2011 Toyota Tundra
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Tundra › 2011
These records cover every 2011 Toyota Tundra. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
11 recalls name the 2011 Toyota Tundra. Newest first.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain JTEKT power steering gear assembly service parts for 2007-2021 Tundra and 2008-2022 Sequoia, part numbers 44250-0C160, 44250-0C131, 44250-0C170, and 11250-0C121. The power steering gear assembly may have been manufactured incorrectly, which can result in an oil leak.
Risk and remedy
Risk
An oil leak may cause a sudden loss of power steering assist, increasing the risk of a crash.
Remedy
Dealers will inspect and replace the power steering gear assembly, free of charge. Owner notification letters were mailed on February 17, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 21TH01.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2008-2022 Sequoia and 2007-2021 Tundra vehicles. The power steering gear assembly may have been manufactured incorrectly, which can result in an oil leak.
Risk and remedy
Risk
An oil leak may cause a sudden loss of power steering assist, increasing the risk of a crash.
Remedy
Dealers will inspect and replace the power steering gear assembly as necessary, free of charge. Owner notification letters were mailed on January 21, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are 21TB10 and 21TA10.
Toyota Motor Company (Toyota) is recalling certain model year 2009-2011 Tundra, Sequoia, Corolla, Corolla Matrix and Scion xB, 2008-2011 Highlander and Highlander Hybrid, 2007 Camry and Camry Hybrid, 2009 Camry and Camry Hybrid, 2006-2011 RAV4, 2006-2010 Yaris, and 2009-2010 Scion xD and Pontiac Vibe vehicles. During the manufacturing of the Power Window…
Risk and remedy
Risk
If the sliding electrical contacts are not protected by lubricant, debris and moisture that get into the switch may cause a short circuit and the switch assembly may overheat and melt, increasing the risk of a fire.
Remedy
Toyota will notify owners, and dealers will inspect the switch, applying a lubricant if no abnormality is found. If abnormality is found, the PWMS circuit board will be replaced, free of charge. The recall is expected to begin December 20, 2015. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is C0M.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion…
Risk and remedy
Risk
Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
Remedy
SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.
Southeast Toyota is recalling certain model year 2008 and 2010-2013 Toyota Tundra, 2010-2012 Rav4, 2012 Toyota Sequoia, 2010-2011 Toyota Corolla, 2010-2011 Toyota Camry and Camry Hybrid, 2010-2013 Toyota Highlander and Highlander Hybrid, 2010-2013 Toyota FJ Cruiser, 2011 Toyota Land Cruiser, 2010-2013 Toyota Venza, 2010-2011 Toyota 4Runner, 2010-2013 Toyota…
Risk and remedy
Risk
An inaccurate label could lead to owners overloading their vehicles and tires. An overloaded vehicle can result in a tire failure which may result in a vehicle crash, personal injury, or property damage.
Remedy
Southeast Toyota will notify owners and provide a corrected label with instructions concerning its installation. A small group of the affected vehicles will need additonal remedies which are still being developed. The recall began on May 28, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013…
Risk and remedy
Risk
If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. This could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.
Remedy
Southeast Toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on March 21, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Gulf states toyota IS recalling certain model year 2011 tundra vehicles that have an inaccurate load carrying capacity label. these vehicles fail to comply with the requirements of federal motor vehicle safety standard no. 110, tire selection and rims.
Risk and remedy
Risk
An inaccurate label could lead to vehicle overloading which could result in tire failure, increasing the risk of a crash.
Remedy
Gulf states toyota will notify owners and will provide a corrected label free of charge. the customer will have the option for dealers to install the label free of charge. the safety recall began on may 24, 2012. owners may contact gulf state toyota at 1-800-444-1074.
Southeast toyota IS recalling certain model year 2007-2011 tundra vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 138, "tire pressure monitoring systems." the TPMS on some vehicles may not have been properly calibrated and as a result the low tire pressure warning lamp may not illuminate should the…
Risk and remedy
Risk
Drivers will not receive a warning from the tire pressure monitor that one or more tires are underinflated, increasing the risk that the vehicle will be driven with one or more underinflated tires, increasing the risk of a tire failure that may lead to a crash.
Remedy
Dealers will recalibrate the tire pressure monitoring system in accordance with the regulation free of charge. the safety recall began during july 2011. owners may contact southeast toyota customer assistance center toll free at 1-800-301-6859, monday through friday, 8:30 am to 5:00 pm, eastern standard time.
Toyota IS recalling certain model year 2011 tundra vehicles equipped with a 3-joint type propeller shaft. due to improper casting of the slip yokes, there IS a possibility that the slip yoke may break, causing the propeller shaft to separate at the joint and come into contact with the road surface.
Risk and remedy
Risk
The driver could experience loss of motive power and vehicle control, increasing the risk of a crash.
Remedy
Toyota will notify owners and inspect the propeller shaft and, if necessary, replace it free of charge. the safety recall IS expected to begin during may 2011. owners may contact toyota at 1-800-331-4331.
Gulf states toyota IS recalling certain model year 2011 FJ cruiser and model year 2009-2011 tundra vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 138, "tire pressure monitoring systems." the TPMS on some vehicles may not have been properly calibrated and as a result the low tire pressure warning lamp may…
Risk and remedy
Risk
Drivers will not receive a warning from the tire pressuring monitor that one or more tires are underinflated increasing the risk that a vehicle will be driven with one or more underinflated tires and increasing the risk of a tire failure that may lead to a crash.
Remedy
Dealers will recalibrate the tire pressure monitoring system in accordance with the regulation free of charge. the safety recall IS expected to begin during june 2011. owners may contact gulf state toyota customer assistance center toll free at 1-800-444-1074 monday through thursday, 8:30 am to 5:00 pm, or friday 8:30 am to 4:00 pm central standard time.
Toyota IS recalling certain model year 2008 through 2011 FJ cruiser, land cruiser, tacoma, sequoia and tundra vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 138, "tire pressure monitoring system (TPMS)." when factory-installed wheels and tires were replaced with toyota authorized accessory wheels and LT…
Risk and remedy
Risk
Failure to warn of tire deflations IS a non-compliance with fmvss 138 and could lead to tire failure increasing the risk of a crash.
Remedy
For the land cruiser, sequoia, tacoma and tundra vehicles, the dealer will re-calibrate the tire pressure monitoring system on affected vehicles and install an updated tire and loading information label at no charge. for the FJ cruiser vehicles, the TPMS cannot be reset so the electronic control unit (ecu) for the TPMS will be replaced. toyota IS currently developing the remedy ecu. if an owner IS not certain whether his or her vehicle IS equipped with these accessories, please contact any toyota dealer for an inspection at no charge. the safety recall began on march 31, 2011. owners may contact toyota at 1-800-331-4331.
Owner complaints
134 complaints6 involved a crash5 injuries
What owners report most
Latest complaints
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2011 Toyota Tundra. It was discovered that there was a mileage discrepancy after the purchase. The vehicle was a private sale. At the time of the purchase, the mileage was 147,497, and at the time of registration, it was discovered that the mileage was 275,143.
- Power train
The contact owns a 2011 Toyota Tundra. The contact stated that while attempting to accelerate from a red traffic light, the vehicle failed to accelerate as intended while depressing the accelerator pedal. No warning light was illuminated. The vehicle was towed to the residence and remained at the…
The contact owns a 2011 Toyota Tundra. The contact stated that while attempting to accelerate from a red traffic light, the vehicle failed to accelerate as intended while depressing the accelerator pedal. No warning light was illuminated. The vehicle was towed to the residence and remained at the residence for further investigation. In addition, a local independent mechanic was contacted, and the contact was informed that the failure was possibly related to NHTSA Campaign Number: 11V254000 (Power Train). The local dealer was contacted; however, the VIN was not included in the recall. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 174,000.
- Unknown or other
I took my truck to the dealership of Toyota in Riverside, CA and the staff there told me there was no recall for my vehicle. Can you please verify if my vehicle is under warranty? I also went to the smog inspection and told them about my situation and they said my vehicle may not be under recall since sometimes certain vehicles under the same year are grouped together with a specific recall.
- Structure › Body
Paint prematurely chipping in areas that’s would and would not be affected by wind down to bare metal.
- Structure › Body
Extensive rust and rot of entire frame, and undercarriage. The truck bed unsafe to walk on has several soft spots almost broken through, gas tank holder rusted out- worry about gas tank dropping from frame, tow hitch and rear bumper rot etc. Side step fell off. Toyota has a Service Campaign and…
Extensive rust and rot of entire frame, and undercarriage. The truck bed unsafe to walk on has several soft spots almost broken through, gas tank holder rusted out- worry about gas tank dropping from frame, tow hitch and rear bumper rot etc. Side step fell off. Toyota has a Service Campaign and Warranty Enhancement Program for Tundra but not this year- built 9/2010 San Antonio but listed as 2011 model on VIN. I am original registered owner and have never been contacted about this factory failure use of inferior untreated frame materials but learned about it from internet research. Would like my vehicle covered under current Service Campaign.
- Steering
The contact owns a 2011 Toyota Tundra. The contact stated while driving 40-50 MPH downhill, the vehicle lost power steering functionality. There was no warning light illuminated. The contact pulled to the side of the road. The contact stated that upon inspecting the vehicle, there was an oil leak…
The contact owns a 2011 Toyota Tundra. The contact stated while driving 40-50 MPH downhill, the vehicle lost power steering functionality. There was no warning light illuminated. The contact pulled to the side of the road. The contact stated that upon inspecting the vehicle, there was an oil leak on the passenger's side of the steering gear onto the ground. The contact was able to drive the vehicle to the destination without power steering functionality. The vehicle was towed to the dealer, where it was diagnosed that the steering rack had failed and needed to be replaced. The dealer informed the contact that the steering rack replacement could not be covered under warranty due the part number. The vehicle was not repaired and remained at the dealer. The contact related the failure to NHTSA Campaign Number: 21E103000 (Steering); however, the VIN was not included. The manufacturer was notified of the failure, but no assistance was provided. The failure mileage was approximately 121,000.
- Steering
Rack and pinion is leaking oil.
- Structure › Frame and members
The contact owns a 2011 Toyota Tundra. The contact stated that upon loading the bed of the truck, a worker stepped on the bed and his foot went through the bed. There was no injury sustained. The contact then noticed that there were four 3-inch holes located near the bed bolts of the vehicle due to…
The contact owns a 2011 Toyota Tundra. The contact stated that upon loading the bed of the truck, a worker stepped on the bed and his foot went through the bed. There was no injury sustained. The contact then noticed that there were four 3-inch holes located near the bed bolts of the vehicle due to corrosion. Additionally, the contact stated that the frame was corroded. The contact related the failure to TSB Number: [XXX]. The contact stated that he was an independent mechanic and had determined that the failure occurred because there was no underbody coating on the vehicle, which caused water to be trapped on the underbody. The local dealer was contacted, but no assistance was provided. Another dealer, Oakbrook Toyota (550 E Ogden Ave, Westmont, IL 60559), was notified of the failure and referred the contact to the NHTSA Hotline for assistance. The vehicle was not repaired. The manufacturer was notified of the failure and informed the contact that they could not assist because the VIN was not included in a recall. The failure mileage was approximately 68,000. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Engine
The contact owns a 2011 Toyota Tundra. The contact stated while driving at an undisclosed speed, the check engine waning light illuminated. The vehicle was taken to the dealer to be diagnosed. The contact was informed of secondary error in the injection system caused by water intrusion. The contact…
The contact owns a 2011 Toyota Tundra. The contact stated while driving at an undisclosed speed, the check engine waning light illuminated. The vehicle was taken to the dealer to be diagnosed. The contact was informed of secondary error in the injection system caused by water intrusion. The contact was also informed that there was a recall on the vehicle however, the vehicle had exceeded the mileage limitation. The vehicle was repaired but the failure persisted. The manufacturer was not made aware of the failure. The approximate failure mileage was 219,000.
- Air bags · Electrical system · Unknown or other
Horn stopped working right after I bought this truck from a dealer. I did some research on why it stopped. I was told and also read that it was the air bag clock spring. This controls the air bags and horn and other components. What it is the clock spring was installed by Toyota that had a bad spot…
Horn stopped working right after I bought this truck from a dealer. I did some research on why it stopped. I was told and also read that it was the air bag clock spring. This controls the air bags and horn and other components. What it is the clock spring was installed by Toyota that had a bad spot on it. This causes the wiring harness to start rubbing and cutting into the wires. Would cause the horn to stop working and the air bags not to work and other things that is wired to this harness also. This should be a safety concern, and Toyota needs to recall to fix. Read that the 2011 Toyota's was bad for doing this. Costing the customer about $800.00 to fix. I have the truck about 3 months. Might be the reason it was traded in. Works some times and doesn't work. I am worried the air bags will deploy if not fixed. Please check into this. I would like to know what you find out before I spend the money to get it fixed On Social Security and don't have that much money in hand to have fixed.
- Engine · Power train · Vehicle speed control
* According to the different computers codes the issue is Secondary Air Injection Pump failure. *Driving on the highway I had the limp mode which created a drastic velocity drop from 70 mph to 40 mph which created a situation that almost ended up in having another car hitting me from behind. this…
* According to the different computers codes the issue is Secondary Air Injection Pump failure. *Driving on the highway I had the limp mode which created a drastic velocity drop from 70 mph to 40 mph which created a situation that almost ended up in having another car hitting me from behind. this incident occurred a coupled of times in highway but in most cases just when starting a cold engine * problem is widely encountered online by other users [XXX] [XXX] [XXX] * check engine and track lights off * First time it occurred is 10/02/2023 INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Steering
My power steering is leaking fluid, I didn't have anymore and had a loss of steering power while driving. So far I have just added more fluid, but haven't driven it since.
- Electrical system · Service brakes · Structure › Body
On 11/25/22 I meet with American Auto Mall to buy a used truck I was assured through text, website and window sticker that the truck was in excellent condition inside and out.. I have all this documents proofing this.. I did van limited inspection at the lot and a test drive.. found nothing that…
On 11/25/22 I meet with American Auto Mall to buy a used truck I was assured through text, website and window sticker that the truck was in excellent condition inside and out.. I have all this documents proofing this.. I did van limited inspection at the lot and a test drive.. found nothing that stuck out.. other than the radio not working but the dealership said he would reimburse me if I got it fixed..so after that a down payment was made of $5550 dollars and paperwork was signed.. I drove the truck home and the next week I got in it and it wouldn't start, turns out it needed a battery and alternator, so I took it to a shop and was told that this vehicle was badly rusted and had a lot of hidden rust damage.. and improperly installed brakes., coolant leaks and exhaust leaks.. after finding this out I tried to call the dealership and he hasn't been replying.. I was also told this truck wouldn't pass a legal VA inspection.. so the current one was fraudulent I have all documents that support my case. I will like to turn this vehicle back in and given a full refund
- Unknown or other
Engine light, 4Lo light, and ASC light on with code P2442. Vehicle in limp mode.
- Steering
The contact owns a 2011 Toyota Tundra. The contact stated that upon starting the vehicle, the steering wheel was difficult to maneuver. There was no warning light illuminated. The contact was able to drive the vehicle to his residence using physical force to steer the vehicle. An independent…
The contact owns a 2011 Toyota Tundra. The contact stated that upon starting the vehicle, the steering wheel was difficult to maneuver. There was no warning light illuminated. The contact was able to drive the vehicle to his residence using physical force to steer the vehicle. An independent mechanic met the contact at his residence and diagnosed that the power steering gear was leaking oil into the boot. The vehicle was then towed to the dealer but was not diagnosed or repaired. The contact associated the failure with NHTSA Campaign Number: 21E103000 (Steering) however, the VIN was not included. The manufacturer was not notified of the failure. The failure mileage was approximately 79,000.
- Engine
1. The secondary air injection valve and/or air injection pump. 2. Sometimes the vehicle will go into "limp" mode and only go 35 mph. If the switch valve is stuck "closed" like mine, the car may not be able to dilute the exhaust fumes and the fumes and travel into the cabin of the vehicle. 3. Yes…
1. The secondary air injection valve and/or air injection pump. 2. Sometimes the vehicle will go into "limp" mode and only go 35 mph. If the switch valve is stuck "closed" like mine, the car may not be able to dilute the exhaust fumes and the fumes and travel into the cabin of the vehicle. 3. Yes, check engine light code was read as P2441. 4. No, the vehicle can not be driven at this time. 5. No, and around July 24th the check engine light came on. The symptoms continued to get worse. In short, Toyota has issued extended warranties and reimbursements for this design flaw for Tunda's 2007-2010. The design flaw being the air pumps allow water and debris to be sent into the air injection valves. My truck being a 2011 was never alerted to this issue or covered due to the year of my vehicle. The issue is my truck is the SAME generation truck as the 2007-2010 trucks. Which means I too have the design flaw as well but Toyota is refusing to fix their mistakes. After further inspection of my truck, see attached pictures, there is obvious water in the valve system and it has been rusted as well (unable to clean it). My issue is Toyota only covering half of the generational years for a design flaw that is also in the other half. These repairs can range from $2k-$4k and it seems as Toyota only made the extension to the most relevant truck years at the time and left everyone else behind. It is very distributing that a large manufacturer would cut corners like this, for a flaw that was their design.
- Engine
The contact owns a 2011 Toyota Tundra. The contact stated that while a routine inspection was being performed on the vehicle, he was informed that engine oil was found on the heat shield. The dealer diagnosed the vehicle and determined that the passenger’s side cam-tower was leaking oil and needed…
The contact owns a 2011 Toyota Tundra. The contact stated that while a routine inspection was being performed on the vehicle, he was informed that engine oil was found on the heat shield. The dealer diagnosed the vehicle and determined that the passenger’s side cam-tower was leaking oil and needed to be replaced. The vehicle had not been repaired. The manufacturer was made aware of the failure. The approximate failure mileage 32,000.
- Engine · Vehicle speed control › Accelerator pedal
The contact owns a 2011 Toyota Tundra. The contact stated while driving approximately 55-70 MPH, the check engine warning light illuminated and the vehicle started losing power. The contact veered to the side of the road and turned off the vehicle. The contact restarted the vehicle and was able to…
The contact owns a 2011 Toyota Tundra. The contact stated while driving approximately 55-70 MPH, the check engine warning light illuminated and the vehicle started losing power. The contact veered to the side of the road and turned off the vehicle. The contact restarted the vehicle and was able to continue driving. Additionally, the contact stated that upon starting the vehicle, the accelerator pedal was depressed; however, there was a delay in the vehicle response. The contact stated that the failure reoccurred several times while driving. The contact stated that the vehicle shifted into LIMP mode. The vehicle was taken to a local Pep Boys who provided diagnostic test codes to the contact but did not physically diagnose the vehicle. The vehicle was taken to the dealer. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure and informed the contact they could not assist as the vehicle had not been diagnosed by the dealer. The failure mileage was approximately 165,000.
- Structure › Body · Structure › Frame and members
The contact owns a 2011 Toyota Tundra. The contact stated that the truck bed bolts that secured the truck bed to the subframe were rusted. The vehicle was taken to the dealer however, the contact was informed that the VIN was not under recall relating the failure. No additional assistance was provided. The manufacturer was contacted and notified of the failure. The failure mileage was 104,000.
- Unknown or other
I have reached out to Toyota multiple times this month. I have severe rust developing und the bed of my truck where the bed bolts fasten the bed to the frame. After some research I have found where other tundra owners with the same year have similar issues. My fear is over time the bed is going to…
I have reached out to Toyota multiple times this month. I have severe rust developing und the bed of my truck where the bed bolts fasten the bed to the frame. After some research I have found where other tundra owners with the same year have similar issues. My fear is over time the bed is going to be unsecured from the chassis. Rust is bubbling the line-x up. I have never seen anything like this before. Toyota refuses to accept responsibility that they have a parts/material/metal issue for this year truck.
- Steering
The contact owns a 2011 Toyota Tundra. The contact stated that while driving at an unknown speed, the steering wheel was difficult to turn with an unknown warning light illuminated. In addition, the contact noticed that the power steering fluid was leaking out on the passenger’s side of the…
The contact owns a 2011 Toyota Tundra. The contact stated that while driving at an unknown speed, the steering wheel was difficult to turn with an unknown warning light illuminated. In addition, the contact noticed that the power steering fluid was leaking out on the passenger’s side of the vehicle. The vehicle was taken to an independent mechanic where it was diagnosed that the rack and pinion needed to be replaced. The vehicle was repaired however, a power steering fluid leak recurred. The vehicle was taken to another independent mechanic to be diagnosed; however, the contact was unaware of the cause of the failure. The vehicle was not repaired. The dealer was not contacted. The manufacturer was not notified of the failure. The approximate failure mileage was unknown.
- Power train › Driveline › Driveshaft
The contact owns a 2011 Toyota Tundra. The contact stated while driving at various speeds, the vehicle was shaking and vibrating and was making an abnormally loud sound. The vehicle was taken to an independent mechanic to be diagnosed. The contact was informed that the driveshaft was fractured. The…
The contact owns a 2011 Toyota Tundra. The contact stated while driving at various speeds, the vehicle was shaking and vibrating and was making an abnormally loud sound. The vehicle was taken to an independent mechanic to be diagnosed. The contact was informed that the driveshaft was fractured. The contact was notified of the NHTSA Campaign Number: 11V254000 (Power Train) however, the VIN was not included. The local dealer was informed of the failure. The manufacturer was notified of the failure and referred the contact to the NHTSA for assistance. The approximate failure mileage was 100,000.
- Unknown or other
Vehicle Frame rusting extensively. Vehicle could possibly fall apart. Local gas station diagnosed it per inspection.
- Air bags · Electrical system · Steering
Horn siren is not being activated when pressed by center switch on steering wheel. After researching many tundra message boards, this appears to be a frequent problem amongst tundra owners. Incident: vehicle in front of me at drivethru backed into me when they thought they were in drive after repositioning themselves for mic. I was not able to beep my horn and warn them. Luckily no damage occurred.
- Engine
Well known issue with V8 Air intake pump and assembly causes truck to go into limp mode. Very dangerous in Atlanta traffic. Toyota enhanced warranty but did not recall. My repair was $3000 as I was 3 weeks out of warranty.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10235241TT: Some 2007 ? 2012 model year Tundra vehicles may exhibit a rubbing or grinding noise from the rear when making left-hand or right-hand turns. New parking brake plate sub-assemblies have been developed to address this condition.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10224108TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10220183TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10210375TSB: This Service Bulletin includes procedures to replace damaged or loose front carpet floor retainer(s) without replacing the carpet assembly. Follow the Repair Procedure in this bulletin to replace the loose or damaged carpet floor retainer(s).
- 10208995TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10204571TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10203532TT: Some customers may encounter Bluetooth connectivity concerns such as: ?Difficulty to pair the phone. ?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
- 10197476Replacement vin plates.
- 10197473Product general information.
- 10190460Toyota Safety Recall and Service Campaign - Technician Certification Requirements
- 10190453TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10190450OBSOLETE NOTICE March 08, 2021: This bulletin is now obsolete. Please see T-SB-0012-21.
Every Toyota Tundra model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.