2012 Toyota Sienna
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Sienna › 2012
These records cover every 2012 Toyota Sienna. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
9 recalls name the 2012 Toyota Sienna. Newest first.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2010-2016 4Runner, 2003-2006 Tundra, 2003-2013 Corolla, 2009-2010 Corolla Matrix, 2004-2005 RAV4, 2002-2007 Sequoia, 2011-2013 Sienna, 2008-2012 Scion xB, 2008-2009 Lexus IS-F, 2007-2012 Yaris and Lexus ES350, 2010-2017 Lexus GX460, 2002-2010 Lexus SC430, 2006-2012 Lexus IS250 and IS350…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Toyota will notify owners. Depending on the vehicle model, dealers will replace the front driver inflator, front passenger airbag inflator, the airbag assembly, or the front passenger airbag sub-assembly and inflator. The recall began November 20, 2019. Owners may contact Toyota customer service at 1-888-270-9371 or Lexus customer service at 1-800-255-3987. Toyota's numbers for this recall are J0A, J0B, and J0C. Lexus' numbers for this recall are JLI, JLJ, and JLK.
Vantage Mobility International, LLC (Vantage) is recalling certain 2012-2018 AMS Genesis wheelchair vans, built on a Toyota Sienna vehicles. The rubber brake hoses that attach to the rear wheel assembly may be too short, causing them to rub against the rear axle trailing arm.
Risk and remedy
Risk
The contact may cause failure of the rear brake hoses, resulting in a loss of vehicle control and reduced braking ability, increasing the risk of a crash.
Remedy
Vantage will notify owners, and dealers will install a set of rear brake hoses that will provide the proper clearance, free of charge. The recall began December 16, 2019. Owners may contact Vantage customer service at 1-800-488-9082.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2014-2016 Toyota 4Runner, 2014-2015 Scion xB, Lexus IS350C, IS250C, 2014 Toyota Sienna, Lexus IS-F, and 2014-2017 Lexus GX460 vehicles sold, or ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Toyota will notify owners. Depending on the vehicle model, dealers will replace the front passenger air bag inflator, or replace the air bag assembly. The recall began February 15, 2019. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are "Zone A" Toyota: G0P, Lexus: GLG; "Zone B" Toyota: G0R, Lexus GLH; "Zone C" Toyota: H0A, and Lexus: HLA.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2012 Toyota 4Runner, Corolla, Corolla Matrix, Sienna, Yaris, Scion xB, Lexus ES350, GX460, IS-F, IS250, IS350, IS250C, IS350C, and Lexus LFA vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas…
Risk and remedy
Risk
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Toyota will notify the Toyota, Scion and Lexus owners. General Motors will contact the Pontiac owners. Depending on the model, dealers will replace the passenger frontal air bag inflator or the air bag assembly, free of charge. The recall began on February 1, 2017. Owners may contact Toyota customer service at 1-800-331-4331, or Pontiac customer service at 1-800-762-2737. Toyota's numbers for final remedy for this campaign are G0P (Toyota Zone A), G0R (Toyota Zone B), H0A (Toyota Zone C), GLG (Lexus Zone A), GLH (Lexus Zone B) and HLA (Lexus Zone C).
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2011-2016 Toyota Sienna minivans manufactured January 4, 2010, to August 12, 2016. If the power sliding door is unable to be opened when commanded, such as if the door is frozen shut, the door may subsequently open unexpectedly, possibly while the vehicle is moving.
Risk and remedy
Risk
If door opens while the vehicle is moving, there would be an increased risk of injury to the vehicle occupants.
Remedy
Toyota will notify owners, and dealers will replace the junction block, rear sliding door wire harnesses, and install two sub wire harnesses, free of charge. The recall began on July 28, 2017. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is G04.
Southeast Toyota is recalling certain model year 2008 and 2010-2013 Toyota Tundra, 2010-2012 Rav4, 2012 Toyota Sequoia, 2010-2011 Toyota Corolla, 2010-2011 Toyota Camry and Camry Hybrid, 2010-2013 Toyota Highlander and Highlander Hybrid, 2010-2013 Toyota FJ Cruiser, 2011 Toyota Land Cruiser, 2010-2013 Toyota Venza, 2010-2011 Toyota 4Runner, 2010-2013 Toyota…
Risk and remedy
Risk
An inaccurate label could lead to owners overloading their vehicles and tires. An overloaded vehicle can result in a tire failure which may result in a vehicle crash, personal injury, or property damage.
Remedy
Southeast Toyota will notify owners and provide a corrected label with instructions concerning its installation. A small group of the affected vehicles will need additonal remedies which are still being developed. The recall began on May 28, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013…
Risk and remedy
Risk
If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. This could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.
Remedy
Southeast Toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on March 21, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Gulf states toyota IS recalling certain model year 2012 4runner and sienna vehicles, equipped with non-original equipment remote engine starters. a malfunction in the audiovox electronics brand remote engine starter module can prevent normal communication of the vehicles controller area network (can).
Risk and remedy
Risk
If this condition occurs, antilock braking and stability control may be lost, increasing the risk of a crash. Drivers should receive dashboard warning lights warning them of a malfunction.
Remedy
Gulf states toyota will notify owners, and dealers will replace the remote engine starter with a new one free of charge. the safety recall IS expected to begin on or about june 4, 2012. owners may contact toyota at 1-800-444-1074.
Toyota IS recalling certain model year 2011 through 2012 sienna vehicles for failing to comply with the requirements of federal motor vehicle safety standard number 110, "tire selections and rims." these vehicles do not meet the requirement for displaying the correct vehicle capacity weight as the rated load for the combination of cargo and occupants.
Risk and remedy
Risk
Incorrect information on the vehicle placard may lead to tire overloading and possibly cause tire failure increasing the risk of a crash.
Remedy
Toyota will notify owners, and will provide a remedy when it IS available. toyota will mail out a corrected placard to customers along with revised owner manual information. this service will be performed free of charge. the safety recall began on june 27, 2013. owners may contact toyota at 1-800-331-4331.
Owner complaints
247 complaints10 involved a crash4 involved a fire13 injuries
What owners report most
Latest complaints
- Structure › Body › Door · Structure › Body › Door › Hinge and attachments
The automatic side doors of this Toyota sienna le have malfunctioned twice between expensive repairs. When the hardware comes off the guide rail, it hits the window behind the door and shatters in covering the interior and occupants with glass. I had the window repaired after I had the door…
The automatic side doors of this Toyota sienna le have malfunctioned twice between expensive repairs. When the hardware comes off the guide rail, it hits the window behind the door and shatters in covering the interior and occupants with glass. I had the window repaired after I had the door hardware replaced after its first failure in spring of 2024. The door gave no indication it was failed until I noticed the window bulging and nearly broke again. The Toyota dealer didn’t seem very interested in covering the cost of the repairs I made in 2024 and can’t get me in until mid August which leaves me without transportation for a month.
- Structure
The contact owns a 2012 Toyota Sienna. The contact was unable to use the driver's side cargo door. The contact stated that the door was possibly frozen; however, while driving at an undisclosed speed, the door opened unexpectedly. The contact referenced NHTSA Campaign Number: 16V858000 (Structure)…
The contact owns a 2012 Toyota Sienna. The contact was unable to use the driver's side cargo door. The contact stated that the door was possibly frozen; however, while driving at an undisclosed speed, the door opened unexpectedly. The contact referenced NHTSA Campaign Number: 16V858000 (Structure); however, the VIN was not associated with the recall. The dealer was not contacted, and the vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 201,235.
- Engine
Coolant leaking from rear of the engine through the head gasket. Vehicle struggles to accelerate beyond 55mph or 80kmph. A quick search on the internet shows that this is a frequent occurrence in this 3.5L V6 engine from Toyota model years 2011 through 2017.
- Steering
The battery light came on suddenly and the power steering went out making it extremely difficult to steer the vehicle. An accident was narrowly avoided. We replaced the battery, alternator, and serpentine belt. The problem resolved for over 6 months, then reappeared. It starts with no issue, is…
The battery light came on suddenly and the power steering went out making it extremely difficult to steer the vehicle. An accident was narrowly avoided. We replaced the battery, alternator, and serpentine belt. The problem resolved for over 6 months, then reappeared. It starts with no issue, is charging properly, the serpentine belt is intact. The power steering will come on and go off sporadically, the only warning being the battery indicator on the dash that comes on first. This creates a substantial hazard and risk as the steering is severely impacted with little warning.
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2012 Toyota Sienna. The contact discovered a mileage discrepancy after the purchase. The vehicle was a private sale. At the time of purchase, the vehicle mileage was 48,230. It was later discovered that the mileage on the Title was 241,080.
- Electrical system
The power sliding door cables snap by itself and unable to open or closed. While my children and I were in the vehicle.
- Service brakes · Suspension · Unknown or other
My 2012 Toyota Sienna having problem while braking on highway 65mph or above, when i hit brake it's start shaking so bad and brake doesn't work properly. i believe it is sway bar link or lower control arm. even i had replaced once, it didn't helped and again i claimed warranty and replaced other set, but still having same issue.
- Tires
The contact owns a 2012 Toyota Sienna equipped with Michelin Tires, Tire Line: Cross Climate 2, Tire Size: 235/60/R17, DOT Number: (N/A). The contact stated sidewalls on all four tires were expanding, causing the tires to bubble and bulge outwardly. The dealer was not contacted. The contact…
The contact owns a 2012 Toyota Sienna equipped with Michelin Tires, Tire Line: Cross Climate 2, Tire Size: 235/60/R17, DOT Number: (N/A). The contact stated sidewalls on all four tires were expanding, causing the tires to bubble and bulge outwardly. The dealer was not contacted. The contact informed the tire shop where tires were purchased of the failures, and two tires were replaced. The contact was unsure what two tires were replaced. The manufacturer was made aware of the failure. The vehicle failure mileage was approximately 152,000 and the tire failure mileage was approximately 1,000. The VIN was not available.
- Wheels
On 8/22/2022 I had to replace the 2 front tires with MIM-Supreme Tour 18 inch tire 235/55R18. On 8/22/2022 I had 162,323 miles on the 2012 Toyota Sienna XLE 4 months later and 17,252 miles driven - the 2012 Toyota Sienna now has 179,575 miles and on 12/28/2023 the 2 front tires again have to be…
On 8/22/2022 I had to replace the 2 front tires with MIM-Supreme Tour 18 inch tire 235/55R18. On 8/22/2022 I had 162,323 miles on the 2012 Toyota Sienna XLE 4 months later and 17,252 miles driven - the 2012 Toyota Sienna now has 179,575 miles and on 12/28/2023 the 2 front tires again have to be replaced - Matrix Toyr RS 11 on 18 inch rims. Now its July 2024 - again 6 months and now 6,700 miles and just the front tires are bald and dangerous to drive if any moisture on the road. All these tires are slated for 50,000 miles and I and not getting even half the mileage. Most driving is on highways and regular maintenance occurs on the car. this car should be designed to go at least 25,000 miles ( so once a year ) on a set of tires. I do not drive fast nor aggressive.
- Seats
The third row passenger side split was stored and then put back up. Upon lifting the seats, pieces fell out (spring, washer, and screw) and the locking mechanism would not lock the seats into place. I am not sure how long these parts were loose, but it is a major safety hazard as the vehicle seat…
The third row passenger side split was stored and then put back up. Upon lifting the seats, pieces fell out (spring, washer, and screw) and the locking mechanism would not lock the seats into place. I am not sure how long these parts were loose, but it is a major safety hazard as the vehicle seat was not secured to the car as intended. We plan to to follow up with Toyota, but upon investigating, it seems that this is an issue for several 2011 Siennas. My Sienna was manufactured 4/2012. This is the smaller of the split seats, but out of an abundance of caution, we don't plan to use the 3rd row at all until a remedy is produced. Unfortunately, I saw only consumer complaints in regards to the 2011 3rd row seating issue and didn't see any solutions.
- Steering
My wife let me know that when turning to the right (not an aggressive turn, but a normal turn from one lane to the next), the whole electrical system of the minivan would shut down and then come back on. I had a mechanic check it out and they say that this is due to the electrical steering system…
My wife let me know that when turning to the right (not an aggressive turn, but a normal turn from one lane to the next), the whole electrical system of the minivan would shut down and then come back on. I had a mechanic check it out and they say that this is due to the electrical steering system and will have to be replaced by the dealer. He was able to reproduce the same condition where he was able to get the minivan to lose power when changing lanes. He STRONGLY advised that we should have the vehicle towed to the dealer as he felt that it wasn't safe to drive due to this. I feel that this will end up causing a lot of crashes and also that this should be covered by the manufacturer under a recall.
- Power train
Rear axle coupler assembly (part number 41303-28013) making very loud noise and vibration.
- Service brakes
The vehicle stability control activates and causes the car to slow and brake randomly. This occurs at low speeds and when the car is not skidding.
- Latches/locks/linkages › Doors › Latch · Structure
The contact owns a 2012 Toyota Sienna. The contact stated that the rear passenger side power sliding door cable broke. The driver-side power sliding door was malfunctioning. There was an abnormal clunking noise detected. The door failed to close with the automatic button. The contact had to…
The contact owns a 2012 Toyota Sienna. The contact stated that the rear passenger side power sliding door cable broke. The driver-side power sliding door was malfunctioning. There was an abnormal clunking noise detected. The door failed to close with the automatic button. The contact had to manually close the door. There were no warning indicator lights illuminated. The vehicle was taken to the local dealer where it was diagnosed that the door needed to be replaced and was informed the repair coverage had expired. The vehicle was not repaired. The manufacturer was not contacted. The failure mileage was unknown. The contact stated that the failure was related to NHTSA Campaign Number: 16V858000 (Structure).
- Unknown or other
We have had problems with our 2011 Sienna's electromagnetic coupling and the rear differential. Through my research, I have learned this is a very common problem with the Toyota Sienna. Appears the same problem occured in the RAV4 and a recall was issued, however an recall was not issued with the…
We have had problems with our 2011 Sienna's electromagnetic coupling and the rear differential. Through my research, I have learned this is a very common problem with the Toyota Sienna. Appears the same problem occured in the RAV4 and a recall was issued, however an recall was not issued with the Sienna. The repair is very expensive, upwards for $4,000 and we had two electromagnetic couplings fail. Are there any potential action items we can take with Toyota. Kind regards,
- Tires › Sidewall
10-01-2022 new tire blew out at I-10 , Columbus TX78934 4 new tires installed at 07-07-2022; YOKOHAMA YK-CTX; 235/60 R17 Invoice total cost $1085.76
- Air bags · Back over prevention › Warnings · Unknown or other
I was at a full stopped and rear Ended at 30 miles an hour and the air bags did not deploy and I am suffering many injuries pain and loss The air bags didn’t deploy at all
- Tires
Costco installed 4 tires on my 2012 Toyota Sienna on 11/10/2021. The tire had 80,000 mile warranty. At the time of Tire installation, the mileage on my vehicle was 253,405. I did my tire rotations every 5000 mile at Suburban Toyota in Farmington Hills. I took the vehicle for tire rotation at…
Costco installed 4 tires on my 2012 Toyota Sienna on 11/10/2021. The tire had 80,000 mile warranty. At the time of Tire installation, the mileage on my vehicle was 253,405. I did my tire rotations every 5000 mile at Suburban Toyota in Farmington Hills. I took the vehicle for tire rotation at 283,618 miles and the dealership refused to rotate the tires because the tread was below 3/32 seconds. I thought that this was a mistake and went again to rotate the tires at 288,789 miles. I went to Costco on the same day and told Costco representative at the counter [XXX] that the tire needs to replaced under warranty. I informed him that I drove only 30,000 mile on the tires. He checked all my mileage papers when I did the tire rotations. He went inside and talked to [XXX] (Tire section manager) and told me that the tire need to be under 2/32 seconds for Michelin Warranty to work. I asked him to arrange a tire rotation and scheduled the tire rotation on 12/20/2022. I took the vehicle to Costco on 12/20/2022. The mechanic called me after 30 minutes and informed me that the tire tread is under 2/32 second and cannot be rotated. I talked to [XXX] about it and he went to talk to [XXX]. He told me that the mechanic is going to rotate the tires and I can come back after one month to check the tires again. I informed [XXX] that he, Costco, and Michelin are playing with the safety of my family. He told me that Costco is not concerned about the safety of my family. If I am concerned about the safety of my family, I should change the tires without the warranty. I believe that Costco and Michelin are installing 30,000 mile tires as 80,000 mile warranty tires. I drive most of my driving on the freeway and on cruise control. So there should not be any issue with my driving. I got tires from Discount Tire Company before and had no issue like this. I request NHSTB to investigate the issue and warn people of this issue before people die. INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
- Electrical system · Engine
The engine stalled, power steering frozen then engine shut off while driving in an intersection. Replaced new battery, dove home upon arrival the engine stalled again, power steering frozen and engine shut off again. I don’t know what’s going on.
- Unknown or other
Vehicle has a whining grinding noise, after having it serviced at Toyota Dealership, the finding has been a known issue for a few years: Rear Differential Viscous Coupling gone bad. If this is the same set up as the Toyota Rav and they issued a recall on it, What is the issue with not calling…
Vehicle has a whining grinding noise, after having it serviced at Toyota Dealership, the finding has been a known issue for a few years: Rear Differential Viscous Coupling gone bad. If this is the same set up as the Toyota Rav and they issued a recall on it, What is the issue with not calling it for the Sienna's, especially when its a very known problem? Its a complete RIPOFF to the public, and something truly must be done. Thank you.
- Power train › Driveline › Differential unit
The contact owns a 2012 Toyota Sienna. The contact stated that the rear differential was making an abnormal whirling and grinding sound. There were no warning lights illuminated. The contact called the local dealer but the vehicle was not diagnosed or repaired. The manufacturer was notified of the failure and referred the contact to NHTSA. The approximate failure mileage was 79,000.
- Power train
Vehicle began 'whirring' metal noise from underneath. Local mechanic said it was coming from rear differential. I took it to a Toyota dealer, they said rear differential coupler needs replacing ($2159) and drive shaft ($992). It seems the bearing ring inside this sealed unit has failed. Noise is…
Vehicle began 'whirring' metal noise from underneath. Local mechanic said it was coming from rear differential. I took it to a Toyota dealer, they said rear differential coupler needs replacing ($2159) and drive shaft ($992). It seems the bearing ring inside this sealed unit has failed. Noise is continuous while driving, concern of part failure - we are taking vehicle on family vacation. Researching on - line it appears to be common problem with the Sienna's. Toyota had same issue with RAV 4's and issued recall but have not for the Sienna's. I called Toyota corporate in TX (got up 3 levels) to no avail, and it curt tone, they said they cannot help. Based on other similar stories on line from other Sienna owners, this seems to be a common very expensive design flaw problem with this vehicle.
- Wheels
We realized that our vehicle had a flat tire. When we went to attempt to put on the spare, we noticed that all of the lug nuts had "swollen" and none of the lug nuts would fit in the corresponding socket. ultimately, the lug nut caps delaminated, and it took over an hour to tear the caps from…
We realized that our vehicle had a flat tire. When we went to attempt to put on the spare, we noticed that all of the lug nuts had "swollen" and none of the lug nuts would fit in the corresponding socket. ultimately, the lug nut caps delaminated, and it took over an hour to tear the caps from the nuts. If this had happened on the side of the highway, addressing this issue would have been incredibly dangerous. it does not seem to make sense to continue using lug nuts with decorative caps for aesthetic reasons while impacting the safety of drivers with flat tires.
- Wheels
Front tires wear out too fast on this vehicle. I purchased vehicle around 60K miles. Now at 130K and on 4TH set of tires. All michelin/top quality from costco. Rotations at 5-7K religiously. Front end suspension/steering in good shape/parts replaced when wear IS seen. Alignment good. Horrible. Wear IS on outer edges of both front tires.
- Unknown or other
My spare tire cable rusted and the tire fell of and I ran over it.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10224108TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10220183TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10217806CSP: Takata CSP Coverage Job Aid - published 7.28.2022
- 10217804CSP: On July 30, 2018, a settlement of claims for Economic Loss related to Takata airbag inflators was approved for full implementation. The settlement includes Toyota?s agreement to provide a Customer Support Program (?CSP?) for 2002-2019 model year (MY) vehicles originally equipped with certain Takata airbag inflators or repaired under a recall with Takata airbag inflators to provide coverage for repairs of the airbag inflator contained in the airbag module. This CSP letter is to help clarify how to administer this coverage in accordance with the settlement. This is NOT a recall or a campaign, but is provided to reassure owners that Toyota stands behind the reliability of our vehicles.
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10208995TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10204571TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10203533TSB: For proper calibration of the millimeter wave radar sensor, the vehicle and radar target must be on a level surface with a consistent plane. If a level surface with a consistent plane is not available, use the Floor Slope Compensation Procedure in this service bulletin in conjunction with the appropriate model and model year Repair Manual instructions when adjusting the millimeter wave radar sensor.
- 10203532TT: Some customers may encounter Bluetooth connectivity concerns such as: ?Difficulty to pair the phone. ?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
- 10201400TSB: Some 2006 ? 2022 model year Toyota vehicles in particular geographic areas may exhibit a condition where the HVAC evaporator drain hose has become obstructed with an insect nest. An insect repellent drain hose tip (ARINIX Tip) is available to help minimize future occurrences of this environmental condition. For some models, a new drain hose is required to properly fit the ARINIX Tip. Follow the procedures in this bulletin for proper handling and installation of this optional service part.
- 10198126OBSOLETE NOTICE May 04, 2021: This bulletin is now obsolete. Please see T-SB-0004-21.
- 10198125TSB: Some 2010 ? 2020 model year Sienna vehicles may exhibit a condition where the front door glass run on either the right-hand or left-hand side comes loose from the door channel during window operation. Follow the Repair Procedure in this bulletin to address this condition.
- 10197494Technician Certification Requirements.
Every Toyota Sienna model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.