2013 Toyota Tundra
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Tundra › 2013
These records cover every 2013 Toyota Tundra. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
6 recalls name the 2013 Toyota Tundra. Newest first.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain JTEKT power steering gear assembly service parts for 2007-2021 Tundra and 2008-2022 Sequoia, part numbers 44250-0C160, 44250-0C131, 44250-0C170, and 11250-0C121. The power steering gear assembly may have been manufactured incorrectly, which can result in an oil leak.
Risk and remedy
Risk
An oil leak may cause a sudden loss of power steering assist, increasing the risk of a crash.
Remedy
Dealers will inspect and replace the power steering gear assembly, free of charge. Owner notification letters were mailed on February 17, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 21TH01.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2008-2022 Sequoia and 2007-2021 Tundra vehicles. The power steering gear assembly may have been manufactured incorrectly, which can result in an oil leak.
Risk and remedy
Risk
An oil leak may cause a sudden loss of power steering assist, increasing the risk of a crash.
Remedy
Dealers will inspect and replace the power steering gear assembly as necessary, free of charge. Owner notification letters were mailed on January 21, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are 21TB10 and 21TA10.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2013-2017 Toyota Tundra and Sequoia vehicles accessorized with Southeast Toyota accessory 20-inch Rockstar wheels installed by Southeast Toyota or a Southeast Toyota dealer. The Rockstar wheels were installed with lugnuts that may crack and detach.
Risk and remedy
Risk
Lugnuts that crack and detach may cause the wheels to separate from the vehicle, increasing the risk of a crash.
Remedy
SET will notify owners, and dealers will install new replacement lugnuts, free of charge. The recall began June 23, 2017. Owners may contact SET customer service at 1-866-405-4226. SET's number for this recall is SET17A.
Gulf States Toyota, Inc. (GST) is recalling certain model year 2013-2014 Toyota Tundra vehicles modified by GST as part of certain vehicle packages to be equipped with a combination of non-Toyota-brand 20-inch alloy wheels and chrome plated lug nuts. The coating on the lug nuts may give, causing the lug nuts to loosen or the wheel studs to fracture.
Risk and remedy
Risk
If the lug nuts loosen, or the wheel studs fracture, the wheel may separate from the vehicle, increasing the risk of a crash.
Remedy
GST will notify owners, and dealers will replace 20 lug nuts and torque them to specification, free of charge. The recall began in August 2014. Owners may contact GST customer service at 1-800-444-1074.
Southeast Toyota is recalling certain model year 2008 and 2010-2013 Toyota Tundra, 2010-2012 Rav4, 2012 Toyota Sequoia, 2010-2011 Toyota Corolla, 2010-2011 Toyota Camry and Camry Hybrid, 2010-2013 Toyota Highlander and Highlander Hybrid, 2010-2013 Toyota FJ Cruiser, 2011 Toyota Land Cruiser, 2010-2013 Toyota Venza, 2010-2011 Toyota 4Runner, 2010-2013 Toyota…
Risk and remedy
Risk
An inaccurate label could lead to owners overloading their vehicles and tires. An overloaded vehicle can result in a tire failure which may result in a vehicle crash, personal injury, or property damage.
Remedy
Southeast Toyota will notify owners and provide a corrected label with instructions concerning its installation. A small group of the affected vehicles will need additonal remedies which are still being developed. The recall began on May 28, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013…
Risk and remedy
Risk
If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. This could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.
Remedy
Southeast Toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on March 21, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Owner complaints
85 complaints4 involved a crash3 involved a fire3 injuries
What owners report most
Latest complaints
- Unknown or other
I purchased a used vehicle from Tajer Auto LLC (listed as previous owner on my Texas Certificate of Title) with an odometer reading of approximately 138,000 miles. A CARFAX vehicle history report shows the same VIN recorded at 359,812 miles on 03/13/2024, roughly one year before the sale. The…
I purchased a used vehicle from Tajer Auto LLC (listed as previous owner on my Texas Certificate of Title) with an odometer reading of approximately 138,000 miles. A CARFAX vehicle history report shows the same VIN recorded at 359,812 miles on 03/13/2024, roughly one year before the sale. The vehicle was listed for sale online on 03/10/2025. By the time of an emissions inspection on 04/24/2025 — shortly before my purchase — the recorded mileage had dropped to 138,895 miles, a decrease of over 220,000 miles. CARFAX's own report flags this specific entry as a 'Potential Odometer Rollback.' The seller did not disclose this discrepancy to me at the time of sale. I believe the odometer was tampered with prior to the vehicle being sold to me.
- Electrical system › Horn
The contact owns a 2013 Toyota Tundra. The contact stated that the horn failed to operate as needed. The vehicle was taken to an unknown dealer where the contact was informed that there were no recalls on the VIN related to the failure. The contact was provided an estimate for the repair. The…
The contact owns a 2013 Toyota Tundra. The contact stated that the horn failed to operate as needed. The vehicle was taken to an unknown dealer where the contact was informed that there were no recalls on the VIN related to the failure. The contact was provided an estimate for the repair. The manufacturer was notified of the failure, and the contact was provided the same information as provided by the dealer. The vehicle was not repaired. The failure mileage was approximately 130,000.
- Wheels
My factory stock Toyota painted steel wheels rotted and I had a 6 inch long area rusted through inside the rim losing air. I was advised by my tire center ,that i took it to ,that was not safe to drive on. I called my local Toyota dealer service manager and was told it was road corrosion and…
My factory stock Toyota painted steel wheels rotted and I had a 6 inch long area rusted through inside the rim losing air. I was advised by my tire center ,that i took it to ,that was not safe to drive on. I called my local Toyota dealer service manager and was told it was road corrosion and was not under any warranty. What would of happened if I had been on the highway and had a rapid deflation of the tire or what if the wheel broke and came apart. The truck has no rust. I replaced all 4 wheels the very next day. These wheels should be recalled and inspected and replaced if needed before someone gets hurt.
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2013 Toyota Tundra. The contact stated that while the vehicle was taken to a local dealer for repairs, it was discovered that there was a mileage discrepancy. The vehicle was an independent dealer sale. At the time of purchase, the vehicle mileage was 84,00 and upon inspection at a local dealer, it was discovered that the mileage was 175,000.
- Unknown or other
Secondary Air injection pumps went bad
- Vehicle speed control
While driving at various speeds (25mph or 65mph) I let off on the accelerator to either slow down or come to a stop, when accelerating again I get a check engine light and I have no power. I limp along for several minutes then all of a sudden the fuel pedal sensor that tells the ecu where the fuel…
While driving at various speeds (25mph or 65mph) I let off on the accelerator to either slow down or come to a stop, when accelerating again I get a check engine light and I have no power. I limp along for several minutes then all of a sudden the fuel pedal sensor that tells the ecu where the fuel pedal is at catches up and I’m able to continue on with my ride. This is a very dangerous situation to have happen because you are not expecting it and when it does happen it is very unnerving. I’ve spoken to various Toyota dealers and there seems to be a nonchalant attitude about it.
- Engine
Mechanic stated that the secondary air injection system is a common problem in this generation of Tundra.. I have had my check engine light come on 3 different times and addressed each by replacing all the sensors to the secondary air injection system. My mechanic is a Toyota dealer mechanic. My…
Mechanic stated that the secondary air injection system is a common problem in this generation of Tundra.. I have had my check engine light come on 3 different times and addressed each by replacing all the sensors to the secondary air injection system. My mechanic is a Toyota dealer mechanic. My issue is that my car has lost power to accelerate at highway speeds and came close to causing and accident. I am now at my third attempt at replacing now the actual pump. I understand that Toyota has replaced the gooseneck part where the hose is attaches to the pump. This tells me that there was a problem or else why would they change a good thing? Is there a warranty for this part?
- Engine and engine cooling › Exhaust system › Emission control
The contact owns a 2013 Toyota Tundra. The contact stated that upon taking the vehicle in for inspection, the vehicle failed the inspection. The contact was informed that a failure with the air injection pump had been detected. The check engine warning light was illuminated. The vehicle was not…
The contact owns a 2013 Toyota Tundra. The contact stated that upon taking the vehicle in for inspection, the vehicle failed the inspection. The contact was informed that a failure with the air injection pump had been detected. The check engine warning light was illuminated. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 64,000.
- Electrical system · Visibility/wiper
Backup camera cuts in and out. When put in reverse only shows a blue screen. checked connections and seems to happen mostly when it rains.
- Steering
Steering has gone out twice in 2 months. Rack and pinion had to be replaced.
- Fuel/propulsion system
It would crank but not start
- Engine
Cam tower leaks oil on the heat shield below it. Cam tower uses rtv rubber seal instead of a gasket. The rubber deteriorates and the cam tower leaks engine oil on the heat shield. Not clear why Toyota used form in place rubber material instead of real gasket. Repair however is major. Need to…
Cam tower leaks oil on the heat shield below it. Cam tower uses rtv rubber seal instead of a gasket. The rubber deteriorates and the cam tower leaks engine oil on the heat shield. Not clear why Toyota used form in place rubber material instead of real gasket. Repair however is major. Need to take apart engine to repair. Major repair. The fix is to replace it with the same material again. Which is subject to deteriorate again. This is a know issue on the 5.7 L engine. Toyota seems to have its head in the sand hoping they shouldn’t be forced to recall. However this is a know design flaw resulting in leaking oil on the heat shield. With no Toyota recommended new design or parts repair except to do it all over again and hope it doesn’t leak again it’s ridiculous. . Terrible design that leaks oil on the heat shield.
- Seat belts
Plastic piece and spring have ejected from the seat belt receiver and now the receiver does not latch on to the seat belt when it is inserted into the receiver (driver side but could happen to any/all). The seat belt no longer buckles.
- Engine
The contact owns a 2013 Toyota Tundra. The contact stated while driving approximately 70 MPH, the vehicle and steering wheel started shaking. The contact pulled over safely and inspected the vehicle and noticed there was power steering fluid leaking from the vehicle. The vehicle was taken to an…
The contact owns a 2013 Toyota Tundra. The contact stated while driving approximately 70 MPH, the vehicle and steering wheel started shaking. The contact pulled over safely and inspected the vehicle and noticed there was power steering fluid leaking from the vehicle. The vehicle was taken to an independent mechanic who diagnosed the failure as an engine leak. There was initially no warning light illuminated; however, after arriving home, the check engine warning light illuminated. The vehicle was not repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 122,000.
- Wheels
In 2017 while driving home from a restaurant with my husband, mother and sister when on highway 60 in Show Low Arizona we started experiencing a shaking which seemed to come from the from end of the truck. Since we were only a short distance from home we slowly made our way down the side road.…
In 2017 while driving home from a restaurant with my husband, mother and sister when on highway 60 in Show Low Arizona we started experiencing a shaking which seemed to come from the from end of the truck. Since we were only a short distance from home we slowly made our way down the side road. As soon as we turned into our driveway the truck came to a quick stop. We jumped out and found that the passenger front tire and rim had separated from the truck. A full bed tow truck came and took the truck to Hatch Toyota in Show Low Arizona. The second incident occurred last year (2021) while we were moving to Sarcoxie Missouri. My husband was on Interstate 40 just east of Albuquerque when he experienced the truck shaking and upon immediately pulling off to the side of the road noted the left front wheel and rim had separated from the vehicle. The truck was taken to the Albuquerque Toyota for repair. I am having the rims replaced at this time as I understand that after-market rims may be the cause. I would really like to know for sure. I would not want to trade this truck in for fear of another family being harmed.
- Electrical system
We are a surveying company with a fleet of 35 Toyota Tundra trucks. Two of the trucks in our Denver location have had the engine wiring harness chewed and destroyed by rodents in the parking lot. Each is costing $6,500 to repair. The second truck shorted out and the check engine lights came on…
We are a surveying company with a fleet of 35 Toyota Tundra trucks. Two of the trucks in our Denver location have had the engine wiring harness chewed and destroyed by rodents in the parking lot. Each is costing $6,500 to repair. The second truck shorted out and the check engine lights came on, would not start. I am glad this did not fail while someone was driving it. Toyota uses a flexible pipe wrap over some of this wiring that is soy based; the plastic wrapped wiring is unaffected. This problem is well documented on the internet, and very common. Toyota is profiting in a big way from this design defect, and they are compromising safety by risking engine failures due to shorts. They should be forced to install hard plastic wire covers over these harness wires to prevent this damage.
- Structure › Body · Unknown or other
Toyota frame rusting recall is cut off at 2010. I have a 2013 that the bed is rusting out because of the plastic Toyota branded beds the factory installed when it was new. The frame and rear axle also show rusting. I am paying out if pocket to stay safe.
- Air bags · Seat belts
The contact owned a 2013 Toyota Tundra. The contact stated that while driving at an undisclosed speed, another vehicle had run a red light and crashed into the front grill assembly of the contact's vehicle then the other vehicle spun and crashed into the driver side of the contact's vehicle. The…
The contact owned a 2013 Toyota Tundra. The contact stated that while driving at an undisclosed speed, another vehicle had run a red light and crashed into the front grill assembly of the contact's vehicle then the other vehicle spun and crashed into the driver side of the contact's vehicle. The contact's front driver seat moved inadvertently towards the steering wheel but the seat belt did not prevent the contact's neck, chest, and stomach from slamming into the steering wheel. The contact heard a loud bang and the air bags deployed, filling the inside of the vehicle with a powder substance. The contact and passenger were transported to the hospital by ambulance with injuries sustained. A police report was filed. The vehicle was towed to a towing yard and deemed totaled by the insurance company. The manufacturer was made aware of the failure and a case was opened but the manufacturer informed the contact that there was no recall for the air bags associated with the VIN. The failure mileage was 72,120. Consumer stated driver airbag exploded before it could inflate. Driver was injured.
- Seat belts
My seat belt latch quit working the plastic piece and spring came up out of the latch. my vehicle was stationary.
- Exterior lighting · Visibility/wiper
Turned headlight switch to "on" position but lights did not turn on. Turned switch "off" and back "on" and lights still did not work. Wiggled the switch around some and the lights came on. Truck was sitting in my driveway when this happened. I was driving one night and turned my left turn signal on…
Turned headlight switch to "on" position but lights did not turn on. Turned switch "off" and back "on" and lights still did not work. Wiggled the switch around some and the lights came on. Truck was sitting in my driveway when this happened. I was driving one night and turned my left turn signal on and the headlights went off. I was able to wiggle the switch around and get them to come back on to make the turn. When I parked I turned the right turn signal on and the headlights went out again. It seems there IS a short somewhere in the switch.
- Electrical system · Engine · Fuel/propulsion system
On two different occasions I was driving my tundra on the freeway at approx. 70 mph. My truck lost power and I almost caused accidents on both instances since I could not accelerate past 40 mph. I had to manage my way out of the freeway to a safe place. 2TWO diagnostics were performed and I…
On two different occasions I was driving my tundra on the freeway at approx. 70 mph. My truck lost power and I almost caused accidents on both instances since I could not accelerate past 40 mph. I had to manage my way out of the freeway to a safe place. 2TWO diagnostics were performed and I received codes p0418, p1604, c1241, p2445, p2441. I was told by the toyota dealership that there was a problem with a faulty secondary air injection system pump and other components related to the system and I was provided a repair cost of over $3,000 dollars. I was later informed, and I discovered through research, that toyota had installed faulty/defective air pumps in thousands of tundras 2013's like the one that I own. I reached out to corporate office but they stated that my vin number somehow did not "qualify" as one of the affected pickups. My tundra only has 60K miles and I use it to commute from and to work basically. I perform routine maintenance. There IS obviously a problem with a defective secondary air pump system that toyota refuses to fix. My truck IS a liability on the road and this IS my only means of transportation. It looses power and the check engine light activates. Toyota recalled thousands of vehicles like mine and fixed them after they acknowledged that they had placed faulty air pump systems. My truck IS a potential possible cause for an accident since it unpredictably looses power on the freeway. I have not received a solution from headquarters/corporate office to repair my truck at no price since it IS affected by their faulty pumps. They did offer $750 dollars towards the cost of parts, meaning that I have to come out with over $2000k out of pocket. I need toyota to take responsibility and fix my truck.
- Engine
#4 intake valve spring broke and cause engine failure
- Electrical system
Intermittent engine, trac control lights and 4WD lo light flashing when driving down road
- Engine · Fuel/propulsion system · Unknown or other
My 2013 toyota tundra truck ( 74,734 miles) suddenly had engine failure while driving down an incline at 48 mph. I lost power steering and power brakes. After eventually pulling the wheel with much effort and using the emergency brake I was able to get the truck off to the side of the road. I…
My 2013 toyota tundra truck ( 74,734 miles) suddenly had engine failure while driving down an incline at 48 mph. I lost power steering and power brakes. After eventually pulling the wheel with much effort and using the emergency brake I was able to get the truck off to the side of the road. I turned the key and the engine started right away and I was able to drive again but only at a reduced speed of 40 mph or less ( it's called "limp" mode) my mechanic diagnosed it as a secondary air injection pump failure. Upon investigating this on several tundra owner message boards, I find that this IS a common failure tundra trucks at around 75000 miles. The toyota dealer confirmed that this has been a common problem and looked up my vin number to see if it qualified for a warranty extension program that toyota has offered for some 2012 and 2013 tundra trucks. Unfortunately my vin number was a few numbers beyond the extension program. had my wife been driving the truck when this happened, I am not so sure she would have had the strength to safely bring the truck under control and get it off the road with no power steering or power brakes. I want toyota to extend the warranty on this faulty part before someone gets into a serious accident. They have obviously admitted there IS a problem with this part and should extend it to all toyota truck owners with this particular problem. Not just a select few. *tr
- Air bags · Air bags › Frontal › Driver clockspring/spiral cassette · Steering · Unknown or other
Horn does not work when a road hazard was presented attempted to utilize horn nothing happened when I took to toyota they said it IS the wiring harness from the airbag around the steering column and IS not covered under warranty and IS not a recall but when I look up online many people for years…
Horn does not work when a road hazard was presented attempted to utilize horn nothing happened when I took to toyota they said it IS the wiring harness from the airbag around the steering column and IS not covered under warranty and IS not a recall but when I look up online many people for years have had issues with this problem was sent away driving my vehicle which I believe to be unsafe as if I don't have airbags or a horn not sure that my vehicle IS legal to be driven at this point I feel that since these are safety issues they should be recalls as it has happened to many people I have only owned my truck since december I picked it up at the very end of december 2019. *tr
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Electrical overstress
The Office of Defects Investigation (ODI) opened this investigation to determine if the failure of airbags to deploy during severe crashes, in certain vehicles, was the result of a safety related defect. During the investigation a complex failure was studied that can result in non-deployment of subject vehicle air…
The Office of Defects Investigation (ODI) opened this investigation to determine if the failure of airbags to deploy during severe crashes, in certain vehicles, was the result of a safety related defect. During the investigation a complex failure was studied that can result in non-deployment of subject vehicle air bags and other restraint system devices in severe crash events. The subject vehicles may be equipped with an airbag control unit (ACU) for the supplemental restraint system (SRS) Electronic Control Unit (ECU) manufactured by ZF-TRW. The ECU receives signals from crash sensors mounted in the vehicle and deploys the vehicle air bags and seat belt pretensioners in accordance with manufacturer design specifications. The ECU in the subject vehicles contains a model DS84 application-specific integrated circuit (ASIC) which controls the communication of the crash sensor signal, firing commands (i.e., when to deploy the airbag(s) and/or pretensioners), and fault information (e.g., diagnostic trouble codes). In September 2016, FCA announced recall 16V-668 for certain model year (MY) 2010 to 2014 Chrysler, Dodge and Jeep products manufactured with the subject ZF-TRW ACU. In this recall, FCA discussed an EOS condition that resulted in a failure of the subject DS84 ASIC, which caused air bag non-deployment. FCA noted that the defect condition had only been observed in vehicles equipped with sensor harnessing routed across the front of the vehicle. Other FCA vehicles that also used the subject ACU, but were not equipped with cross-car harnessing, had not experienced EOS failures, despite similar time in service. During the course of this investigation, ODI sent two separate Information Request (IR) letters to six vehicle manufactures (including FCA, Hyundai, Honda, Kia, Mitsubishi, and Toyota) and one IR letter to ZF-TRW. These IR letters resulted in ODI receiving comprehensive data from these manufacturers and suppliers. Studies of this data found that the DS84 ASIC does not have sufficient protection against negative electrical transients or electrical overstress (“EOS”) that can be generated in certain severe crashes. An electrical transient occurs when the electrical power supplied to a circuit changes momentarily over a short duration of time. In these severe crash cases, the crash sensors and other powered wiring can be damaged and short circuited so as to create a negative electrical transient of sufficient intensity and duration (that are outside the vehicle manufacturer's specification) to damage the ASIC before the restraint device deployment signal is received by the SRS ECU. This damaged signal can lead to incomplete or nondeployment of the air bags and/or pretensioners. Airbag non-deployment and/or lack of pretensioner operation can increase the risk or severity of injury in a crash.A total of 8 fatalities and 14 injuries were associated with known EOS events. The common element in all investigated manufacturers vehicles is the SRS ECU containing a DS84 ASIC manufactured by ZF-TRW. The risk associated with the ASIC is equally shared among all OEMS involved in the investigation. The actual real-world risk can be mitigated by other factors which were assessed by ODI during this investigation. The first mitigating factor involves protections built into the ACU design which protect the DS84 ASIC from damage. There are multiple strategies and levels of protection employed by different OEMs that provide effective EOS mitigation. The two most common strategies at the ACU level are circuit protection diodes on the remote senor signal lines, and current limiting resistors that protect critical components. The second mitigating factor is found at the vehicle level and involves the location and routing of the wires leading from the crash sensors to the SRS ECU. If the wires are well protected in a crash and are not routed with other power wires carrying large currents, the risk for an EOS event is significantly reduced or eliminated. These design specific factors combine to produce a spectrum of risk for the vehicles equipped with ACUs using the DS84 ASIC. Given the many of years of field exposure, it is possible to divide the subject population into two groups; vehicles which have experienced EOS events, and vehicles which have not experienced EOS field events. Four of the six OEMs involved in this investigation have experienced EOS field events on at least one of their models equipped with a DS84 ASIC. All vehicle models (including the Toyota models identified in the Failure Report Summary of the opening resume for this investigation) with field events have been recalled. In an abundance of caution, ODI kept this investigation open five years to monitor field performance and did not identify any field events on vehicles not included in existing safety recalls. Given the spectrum of risk identified in this investigation and that all vehicles with a demonstrated unreasonable risk have been recalled, ODI is closing this investigation. ODI is closing this investigation with the following manufacturer safety recalls: 16V-668, 18E-043, 18V-137, 18V-363, and 20V-024. With the recall actions taken by the subject vehicle and equipment manufacturers, this investigation is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exists on other model or model year vehicles outside of the recall scopes. The agency reserves the right to take further action if warranted by the circumstances.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244115TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10224108TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10220183TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10208995TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10204571TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10203532TT: Some customers may encounter Bluetooth connectivity concerns such as: ?Difficulty to pair the phone. ?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
- 10197476Replacement vin plates.
- 10197473Product general information.
- 10197431ECM update. LSC expired.
- 10197430Number and identification of covered vehicles. LSC expired.
- 10190460Toyota Safety Recall and Service Campaign - Technician Certification Requirements
- 10190453TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
Every Toyota Tundra model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.