2007 Toyota Sienna
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Sienna › 2007
These records cover every 2007 Toyota Sienna. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
10 recalls name the 2007 Toyota Sienna. Newest first.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2005-2007 and 2009-2010 Toyota Sienna vehicles. In the affected vehicles, due to a problem within the shift lock assembly, the shift lever may be moved out of the 'Park' position without depressing the brake pedal.
Risk and remedy
Risk
If the shift lever can be moved from the "Park" position without depressing the brake pedal and the parking brake is not applied, the vehicle may roll, increasing the risk of a crash.
Remedy
Toyota will notify owners, and dealers will replace the shift lock solenoid and reapply the grease, free of charge. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is H0V. Vehicles that were previously recalled under campaign 13V-429 are not affected by this recall.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010…
Risk and remedy
Risk
If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
Remedy
SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion…
Risk and remedy
Risk
Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
Remedy
SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2004-2011 Sienna vehicles originally sold in, or currently registered in, Connecticut, Delaware, Illinois, Indiana, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West…
Risk and remedy
Risk
If the carrier cable is corroded due to road salt, the spare tire may separate from the vehicle, increasing the risk of a crash.
Remedy
Toyota sent owners in August 2014 an interim notification to advise owners of the recall and that dealers will perform an interim remedy to remove the spare tire and relocate it to the luggage compartment, free of charge. Owners are being mailed a second letter as parts become available and dealers will replace the spare tire carrier assembly with an improved one, free of charge. The remedy campaign is being performed in phases. The first phase of the recall began July 7, 2015. Owners may contact Toyota customer service at 1-800-331-4331. NOTE: 2004-2010 Siennas subject to this recall were subject to recall campaign 10V-160 initiated in 2010. Those owners are advised that they must have their vehicles remedied again under this campaign and that having the earlier recall completed did not remedy their vehicles. Additionally, model year 1998-2003 Siennas were recalled as part of safety recall 10V-160. Owners of those vehicles that have not had not the remedy performed on their vehicles, should contact their Toyota dealer to schedule a free repair.
Toyota is recalling certain model year 2004-2005 Sienna vehicles manufactured January 10, 2003, through August 10, 2005; and model year 2007-2009 Sienna vehicles manufactured February 20, 2007, through December 12, 2008. In the affected vehicles, due to a problem within the shift lock solenoid, there is a possibility that the shift lever could be moved out…
Risk and remedy
Risk
If the shift lever is moved out of the Park position without the brake applied, the transmission will either engage a drive gear or Neutral, increasing the risk of a backover or roll away crash.
Remedy
Toyota will mail interim notifications to owners beginning in late October 2013. When parts are available, owners will be sent a second notice and dealers will replace the shift lock solenoid, free of charge. Owners may contact Toyota at 1-800-331-4331.
Toyota IS recalling certain model year 1998 through 2010 sienna passenger vehicles manufactured between august 7, 1997 and january 4, 2010, currently registered in or originally sold in connecticut, delaware, illinois, indiana, kentucky, maine, maryland, massachusetts, michigan, minnesota, new hampshire, new jersey, new york, ohio, pennsylvania, rhode…
Risk and remedy
Risk
The cable may break due to excessive corrosion and the spare tire may separate from the vehicle, possibly resulting in a vehicle crash.
Remedy
Toyota will notify owners with an interim letter initially instructing them to bring their vehicle to authorized dealers to inspect for corrosion. a second notice will be sent when the permanent remedy IS available. for more information, please see toyota's amended recall report of july 19, 2010. the safety recall IS expected to begin on october 12, 2010. owners may contact toyota at 1-800-331-4331.
Gulf states toyota IS recalling certain model year 2005-2010 vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold between september 1, 2005 and june 2, 2008 without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
This does not meet the standard requirements.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. Dealers will also correct the owner's manual. the safety recall began on may 27, 2010. owners may contact gulf states toyota at 713-580-3300.
Southeast toyota IS recalling certain model year 2005-2011 passenger vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
A driver may overload a vehicle which may increase the risk of a crash.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. the safety recall began on may 27, 2010. owners may contact southeast toyota at 1-800-301-6859.
Toyota IS recalling certain model year 2006 through 2009 sienna and 2009 lexus GX passenger vehicles. the vehicle capacity weight on the tire and loading information label and the gvwr on the certification label IS insufficient for certain vehicles. some vehicles were accessorized through vehicle processing centers and had accessories installed that…
Risk and remedy
Risk
The gvwr IS insufficient for the load carrying capacity of the vehicles.
Remedy
Toyota will notify owners instructing them to return their vehicle to a toyota or lexus dealer for an exchange of the certification label and the tire and loading information label, an installation of the load carrying capacity modification label, if necessary, and a correction to the owner's manual. this remedy will be performed free of charge. the safety recall began on december 10, 2009. owners may contact toyota at 1-888-270-9371.
Toyota IS recalling 27,080 model year 2005 through 2010 passenger cars built from september 1, 2005 to may 4, 2009. these vehicles were not equipped with load carrying capacity modification labels which fails to conform with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims."
Risk and remedy
Risk
Incorrect load carrying capacity modification labels could result in the vehicle being overloaded, increasing the risk of a crash.
Remedy
Toyota will notify owners and provide them with a new, accurate label to be installed over the inaccurate label free of charge. the safety recall began on august 18, 2009. owners may contact toyota at 1-888-270-9371.
Owner complaints
364 complaints29 involved a crash6 involved a fire47 injuries2 deaths
What owners report most
Latest complaints
- Engine and engine cooling · Power train
The contact owns a 2007 Toyota Sienna. While the contact’s wife was pulling into the parking space, the transmission shifter was shifted into park(P), and the vehicle suddenly rolled forward approximately four feet. The parking brake was activated, preventing the vehicle from crashing into a parked…
The contact owns a 2007 Toyota Sienna. While the contact’s wife was pulling into the parking space, the transmission shifter was shifted into park(P), and the vehicle suddenly rolled forward approximately four feet. The parking brake was activated, preventing the vehicle from crashing into a parked vehicle. The vehicle was towed to the residence. While examining the vehicle, the contact determined that the shifter cable bushing had failed and needed to be replaced. The vehicle was not yet repaired. The manufacturer and local dealer were notified of the failure. Additionally, previously while driving there was smoke coming from the engine compartment and the vehicle stalled. The vehicle was towed to the local mechanic who diagnosed the vehicle and determined that the oil cooler line had failed causing engine oil to spill from the engine. The rubber oil cooler line was replaced with an updated improved oil cooler line, and the vehicle was repaired. The failure mileage was 170,000.
- Unknown or other
Something under the hood caught on fire while I was driving with my son, and I pulled over. I was stopped at a red light when I first noticed smoke when I was looking in the rearview mirror. The gauges and lights never indicated anything was wrong, which I was looking at while the car was smoking…
Something under the hood caught on fire while I was driving with my son, and I pulled over. I was stopped at a red light when I first noticed smoke when I was looking in the rearview mirror. The gauges and lights never indicated anything was wrong, which I was looking at while the car was smoking and I was trying to find a place to pull over. There was smoke billowing up from the hood and all around and in the back of the van. By the time the fire department got the fire out, most of the front was melted. When pulling over the brakes were hardly responsive. The vehicle is at the wrecker and has not been inspected.
- Engine · Power train · Unknown or other
As a result of the transmission cooler being a part of the radiator system, the transmission cooler ruptured while driving causing immediate loss of power and the engine to overheat. This malfunction also caused coolant and transmission oil to contaminate the engine compartment as well as the…
As a result of the transmission cooler being a part of the radiator system, the transmission cooler ruptured while driving causing immediate loss of power and the engine to overheat. This malfunction also caused coolant and transmission oil to contaminate the engine compartment as well as the transmission. This is a major iengineering flaw and safety issue as I was on the interstate when it happened and was stranded on the side of the highway until help could be obtained.
- Service brakes
In areas where there is snow and salt, the rear steel brake lines start to rust from snow and debris that accumulates and eventually the brake lines fail leaving you without brakes.
- Suspension · Vehicle speed control
When the VSC light or the traction light comes on the alarm sounds and the the van brakes for me! It can be up hill or down hills, between 30mph-70mph, left or right curves. Thas happend on dry pavement, It is dangerous because the Van braking suddenly for me and dont let me accelerate.
- Suspension · Vehicle speed control
Slid warning light, VSC comes on randomly. Has been happening beginning at 110K miles. Taken to dealership and reported durning normal service. I worked at a Toyota dealer. Front end suspension has been rebuilt. CV shafts replaced. Rock solid. Dangerous as the VSC system engages and the slid…
Slid warning light, VSC comes on randomly. Has been happening beginning at 110K miles. Taken to dealership and reported durning normal service. I worked at a Toyota dealer. Front end suspension has been rebuilt. CV shafts replaced. Rock solid. Dangerous as the VSC system engages and the slid light comes on, tire speed control engages, happens in a normal 70mph easy turn on the expressway. No codes stored. Only warning lights and VSC actions engaging for no reason.
- Engine · Service brakes, hydraulic › Antilock/traction control/electronic limited slip › Abs warning light
The contact owns a 2007 Toyota Sienna. The contact stated while driving 40 MPH going up a curvy road, the ABS service warning light illuminated, and the vehicle lost motive power for several seconds before independently regaining motive power. The contact stated that the failure was intermittent.…
The contact owns a 2007 Toyota Sienna. The contact stated while driving 40 MPH going up a curvy road, the ABS service warning light illuminated, and the vehicle lost motive power for several seconds before independently regaining motive power. The contact stated that the failure was intermittent. The contact took the vehicle to a local dealer to be diagnosed however, the mechanic was unable to retrieve a fault code. The manufacturer was not made aware of the failure. The failure mileage was approximately 160,000.
- Tires · Tires › Pressure monitoring and regulating systems
I purchase these tires 07/21/2021 (215/ R16) in the amount of $387.14 from Discount tire at 875 S. Randall RD Elgin IL , after I purchase the tires TPMS- indicator dash light kept coming on i was going back to Discount tire almost 3x a week as of today date I'm losing 25% air pressure in…
I purchase these tires 07/21/2021 (215/ R16) in the amount of $387.14 from Discount tire at 875 S. Randall RD Elgin IL , after I purchase the tires TPMS- indicator dash light kept coming on i was going back to Discount tire almost 3x a week as of today date I'm losing 25% air pressure in all 4 tires Discount tire keep just putting air in and giving me the runaround about these tire's trying to get myself to buy $$$$ more of other things telling me it will help the tire's but before i purchase these tires i had NO problem with my TPMS system I let Discount tires salesperson talk me into buying new tire sensor but it did NO GOOD , it didn't HELP at all !
- Service brakes
ABS Brake Antiblock System
- Unknown or other
While driving my 2007, Toyota Sienna on a sunny afternoon, the spare tire dropped from under the vehicle. Specifically, while I was driving in the parking lot of the local international airport, I drove over a speed bump (about 5 mph) and heard a loud THUMP. When I looked in the rear view mirror…
While driving my 2007, Toyota Sienna on a sunny afternoon, the spare tire dropped from under the vehicle. Specifically, while I was driving in the parking lot of the local international airport, I drove over a speed bump (about 5 mph) and heard a loud THUMP. When I looked in the rear view mirror, I noticed my spare tire on the road. Upon retrieval of the tire I noticed some rusty metal parts, adjacent the tire, that appeared to have been broken loose from under the car. Thankfully I was not on the highway when this happened and that no one was behind me. Someone could have been killed or seriously injured. While completing this document I learned that my vehicle was recalled for the aforementioned.
- Engine
The rubber part of the VVT-I oil line appears to worn and leaking. There is a Toyota Campaign to replace this faulty designed oil line with a full metal line, but for some reason my 2007 Toyota Sienna VIN is not showing up with this campaign. The oil will leak from the engine and cause failure. Please re-check which vehicles are impacted by this Toyota design problem in this VVT-I oil line.
- Structure › Body › Hatchback/liftgate › Hinge and attachments
The contact owns a 2007 Toyota Sienna. The contact stated that the liftgate fell on him as he was loading items into the trunk of the vehicle. The contact moved out of the way as the liftgate proceeded to close independently without warning. The contact was unable to stop the liftgate from…
The contact owns a 2007 Toyota Sienna. The contact stated that the liftgate fell on him as he was loading items into the trunk of the vehicle. The contact moved out of the way as the liftgate proceeded to close independently without warning. The contact was unable to stop the liftgate from independently closing. The dealer was notified of the failure. The manufacturer was not notified of the failure. The vehicle was not repaired. The failure mileage was approximately 114,000.
- Air bags
Last wednesday morning another car rear ended my sienna at high speed at stop sign while I was waiting for my turn to proceed. I was travelling with my family. Sienna got totaled due to this. Side doors, back door, back bumper, cargo and third row seat area all got impacted due to this and…
Last wednesday morning another car rear ended my sienna at high speed at stop sign while I was waiting for my turn to proceed. I was travelling with my family. Sienna got totaled due to this. Side doors, back door, back bumper, cargo and third row seat area all got impacted due to this and everything caved inward by few inches. My entire family has been shaken to the core and me and my wife are sufferings from severe pain in back and neck since the accident. The cabin was filled will white smoke (powdery stuff), but no air bags got deployed (opened) due to the impact. We are lucky that we all are still alive since we had been hit from the back at high speed. The car hitting us from the back must be travelling above 40 miles an hour since my fully loaded sienna with 3 adults and a child skid forward by almost 8-10 feet. This IS a serious concern that even after such a high impact collision, none of the air bag opened. The vehicle was stationary, on a highway at a stop sign (ridge rd and route 52 junction in kendall county, il). I have attached the police report and also the rear of my car. It rendered my car undrivable and I had to get it towed to the garage.
- Electronic stability control (esc)
When driving in perfectly dry conditions and going anywhere from 30-70 mph on a winding road or highway, the vsc lights will come on and the alarm will sound and you can't accelerate. It's very scary and dangerous because you are not in control of the vehicle. It happens every time we go for a…
When driving in perfectly dry conditions and going anywhere from 30-70 mph on a winding road or highway, the vsc lights will come on and the alarm will sound and you can't accelerate. It's very scary and dangerous because you are not in control of the vehicle. It happens every time we go for a drive on a winding road or highway. I have read hundreds of similar complaints from other sienna owners. It's clearly a widespread problem. Toyota needs to issue a recall as all the repair shops we have gone to cannot figure out how to fix the problem.
- Air bags
The airbag light on dash flashes on and off at start of engine and continues while car IS running. After researching this problem I quickly found out this IS a known issue with numerous complaints. I also understand that if airbag light IS flashing that airbags are not going to deploy in event of frontal impact. I feel this IS safty issue and the manufacturer should recall these vehicles.
- Engine · Power train
TL* the contact owns a 2007 toyota sienna. The contact stated while stopped at traffic light, the vehicle stalled with the brake pedal depressed. Several warning lights illuminated on the instrument panel. The contact shifted the vehicle into neutral and coasted into a driveway. Upon inspection…
TL* the contact owns a 2007 toyota sienna. The contact stated while stopped at traffic light, the vehicle stalled with the brake pedal depressed. Several warning lights illuminated on the instrument panel. The contact shifted the vehicle into neutral and coasted into a driveway. Upon inspection, the contact discovered that there was no oil in the engine. The contact refilled the oil however, the oil immediately leaked out the vehicle. A mechanic arrived on scene and replaced an oil hose. After the hose was replaced, the contact heard an abnormal knocking noise in the engine. The contact took the vehicle to several independent mechanics and was informed that the engine failed and needed to be replaced. The contact had the vehicle towed to suburban toyota of farmington hills (25000 haggerty rd, farmington hills, mi 48335) who confirmed there was an engine failure. The contact then had the vehicle towed to an independent mechanic where the engine was replaced. After the engine replacement, the contact experienced several transmission issues. The contact stated that while at a stop, the vehicle independently shifted in and out of gear without warning. Also, while in reverse, the vehicle coasted and jerked upon slight depression of the accelerator pedal. The manufacturer had yet to be notified of the failure. The vehicle had yet to be repaired. The failure mileage was approximately 126,300.*dt*jb
- Electronic stability control (esc)
As I drive on dry roads at speeds between 35 - 65mph, my car indicator lights and alarm sound off about vsc (vehicle stability control) and slippery road lights on my dashboard. My vehicle's steering and braking are affected by it. It starts to rattle the steering wheel and the braking pumps -…
As I drive on dry roads at speeds between 35 - 65mph, my car indicator lights and alarm sound off about vsc (vehicle stability control) and slippery road lights on my dashboard. My vehicle's steering and braking are affected by it. It starts to rattle the steering wheel and the braking pumps - causing a reduction in speed and control for the driver. It caused me to fear a possible vehicular accident so much that I pulled off the road. The problem then disappears and doesn't reappear until I encounter a similar driving condition. I fear that if this occurs on a crowded highway, it will cause me to get into a vehicular accident due to the abrupt loss of control. My minivan was purchased to keep my family 'safer' and this experience IS causing me to fear using this vehicle.after conducting an internet search it appears to be happening to toyota sienna vehicles between model years 2004 - 2008. Mechanics don't seem to understand how to fix other than resetting the sensors; which doesn't fix the problem but just delays its reappearance. In all cases, I experienced this problem only while driving at speeds between 35mph and higher. It's occurred on dry and wet roads, usually while on a curved road.
- Engine · Power train
Driving 55mph on frwy, van started smoking in the rear and oil on back of van. Slowly drove short distance home and lights on dash came on upon arriving home. Oil leaked on street where we parked. Had mobile mechanic look at it. Oil cooler hose had burst. he replaced it, we drove the van 50 miles…
Driving 55mph on frwy, van started smoking in the rear and oil on back of van. Slowly drove short distance home and lights on dash came on upon arriving home. Oil leaked on street where we parked. Had mobile mechanic look at it. Oil cooler hose had burst. he replaced it, we drove the van 50 miles on short trips.when on frwy, it happened again about 3 wks later. Had towed home. Same hose busted again. Looked on internet sites & found same problem has occurred to many people with same van year. Longterm ongoing problem. Called tejas toyota in humble, tx and svc mgr said toyota offered an extended warranty (knew there was a problem), but it ended at 100,000 miles/10yrs (we have 120, 900) and IS 2007 van. we've already had it towed and fixed twice. we're recovering from near death/covid afraid to drive it since we can't trust it. Based on internet stories by others with same problem, & svc mgr at toyota opinion, fear IS warranted. Our van was repaired 2X w/ same type of inferior hose put on van when built by a mechanic not at toyota. None of us realized inferior part was the problem.now we need to repair it again with a "kit" that toyota specifically made because this IS known problem after we spent many 100S of $s repairing it using same type part when built. Wouldn't fix it when I called in 2015. It had to break 1ST per toyota when I checked on it in 2015 when got notice.toyota should repair it at no cost & reimburse me for the expenses I've already had. My husband had covid and almost died and it happened the day after he was released from a month long covid hospital stay and again when I was taking him to therapy for covid 3 wks later. We could have had a accident, been injured, when the van stops with no notice or warning lights.toyota corp. Takes no responsibility.it's our problem,not theirs. Can't drive van. Will happen again w/out warning. Help please!!!
- Fuel/propulsion system · Structure › Body
Dash board cracking.
- Engine
When accelerating the engine makes a tracking noise like bad vavle springs or camps. Only hear the noise when accelerating. Started happening after 60K miles. Common problem with the engine toyota uses with the sienna.
- Structure › Body · Unknown or other
I purchased this toyota brand new in late 2007 and it was delivered in early 2008. It was modified by braunability to be wheelchair accessible. This means the original floor was cut out and a new sub-floor was welded in its place to accommodate the wheelchair. I noticed a lot of premature rust on…
I purchased this toyota brand new in late 2007 and it was delivered in early 2008. It was modified by braunability to be wheelchair accessible. This means the original floor was cut out and a new sub-floor was welded in its place to accommodate the wheelchair. I noticed a lot of premature rust on the exterior modified sub-floor in 2016 I contacted braunability with my concerns only to be dismissed by them because they claimed the van was out of warranty. I was proactive and took the van to a local braunability dealer where the van was originally purchased to sandblast the exterior underside and repair extensive rust damage and undercoated the repairs. This was done at my expense and I paid approximately $7K dollars. well recently I had to make a repair on the interior of the van only to discover the floor in the inside was also rotting away due to rust. This rust IS only occurring on the metal that braunability used in their modifications. I contacted braunability again to raise my concerns only to be dismissed again. They stuck to their out of warranty argument. This van has been maintain in a near new condition and all the original toyota parts are in near new appearance but the rust IS only on braunability metal. I also know of 2 other customers who dealt with similar rust issue and had to total their vans due to damage beyond repair and their vans were still operational aside from rust damage. this rust was caught by me because I am very particular about maintenance of my van and know rust IS cancer to cars. I never expected the rust to be in the interior as well on a 10 year old van with only 105K miles. This would not be an issue if braunability had taken responsibility for the inadequate metal work. I paid 40 thousand dollars for these modification to my 07 toyota sienna. They should not be rotting. This IS a serious safety issue if left unchecked.
- Air bags
My 2007 toyota sienna airbag light has been blinking off and on for about 1 year, because it would do it on an inconsistent basis, I didn't get it checked because it would go off and then come one again. Today at 81,000 miles I took my car to get serviced for an oil change, so I had them diagnose…
My 2007 toyota sienna airbag light has been blinking off and on for about 1 year, because it would do it on an inconsistent basis, I didn't get it checked because it would go off and then come one again. Today at 81,000 miles I took my car to get serviced for an oil change, so I had them diagnose the airbag light and they told me I needed a whole new air bag system that would cost me over $1300.00 and I feel this IS a safety issue and should be the responsibility of the manufacturer. The airbag system IS not something a consumer have access to, to cause wear and tear. I've been driving my children around not realizing the whole system would need to be replaced. Should this be a recall because I am seeing several complaints in this model. And I am unsure how a recall IS established but I feel this needs to be a recall.
- Engine
As I was driving the van, I noticed a smell like burning rubber, although all gauges were normal and no check engine light was on. since I was close to home, I pulled into the garage and noticed smoke coming from under the hood and a trail of oil on the drive way. within a few minutes, there was…
As I was driving the van, I noticed a smell like burning rubber, although all gauges were normal and no check engine light was on. since I was close to home, I pulled into the garage and noticed smoke coming from under the hood and a trail of oil on the drive way. within a few minutes, there was a large puddle of oil under the vehicle as well. I had it towed to the mechanic and was told the oil cooler hose had broken. the mechanic said if I had driven it to the shop, I likely would have ruined the engine because the oil loss was so significant (out of 5 quarts, only .25 was remaining). the mechanic also said that toyota was aware of this issue but did not issue a recall, even though the replacement hoses are now steel and not rubber. this IS a safety issue as the engine could have seized up while running (due to the quick loss of oil) causing potentially serious accident and injury.
- Structure › Body
The automatic closure on the rear sliding door does not close and lock the door in place. The sensor beeps but allows you to drive even though the door IS not shut all the way and latched.
- Electronic stability control (esc)
At random speeds, on curves and straightaways, the traction lights alarms and engages the brakes. This seems really dangerous. Our mechanic doesn't know what IS the cause or how to fix it.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10210375TSB: This Service Bulletin includes procedures to replace damaged or loose front carpet floor retainer(s) without replacing the carpet assembly. Follow the Repair Procedure in this bulletin to replace the loose or damaged carpet floor retainer(s).
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10207937TI: LSC 90K Expired on December 31, 2021
- 10204571TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10203532TT: Some customers may encounter Bluetooth connectivity concerns such as: ?Difficulty to pair the phone. ?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
- 10197492Warranty enhancement program.
- 10197491Warranty enhancement program.
- 10197476Replacement vin plates.
- 10197473Product general information.
- 10197472Technician Certification Requirements.
- 10190460Toyota Safety Recall and Service Campaign - Technician Certification Requirements
- 10190453TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10190449OBSOLETE NOTICE March 08, 2021: This bulletin is now obsolete. Please see T-SB-0044-16.
- 10188913TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2021 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10187241TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
Every Toyota Sienna model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.