2008 Toyota Sienna
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Sienna › 2008
These records cover every 2008 Toyota Sienna. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
9 recalls name the 2008 Toyota Sienna. Newest first.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010…
Risk and remedy
Risk
If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
Remedy
SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion…
Risk and remedy
Risk
Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
Remedy
SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2004-2011 Sienna vehicles originally sold in, or currently registered in, Connecticut, Delaware, Illinois, Indiana, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West…
Risk and remedy
Risk
If the carrier cable is corroded due to road salt, the spare tire may separate from the vehicle, increasing the risk of a crash.
Remedy
Toyota sent owners in August 2014 an interim notification to advise owners of the recall and that dealers will perform an interim remedy to remove the spare tire and relocate it to the luggage compartment, free of charge. Owners are being mailed a second letter as parts become available and dealers will replace the spare tire carrier assembly with an improved one, free of charge. The remedy campaign is being performed in phases. The first phase of the recall began July 7, 2015. Owners may contact Toyota customer service at 1-800-331-4331. NOTE: 2004-2010 Siennas subject to this recall were subject to recall campaign 10V-160 initiated in 2010. Those owners are advised that they must have their vehicles remedied again under this campaign and that having the earlier recall completed did not remedy their vehicles. Additionally, model year 1998-2003 Siennas were recalled as part of safety recall 10V-160. Owners of those vehicles that have not had not the remedy performed on their vehicles, should contact their Toyota dealer to schedule a free repair.
Toyota is recalling certain model year 2004-2005 Sienna vehicles manufactured January 10, 2003, through August 10, 2005; and model year 2007-2009 Sienna vehicles manufactured February 20, 2007, through December 12, 2008. In the affected vehicles, due to a problem within the shift lock solenoid, there is a possibility that the shift lever could be moved out…
Risk and remedy
Risk
If the shift lever is moved out of the Park position without the brake applied, the transmission will either engage a drive gear or Neutral, increasing the risk of a backover or roll away crash.
Remedy
Toyota will mail interim notifications to owners beginning in late October 2013. When parts are available, owners will be sent a second notice and dealers will replace the shift lock solenoid, free of charge. Owners may contact Toyota at 1-800-331-4331.
Toyota IS recalling certain model year 1998 through 2010 sienna passenger vehicles manufactured between august 7, 1997 and january 4, 2010, currently registered in or originally sold in connecticut, delaware, illinois, indiana, kentucky, maine, maryland, massachusetts, michigan, minnesota, new hampshire, new jersey, new york, ohio, pennsylvania, rhode…
Risk and remedy
Risk
The cable may break due to excessive corrosion and the spare tire may separate from the vehicle, possibly resulting in a vehicle crash.
Remedy
Toyota will notify owners with an interim letter initially instructing them to bring their vehicle to authorized dealers to inspect for corrosion. a second notice will be sent when the permanent remedy IS available. for more information, please see toyota's amended recall report of july 19, 2010. the safety recall IS expected to begin on october 12, 2010. owners may contact toyota at 1-800-331-4331.
Gulf states toyota IS recalling certain model year 2005-2010 vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold between september 1, 2005 and june 2, 2008 without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
This does not meet the standard requirements.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. Dealers will also correct the owner's manual. the safety recall began on may 27, 2010. owners may contact gulf states toyota at 713-580-3300.
Southeast toyota IS recalling certain model year 2005-2011 passenger vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
A driver may overload a vehicle which may increase the risk of a crash.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. the safety recall began on may 27, 2010. owners may contact southeast toyota at 1-800-301-6859.
Toyota IS recalling certain model year 2006 through 2009 sienna and 2009 lexus GX passenger vehicles. the vehicle capacity weight on the tire and loading information label and the gvwr on the certification label IS insufficient for certain vehicles. some vehicles were accessorized through vehicle processing centers and had accessories installed that…
Risk and remedy
Risk
The gvwr IS insufficient for the load carrying capacity of the vehicles.
Remedy
Toyota will notify owners instructing them to return their vehicle to a toyota or lexus dealer for an exchange of the certification label and the tire and loading information label, an installation of the load carrying capacity modification label, if necessary, and a correction to the owner's manual. this remedy will be performed free of charge. the safety recall began on december 10, 2009. owners may contact toyota at 1-888-270-9371.
Toyota IS recalling 27,080 model year 2005 through 2010 passenger cars built from september 1, 2005 to may 4, 2009. these vehicles were not equipped with load carrying capacity modification labels which fails to conform with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims."
Risk and remedy
Risk
Incorrect load carrying capacity modification labels could result in the vehicle being overloaded, increasing the risk of a crash.
Remedy
Toyota will notify owners and provide them with a new, accurate label to be installed over the inaccurate label free of charge. the safety recall began on august 18, 2009. owners may contact toyota at 1-888-270-9371.
Owner complaints
429 complaints37 involved a crash4 involved a fire19 injuries
What owners report most
Latest complaints
- Latches/locks/linkages › Doors › Latch
The contact owns a 2008 Toyota Sienna. The contact stated that while driving at an undisclosed speed, the rear passenger’s side sliding door independently unlatched and opened. The vehicle was taken to a local dealer where unknown repairs were performed. The contact stated that several years later…
The contact owns a 2008 Toyota Sienna. The contact stated that while driving at an undisclosed speed, the rear passenger’s side sliding door independently unlatched and opened. The vehicle was taken to a local dealer where unknown repairs were performed. The contact stated that several years later the failure reoccurred. The local dealer was not contacted. The manufacturer was not made aware of the failure. The failure mileage was approximately 20,000.
- Firerelated
The contact owned a 2008 Toyota Sienna. The contact stated that while he was away, the fire department called to notify him that his vehicle had caught fire while parked in the driveway. The contact's neighbor was alerted to the fire by the vehicle's alarm system and called the fire department. The…
The contact owned a 2008 Toyota Sienna. The contact stated that while he was away, the fire department called to notify him that his vehicle had caught fire while parked in the driveway. The contact's neighbor was alerted to the fire by the vehicle's alarm system and called the fire department. The fire department extinguished the fire but was unable to determine the cause of the fire. A fire department report was filed. The fire destroyed the interior of the vehicle. The insurance company was made aware of the failure, but had not yet deemed the vehicle totaled. The vehicle remained in the driveway. The contact stated that the vehicle was an equipped BraunAbility handicap wheelchair ramp van. The contact also stated that prior to the fire, the vehicle had no failure and no warning light was illuminated. In addition, The fire wall of the engine performed as designed and protected the engine, although the interior of the vehicle was severely damaged as a result of the fire. The manufacturer was not made aware of the failure. The failure mileage was approximately 107,000.
- Vehicle speed control
Throttle stuck while in reverse pulling out of a parking spot and accelerated resulting in backing into the building
- Service brakes · Steering · Vehicle speed control
I have had the traction control go on while driving on the highway even when I turn it off. Sometimes the VSC and TRAC OFF lights go on while driving. The roads are dry. Whenever I take it in to the mechanic, all the lights are off. They pulled a zero calibration code and recalibrated. It still…
I have had the traction control go on while driving on the highway even when I turn it off. Sometimes the VSC and TRAC OFF lights go on while driving. The roads are dry. Whenever I take it in to the mechanic, all the lights are off. They pulled a zero calibration code and recalibrated. It still kept happening. Then I was driving around a curve on highway speeds when the traction control light went on and the van suddenly braked on its own and I almost lost control. The tires are new and the roads were dry.
- Unknown or other
ODOMETER - FALSE - REPORTING -MONTANA TITLE - SIGNED AND NOTARIZED BY SELLER (CARVANA) "Federal and State State Law require that the owner state the mileage of a vehicle upon transfer of ownership. If you fail to complete this disclosure or provide a false statement, you may be subject to fines…
ODOMETER - FALSE - REPORTING -MONTANA TITLE - SIGNED AND NOTARIZED BY SELLER (CARVANA) "Federal and State State Law require that the owner state the mileage of a vehicle upon transfer of ownership. If you fail to complete this disclosure or provide a false statement, you may be subject to fines and/or imprisonment." We were sold Toyota Sienna 110477 miles, however the odometer reads 206625 miles. We reached out to Carvana to resolve the issue, they refused. -CARFAX History -PIC OF ODOMETER -Copy of the TITLE notarized false miles -Bill of Sale Thank You, AWAN AUTO GROUP
- Engine
The head gasket that was repaired failed and the radiator system also failed. Im not sure if these issues are dealer related or manufacture related as i spoke to the previous owner and they stated they had the vehicle serviced at a manufacturer prior to doing a trade in with the dealer
- Visibility/wiper
The material used by Toyota to manufacture the dash is breaking down. Toyota is aware of this issue due to cracking and offered a limited extended warranty which I never received any notification (and many others did not per Toyota's chat forum). Cracking I can deal with. But now the material is…
The material used by Toyota to manufacture the dash is breaking down. Toyota is aware of this issue due to cracking and offered a limited extended warranty which I never received any notification (and many others did not per Toyota's chat forum). Cracking I can deal with. But now the material is continuing to break down and a thick sticky liquid is separating and rising to the surface creating a terrible sheen. When exposed to direct sunlight the visibility through the front windshield is dangerously low. The road basically disappears. I brought this to the attention of Toyota Brand Engagement Center on Nov. 10. 2023 (File #231110000552). I requested Toyota do the right thing, update their response policy, and authorize a dash replacement at a local Toyota dealership, but they refused based on the response policy they had established many years ago even after I explained the situation is not just cosmetic any longer. I explained the sudden loss of visibility and how incredibly dangerous and frightening it was, but they still refused to address the issue, so I am forced to bring this to your attention. Based on the Toyota's forum this is a widespread issue through several model years. Based on my experience I am confident there will be many accidents due to this manufacturing defect. Please investigate and request Toyota do the right thing to protect their customers.
- Power train
The contact owns a 2008 Toyota Sienna. The contact stated while driving 60 MPH, the vehicle unintendedly accelerated at a high rate of speed. There was no warning light illuminated. The contact desperately pressed on the brake pedal, but the vehicle would not slow down. The contact shifted the gear…
The contact owns a 2008 Toyota Sienna. The contact stated while driving 60 MPH, the vehicle unintendedly accelerated at a high rate of speed. There was no warning light illuminated. The contact desperately pressed on the brake pedal, but the vehicle would not slow down. The contact shifted the gear lever into neutral and the vehicle slowed down. The contact was able to pull over on the side of the road and shutoff the vehicle. The vehicle was restarted and operated normally. The dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not contacted. The failure mileage was 178,000.
- Electrical system · Steering
Issues with VSC. The sensor alarm goes off when driving at more than 50 mph and slightly turning the steering wheel. The car brakes itself and this is DANGEROUS. It happens all the time, it has been more than 5-6 years and we are to the point of not using the car on the freeway to prevent a…
Issues with VSC. The sensor alarm goes off when driving at more than 50 mph and slightly turning the steering wheel. The car brakes itself and this is DANGEROUS. It happens all the time, it has been more than 5-6 years and we are to the point of not using the car on the freeway to prevent a potential fatal accident. I found posts describing the same issue with this model of Toyota. Car should be recalled to get this fixed.
- Engine
The contact owns a 2008 Toyota Sienna. The contact stated while pulling into a grocery store, he heard an abnormal ticking sound. The contact stated upon parking and inspecting the outside of the vehicle, he noticed that engine oil was leaking onto the ground. Additionally, the oil dipstick was dry…
The contact owns a 2008 Toyota Sienna. The contact stated while pulling into a grocery store, he heard an abnormal ticking sound. The contact stated upon parking and inspecting the outside of the vehicle, he noticed that engine oil was leaking onto the ground. Additionally, the oil dipstick was dry upon inspecting the oil level. There was no warning light illuminated. The vehicle was taken to a local Pep Boys where oil was added in the vehicle and the contact drove to his residence. However, the failure persisted while driving. The vehicle was towed to the dealer where it was diagnosed that the exhaust cam gear had fractured, causing damage to the engine and other unnamed components. The dealer diagnosed that the engine, the exhaust cam gear, and the timing chain needed to be replaced, and additional unknown repairs were also needed. The vehicle was not repaired. The contact related the failure to an unknown Toyota Extended Warranty. The manufacturer was notified of the failure and informed the contact that they could not assist due to the vehicle manufactured date. The failure mileage was approximately 204,000.
- Service brakes · Steering · Unknown or other
The Vehicle VSC Engaged multiple times even at low speed of 30 mph under the road speed limit. The brake applied and even the vehicle stop to respond to the acceleration. We have 3 little kids and old parents in this vehicle.Toyota should own this problem and fix it free of charge as a factory recall.
- Electrical system · Forward collision avoidance › Automatic emergency braking · Service brakes
Driving on dry pavement in mountainous terrain the slip indicator light/sound activates temporarily and the brakes can engage by themselves! Usually happens during right turns. I've been to several automotive specialists for mechanical & electronic diagnosis. I've replaced the lower control arm &…
Driving on dry pavement in mountainous terrain the slip indicator light/sound activates temporarily and the brakes can engage by themselves! Usually happens during right turns. I've been to several automotive specialists for mechanical & electronic diagnosis. I've replaced the lower control arm & the clock spring behind the steering wheel but the issue persists. Online searches indicate this is a common problem with Toyota siennas that is extremely difficult to diagnose & very costly to replace all the possible problematic components! I've had this problem since buying the car used several months ago.This should be a recall issue!!!!!!!!!!!
- Power train
The transmission shift cable broke during parking. Although the transmission shift lever was moved to the park position, the transmission was not placed in park. The first observation was the vehicle started to roll when the driver was loading the purchases at a store. The parking brake was…
The transmission shift cable broke during parking. Although the transmission shift lever was moved to the park position, the transmission was not placed in park. The first observation was the vehicle started to roll when the driver was loading the purchases at a store. The parking brake was then applied. Then the vehicle engine could not be started, regardless of where the shift lever was positioned. The vehicle was towed to an independent auto service provider. The provider identified the problem as the transmission still in the reverse position and replaced a $10 bushing on the transmission cable with a labor charge of $510.
- Service brakes
Vehicle starting beebing and automatically engaged abs braking on highway. Dry and clear.
- Steering
The traction control light is coming on during low speed turns on dry pavement.
- Tires › Temporary/emergency spare tire
The contact owns a 2008 Toyota Sienna. The contact stated while driving approximately 15 MPH, the spare tire hatch control cable snapped and dropped the spare tire onto the roadway. The vehicle rode over the spare tire on the passenger’s side rear wheel causing a jolt to the vehicle. The contact…
The contact owns a 2008 Toyota Sienna. The contact stated while driving approximately 15 MPH, the spare tire hatch control cable snapped and dropped the spare tire onto the roadway. The vehicle rode over the spare tire on the passenger’s side rear wheel causing a jolt to the vehicle. The contact pulled off the road safely and determined that the vehicle was drivable. The contact had not taken the vehicle to a dealer or independent mechanic to be diagnosed or repaired. The manufacturer had been informed of the failure. The failure mileage was approximately 195,000.
- Fuel/propulsion system · Service brakes
The vsc begins to beep and then the car sometimes applies brakes, or the motor seems to lug. This can happen at any any speed. This has been happening for years and is becoming more frequent.
- Electrical system · Service brakes · Vehicle speed control
Anti skid/slip malfunctions, Brakes are automatic applied while turning a corner. When this happen one dry road surfaces it was harder to control the car. This happen multiple times in the pass. Yes my safety and others on the road was put at risk. Yes been confirmed by independent service centers. 4.) UNKNOWN 5).No. The warning indicator light and buzzer comes on at the time the incident happens.
- Service brakes
The dashboard lights up. abs and traction control light, vsc and brake. It seems like the bushings by the rack and pinion become loose and leads to random brake failure.
- Service brakes · Steering · Vehicle speed control
2008 Toyota Sienna. Driving down steep right turns, VSC light comes on, urgent beeping alarm and tires grip and grip vehicle brakes going 20-30+ mph on dry road. Very scary and dangerous, and has continues repeatedly over the past year on curvy right turns. Local mechanics don't know what is wrong…
2008 Toyota Sienna. Driving down steep right turns, VSC light comes on, urgent beeping alarm and tires grip and grip vehicle brakes going 20-30+ mph on dry road. Very scary and dangerous, and has continues repeatedly over the past year on curvy right turns. Local mechanics don't know what is wrong with the vehicle. Many Sienna owners have similar problems listed on Carguru. https://www.cargurus.com/Cars/Discussion-c9152_ds656326 Please insist on a manufacturing recall for this vehicle. It is unsafe and could easily cause an accident. Thank you. Concerned original car owner.
- Engine · Vehicle speed control
Car speed varies when doing a moderate speed example 40 mph sometimes feels like its engine slips and speed slows car jumps forward feels like engine slips or gear shifts. Engine bogs down or sometimes revs up a little..scares me sometimes but no choice but to drive
- Electrical system
When using heated seat feature drivers side remains heated even long after being off. Have checked fuses and still same only use seasonal. sometimes feels like heat IS on when not in use
- Electrical system · Vehicle speed control
Brakes have been replaced, and checked several times make a loud grinding noise in wet weather when backing up and sometimes when applying pressure while driving also a 🔊 noise and brakes seem to slip have had to pull over because it scares me can not find anything wrong but continues to persist. Both in highway driving and regular street driving
- Service brakes · Steering · Vehicle speed control
While on an on-ramp; the vehicle at about 35 mph started blinking the slip light and slowed the van down, also causing I think the brakes to engage with force. Happens while driving normally and on ramps. I had the rack and pinion replaced and still has done this.
- Service brakes · Steering · Vehicle speed control
The vehicle stability control will unexpectedly engage in instances where it shouldn't activate. The most common IS a long, slight curve on at freeway speeds on dry pavement. The second most common scenario IS accelerating to enter the freeway. When vsc engages, the vehicle will lurch to the side…
The vehicle stability control will unexpectedly engage in instances where it shouldn't activate. The most common IS a long, slight curve on at freeway speeds on dry pavement. The second most common scenario IS accelerating to enter the freeway. When vsc engages, the vehicle will lurch to the side it was activated on and curtail any acceleration. this makes the vehicle hard to control when on a freeway curve and when attempting to accelerate to merge onto the freeway, causing unexpected motion that IS a hazard to remaining on the road or causing the vehicle to be in an accident with other vehicles. There IS no indication that there are malfunctions in any system that would cause this to occur. Note: mileage on the odometer IS ~170,000 miles.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10210375TSB: This Service Bulletin includes procedures to replace damaged or loose front carpet floor retainer(s) without replacing the carpet assembly. Follow the Repair Procedure in this bulletin to replace the loose or damaged carpet floor retainer(s).
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10207937TI: LSC 90K Expired on December 31, 2021
- 10204571TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10203532TT: Some customers may encounter Bluetooth connectivity concerns such as: ?Difficulty to pair the phone. ?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
- 10197492Warranty enhancement program.
- 10197491Warranty enhancement program.
- 10197476Replacement vin plates.
- 10197473Product general information.
- 10190460Toyota Safety Recall and Service Campaign - Technician Certification Requirements
- 10190453TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10190449OBSOLETE NOTICE March 08, 2021: This bulletin is now obsolete. Please see T-SB-0044-16.
- 10188913TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2021 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
Every Toyota Sienna model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.