a 2016 Toyota Sienna. The contact stated that the driver’s side electric sliding door failed to properly open and close, and occasionally abruptly closed, causing a safety hazard to the occupants entering and exiting the vehicle. The cause of the failure has not yet been…
The contact owns a 2016 Toyota Sienna. The contact stated that the driver’s side electric sliding door failed to properly open and close, and occasionally abruptly closed, causing a safety hazard to the occupants entering and exiting the vehicle. The cause of the failure has not yet been determined. The local dealer and manufacturer were notified of the failure, but no assistance was offered. The contact stated that the vehicle was previously repaired under NHTSA Campaign Number: 16V858000 (STRUCTURE). The contact stated that the vehicle had experienced the failure listed in the recall. The failure mileage was unknown.
- Wheels
Excessive outer wear on front tires
- Latches/locks/linkages › Doors › Latch
The contact owns a 2016 Toyota Sienna. The contact stated the driver-side sliding door latch failed to latch as intended. The contact stated that after several attempts, the sliding door failed to close completely. The contact stated that no warning light was illuminated. The vehicle was taken to…
The contact owns a 2016 Toyota Sienna. The contact stated the driver-side sliding door latch failed to latch as intended. The contact stated that after several attempts, the sliding door failed to close completely. The contact stated that no warning light was illuminated. The vehicle was taken to an independent mechanic but was not diagnosed. However, an unknown part was repaired. The contact stated that the failure persisted. The contact removed the button under the sliding door to manually close the door. The manufacturer was not notified of the failure. The contact related the failure to NHTSA Campaign number: 16V858000 (STRUCTURE); however, the VIN was not included. The failure mileage was approximately 70,000.
- Power train
After 80,000 miles have a loud whirling sound coming from rear, after inspection and online investigation found many many others with same issue, the dust cover and or o-ring doesn’t properly protect the rear bearing in the coupler. So while the fix is to remove the rear differential coupler, and…
After 80,000 miles have a loud whirling sound coming from rear, after inspection and online investigation found many many others with same issue, the dust cover and or o-ring doesn’t properly protect the rear bearing in the coupler. So while the fix is to remove the rear differential coupler, and replace the bearing with an improved version, seems Toyota has stopped supporting this, and no longer offers the improved bearing as a replacement part, but only supports replacing the entire rear differential coupling at $2000 for the part plus labor. While many have replaced the bearing without issues despite toyota not allowing it as a fix. So first it should be a recall as this is an obvious defect effecting thousands, but then to gouge owners for thousands when the fix doesn’t require a complete replacement of the rear differential coupling assembly.
- Air bags
A deer was struck on the driver to middle of the front of the van while traveling 75 mph on the highway. Caused significant enough damage that van was inoperable. What was concerning was the airbags did not deploy despite the significant force and high speed associated with this accident.
- Engine · Seat belts · Unknown or other
What component or system failed or malfunctioned, and is it available for inspection upon request? The engine/transmission and the vehicle is available for inspection upon request. How was your safety or the safety of others put at risk? While driving the vehicle at the rate of 55-60 mph, the…
What component or system failed or malfunctioned, and is it available for inspection upon request? The engine/transmission and the vehicle is available for inspection upon request. How was your safety or the safety of others put at risk? While driving the vehicle at the rate of 55-60 mph, the vehicle came to a complete/instant stop without warning — potential causing harm or even death to the occupants of the associated vehicle, and it adversely affected my ability to safely control the vehicle. Also, as the incident was occurring, my drivers seatbelt became very, very tight. Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? No. Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? No, but this is the second occurrence of this same incident within the past 30 days.
- Structure › Body
The rear sliding power door on the passenger side closed on my six year old child. He was trapped in the door and could not move until I opened the door. He has pain and visible injuries on his back from the door. This happened on 2.10.23. There have not been any incidents with the van leading up…
The rear sliding power door on the passenger side closed on my six year old child. He was trapped in the door and could not move until I opened the door. He has pain and visible injuries on his back from the door. This happened on 2.10.23. There have not been any incidents with the van leading up to this incident. This happened when the van was parked in the garage and the engine was off. We have not tried to replicate the incident because it caused an injury. The vehicle is available for inspection.
- Unknown or other
Air conditioner works when it wants to. Not sure what seems to be the issue.
- Unknown or other
I was driving my 2016 Sienna 30 mph, when suddenly, the rear driver's side window exploded. The police came and inspected the incident, the surroundings and the vehicle, and determined that there was no object or strike to cause the explosion. There were no warnings or lamps. There was no pressure…
I was driving my 2016 Sienna 30 mph, when suddenly, the rear driver's side window exploded. The police came and inspected the incident, the surroundings and the vehicle, and determined that there was no object or strike to cause the explosion. There were no warnings or lamps. There was no pressure change such as a window or door opening to cause the explosion. Should the glass have imploded, we would be having a very different conversation, as my two children were in the vehicle with me. The safety of my two children was at risk due to the glass exploding. We called our local Toyota dealer, and they claim to have no information on dealer notifications, recalls, or even heard of such a thing, perhaps to avoid having to pay for the repair. I have attached a photo of the damaged window.
- Steering
TL* the contact owned a 2016 toyota sienna. The contact stated that while driving at 60 mph, the steering wheel stiffened, which resulted in her crashing the vehicle into the highway side barrier and a fence stopped the vehicle from going into the water. The contact did not seek medical attention…
TL* the contact owned a 2016 toyota sienna. The contact stated that while driving at 60 mph, the steering wheel stiffened, which resulted in her crashing the vehicle into the highway side barrier and a fence stopped the vehicle from going into the water. The contact did not seek medical attention and a police report was filed. The vehicle was towed and deemed totaled by the insurance company. The manufacturer was informed of the failure and performed an investigation. The manufacturer informed the contact that from the inspection, the edr recorded various steering input prior to the impact, however, there was no evidence found of a steering defect that caused the failure, and no assistance was offered. The failure mileage was 22,000.
- Structure › Body
Currently overseas in the army and no toyota store will fix it and the army will not let me ship my vehicle back to the states. [xxx] information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(B)(6).
- Suspension · Unknown or other
There IS something mechanically wrong with the design of the suspension that IS causing tires to wear completely in 15k-20k miles. This IS a known issue, and nothing IS being done about it. https://www.cargurus.com/cars/discussion-t34192_ds548164
- Wheels
Excessive tire wear on the outside of the front wheels after 20,000 miles. Minivan IS driven in normal city and highway driving. Tires are rotated every 5,000 miles. All 4 tires will need to be replaced after 20,000 miles.
- Electrical system · Structure › Body › Door
TL* the contact owns a 2016 toyota sienna. The contact stated that while stopped with the engine still running, the passenger's side sliding door slid open independently without warning. The vehicle was taken to auburn toyota (800 nevada st, auburn, ca 95603) and repaired under nhtsa campaign…
TL* the contact owns a 2016 toyota sienna. The contact stated that while stopped with the engine still running, the passenger's side sliding door slid open independently without warning. The vehicle was taken to auburn toyota (800 nevada st, auburn, ca 95603) and repaired under nhtsa campaign number: 16v858000 (structure). Approximately two years later, the failure had recurred while the engine was turned off. The vehicle was taken back to the same dealer on two separate occasions where the mechanic was unable to duplicate the failure. The manufacturer was also notified of the failure and a case was filed. The vehicle was not repaired. The failure mileage was 36,512.
- Seat belts
While buckling up on 6 dec 2019, the seat attachment to the b-pillar completely, without resistance, detached. the bolt that secured the belt was on the floor, completely pristine in appearance, undamaged, without any evidence of thread-locker application at the factory. the car had been in no…
While buckling up on 6 dec 2019, the seat attachment to the b-pillar completely, without resistance, detached. the bolt that secured the belt was on the floor, completely pristine in appearance, undamaged, without any evidence of thread-locker application at the factory. the car had been in no accidents and was in excellent shape, without a trace of body rust or deterioration. dealer replaced the bolt and checked the other belt anchoring bolts and said they were okl. had to return to the dealer in two days since their repair had left the seat belt twisted. they unbolted, then re-bolted the belt anchor in the un-twisted, correct position. no harm occurred since I put on my belt before starting the car; realizing the defect immediately, I got to work by other means that day. the vehicle was stationary, in my garage at the time of the defect discovery.
- Steering
The steering seized up on my 2016 toyota van while stopped at a traffic light. I had to get the vehicle towed. there are only 20904 miles on the odometer. Toyota says my warranty IS expired. toyota says I will need a new steering assembly, which I will have to pay IS for $3200.
- Electrical system · Engine · Fuel/propulsion system
Our 2016 toyota sienna spontaneously caught fire while parked in our driveway after returning from a short drive. After pulling into our driveway and shutting off the ignition, my wife smelled smoke as she was exiting the parked vehicle. This smoke intensified and quickly accelerated becoming an…
Our 2016 toyota sienna spontaneously caught fire while parked in our driveway after returning from a short drive. After pulling into our driveway and shutting off the ignition, my wife smelled smoke as she was exiting the parked vehicle. This smoke intensified and quickly accelerated becoming an engine compartment fire. She called for me & then called 911; but in the brief moments it took me to grab a fire extinguisher, the fire further intensified with sizable flames erupting out from around the hood, front grill & underneath the vehicle. I used up 2 fire extinguishers without any significant effect. I did not have any protective safety gear so after hearing several small explosions coming from under the hood & fearing more exposure to noxious fumes, I decided to abandon my attempts to extinguish the fire. The fire dept. Arrived within a few minutes and were able to put the fire out; however, the fire progressed through the initial attack and entered the passenger compartment causing severe damage to the entire vehicle (see attached photos). The sienna IS completely destroyed. Fortunately, there were no injuries. I have been made aware of multiple incidents of engine fires in toyota siennas in this & other closely related model years (2014-2017). See: nhtsa ID number: 11010601. I can also supply you with some additional media accounts of other toyota sienna engine fire reports. our sienna was routinely maintained as per manufacturer's recommendations & was last serviced on 9/13/2019 (see attached service receipt). The vehicle had approx. 35K miles on it & exhibited no prior signs of trouble, change in performance or warning indicator lights. We did have an unresolved problem with automatic side doors not operating properly after a recall repair; however, the local toyota dealer service dept. Could not identify a problem after multiple service complaints.
- Structure › Body · Suspension · Vehicle speed control
On june 6, 2019 at approximately 6 pm my vehicle experienced unintended acceleration. I was driving at 15 mph and it accelerated to 40-50 mph. Braking did not slow down the vehicle. I jumped the curb and hit three small trees. It came to a halt after undercarriage damage had been sustained. It was…
On june 6, 2019 at approximately 6 pm my vehicle experienced unintended acceleration. I was driving at 15 mph and it accelerated to 40-50 mph. Braking did not slow down the vehicle. I jumped the curb and hit three small trees. It came to a halt after undercarriage damage had been sustained. It was towed to cummings mobility where I purchased the vehicle. They could not determined what caused the unintended acceleration.
- Visibility/wiper
Sunroof glass exploded on me and my kids on mid morning of 5/9/2019. No other damage to vehicle. The temperature was around 85 degrees. The glass IS shattered with no way of utilizing the sunroof at this time. The vehicle was stationary at the time of the incident.
- Structure › Body
It the sliding door that could open while driving. toyota sent a recall document but they claim that since it was fixed with a ramp for handicap ,they claim that the ones responsible are the other company and not toyota. The company examined it and they claim that it IS toyota.
- Electrical system · Wheels
Wheels/ tires: needed to replace tires after 10,000 miles on normal highway driving conditions electrical: vehicle continues to blow/pop fuses when an electronic device IS plugged into the 12V dc power supply port located under the radio
- Air bags
I had car accident today and got hi my left front wnd really good and the police seen my car's air bag did not go off-it didn't shows up.my face got hitted by steering wheel.i was driving on city of puyallup washington running 25-35miles an hour when the vehicle behind me took over in front of me to change lane to the left.it was a big impact to make me turned and bounced away to right side.
- Structure › Body
Power sliding door cable snapped. It happened to both door (right and left) about 6 months apart. Had the car for about 2 years not not even excessive use. The first time was at a dealership for vehicle service and they fix it for free since it happened there even though they said warranty does not…
Power sliding door cable snapped. It happened to both door (right and left) about 6 months apart. Had the car for about 2 years not not even excessive use. The first time was at a dealership for vehicle service and they fix it for free since it happened there even though they said warranty does not cover. The second time was over this weekend and when I search online, many people experience the same problem. Poor quality cable (linkage) for the powered sliding door.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244115TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10224108TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10224102TSB: Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 01013E), Entune? Audio Plus (version 010156 or 01015C), or Entune? Premium Audio (versions 010171, 010170, or 01017D) may exhibit one or more of the following conditions: ?Head unit reboots at a specific location. ?Abnormal Destination Search app operation. ?Rebooting caused by no songs on the USB-connected iPhone. ?A one-time reboot after ignition is cycled to ACC-ON. ?Audio stays muted after the key is cycled. Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 010144), Entune? Audio Plus (version 01015E), Entune? Premium Audio (version 010182), or earlier may exhibit one or more of the following conditions: ?Head unit reboots intermittently. ?Home screen intermittently half blank after shifting out of reverse, if the driver uses reverse after using the maintenance reminder screen. ?Screen freezes during an incoming phone call. ?Incorrect time displays on the diagnostic menu. ?Radio station information does not match the radio station that is playing.?Abnormal playlist browsing operation. ?Mute stays enabled after key cycle. ??Search along my route? is inoperative. ?Traffic data scales improperly. ?Unit of measure is missing from distance to destination (showing ?11? instead of ?11mi/km?). ?Multi-information display (MID) compass does not match navigation screen when switching to North up. ?Navigation does not match MID when switching from miles to kilometers. ?Speed limit is blank on navigation screen. ?Go button on VR screen is inoperative. Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 010145), Entune? Audio Plus (version 010161), Entune? Premium Audio (version 010189), or earlier may exhibit one of the following conditions: ?Map will not display after it has been reprogrammed from the map micro SD card. Updated system software is now
- 10220183TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10220177TSB: Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 01013E), Entune? Audio Plus (version 010156 or 01015C), or Entune? Premium Audio (versions 010171, 010170, or 01017D) may exhibit one or more of the following conditions: ?Head unit reboots at a specific location. ?Abnormal Destination Search app operation. ?Rebooting caused by no songs on the USB-connected iPhone. ?A one-time reboot after ignition is cycled to ACC-ON. ?Audio stays muted after the key is cycled.
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10220142OBSOLETE NOTICE May 02, 2022: This bulletin is now obsolete. Please see T-SB-0045-22
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10211830Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 01013E), Entune? Audio Plus (version 010156 or 01015C), or Entune? Premium Audio (versions 010171, 010170, or 01017D) may exhibit one or more of the following conditions: ?Head unit reboots at a specific location. ?Abnormal Destination Search app operation. ?Rebooting caused by no songs on the USB-connected iPhone. ?A one-time reboot after ignition is cycled to ACC-ON. ?Audio stays muted after the key is cycled. Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 010144), Entune? Audio Plus (version 01015E), Entune? Premium Audio (version 010182), or earlier may exhibit one or more of the following conditions: ?Head unit reboots intermittently. ?Home screen intermittently half blank after shifting out of reverse, if the driver uses reverse after using the maintenance reminder screen. ?Screen freezes during an incoming phone call. ?Incorrect time displays on the diagnostic menu. ?Radio station information does not match the radio station that is playing.?Abnormal playlist browsing operation. ?Mute stays enabled after key cycle. ??Search along my route? is inoperative. ?Traffic data scales improperly. ?Unit of measure is missing from distance to destination (showing ?11? instead of ?11mi/km?). ?Multi-information display (MID) compass does not match navigation screen when switching to North up. ?Navigation does not match MID when switching from miles to kilometers. ?Speed limit is blank on navigation screen. ?Go button on VR screen is inoperative. Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 010145), Entune? Audio Plus (version 010161), Entune? Premium Audio (version 010189), or earlier may exhibit one of the following conditions: ?Map will not display after it has been reprogrammed from the map micro SD card. Updated system software is now avail
- 10208995TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10207963TSB This Service Bulletin includes guidelines meant to help determine whether to repair or replace a wire harness assembly based on damage type. This Service Bulletin should be used in conjunction with the applicable model and model year Electronic Wiring Diagram (EWD) and/or Repair Manual.
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10204571TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10204555TT: Some customers may experience echoing on the line calling the vehicle when using Bluetooth Hands Free. This is caused by the phone Hands Free volume being too low. These settings may need to be reapplied any time the phone is paired to a new head unit, a phone update is applied, or the phone is un-paired and re-paired.
- 10203533TSB: For proper calibration of the millimeter wave radar sensor, the vehicle and radar target must be on a level surface with a consistent plane. If a level surface with a consistent plane is not available, use the Floor Slope Compensation Procedure in this service bulletin in conjunction with the appropriate model and model year Repair Manual instructions when adjusting the millimeter wave radar sensor.
Every Toyota Sienna model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.