2017 Toyota Tundra
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Tundra › 2017
These records cover every 2017 Toyota Tundra. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
6 recalls name the 2017 Toyota Tundra. Newest first.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain JTEKT power steering gear assembly service parts for 2007-2021 Tundra and 2008-2022 Sequoia, part numbers 44250-0C160, 44250-0C131, 44250-0C170, and 11250-0C121. The power steering gear assembly may have been manufactured incorrectly, which can result in an oil leak.
Risk and remedy
Risk
An oil leak may cause a sudden loss of power steering assist, increasing the risk of a crash.
Remedy
Dealers will inspect and replace the power steering gear assembly, free of charge. Owner notification letters were mailed on February 17, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 21TH01.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2008-2022 Sequoia and 2007-2021 Tundra vehicles. The power steering gear assembly may have been manufactured incorrectly, which can result in an oil leak.
Risk and remedy
Risk
An oil leak may cause a sudden loss of power steering assist, increasing the risk of a crash.
Remedy
Dealers will inspect and replace the power steering gear assembly as necessary, free of charge. Owner notification letters were mailed on January 21, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are 21TB10 and 21TA10.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2017 Toyota Tundra vehicles. One of the rear split bench seat leg brackets may not have been properly tightened to the vehicle's floor pan, possibly allowing the seat to move in a crash. A vehicle with an improperly tightened seat leg bracket could fail to comply with the requirements…
Risk and remedy
Risk
If the rear split bench seat moves in a crash, the seat occupant has an increased risk of injury.
Remedy
Toyota will notify owners, and dealers will tighten the five seat leg bracket bolts, as necessary, free of charge. The recall is expected to begin March 2018. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's number for this recall is J0I.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2017-2018 Toyota 4Runner and Tundra, 2018 Toyota Highlander, RAV4 and Lexus GX460 and 2017 Toyota Sienna and Tacoma vehicles. These vehicles may have incorrect load carrying capacity modification labels. As such, these vehicles fail to comply with the requirements of Federal Motor…
Risk and remedy
Risk
An incorrect load information label can result in the operator overloading the vehicle and increasing the risk of a crash.
Remedy
Toyota will notify owners and provide them with corrected labels, free of charge. The recall began on January 23, 2018. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are H0Z for Toyota vehicles, and HLF for Lexus vehicles.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2013-2017 Toyota Tundra and Sequoia vehicles accessorized with Southeast Toyota accessory 20-inch Rockstar wheels installed by Southeast Toyota or a Southeast Toyota dealer. The Rockstar wheels were installed with lugnuts that may crack and detach.
Risk and remedy
Risk
Lugnuts that crack and detach may cause the wheels to separate from the vehicle, increasing the risk of a crash.
Remedy
SET will notify owners, and dealers will install new replacement lugnuts, free of charge. The recall began June 23, 2017. Owners may contact SET customer service at 1-866-405-4226. SET's number for this recall is SET17A.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2016-2017 Tundra vehicles equipped with a resin rear step bumper and resin reinforcement brackets (vehicles with chrome step bumpers are not affected). In the event of an impact to the corner of the bumper, the resin bracket may be damaged but not be noticed.
Risk and remedy
Risk
If a person steps on the corner of the bumper that is damaged, a portion of the bumper may break away, increasing the risk of injury.
Remedy
Toyota will notify owners, and dealers will replace the resin rear bumper reinforcement brackets with steel ones, and replace the rear bumper tread, free of charge. The recall began on May 21, 2017. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is H0C.
Owner complaints
78 complaints2 involved a crash1 injuries
What owners report most
Latest complaints
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2017 Toyota Tundra. The contact discovered that there was a mileage discrepancy after the purchase. The vehicle was a private sale. At the time of the purchase, the vehicle mileage was 95,000. It was later discovered upon checking the Carfax report the mileage was 200,000.
- Structure › Body › Bumpers › Active shutters/grill · Structure › Body › Hood
Front grille piece on hood keeps coming off even after being replaced 4 times now and this last time it flew off busted my windshield on the expressway and Toyota just tells me to go to collision center as a solution! This piece just snaps in as it's just plastic and it just flys off the front when…
Front grille piece on hood keeps coming off even after being replaced 4 times now and this last time it flew off busted my windshield on the expressway and Toyota just tells me to go to collision center as a solution! This piece just snaps in as it's just plastic and it just flys off the front when it catches air under it, it busted my windshield, messed me hood up and flew down the side of my truck on the expressway and could have caused a major accident this time! Toyota refuses to do anything about it and there are other trucks that have the issues! When I did my research! This accident scared me this time the other times I was able to catch it before it flew off? Not this time there was no warning it just flew off and busted my windshield and it could have been so much worse and they aren't offering a better solution or issuing a recall after I am telling them about this issue!
- Fuel/propulsion system
Began experiencing long cranking, difficulty starting, then rough idling. Started researching online and found recalls for 2018 -2019 Flex fuel 5.7 Tundras. My 2017 is also a Flex fuel 5.7 with exactly the same issue. Dealer says 2017 not covered. I had to pay over $2000 to have the fuel pump…
Began experiencing long cranking, difficulty starting, then rough idling. Started researching online and found recalls for 2018 -2019 Flex fuel 5.7 Tundras. My 2017 is also a Flex fuel 5.7 with exactly the same issue. Dealer says 2017 not covered. I had to pay over $2000 to have the fuel pump replaced, ECM reprogrammed. I don’t understand why 2017 was not included in the recall. Please NHTSA consider extending this recall to 2017. I am reading numerous complaints on this website about the same issue from owners of 2017 Flex fuel Tundras.
- Service brakes
The factory IBC is a safety issue. I would not tow anything over 1500lbs as the brake controller does not work. This controller is an accident waiting to happen. When set on gain 10 you can barely feel a tug from the trailer. You can't feel anything if you apply the vehicle brake pedal. On a gain…
The factory IBC is a safety issue. I would not tow anything over 1500lbs as the brake controller does not work. This controller is an accident waiting to happen. When set on gain 10 you can barely feel a tug from the trailer. You can't feel anything if you apply the vehicle brake pedal. On a gain of 10 it should lock up the trailer brakes, and it can't do that on a dirt road much less on asphalt. Toyota has not done anything to fix this issue AT ALL! Lots of truck owners out there that don't even know of this problem and alot of owners are forced to install aftermarket brake controllers on their dimensions. Toyota should be held to fixing this safety issue. Why isn't there a recall on these vehicles. It's a problem that multiple year tundras! I purchased this vehicle to tow a 16' travel trailer weighin3500 lbs. I tried to adjust the controller in the neighborhood and was not happy or safe with the test. I will not tow with the factory setup. UNSAFE!
- Power train · Vehicle speed control
The transmission solenoid D shows high voltage which sets my check engine light off. At first no difference would be noticed and it would randomly turn off and then back on randomly. After doing this on and off for the last few months, the transmission has randomly been getting stuck in 4th gear…
The transmission solenoid D shows high voltage which sets my check engine light off. At first no difference would be noticed and it would randomly turn off and then back on randomly. After doing this on and off for the last few months, the transmission has randomly been getting stuck in 4th gear but will lower when slowing down. According to those who have had the same issue have found it to be fixed by replacing the S4 solenoid which seems to be producing way more voltage than it’s supposed to
- Fuel/propulsion system
Cold starting problems so the dealer diagnosed as a defective fuel pump.
- Steering · Suspension
Power steering rack and pinion failure on 2017 Toyota Tundra Limited. Leak and Popping clunk noise when turning steering wheel . Potential for steering loss and accident.
- Equipment › Mechanical › Accessory scissor/screw/bottle jack/lift · Tires › Pressure monitoring and regulating systems
The contact owns a 2017 Toyota Tundra. The contact stated while driving 65-70 MPH, the TPMS warning light illuminated. The contact pulled over and became aware that the passenger's side rear tire was losing air. The contact attempted to use the OEM jack; however, the jack was too small. The contact…
The contact owns a 2017 Toyota Tundra. The contact stated while driving 65-70 MPH, the TPMS warning light illuminated. The contact pulled over and became aware that the passenger's side rear tire was losing air. The contact attempted to use the OEM jack; however, the jack was too small. The contact used several rocks to add height to raise the vehicle up with the OEM jack. The flat tire was replaced with the spare. The contact was concerned about the vehicle falling off the jack. The vehicle was taken to the local dealer, and the tire was patched. The vehicle was repaired. The dealer declined to replace the jack. The manufacturer was contacted and opened a case. The failure mileage was approximately 87,500.
- Fuel/propulsion system
My 2017 Toyota Tundra had been starting roughly the past couple of weeks, I initially thought this was due to the very cold weather we recently had. It has just over 71k miles on it, so there should be no issues with this truck. Then on the afternoon of 1/16/25 I tried to start my truck and it…
My 2017 Toyota Tundra had been starting roughly the past couple of weeks, I initially thought this was due to the very cold weather we recently had. It has just over 71k miles on it, so there should be no issues with this truck. Then on the afternoon of 1/16/25 I tried to start my truck and it would turn over, but not start. No fuel was getting to the engine. I did some research on this issue and it seems a recall was issued for 1.5 MILLION Tundras from 2017. I did a search for my VIN and nothing comes up. I want this fixed by Toyota as it should be included in the recall. Now I have a useless hunk of metal sitting at my house because I cant even start it to get it TO the dealership. Please help me resolve this and have Toyota take care of the problem. I dont understand why my vehicle was not included in the 1.5 million vehicles initially covered. Please, help consumers out with this. Please advise. Thank you in advance.
- Electrical system · Exterior lighting
Headlights go out randomly usually when using turn signal. Because this happens at night all visibility is lost temporarily. This also confuses other drivers. I haven’t taken the vehicle to the dealer because the symptom is very sporadic and difficult to duplicate. Dealerships will not fix…
Headlights go out randomly usually when using turn signal. Because this happens at night all visibility is lost temporarily. This also confuses other drivers. I haven’t taken the vehicle to the dealer because the symptom is very sporadic and difficult to duplicate. Dealerships will not fix anything unless they can witness the issue. No warning lights or messages were displayed. This problem has been documented numerous times by many different owners on Toyota Tundra forums.
- Power train
Diagnostic report indicates problem with shift solenoid and it’s replaceable. Dealership instead charge me for full transmission replacement.
- Fuel/propulsion system
Flex Fuel Extended Crank when engine is cold. Have had into dealer multiple times and fix is temporary. Known issue with flex fuel Tundras that keeps returning
- Engine
My 2017 Toyota Tundra Limited has 107,192 miles. I took the vehicle to Berlin City Toyota in Portland, ME for an oil change. The service technician told me that the truck has a cam tower leak. The engine is leaking oil directly onto the exhaust manifold. The service technician told me that if the…
My 2017 Toyota Tundra Limited has 107,192 miles. I took the vehicle to Berlin City Toyota in Portland, ME for an oil change. The service technician told me that the truck has a cam tower leak. The engine is leaking oil directly onto the exhaust manifold. The service technician told me that if the leak gets worse the engine oil could combust and the engine would light on fire. I regularly have my truck serviced at Berlin City Toyota in Portland, ME, which is where I purchased the truck. I have documented with Toyota that the truck has been burning or leaking oil since it purchased the truck when it had 43,000 miles. No leak was ever found by Toyota until yesterday. The cost to repair this issue is $5600. No warning lamps or messages have ever appeared on the truck. Toyota says this is a common issues with the 5.7 liter V8 engine in the 2017 Tundra. I feel that it should be covered by warranty or a recall should be put in place for the cam tower leak on the Toyota Tundra being that the engine could light on fire with no warning due to the faulty seal on the engine.
- Fuel system, gasoline
The contact owns a 2017 Toyota Tundra. The contact stated that after attempting to start the vehicle, the engine failed to turn over. The contact stated that after several attempts, the vehicle started. The vehicle was taken to the dealer where it was diagnosed and determined that the fuel pump and…
The contact owns a 2017 Toyota Tundra. The contact stated that after attempting to start the vehicle, the engine failed to turn over. The contact stated that after several attempts, the vehicle started. The vehicle was taken to the dealer where it was diagnosed and determined that the fuel pump and the CPU had failed, and the fuel pump needed to be replaced, and the CPU needed to be reprogrammed. The vehicle was repaired; however, the failure recurred. The contact stated that while driving at an undisclosed speed, the vehicle stalled. The contact was able to restart the vehicle. The check engine warning light illuminated. The contact stated that he used a code reader to diagnose the vehicle and the result showed that an ethanol fuel type had been detected instead of regular fuel to refuel the vehicle. The contact stated that the system was confused, and that ethanol was not the fuel type that was used. The dealer was not notified of the failure. The manufacturer was notified of the failure and the contact was informed that the VIN was not included in a recall. The failure mileage was approximately 78,000. The VIN was unavailable.
- Air bags
The contact owns a 2017 Toyota Tundra. The contact stated that while starting the vehicle, while the vehicle was idling in park, the driver’s and passenger’s side curtain air bags deployed. The contact took the vehicle to the dealer who was unable to find the cause of the failure. The vehicle had…
The contact owns a 2017 Toyota Tundra. The contact stated that while starting the vehicle, while the vehicle was idling in park, the driver’s and passenger’s side curtain air bags deployed. The contact took the vehicle to the dealer who was unable to find the cause of the failure. The vehicle had not been repaired. The manufacturer was made aware of the failure and opened a case regarding the failure. The approximate failure mileage was 90,000.
- Unknown or other
The horn stopped working. I noticed this in an emergency situation. The horn which is a safety feature should not fail especially for a relatively newer vehicle with less than seventy thousand miles.
- Fuel/propulsion system
Our 2017 Toyota Tundra has been having difficulty starting, takes multiple attempts before starting. We brought it to Toyota dealership and had a diagnostic done. They told us we need new fuel pump and the ECM software needs to be updated. There is a know problem with Denso fuel pump system…
Our 2017 Toyota Tundra has been having difficulty starting, takes multiple attempts before starting. We brought it to Toyota dealership and had a diagnostic done. They told us we need new fuel pump and the ECM software needs to be updated. There is a know problem with Denso fuel pump system along with class action lawsuit. We were told that our vehicle is not included in that lawsuit. We were also told by Toyota dealership that the fuel pump is on back order and they are not sure when it will arrive. They said it could take months. With this fuel pump issue our safety is at risk because our vehicle could lose power at any time. There were no warning lights to alert us to this issue.
- Air bags
My airbag sensor is active. My vehicle only has 94000 miles on it. Power training warranty does not cover this failure. This happened when my car was parked and I turned on the engine and the sensor remains active.
- Electrical system · Service brakes
Intermittent failure of the integrated trailer brake controller system. System indicates a frequent intermittent fault indicating a wiring or connection issue that disables the signal to activate the trailer brakes resulting in no trailer braking. Vehicle and trailer are available for inspection.…
Intermittent failure of the integrated trailer brake controller system. System indicates a frequent intermittent fault indicating a wiring or connection issue that disables the signal to activate the trailer brakes resulting in no trailer braking. Vehicle and trailer are available for inspection. I was travelling down a 6% grade mountain (Arizona SR87 MP224) an exhibited a loss of trailer brakes. Taking the trailer to the dealer on flat level service experienced intermittent loss of trailer brakes. Toyota Integrated Brake Controller (IBC) intermittently and randomly indicating a fault in the trailer wiring. •Rapid clicking of the IBC’s electrical relays. •In fault mode, the IBC disables the trailer brakes. •Sometimes the IBC works perfectly for miles and then goes into fault mode for an unknown reason. •Sometimes, the IBC goes into fault mode just plugging the trailer into the electrical socket without even taking the truck out of drive or depressing the brake pedal. •All external trailer lights include turn signals are functioning normally. Examination and diagnosis to date: •Toyota IBC was removed and replaced with a Tekonsha P3 brake controller using a Tekonsha wiring harness adapter to plug directly into the Tundra’s wiring harness used by the original Toyota IBC. The P3 is giving the error as brake circuit short-circuit, overload. •The travel trailer is a 2022 Jayco 212QBW, dual axle. •I brought the trailer to the dealer I purchased it from to have the brake system checked for faults. I’ve attached a copy of receipt from the dealer service department. In short, they examined the following and concluded the issue was with the Tundra. - The trailer wiring was physically examined with no deficiencies. - Trailer connected to the dealer's Chevy Silverado and driven around town with no faults. Toyota dealership claims they can find no fault with their tester. They would not use my 7-pin tester that also exhibits the same problems.
- Electrical system · Engine · Fuel/propulsion system
https://static.nhtsa.gov/odi/tsbs/2019/MC-10170730-9999.pdf It is this issue. I just bought my truck at 83000 miles and toyota would not fix it since it is 3000 miles over the emission warranty.
- Fuel/propulsion system
We were recently advised our 2017 Tundra needs a new fuel pump because it is not getting enough compression. We were told the 2018 Toyota Tundra and many other vehicles made by Toyota have been recalled for this exact same issue we are having but there have not been enough complaints about the…
We were recently advised our 2017 Tundra needs a new fuel pump because it is not getting enough compression. We were told the 2018 Toyota Tundra and many other vehicles made by Toyota have been recalled for this exact same issue we are having but there have not been enough complaints about the 2017. Well here’s a complaint. I have to pay for a fuel pump known to be bad by Toyota but since enough people haven’t complained about a problem they are aware of isn’t fair. Please put my complaint in so something might be done about this.
- Steering
Vehicle was driven 30 miles to work with no steering issues and parked in work parking lot. Upon returning to vehicle to return home when backing out of parking spot the front driver wheel would not turn almost causing me to back into parked car next to me. I looked under the front of the driver…
Vehicle was driven 30 miles to work with no steering issues and parked in work parking lot. Upon returning to vehicle to return home when backing out of parking spot the front driver wheel would not turn almost causing me to back into parked car next to me. I looked under the front of the driver side tire, and noticed the outer tie rod was hanging down, and was causing the no steering issue. I called a tow truck, and had the vehicle taken to the Toyota dealer where vehicle was purchased new. I informed the dealer to be careful with the vehicle as the outer tie rod on driver side was broken and was not possible to drive. The Toyota dealer investigated the issue and found that the threads on bother inner and outer tie rods on both passenger and driver side was stripped. All outer and inner tie rods on the vehicle had to be replaced due to the threads being stripped on all 4 tie rods. My concern is this truck only has 86,000 miles on it, and if I had been travelling on interstate at 70MPH and the tie rod broke it would have resulted in a catastrophic collision due to a no steering condition. This vehicle has never sustained any front end damage of any type. I can provide the dealers name and the notes on the repair bill from the Toyota dealership stating exactly what I have stated in this report.
- Electrical system · Engine · Vehicle speed control
As I am driving down the pickup loses power/ has no power. Was driving down the interstate and trying to make it up the Harbor bridge I could only go 40. Then try to pass a semi that (BAD DRIVER) was dangerously close, I could not even pass him. Not to mention people were angry at me and getting…
As I am driving down the pickup loses power/ has no power. Was driving down the interstate and trying to make it up the Harbor bridge I could only go 40. Then try to pass a semi that (BAD DRIVER) was dangerously close, I could not even pass him. Not to mention people were angry at me and getting defensive. There were no warning lights, I took it in immediately. It has been inspected by my secondary warranty I purchased. ( Tripple Diamond 1-833-909-0015 or 1-844-526-0415 our policy # is [XXX] under [XXX] -So I take it to the Toyota Dealership in Corpus Christi Texas, They then tell me it is my Secondary air pump (both Sides) and Valves including Gasket, Air Tube, Pump Assembly, air, (2 both sides)/inlet, Air pump(1) and valve set, emission (1) That was on 12-16-2022 (it has been there since) this will cost me $3,205.38 out of pocket. But the real problem is that there is a long waiting list of people waiting for this same part, so no one can get it. Many people with the same problem last I called I was 44 people in line. I only have 75,000 miles on my truck, and still have the same tires That are in great shape (I rotate them) So for this to happen seems strange, I take special care of this truck. INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
- Fuel/propulsion system
Fuel Pump failed. Vehicle is currently at dealership awaiting 2+ week repair. Currently available to inspect. Failure began while driving. Caused misfire in cylinder 1, caused electrical fault that disabled traction control. Potential to leave the vehicle inoperable on the roadside poses a safety…
Fuel Pump failed. Vehicle is currently at dealership awaiting 2+ week repair. Currently available to inspect. Failure began while driving. Caused misfire in cylinder 1, caused electrical fault that disabled traction control. Potential to leave the vehicle inoperable on the roadside poses a safety risk. Toyota dealership in possession states "START WITH FUEL PUMP, REPORGRAM ECM PER TSB AND RELEARN FUEL DENSITY FOR ALCOHOL CONTENT FLEX FUEL VEHICLE, OUT OF WARRANTY FOR TSB" Toyota dealership is the only entity to perform any inspection. There were no warning lamps or messages related to the fuel system. Check engine light and message stating "Traction Control Off" appeared while driving the vehicle. After limping the vehicle home, the vehicle would not start.
- Electrical system · Exterior lighting
When driving at night, the front lights of the vehicle turn off randomly. Been driving on an highway at going at 75mph and randomly the headlights shuts off. Happened 4 times in the past year.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Electrical overstress
The Office of Defects Investigation (ODI) opened this investigation to determine if the failure of airbags to deploy during severe crashes, in certain vehicles, was the result of a safety related defect. During the investigation a complex failure was studied that can result in non-deployment of subject vehicle air…
The Office of Defects Investigation (ODI) opened this investigation to determine if the failure of airbags to deploy during severe crashes, in certain vehicles, was the result of a safety related defect. During the investigation a complex failure was studied that can result in non-deployment of subject vehicle air bags and other restraint system devices in severe crash events. The subject vehicles may be equipped with an airbag control unit (ACU) for the supplemental restraint system (SRS) Electronic Control Unit (ECU) manufactured by ZF-TRW. The ECU receives signals from crash sensors mounted in the vehicle and deploys the vehicle air bags and seat belt pretensioners in accordance with manufacturer design specifications. The ECU in the subject vehicles contains a model DS84 application-specific integrated circuit (ASIC) which controls the communication of the crash sensor signal, firing commands (i.e., when to deploy the airbag(s) and/or pretensioners), and fault information (e.g., diagnostic trouble codes). In September 2016, FCA announced recall 16V-668 for certain model year (MY) 2010 to 2014 Chrysler, Dodge and Jeep products manufactured with the subject ZF-TRW ACU. In this recall, FCA discussed an EOS condition that resulted in a failure of the subject DS84 ASIC, which caused air bag non-deployment. FCA noted that the defect condition had only been observed in vehicles equipped with sensor harnessing routed across the front of the vehicle. Other FCA vehicles that also used the subject ACU, but were not equipped with cross-car harnessing, had not experienced EOS failures, despite similar time in service. During the course of this investigation, ODI sent two separate Information Request (IR) letters to six vehicle manufactures (including FCA, Hyundai, Honda, Kia, Mitsubishi, and Toyota) and one IR letter to ZF-TRW. These IR letters resulted in ODI receiving comprehensive data from these manufacturers and suppliers. Studies of this data found that the DS84 ASIC does not have sufficient protection against negative electrical transients or electrical overstress (“EOS”) that can be generated in certain severe crashes. An electrical transient occurs when the electrical power supplied to a circuit changes momentarily over a short duration of time. In these severe crash cases, the crash sensors and other powered wiring can be damaged and short circuited so as to create a negative electrical transient of sufficient intensity and duration (that are outside the vehicle manufacturer's specification) to damage the ASIC before the restraint device deployment signal is received by the SRS ECU. This damaged signal can lead to incomplete or nondeployment of the air bags and/or pretensioners. Airbag non-deployment and/or lack of pretensioner operation can increase the risk or severity of injury in a crash.A total of 8 fatalities and 14 injuries were associated with known EOS events. The common element in all investigated manufacturers vehicles is the SRS ECU containing a DS84 ASIC manufactured by ZF-TRW. The risk associated with the ASIC is equally shared among all OEMS involved in the investigation. The actual real-world risk can be mitigated by other factors which were assessed by ODI during this investigation. The first mitigating factor involves protections built into the ACU design which protect the DS84 ASIC from damage. There are multiple strategies and levels of protection employed by different OEMs that provide effective EOS mitigation. The two most common strategies at the ACU level are circuit protection diodes on the remote senor signal lines, and current limiting resistors that protect critical components. The second mitigating factor is found at the vehicle level and involves the location and routing of the wires leading from the crash sensors to the SRS ECU. If the wires are well protected in a crash and are not routed with other power wires carrying large currents, the risk for an EOS event is significantly reduced or eliminated. These design specific factors combine to produce a spectrum of risk for the vehicles equipped with ACUs using the DS84 ASIC. Given the many of years of field exposure, it is possible to divide the subject population into two groups; vehicles which have experienced EOS events, and vehicles which have not experienced EOS field events. Four of the six OEMs involved in this investigation have experienced EOS field events on at least one of their models equipped with a DS84 ASIC. All vehicle models (including the Toyota models identified in the Failure Report Summary of the opening resume for this investigation) with field events have been recalled. In an abundance of caution, ODI kept this investigation open five years to monitor field performance and did not identify any field events on vehicles not included in existing safety recalls. Given the spectrum of risk identified in this investigation and that all vehicles with a demonstrated unreasonable risk have been recalled, ODI is closing this investigation. ODI is closing this investigation with the following manufacturer safety recalls: 16V-668, 18E-043, 18V-137, 18V-363, and 20V-024. With the recall actions taken by the subject vehicle and equipment manufacturers, this investigation is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exists on other model or model year vehicles outside of the recall scopes. The agency reserves the right to take further action if warranted by the circumstances.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10244115TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10224108TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10224102TSB: Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 01013E), Entune? Audio Plus (version 010156 or 01015C), or Entune? Premium Audio (versions 010171, 010170, or 01017D) may exhibit one or more of the following conditions: ?Head unit reboots at a specific location. ?Abnormal Destination Search app operation. ?Rebooting caused by no songs on the USB-connected iPhone. ?A one-time reboot after ignition is cycled to ACC-ON. ?Audio stays muted after the key is cycled. Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 010144), Entune? Audio Plus (version 01015E), Entune? Premium Audio (version 010182), or earlier may exhibit one or more of the following conditions: ?Head unit reboots intermittently. ?Home screen intermittently half blank after shifting out of reverse, if the driver uses reverse after using the maintenance reminder screen. ?Screen freezes during an incoming phone call. ?Incorrect time displays on the diagnostic menu. ?Radio station information does not match the radio station that is playing.?Abnormal playlist browsing operation. ?Mute stays enabled after key cycle. ??Search along my route? is inoperative. ?Traffic data scales improperly. ?Unit of measure is missing from distance to destination (showing ?11? instead of ?11mi/km?). ?Multi-information display (MID) compass does not match navigation screen when switching to North up. ?Navigation does not match MID when switching from miles to kilometers. ?Speed limit is blank on navigation screen. ?Go button on VR screen is inoperative. Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 010145), Entune? Audio Plus (version 010161), Entune? Premium Audio (version 010189), or earlier may exhibit one of the following conditions: ?Map will not display after it has been reprogrammed from the map micro SD card. Updated system software is now
- 10220183TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10220177TSB: Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 01013E), Entune? Audio Plus (version 010156 or 01015C), or Entune? Premium Audio (versions 010171, 010170, or 01017D) may exhibit one or more of the following conditions: ?Head unit reboots at a specific location. ?Abnormal Destination Search app operation. ?Rebooting caused by no songs on the USB-connected iPhone. ?A one-time reboot after ignition is cycled to ACC-ON. ?Audio stays muted after the key is cycled.
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10220142OBSOLETE NOTICE May 02, 2022: This bulletin is now obsolete. Please see T-SB-0045-22
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10211830Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 01013E), Entune? Audio Plus (version 010156 or 01015C), or Entune? Premium Audio (versions 010171, 010170, or 01017D) may exhibit one or more of the following conditions: ?Head unit reboots at a specific location. ?Abnormal Destination Search app operation. ?Rebooting caused by no songs on the USB-connected iPhone. ?A one-time reboot after ignition is cycled to ACC-ON. ?Audio stays muted after the key is cycled. Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 010144), Entune? Audio Plus (version 01015E), Entune? Premium Audio (version 010182), or earlier may exhibit one or more of the following conditions: ?Head unit reboots intermittently. ?Home screen intermittently half blank after shifting out of reverse, if the driver uses reverse after using the maintenance reminder screen. ?Screen freezes during an incoming phone call. ?Incorrect time displays on the diagnostic menu. ?Radio station information does not match the radio station that is playing.?Abnormal playlist browsing operation. ?Mute stays enabled after key cycle. ??Search along my route? is inoperative. ?Traffic data scales improperly. ?Unit of measure is missing from distance to destination (showing ?11? instead of ?11mi/km?). ?Multi-information display (MID) compass does not match navigation screen when switching to North up. ?Navigation does not match MID when switching from miles to kilometers. ?Speed limit is blank on navigation screen. ?Go button on VR screen is inoperative. Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 010145), Entune? Audio Plus (version 010161), Entune? Premium Audio (version 010189), or earlier may exhibit one of the following conditions: ?Map will not display after it has been reprogrammed from the map micro SD card. Updated system software is now avail
- 10208995TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10207963TSB This Service Bulletin includes guidelines meant to help determine whether to repair or replace a wire harness assembly based on damage type. This Service Bulletin should be used in conjunction with the applicable model and model year Electronic Wiring Diagram (EWD) and/or Repair Manual.
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10204571TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10204555TT: Some customers may experience echoing on the line calling the vehicle when using Bluetooth Hands Free. This is caused by the phone Hands Free volume being too low. These settings may need to be reapplied any time the phone is paired to a new head unit, a phone update is applied, or the phone is un-paired and re-paired.
- 10203532TT: Some customers may encounter Bluetooth connectivity concerns such as: ?Difficulty to pair the phone. ?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
- 10198150Updates to the 2014-2021 toyota universal flat rate manual
Every Toyota Tundra model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.