2010 Toyota Tundra
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Tundra › 2010
These records cover every 2010 Toyota Tundra. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
16 recalls name the 2010 Toyota Tundra. Newest first.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain JTEKT power steering gear assembly service parts for 2007-2021 Tundra and 2008-2022 Sequoia, part numbers 44250-0C160, 44250-0C131, 44250-0C170, and 11250-0C121. The power steering gear assembly may have been manufactured incorrectly, which can result in an oil leak.
Risk and remedy
Risk
An oil leak may cause a sudden loss of power steering assist, increasing the risk of a crash.
Remedy
Dealers will inspect and replace the power steering gear assembly, free of charge. Owner notification letters were mailed on February 17, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 21TH01.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2008-2022 Sequoia and 2007-2021 Tundra vehicles. The power steering gear assembly may have been manufactured incorrectly, which can result in an oil leak.
Risk and remedy
Risk
An oil leak may cause a sudden loss of power steering assist, increasing the risk of a crash.
Remedy
Dealers will inspect and replace the power steering gear assembly as necessary, free of charge. Owner notification letters were mailed on January 21, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are 21TB10 and 21TA10.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010…
Risk and remedy
Risk
If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
Remedy
SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
Toyota Motor Company (Toyota) is recalling certain model year 2009-2011 Tundra, Sequoia, Corolla, Corolla Matrix and Scion xB, 2008-2011 Highlander and Highlander Hybrid, 2007 Camry and Camry Hybrid, 2009 Camry and Camry Hybrid, 2006-2011 RAV4, 2006-2010 Yaris, and 2009-2010 Scion xD and Pontiac Vibe vehicles. During the manufacturing of the Power Window…
Risk and remedy
Risk
If the sliding electrical contacts are not protected by lubricant, debris and moisture that get into the switch may cause a short circuit and the switch assembly may overheat and melt, increasing the risk of a fire.
Remedy
Toyota will notify owners, and dealers will inspect the switch, applying a lubricant if no abnormality is found. If abnormality is found, the PWMS circuit board will be replaced, free of charge. The recall is expected to begin December 20, 2015. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is C0M.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion…
Risk and remedy
Risk
Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
Remedy
SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.
Southeast Toyota is recalling certain model year 2008 and 2010-2013 Toyota Tundra, 2010-2012 Rav4, 2012 Toyota Sequoia, 2010-2011 Toyota Corolla, 2010-2011 Toyota Camry and Camry Hybrid, 2010-2013 Toyota Highlander and Highlander Hybrid, 2010-2013 Toyota FJ Cruiser, 2011 Toyota Land Cruiser, 2010-2013 Toyota Venza, 2010-2011 Toyota 4Runner, 2010-2013 Toyota…
Risk and remedy
Risk
An inaccurate label could lead to owners overloading their vehicles and tires. An overloaded vehicle can result in a tire failure which may result in a vehicle crash, personal injury, or property damage.
Remedy
Southeast Toyota will notify owners and provide a corrected label with instructions concerning its installation. A small group of the affected vehicles will need additonal remedies which are still being developed. The recall began on May 28, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013…
Risk and remedy
Risk
If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. This could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.
Remedy
Southeast Toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on March 21, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Southeast toyota IS recalling certain model year 2007-2011 tundra vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 138, "tire pressure monitoring systems." the TPMS on some vehicles may not have been properly calibrated and as a result the low tire pressure warning lamp may not illuminate should the…
Risk and remedy
Risk
Drivers will not receive a warning from the tire pressure monitor that one or more tires are underinflated, increasing the risk that the vehicle will be driven with one or more underinflated tires, increasing the risk of a tire failure that may lead to a crash.
Remedy
Dealers will recalibrate the tire pressure monitoring system in accordance with the regulation free of charge. the safety recall began during july 2011. owners may contact southeast toyota customer assistance center toll free at 1-800-301-6859, monday through friday, 8:30 am to 5:00 pm, eastern standard time.
Gulf states toyota IS recalling certain model year 2011 FJ cruiser and model year 2009-2011 tundra vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 138, "tire pressure monitoring systems." the TPMS on some vehicles may not have been properly calibrated and as a result the low tire pressure warning lamp may…
Risk and remedy
Risk
Drivers will not receive a warning from the tire pressuring monitor that one or more tires are underinflated increasing the risk that a vehicle will be driven with one or more underinflated tires and increasing the risk of a tire failure that may lead to a crash.
Remedy
Dealers will recalibrate the tire pressure monitoring system in accordance with the regulation free of charge. the safety recall IS expected to begin during june 2011. owners may contact gulf state toyota customer assistance center toll free at 1-800-444-1074 monday through thursday, 8:30 am to 5:00 pm, or friday 8:30 am to 4:00 pm central standard time.
Toyota IS recalling certain model year 2008 through 2011 FJ cruiser, land cruiser, tacoma, sequoia and tundra vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 138, "tire pressure monitoring system (TPMS)." when factory-installed wheels and tires were replaced with toyota authorized accessory wheels and LT…
Risk and remedy
Risk
Failure to warn of tire deflations IS a non-compliance with fmvss 138 and could lead to tire failure increasing the risk of a crash.
Remedy
For the land cruiser, sequoia, tacoma and tundra vehicles, the dealer will re-calibrate the tire pressure monitoring system on affected vehicles and install an updated tire and loading information label at no charge. for the FJ cruiser vehicles, the TPMS cannot be reset so the electronic control unit (ecu) for the TPMS will be replaced. toyota IS currently developing the remedy ecu. if an owner IS not certain whether his or her vehicle IS equipped with these accessories, please contact any toyota dealer for an inspection at no charge. the safety recall began on march 31, 2011. owners may contact toyota at 1-800-331-4331.
Toyota IS recalling certain model year 2010 tundra vehicles with four wheel drive, there IS a possibility that an improper weld exists at the union of the propeller shaft and yoke. due to this improper weld, this joint may separate and the separated shaft may come into contact with the road surface.
Risk and remedy
Risk
This may result in a loss of vehicle control increasing the risk of a crash.
Remedy
Dealers will replace the front propeller shaft free or charge. the safety recall began on march 19, 2010. owners may contact toyota at 1-800-331-4331.
Gulf states toyota IS recalling certain model year 2005-2010 vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold between september 1, 2005 and june 2, 2008 without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
This does not meet the standard requirements.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. Dealers will also correct the owner's manual. the safety recall began on may 27, 2010. owners may contact gulf states toyota at 713-580-3300.
Southeast toyota IS recalling certain model year 2005-2011 passenger vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
A driver may overload a vehicle which may increase the risk of a crash.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. the safety recall began on may 27, 2010. owners may contact southeast toyota at 1-800-301-6859.
Toyota IS recalling certain model year 2005-2010 avalon, model year 2007-2010 camry, model year 2009-2010 corolla, corolla matrix, RAV4, model year 2010 highlander, model year 2008-2010 sequoia, and model year 2007-2010 tundra vehicles. due to the manner in which the friction lever interacts with the sliding surface of the accelerator pedal inside the…
Risk and remedy
Risk
The accelerator pedal may become hard to depress, slow to return to idle, or, in the worst case, mechanically stuck in a partially depressed position, increasing the risk of a crash.
Remedy
Dealers will install a reinforcement bar in the accelerator pedal which will allow the pedal to operate smoothly. gm will notify owners for the pontiac vibe please see 10v-018. this service will be performed free of charge. the safety recall IS expected to begin on february 5, 2010 and will be completed on march 15, 2010. owners may contact toyota at 1-800-331-4331.
Toyota IS recalling certain model year 2004-2010 passenger vehicles. the accelerator pedal can get stuck in the wide open position due to its being trapped by an unsecured or incompatible driver's floor mat.
Risk and remedy
Risk
A stuck open accelerator pedal may result in very high vehicle speeds and make it difficult to stop the vehicle, which could cause a crash, serious injury or death.
Remedy
Toyota filed an amended defect report on november 25, 2009, stating that dealers will modify the accelerator pedal and, on certain vehicles, alter the shape of the floor surface under the pedal. these changes address the risk of pedal entrapment due to interference with the floor mat. redesigned accelerator pedals will become available beginning in april 2010 and dealers will replace any modified pedal with the new pedal if desired. also, dealers will replace any genuine toyota or lexus all-weather floor mats with redesigned all-weather mats, or repurchase the previous mats from owners who do not want the new ones. additionally, software modifications will be installed on camry, avalon and lexus ES 350, IS 350 and IS 250 models that will ensure that the brake overrides the accelerator in the event both brake and accelerator pedals are applied. toyota will begin mailing letters to owners on december 31, 2009. owners may contact toyota at 1-800-331-4331, lexus at 1-800-255-3987.
Toyota IS recalling 27,080 model year 2005 through 2010 passenger cars built from september 1, 2005 to may 4, 2009. these vehicles were not equipped with load carrying capacity modification labels which fails to conform with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims."
Risk and remedy
Risk
Incorrect load carrying capacity modification labels could result in the vehicle being overloaded, increasing the risk of a crash.
Remedy
Toyota will notify owners and provide them with a new, accurate label to be installed over the inaccurate label free of charge. the safety recall began on august 18, 2009. owners may contact toyota at 1-888-270-9371.
Owner complaints
163 complaints13 involved a crash7 injuries
What owners report most
Latest complaints
- Structure › Body · Suspension
My understanding is that my vehicle went in for the frame issue. However on both the driver and passenger sides the frame is literally disintegrating. The metal is falling apart in solid chunks, not flakes actual chunks ⅜" x 2" x 3"! This is taking place in the exact same locations on each side. Just aft of the front suspension cross frame and in front of the transmission/transfer case cross support.
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2010 Toyota Tundra. The contact stated that while attempting to register the vehicle, it was discovered that there was a mileage discrepancy. The vehicle was a private sale. At the time of purchase, the vehicle mileage was 100,000 and at the time of registration, it was discovered that the mileage was 250,000.
- Unknown or other
I am writing to formally bring to your attention a troubling situation I have encountered regarding the purchase of a vehicle that I believe constitutes fraud. On [XXX], I, [XXX] , purchased a 2010 Toyota Tundra from Beaverton Car Company in Beaverton, Oregon. I agreed to a high-interest loan…
I am writing to formally bring to your attention a troubling situation I have encountered regarding the purchase of a vehicle that I believe constitutes fraud. On [XXX], I, [XXX] , purchased a 2010 Toyota Tundra from Beaverton Car Company in Beaverton, Oregon. I agreed to a high-interest loan, expecting to refinance the vehicle shortly thereafter. However, upon attempting to trade the vehicle on September 13, 2024, I learned that the outstanding loan balance exceeded the truck's value due to an illegal odometer rollback. The dealer informed me that the odometer had been rolled back prior to the auction from which they acquired the vehicle; at the time of sale, it displayed 81,000 miles but had actually accrued 268,000 miles. Despite signing the CARFAX indicating a “potential odometer rollback,” I was misled regarding the vehicle’s actual mileage. This significant discrepancy has caused financial distress and I believe it breaches legal statutes regarding odometer accuracy. Given the dealership’s dishonesty and the impact on my financing arrangements, I am seeking a full refund for the vehicle. I appreciate your attention to this matter and look forward to your guidance on how to proceed. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Suspension
Took my 2010 Tundra in for service at a local repair shop and was told that my frame has severe rust on the frame and is in poor condition. I am worried about the safety of this vehicle for me and my family. I am the only owner of the truck and purchased it brand new. What can be done? Thank you
- Structure › Body
Rusting frame on the vehicle leading to potential cracks and creating safety concerns. Truck has low miles and been well maintained.This is my second Toyota truck with a rusted frame. No help or support from Toyota on my concerns with the 2010 Tundra.
- Fuel/propulsion system
Gas Pump: Over the last few months, the vehicle has stalled twice, with the engine not functioning. Upon turning the ignition switch, the starter engages and the engine cranks, but it does not sustain operation. In both cases, the vehicle was able to start and run only after numerous attempts, exceeding 10 to 15, while consistently pressing the gas pedal.
- Structure › Frame and members
The contact owns a 2010 Toyota Tundra. The contact stated while the vehicle was in for inspection, the mechanic discovered corrosion present on the subframe of the vehicle. The contact stated that along with corrosion, the subframe was cracked and had several holes. The cause of the damage was not…
The contact owns a 2010 Toyota Tundra. The contact stated while the vehicle was in for inspection, the mechanic discovered corrosion present on the subframe of the vehicle. The contact stated that along with corrosion, the subframe was cracked and had several holes. The cause of the damage was not yet determined. The manufacturer and local dealer were notified of the failures, but no assistance was provided. The contact was informed that the vehicle was not eligible for the manufacturer's Extended Warranty coverage for the failure. The failure mileage was 82,000.
- Structure › Body
My 2010 Toyota Tundra is like new and only has 56,000 miles on it. I ordered new tires and when I brought it to have the tires installed I was told me the frame was rusted through and they couldn’t lift it off the ground. They were concerned with me driving it and suggested that I bring it to my…
My 2010 Toyota Tundra is like new and only has 56,000 miles on it. I ordered new tires and when I brought it to have the tires installed I was told me the frame was rusted through and they couldn’t lift it off the ground. They were concerned with me driving it and suggested that I bring it to my Toyota dealership and see what they could do. The dealership said there was nothing they could do because there was no recall on my vehicle. I asked if they could look at it to see it was safe to drive, and was told there would be a $167 to just look a my vehicle. I called Toyota Customer Service (800-331-4331) to complain and opened case# 23122000824. I called a frame shop to make an appointment to have it looked at and was told that they get lots of Tundra’s in with rotted frames. Apparently Toyota is ignoring this problem. They had an issue with rusted frames on the Toyota Tacoma and they issued a recall.
- Fuel system, gasoline › Storage · Structure
The contact owns a 2010 Toyota Tundra. The contact stated while driving at an undisclosed speed, the contact stated that when she arrived at her destination her husband noticed something hanging from underneath the vehicle. The vehicle was taken to the dealer. The vehicle was diagnosed with a…
The contact owns a 2010 Toyota Tundra. The contact stated while driving at an undisclosed speed, the contact stated that when she arrived at her destination her husband noticed something hanging from underneath the vehicle. The vehicle was taken to the dealer. The vehicle was diagnosed with a rusted rear fuel tank strap. The contact was informed that the fuel tank strap needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure but provided no assistance. The failure mileage was approximately 187,000.
- Structure › Body
Rusted frame failed PA state inspection. This has been a well maintained vehicle and should not be experiencing that much corrosion.
- Forward collision avoidance › Warnings
I can’t drive to back only to the from. When I did to back I listen is stocked.
- Engine
I received a check engine light for the secondary injection system. Toyota extended the warranty but wont honor issues after 10 years, even though the truck has less than 100K miles. This is a safety issue as the trucks performance is altered and concerned about passing a car on a two lane highway. The repair can range from $2K to $4K pending on the dealer.
- Air bags
The contact owns a 2010 Toyota Tundra. The contact stated while driving at 30 MPH, the contact suffered a blackout and struck the side rail causing major damage to the front end of the vehicle. The air bags did not deploy. A police report was filed. The contact had several injuries. The contact was…
The contact owns a 2010 Toyota Tundra. The contact stated while driving at 30 MPH, the contact suffered a blackout and struck the side rail causing major damage to the front end of the vehicle. The air bags did not deploy. A police report was filed. The contact had several injuries. The contact was able to drive the vehicle home. The dealer was not contacted. The manufacturer was not contacted. The failure mileage was 800. The VIN was not available.
- Structure › Body · Unknown or other
Premature corrosion of frame. I had the truck into the shop for an unrelated issue when the service tech discovered holes in the vehicle frame. The technician was uncomfortable working on the vehicle on the lift because it is a safety hazard. Toyota claims my vehicle was not included in any of the…
Premature corrosion of frame. I had the truck into the shop for an unrelated issue when the service tech discovered holes in the vehicle frame. The technician was uncomfortable working on the vehicle on the lift because it is a safety hazard. Toyota claims my vehicle was not included in any of the previous frame recalls or service programs, and while bad steel is a known issue with Toyota, they are unwilling to replace the frame on my truck because all previous recalls were VIN specific. My vehicle has no surface rust, but has enough frame corrosion to deter trained service technicians from working on it. If the frame is unsafe to be working on, it is unsafe to put my family in, and Toyota is permitting the sale and use of unsafe vehicles.
- Structure › Frame and members
The contact owns a 2010 Toyota Tundra. The contact stated that while the vehicle was at an independent mechanic for an inspection, the mechanic informed her that the subframe was severely corroded and unable to haul the weight of a camper. The vehicle was not repaired. The manufacturer was made…
The contact owns a 2010 Toyota Tundra. The contact stated that while the vehicle was at an independent mechanic for an inspection, the mechanic informed her that the subframe was severely corroded and unable to haul the weight of a camper. The vehicle was not repaired. The manufacturer was made aware of the failure and advised the contact to file a complaint with the NHTSA Hotline. The failure mileage was approximately 74,300.
- Fuel/propulsion system
While driving my Tundra, I heard a bumping and scraping sound beneath the truck. Upon further examination, the front Fuel Tank strap had corroded and broken into 2 pieces leaving only the rear fuel tank strap to retain the fuel tank.
- Suspension › Rear › Springs › Leaf spring assembly
The contact owns a 2010 Toyota Tundra. The contact stated that while driving at an undisclosed speed, the vehicle made an abnormal sound. Upon inspection, the contact noticed that the rear leaf springs had separated. The vehicle was taken to an independent mechanic who diagnosed that the rear leaf…
The contact owns a 2010 Toyota Tundra. The contact stated that while driving at an undisclosed speed, the vehicle made an abnormal sound. Upon inspection, the contact noticed that the rear leaf springs had separated. The vehicle was taken to an independent mechanic who diagnosed that the rear leaf springs needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 150,000.
- Steering
The contact owns a 2010 Toyota Tundra. The contact received notification of NHTSA Campaign Number: 21E103000 (Steering). The contact stated that while driving at an undisclosed speed, the steering wheel made popping and grinding sounds while making turns. The dealer was made aware of the failure…
The contact owns a 2010 Toyota Tundra. The contact received notification of NHTSA Campaign Number: 21E103000 (Steering). The contact stated that while driving at an undisclosed speed, the steering wheel made popping and grinding sounds while making turns. The dealer was made aware of the failure but informed the contact that he needed to pay out-of-pocket for the diagnostic testing. The vehicle was not diagnosed nor repaired by an independent mechanic or dealer. The manufacturer was made aware of the failure but informed the contact that the recall repair would only be performed if the vehicle had had the power steering gear assembly replaced since August 2021, which the vehicle had not. The failure mileage was approximately 147,000.
- Seat belts
The contact owns a 2010 Toyota Tundra. The contact stated that the rear seat belt was inoperable. The contact stated that the clasp failed to close. There were no warning lights illuminated. The vehicle was taken to the local dealer where it was diagnosed that the pin was open and causing the latch…
The contact owns a 2010 Toyota Tundra. The contact stated that the rear seat belt was inoperable. The contact stated that the clasp failed to close. There were no warning lights illuminated. The vehicle was taken to the local dealer where it was diagnosed that the pin was open and causing the latch to fail to close securely. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 175,361.
- Engine and engine cooling › Exhaust system › Emission control › Crankcase (pcv)
The contact owns a 2010 Toyota Tundra. The contact stated that the driver's side Positive Crankcase Ventilation (PCV) valve had been replaced twice. The contact stated that while driving at 65 MPH, the vehicle lost motive power. The vehicle was taken to an independent mechanic who diagnosed that…
The contact owns a 2010 Toyota Tundra. The contact stated that the driver's side Positive Crankcase Ventilation (PCV) valve had been replaced twice. The contact stated that while driving at 65 MPH, the vehicle lost motive power. The vehicle was taken to an independent mechanic who diagnosed that the passenger's side PCV valve was faulty. The mechanic replaced the passenger's side PCV valve. The manufacturer was made aware of the failure but informed the contact that there was no recall associated with the VIN. The failure mileage was 61,606.
- Structure › Body
The chassis on my 2010 Tundra is badly rusted. The rust is also evident in the bed of the truck. I was informed of the rust during my quarterly servicing of the vehicle. I was recently informed the rust has gotten really bad.
- Structure › Body
The frame of my truck has developed an unsafe amount of rust.
- Suspension
Upon inspection of the underside I my tundra I noticed the rear bumper nearly rusted away. Further inspection showed major rusting of the tow tongue tunnel, rear shock supports and spots on the frame.
- Structure › Body
Frame IS rusting. Rear bumper has holes through it. Truck only has 50,000 miles on it.
- Unknown or other
Door actuators are defective. Manufacturer used defective internal plastic part, resulting in doors not locking, not unlocking, and not functioning. Children cannot exit back door without manually unlocking the door
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10235241TT: Some 2007 ? 2012 model year Tundra vehicles may exhibit a rubbing or grinding noise from the rear when making left-hand or right-hand turns. New parking brake plate sub-assemblies have been developed to address this condition.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10224588TSB: Some 2007 ? 2010 model year Tundra vehicles may exhibit a howling or growling noise from the rear of the vehicle that increases with vehicle speed. Changes have been made to the rear axle bearing to address this condition. Follow the Repair Procedure in this bulletin to address this condition.
- 10224108TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10220183TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10210376OBSOLETE NOTICE Month 09, 2022: This bulletin is now obsolete. Please see T-SB-0014-22.
- 10210375TSB: This Service Bulletin includes procedures to replace damaged or loose front carpet floor retainer(s) without replacing the carpet assembly. Follow the Repair Procedure in this bulletin to replace the loose or damaged carpet floor retainer(s).
- 10208995TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10204571TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10203532TT: Some customers may encounter Bluetooth connectivity concerns such as: ?Difficulty to pair the phone. ?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
- 10197476Replacement vin plates.
- 10197473Product general information.
- 10190460Toyota Safety Recall and Service Campaign - Technician Certification Requirements
Every Toyota Tundra model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.