2011 Toyota Sienna
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Sienna › 2011
These records cover every 2011 Toyota Sienna. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
14 recalls name the 2011 Toyota Sienna. Newest first.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2010-2016 4Runner, 2003-2006 Tundra, 2003-2013 Corolla, 2009-2010 Corolla Matrix, 2004-2005 RAV4, 2002-2007 Sequoia, 2011-2013 Sienna, 2008-2012 Scion xB, 2008-2009 Lexus IS-F, 2007-2012 Yaris and Lexus ES350, 2010-2017 Lexus GX460, 2002-2010 Lexus SC430, 2006-2012 Lexus IS250 and IS350…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Toyota will notify owners. Depending on the vehicle model, dealers will replace the front driver inflator, front passenger airbag inflator, the airbag assembly, or the front passenger airbag sub-assembly and inflator. The recall began November 20, 2019. Owners may contact Toyota customer service at 1-888-270-9371 or Lexus customer service at 1-800-255-3987. Toyota's numbers for this recall are J0A, J0B, and J0C. Lexus' numbers for this recall are JLI, JLJ, and JLK.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2014-2016 Toyota 4Runner, 2014-2015 Scion xB, Lexus IS350C, IS250C, 2014 Toyota Sienna, Lexus IS-F, and 2014-2017 Lexus GX460 vehicles sold, or ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Toyota will notify owners. Depending on the vehicle model, dealers will replace the front passenger air bag inflator, or replace the air bag assembly. The recall began February 15, 2019. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are "Zone A" Toyota: G0P, Lexus: GLG; "Zone B" Toyota: G0R, Lexus GLH; "Zone C" Toyota: H0A, and Lexus: HLA.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2011-2016 Toyota Sienna minivans manufactured January 4, 2010, to August 12, 2016. If the power sliding door is unable to be opened when commanded, such as if the door is frozen shut, the door may subsequently open unexpectedly, possibly while the vehicle is moving.
Risk and remedy
Risk
If door opens while the vehicle is moving, there would be an increased risk of injury to the vehicle occupants.
Remedy
Toyota will notify owners, and dealers will replace the junction block, rear sliding door wire harnesses, and install two sub wire harnesses, free of charge. The recall began on July 28, 2017. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is G04.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010…
Risk and remedy
Risk
If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
Remedy
SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2008-2011 Scion xB and Lexus IS F, 2009-2011 Toyota Corolla and Corolla Matrix, 2006-2011 Toyota Yaris, Lexus IS250 and Lexus IS350, 2010-2011 Toyota 4Runner, Lexus IS250C, Lexus IS350C and Lexus GX460, 2011 Sienna, 2007-2011 Lexus ES350, and 2009-2010 Pontiac Vibe vehicles…
Risk and remedy
Risk
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Toyota will notify the Toyota and Lexus owners. General Motors will contact the Pontiac owners. Depending on the model, dealers will replace the passenger frontal air bag inflator or the air bag assembly, free of charge. The recall began on December 6, 2016. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for interim notification for this campaign are G1P (Toyota Zone A), G1R (Toyota Zone B), G2G (Lexus Zone A), and G2H (Lexus Zone B). Toyota's numbers for final remedy for this campaign are G0P (Toyota Zone A), G0R (Toyota Zone B), GLG (Lexus Zone A), and GLH (Lexus Zone B).
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion…
Risk and remedy
Risk
Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
Remedy
SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2004-2011 Sienna vehicles originally sold in, or currently registered in, Connecticut, Delaware, Illinois, Indiana, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West…
Risk and remedy
Risk
If the carrier cable is corroded due to road salt, the spare tire may separate from the vehicle, increasing the risk of a crash.
Remedy
Toyota sent owners in August 2014 an interim notification to advise owners of the recall and that dealers will perform an interim remedy to remove the spare tire and relocate it to the luggage compartment, free of charge. Owners are being mailed a second letter as parts become available and dealers will replace the spare tire carrier assembly with an improved one, free of charge. The remedy campaign is being performed in phases. The first phase of the recall began July 7, 2015. Owners may contact Toyota customer service at 1-800-331-4331. NOTE: 2004-2010 Siennas subject to this recall were subject to recall campaign 10V-160 initiated in 2010. Those owners are advised that they must have their vehicles remedied again under this campaign and that having the earlier recall completed did not remedy their vehicles. Additionally, model year 1998-2003 Siennas were recalled as part of safety recall 10V-160. Owners of those vehicles that have not had not the remedy performed on their vehicles, should contact their Toyota dealer to schedule a free repair.
Southeast Toyota is recalling certain model year 2008 and 2010-2013 Toyota Tundra, 2010-2012 Rav4, 2012 Toyota Sequoia, 2010-2011 Toyota Corolla, 2010-2011 Toyota Camry and Camry Hybrid, 2010-2013 Toyota Highlander and Highlander Hybrid, 2010-2013 Toyota FJ Cruiser, 2011 Toyota Land Cruiser, 2010-2013 Toyota Venza, 2010-2011 Toyota 4Runner, 2010-2013 Toyota…
Risk and remedy
Risk
An inaccurate label could lead to owners overloading their vehicles and tires. An overloaded vehicle can result in a tire failure which may result in a vehicle crash, personal injury, or property damage.
Remedy
Southeast Toyota will notify owners and provide a corrected label with instructions concerning its installation. A small group of the affected vehicles will need additonal remedies which are still being developed. The recall began on May 28, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013…
Risk and remedy
Risk
If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. This could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.
Remedy
Southeast Toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on March 21, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Toyota IS recalling certain model year 2011 through 2012 sienna vehicles for failing to comply with the requirements of federal motor vehicle safety standard number 110, "tire selections and rims." these vehicles do not meet the requirement for displaying the correct vehicle capacity weight as the rated load for the combination of cargo and occupants.
Risk and remedy
Risk
Incorrect information on the vehicle placard may lead to tire overloading and possibly cause tire failure increasing the risk of a crash.
Remedy
Toyota will notify owners, and will provide a remedy when it IS available. toyota will mail out a corrected placard to customers along with revised owner manual information. this service will be performed free of charge. the safety recall began on june 27, 2013. owners may contact toyota at 1-800-331-4331.
Southeast toyota IS recalling certain model year 2010-2011 corolla vehicles equipped with a non-toyota, blue tooth hands free device or navigation unit and certain model year 2011 toyota sienna vehicles equipped with a non-toyota, overhead entertainment system and/or bluetooth hands free device. there IS a possibility that the front a-pillar trim panel…
Risk and remedy
Risk
A damaged a-pillar trim panel retention clip may allow the trim panel to come loose and injure an occupant in the event of a crash.
Remedy
Dealers will inspect the a-pillar trim panel retention clip and replace it if necessary free of charge. the safety recall began on december 30, 2011. owners may contact southeast toyota at 1-800-301-6859.
Toyota IS recalling certain model year 2011 venza and sienna passenger cars manufactured from march 7, through march 10, 2011. there IS a possibility that the front, right, drive shaft may break due to insufficient heat treatment.
Risk and remedy
Risk
Should the drive shaft break during vehicle operation, the vehicle will lose power without prior warning. loss of motive power without warning may increase the risk of a crash.
Remedy
Toyota will notify owners and dealers will inspect the drive shaft, and, if the drive shaft IS identified as one that may not have been correctly manufactured, it will be replaced with a new one at no charge. the safety recall began on june 22, 2011. owners may contact toyota at 1-800-331-4331.
Toyota IS recalling certain model year 2011 sienna vehicles. the brake stop lamp switch IS mounted on a small bracket welded on the left side of the service brake pedal support assembly. due to its proximity to the parking brake pedal, in limited circumstances the stop lamp switch bracket could be damaged by the operator's foot during parking brake…
Risk and remedy
Risk
This could result in brake drag with associated brake noise, vibration, and/or illumination of the brake warning light. braking effectiveness could be reduced increasing the risk of a crash.
Remedy
Dealers will replace the bracket assembly free of charge. toyota plans to mail an interim owner notification in the middle of january 2011, to advise owners of the recall. a second letter will be mailed when parts are available to complete repairs. owners may contact toyota at 1-800-331-4331.
Southeast toyota IS recalling certain model year 2005-2011 passenger vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
A driver may overload a vehicle which may increase the risk of a crash.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. the safety recall began on may 27, 2010. owners may contact southeast toyota at 1-800-301-6859.
Owner complaints
615 complaints34 involved a crash7 involved a fire36 injuries
What owners report most
Latest complaints
- Exterior lighting
This vehicle has the dash cluster light up as soon as the key is turned on. It does not have automatic headlights which turn on when it is dark outside. Due to the nature of the dash cluster lighting up and the daytime driving lights being automatic to turn on, it is very easy to drive off down…
This vehicle has the dash cluster light up as soon as the key is turned on. It does not have automatic headlights which turn on when it is dark outside. Due to the nature of the dash cluster lighting up and the daytime driving lights being automatic to turn on, it is very easy to drive off down streets with street lights completely unaware that there are no taillights or clearance lights on. The dash is lit up, so that is not an indication. The driving lights are on, so you can see enough to drive. I am aware of this now, but in the last week I have observed 3 vehicles driving around with no lights on in the dark because of the same reason. These modern cars with the automatically lighted dash clusters are causing people to lose all ability to assess whether the vehicles lights are on. It is not a question of automatic headlights/taillights, its a question of designing the interior of the vehicle to give the operator a hint that he hasn't turned on a specific safety feature. This agency has implemented so many other mandatory things related to safety (automatic tire pressure monitoring, automatic braking, backup cameras, etc.) and you forget the most basic things. You burden the cost of the cars with automatic systems to protect the people on the road but you forget how they can breed complacency in the drivers of the vehicles. You don't want distracted driving, but it is fine to have to search a touch screen on the vehicle to find the most basic controls for HVAC? If you are going to mandate safety, it should be safety that not only keeps the occupants safe but also doesn't lead them to do even more unsafe things, whether directly or indirectly. Dash clusters should ONLY light up when the headlights/taillights are on as this gives you the necessary indication that the vehicle's lights are actually on. Its called FUNCTIONAL SAFETY!
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2011 Toyota Sienna. The vehicle was a private sale. The contact stated that at the time of purchase, the mileage was 102,694. The contact later discovered a mileage discrepancy in a Carfax report, which indicated that the mileage was previously recorded at…
Odometer Fraud. The contact purchased a 2011 Toyota Sienna. The vehicle was a private sale. The contact stated that at the time of purchase, the mileage was 102,694. The contact later discovered a mileage discrepancy in a Carfax report, which indicated that the mileage was previously recorded at approximately 202,000. The contact also stated that the contact was provided a different VIN at the time of purchase. The contact stated that the mileage recorded on the different titles was inconsistent. The contact reported the issue to the local State Police.
- Electrical system · Unknown or other
No accident t door on the rear passenger side will not open I have tried everything and it just will not budge. This is a safety hazard because in the case of an accident or emergency, the door cannot be opened. It will not move manually or automatically.
- Unknown or other
I have a flat tire the other day, and I try to put the spare tire on but it's gone. The spare tire's cable holds the spare tire under the car got corroded and broke. The spare tire is gone. It has lost some where on the road that I have not aware. I checked there is a recall for this. I called the toyota service but they said the VIN number is not on the recall list.
- Service brakes, hydraulic › Foundation components › Disc › Caliper · Suspension › Front › Control arm
The glide pins in the calipers came loose and one of the pins fell out (left front drivers side). As a result it caused the caliper to seize and smoke. It got hot and mangled the lower left control arm bushing. I bought a new glide pin and that one stayed it, but the right side (original part) came loose again, even after tightening it. We replaced the calipers with a different brand and it had no issues.
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2011 Toyota Sienna. The contact discovered that there was a mileage discrepancy. The vehicle was a dealer sale. At the time of purchase in 2025, the mileage was 110,000. The contact stated that a Carfax report indicated that the mileage was 300,000.
- Latches/locks/linkages › Doors › Latch
The contact owns a 2011 Toyota Sienna. The contact had received notification of NHTSA Campaign Number: 16V858000 (Structure); however, the part to do the recall repair was not yet available. The local dealer was contacted, but the repair was not completed. The contact stated that the manufacturer…
The contact owns a 2011 Toyota Sienna. The contact had received notification of NHTSA Campaign Number: 16V858000 (Structure); however, the part to do the recall repair was not yet available. The local dealer was contacted, but the repair was not completed. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated the power sliding door unexpectedly opened while driving on a local roadway. The vehicle was not repaired. The approximate failure mileage was 200,000. VIN tool showed no open recall.
- Electrical system · Engine
The catalyst, the Evap and the EGR/VVT
- Air bags · Electrical system · Latches/locks/linkages › Doors › Latch
The contact owns a 2011 Toyota Sienna. The contact stated that the air bag warning light was intermittently illuminated while driving. The contact stated that the warning light turned off while restarting the vehicle. Additionally, the contact stated that the sliding doors failed to function…
The contact owns a 2011 Toyota Sienna. The contact stated that the air bag warning light was intermittently illuminated while driving. The contact stated that the warning light turned off while restarting the vehicle. Additionally, the contact stated that the sliding doors failed to function automatically and required to be opened or closed manually. The contact stated that while attempting to open the front driver's side door in icy and snowy weather, the door made an abnormal cracking sound and failed to open. The contact stated that the passenger's side door made an abnormal cracking sound but opened as intended. The vehicle was not diagnosed or repaired by an independent mechanic or the dealer. The manufacturer was notified of the failure. The failure mileage was approximately 9,999.
- Electrical system · Service brakes · Wheels
Vehicle: 2011 Toyota Sienna XLE VIN: [XXX] Mileage: ~204,800 Incident Date: [XXX] Recent Service: Oil change, tire rotation, brake inspection, and multipoint inspection performed on November 10, 2025 at Fitzgerald Toyota Gaithersburg (Maryland). Description of the Defect: On [XXX] while driving…
Vehicle: 2011 Toyota Sienna XLE VIN: [XXX] Mileage: ~204,800 Incident Date: [XXX] Recent Service: Oil change, tire rotation, brake inspection, and multipoint inspection performed on November 10, 2025 at Fitzgerald Toyota Gaithersburg (Maryland). Description of the Defect: On [XXX] while driving with my child in the vehicle, my 2011 Toyota Sienna experienced a sudden and dangerous failure. A strong burning smell entered the cabin, the ABS warning light illuminated, and then wheels locked up while the vehicle was in motion. At the same time, the steering wheel locked, making the vehicle impossible to steer. The engine immediately lost power and shut down in the middle of the roadway. The vehicle would not restart and had to be towed. This failure occurred four days after dealership service at Fitzgerald Toyota Gaithersburg, which included an oil change, tire rotation, and brake inspection. The dealership initially claimed the failure was due to a “dead battery,” and the following day changed the explanation to a “shorted alternator.” A weak battery or alternator failure does not explain a mechanical wheel lock or steering wheel lock while driving. The dealership has refused to provide diagnostic documentation or photographs of the components involved. This incident presents a significant safety hazard, and if it had occurred at highway speeds, it could have resulted in a severe crash. I am reporting this to request investigation into a potential safety defect involving the steering system, braking/ABS system, electrical system, or related components. Safety Risk: High. Loss of steering control + wheel lock + engine shutdown presents an immediate crash hazard. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Fuel/propulsion system · Power train · Service brakes
Catalizador causando bajas emisiones, consecuencia encendido de codigos de luz de advertencia de tablero como luz indicadora de falla (check engine). Luz de advertencia ABS. Luz indicadora de derrape vsc-trac y luz de advertencia de presion de neumaticos. al viajar por carretera simplemente SE…
Catalizador causando bajas emisiones, consecuencia encendido de codigos de luz de advertencia de tablero como luz indicadora de falla (check engine). Luz de advertencia ABS. Luz indicadora de derrape vsc-trac y luz de advertencia de presion de neumaticos. al viajar por carretera simplemente SE apago y sin poder tener control de la misma dicha falla causo que ya no encendiera al tener que solicitar grua para el arrarstre de la unidad hasta la agencia de toyota en cordoba veracruz. seguro solo intervino con el arrastre de la unidad. Pero la sienna a llevado hasta el dia de hoy y fecha presente todos los servicios de agencia por la cual SE llevo de inmediato, pero con la novedad ES que ni la misma agencia LE a podido quitar la falla. No tienen ni la menor idea de la causa. su solucion seguen ellos eran los inyectores pero la camioneta volivio a hacer la misma falla y la agencia no da garantia de su mano de obra. Solo aumenta el gasto en refacciones sin solucionar la falla.
- Unknown or other
Both of the cables on my power doors have snapped now. Turned off switch & have been doing doors manually. The rear passenger side one doesn't like to slide and doesn't open fully.
- Structure › Body
Leaking water into passenger side during rain. Many have reported the same issue. Seems to be some loose seals on the roof.
- Engine · Unknown or other
I just but this car but I think the seller changed the mileage on it.
- Latches/locks/linkages › Doors › Latch · Structure › Body › Door
The contact owns a 2011 Toyota Sienna. The contact stated that while driving 55 MPH, the rear driver's and passenger's power sliding doors failed to latch securely and opened while driving. The contact stated that the vehicle was previously repaired under NHTSA Campaign Number: 16V858000…
The contact owns a 2011 Toyota Sienna. The contact stated that while driving 55 MPH, the rear driver's and passenger's power sliding doors failed to latch securely and opened while driving. The contact stated that the vehicle was previously repaired under NHTSA Campaign Number: 16V858000 (Structure), but the failure persisted. The vehicle was taken to the dealer, who determined that the power sliding door motor, cable, and door lock actuators needed to be replaced. The dealer had to zip-tie the power sliding doors to keep the doors closed. The vehicle was not repaired. The manufacturer was made aware of the failure but provided no assistance. The failure mileage was approximately 135,000.
- Structure · Tires › Pressure monitoring and regulating systems
The contact owns a 2011 Toyota Sienna. The contact stated that the rear driver's side sliding door had failed to close or latch securely while closing the door manually or while using the power door switch button. The vehicle was taken to C&C Auto, where the door motor and belt were replaced, and…
The contact owns a 2011 Toyota Sienna. The contact stated that the rear driver's side sliding door had failed to close or latch securely while closing the door manually or while using the power door switch button. The vehicle was taken to C&C Auto, where the door motor and belt were replaced, and other unknown repairs were performed. The door was repaired. Additionally, the contact stated that the rear passenger's side sliding door had failed to open and close as needed. The contact stated that the door was currently closed and would not open. The vehicle was taken to the dealer, where the contact was informed that the vehicle could not be repaired under NHTSA Campaign Number: 16V858000 (Structure); because the VIN was not included in the recall. Additionally, the contact stated that the TPMS had failed to function as needed. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 146,000.
- Unknown or other
Rear ac system the line is too close to the rear tire which was replaced once yet it is so close it gets friction and wears a hole in the line . Dangerous for people in the rear that may be inhaling a/c vapor while ac is running with a leak . Also bad for environment. There is no clearance the tire…
Rear ac system the line is too close to the rear tire which was replaced once yet it is so close it gets friction and wears a hole in the line . Dangerous for people in the rear that may be inhaling a/c vapor while ac is running with a leak . Also bad for environment. There is no clearance the tire is almost right on the line so when you hit a bump you are rubbing it . Repair man says he has had to repair several lines more than once because of them being placed too close to the rear tire . Date below is third time this happened same vehicle. First was in 2016 second was 2018
- Service brakes · Structure › Body · Vehicle speed control
I was pulling my 2011 Toyota Siena into a parking space. My foot was on the brake and the car was going about 5 mph. The car made a slight sound, along with a perceptible yet small physical shift, and (while my foot was on the brake) independently accelerated with tremendous force. It was like it…
I was pulling my 2011 Toyota Siena into a parking space. My foot was on the brake and the car was going about 5 mph. The car made a slight sound, along with a perceptible yet small physical shift, and (while my foot was on the brake) independently accelerated with tremendous force. It was like it was ignited. The car hit a concrete pole and was totaled. The acceleration over-rode the brake. No one was hurt. The concrete pole averted what could have been a catastrophic accident, had we hit pedestrians, or had we rear ended a car or truck on the freeway. The brakes failed as the car jumped into independent acceleration. My safety and the safety of my passenger were both at risk. As I said, in a different situation, we might have hit pedestrians, or gone through the wall of the grocery store and hit customers. The concrete pole saved us and others. The mechanic at the service center where the car was towed said it was impossible to discern if there had been a failure in the system of the car - though clearly both my passenger and myself experienced that failure in the car's ability to override an independent, forceful acceleration not caused by the driver. There was no warning of any kind. On the Edmunds site, there are many, many testimonials by other drivers of the Toyota Siena of similar, frightening experiences of independent acceleration. It is terribly dangerous and should be investigated. If there is not a recall on this vehicle, there should be. This is a potentially catastrophic defect.
- Unknown or other
Sliding door does not open or close automatically. I think there was a recall for this issue
- Structure › Body › Door › Hinge and attachments
The contact owns a 2011 Toyota Sienna. The contact stated while parked on a slight hill, her granddaughter opened the power sliding door to enter the vehicle however, the door did not latch or lock in place, causing the door to close independently while her granddaughter was entering the vehicle.…
The contact owns a 2011 Toyota Sienna. The contact stated while parked on a slight hill, her granddaughter opened the power sliding door to enter the vehicle however, the door did not latch or lock in place, causing the door to close independently while her granddaughter was entering the vehicle. The vehicle was not taken to the dealer but was previously repaired under a Toyota Customer Support Program where two hinges for the power sliding door were replaced. The manufacturer was not notified of the failure. The failure mileage was approximately 125,000.
- Engine
Driving down highway noticed white smoke coming from car. Exited highway and warning light then came on saying engine oil low. Stopped van immediately on side of the road and had it towed. Appears the oil coolant line burst which is a known issue on these vehicles after google searching, but was never made aware. Always completed all recalls. Extremely dangerous especially with children in car.
- Latches/locks/linkages › Doors › Latch · Unknown or other
Passenger slidding door opens while driving . My child was in the back seat & could have been thrown out of the minivan Contacted Toyota recall was fixed Sept 6, 2017. Happened last week again 10/17/23, contacted Toyota and dealership will not do anything customer support program extension ended .…
Passenger slidding door opens while driving . My child was in the back seat & could have been thrown out of the minivan Contacted Toyota recall was fixed Sept 6, 2017. Happened last week again 10/17/23, contacted Toyota and dealership will not do anything customer support program extension ended . This is a Toyota issue should be covered , there was a recall on this issue . Toyota says my responsibility to fix , this is unacceptable, the slidding doors are an issue with Toyota .
- Unknown or other
My passenger side sliding door began to jerk when closing with power button. The next day the cable completely snapped and it no longer opens at all. My driver side sliding door constantly opens and sometimes does not stay closed. I can hear the lock roll and it automatically unlocks itself. There was previously a recall on these doors completed I'm afraid I still have defective parts.
- Steering
Power steering light came on while driving causing the steering system to lose power suddenly. Almost got into an accident because I couldn't effectively turn the wheel. Mechanic inspected and found the steering motor was bad and that CPU needed to be replaced costing almost $4000 in repairs. Now…
Power steering light came on while driving causing the steering system to lose power suddenly. Almost got into an accident because I couldn't effectively turn the wheel. Mechanic inspected and found the steering motor was bad and that CPU needed to be replaced costing almost $4000 in repairs. Now my car is not driveable unless this is fixed. Car has only 140k miles. This is a VERY common problem with Toyota Siennas around these model years
- Steering
The intermediate shaft makes a clunking noise when turning the steering wheel.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10224108TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10220183TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10217806CSP: Takata CSP Coverage Job Aid - published 7.28.2022
- 10217804CSP: On July 30, 2018, a settlement of claims for Economic Loss related to Takata airbag inflators was approved for full implementation. The settlement includes Toyota?s agreement to provide a Customer Support Program (?CSP?) for 2002-2019 model year (MY) vehicles originally equipped with certain Takata airbag inflators or repaired under a recall with Takata airbag inflators to provide coverage for repairs of the airbag inflator contained in the airbag module. This CSP letter is to help clarify how to administer this coverage in accordance with the settlement. This is NOT a recall or a campaign, but is provided to reassure owners that Toyota stands behind the reliability of our vehicles.
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10208995TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10204571TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10203533TSB: For proper calibration of the millimeter wave radar sensor, the vehicle and radar target must be on a level surface with a consistent plane. If a level surface with a consistent plane is not available, use the Floor Slope Compensation Procedure in this service bulletin in conjunction with the appropriate model and model year Repair Manual instructions when adjusting the millimeter wave radar sensor.
- 10203532TT: Some customers may encounter Bluetooth connectivity concerns such as: ?Difficulty to pair the phone. ?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
- 10201400TSB: Some 2006 ? 2022 model year Toyota vehicles in particular geographic areas may exhibit a condition where the HVAC evaporator drain hose has become obstructed with an insect nest. An insect repellent drain hose tip (ARINIX Tip) is available to help minimize future occurrences of this environmental condition. For some models, a new drain hose is required to properly fit the ARINIX Tip. Follow the procedures in this bulletin for proper handling and installation of this optional service part.
- 10198126OBSOLETE NOTICE May 04, 2021: This bulletin is now obsolete. Please see T-SB-0004-21.
- 10198125TSB: Some 2010 ? 2020 model year Sienna vehicles may exhibit a condition where the front door glass run on either the right-hand or left-hand side comes loose from the door channel during window operation. Follow the Repair Procedure in this bulletin to address this condition.
- 10197476Replacement vin plates.
Every Toyota Sienna model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.