2014 Toyota Tundra
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Tundra › 2014
These records cover every 2014 Toyota Tundra. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
5 recalls name the 2014 Toyota Tundra. Newest first.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain JTEKT power steering gear assembly service parts for 2007-2021 Tundra and 2008-2022 Sequoia, part numbers 44250-0C160, 44250-0C131, 44250-0C170, and 11250-0C121. The power steering gear assembly may have been manufactured incorrectly, which can result in an oil leak.
Risk and remedy
Risk
An oil leak may cause a sudden loss of power steering assist, increasing the risk of a crash.
Remedy
Dealers will inspect and replace the power steering gear assembly, free of charge. Owner notification letters were mailed on February 17, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 21TH01.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2008-2022 Sequoia and 2007-2021 Tundra vehicles. The power steering gear assembly may have been manufactured incorrectly, which can result in an oil leak.
Risk and remedy
Risk
An oil leak may cause a sudden loss of power steering assist, increasing the risk of a crash.
Remedy
Dealers will inspect and replace the power steering gear assembly as necessary, free of charge. Owner notification letters were mailed on January 21, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are 21TB10 and 21TA10.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2013-2017 Toyota Tundra and Sequoia vehicles accessorized with Southeast Toyota accessory 20-inch Rockstar wheels installed by Southeast Toyota or a Southeast Toyota dealer. The Rockstar wheels were installed with lugnuts that may crack and detach.
Risk and remedy
Risk
Lugnuts that crack and detach may cause the wheels to separate from the vehicle, increasing the risk of a crash.
Remedy
SET will notify owners, and dealers will install new replacement lugnuts, free of charge. The recall began June 23, 2017. Owners may contact SET customer service at 1-866-405-4226. SET's number for this recall is SET17A.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2014 Toyota Tundra CrewMax and Double Cab vehicles manufactured July 29, 2013, to August 22, 2014. Due to the possible misinstallation of the upper tab of the B-pillar interior trim, the Curtain-Shield Air Bags (CSA) may not deploy properly in the event of a crash.
Risk and remedy
Risk
If the Curtain-Shield Air Bags (CSA) do not deploy properly there is an increased risk of occupant injury during a crash.
Remedy
Toyota will notify owners, and dealers will inspect the B-pillar interior trim installation and will replace it if it is not installed correctly, free of charge. Owners may contact Toyota customer service at 1-800-331-4331.
Gulf States Toyota, Inc. (GST) is recalling certain model year 2013-2014 Toyota Tundra vehicles modified by GST as part of certain vehicle packages to be equipped with a combination of non-Toyota-brand 20-inch alloy wheels and chrome plated lug nuts. The coating on the lug nuts may give, causing the lug nuts to loosen or the wheel studs to fracture.
Risk and remedy
Risk
If the lug nuts loosen, or the wheel studs fracture, the wheel may separate from the vehicle, increasing the risk of a crash.
Remedy
GST will notify owners, and dealers will replace 20 lug nuts and torque them to specification, free of charge. The recall began in August 2014. Owners may contact GST customer service at 1-800-444-1074.
Owner complaints
93 complaints2 involved a crash1 involved a fire3 injuries
What owners report most
Latest complaints
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2014 Toyota Tundra. It was discovered that there was a mileage discrepancy. The vehicle was a private sale. At the time of the purchase, the mileage was 93,000. While attempting to trade the vehicle to a dealer, it was discovered in a Carfax Report that the mileage was over 300,000.
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2014 Toyota Tundra through a private sale. It was discovered that there was a mileage discrepancy. At the time of purchase, the vehicle mileage was 171,837. After obtaining a Carfax report, the contact discovered that the vehicle mileage was 186,000.
- Structure › Body › Hood
Airflow into the hood bulge strained the thinly built brackets causing them to break and subsequently causes the bulge to pop loose when driving.
- Engine and engine cooling
I purchased the truck thinking it had 80k miles it’s was misrepresented by the dealer I got it from in reality it should’ve been 280k miles. I don’t have the money to go after them as I spent it on the truck and timing chains as well as some other repairs. They will likely flee the country if they find out I was to go after them anyway
- Fuel system, gasoline
The contact owns a 2014 Toyota Tundra. The contact observed that an object was hanging down from the rear wheel well on the driver's side. The contact inspected and saw that the rear fuel tank strap had rusted and detached from the frame. The contact stated that part of the fuel tank was resting on…
The contact owns a 2014 Toyota Tundra. The contact observed that an object was hanging down from the rear wheel well on the driver's side. The contact inspected and saw that the rear fuel tank strap had rusted and detached from the frame. The contact stated that part of the fuel tank was resting on the skid plate. The contact had not taken the vehicle to a dealer or independent mechanic. The vehicle was not diagnosed or repaired. The manufacturer was not informed of the failure. The failure mileage was approximately 103,000.
- Electrical system · Steering · Wheels
My Tundra 2014 have vibration during light to hard braking. The vibration can felt in any combination, Steering wheel, seat, and entire vehicle. To can fell over a large or short rang of speed. The truck have a new rotors and New break pads (I change twice in 2 years helps a little bit but not…
My Tundra 2014 have vibration during light to hard braking. The vibration can felt in any combination, Steering wheel, seat, and entire vehicle. To can fell over a large or short rang of speed. The truck have a new rotors and New break pads (I change twice in 2 years helps a little bit but not fix the problem). I purchased the truck on 2023 and come with this issue, i tried to many shops and no one can find the problem until i see some complaints for the same problem, this maybe to late, i hope some cam help me please.
- Back over prevention › Rearview system braking · Unknown or other
purchased a 2014 toyota tundra on Facebook Marketplace from an individual on 4/27/2025 The seller represented the mileage as 88,461 miles, but after reviewing the vehicle history through Carfax/AutoCheck, I discovered that the actual mileage is significantly higher. The odometer appears to have…
purchased a 2014 toyota tundra on Facebook Marketplace from an individual on 4/27/2025 The seller represented the mileage as 88,461 miles, but after reviewing the vehicle history through Carfax/AutoCheck, I discovered that the actual mileage is significantly higher. The odometer appears to have been rolled back. I have filed a police report regarding this fraud and am submitting this complaint to report the tampering. I have supporting documentation including the listing, communication with the seller, and the vehicle history report.
- Structure › Body
Not sure how long the paint has been peeling on the truck, but the truck is immaculate except for the peeling paint. The paint was peeling at time of purchase, and we were told by dealer that it was covered as Toyota had issues with their white paint. After purchase, we were told that Toyota…
Not sure how long the paint has been peeling on the truck, but the truck is immaculate except for the peeling paint. The paint was peeling at time of purchase, and we were told by dealer that it was covered as Toyota had issues with their white paint. After purchase, we were told that Toyota wouldn't cover it. The peeling paint is not localized to one spot but peeling on every panel. It is peeling off the top and all sides. The vehicle has always been stored under cover. We have never had a vehicle peel as this and have inquired with a few body shops that relate it to manufacturer defect and that the entire truck will have to be stripped and repainted to correct the problem. There were several models of Toyotas during 2014 that had the white paint related issues that Toyota corrected. Not sure, why the white paint on the Tundra’s wasn't included as it clearly has the same problems. After internet searching and speaking with dealers, this is a widespread issue. The truck is available for inspection. Peeling paint can pose several safety issues, especially with children. It also will cause premature aging of the vehicle making it more susceptible to rust and deterioration. The problem has been inspected and confirmed with a dealer.
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2014 Toyota Tundra. The contact stated that while comparing the real Carfax to the fake Carfax provided by the private seller, it was discovered that there was a mileage discrepancy. The private seller also provided a fake vehicle title, which allowed the…
Odometer Fraud. The contact purchased a 2014 Toyota Tundra. The contact stated that while comparing the real Carfax to the fake Carfax provided by the private seller, it was discovered that there was a mileage discrepancy. The private seller also provided a fake vehicle title, which allowed the vehicle to be registered with the Department of Motor Vehicles. Additionally, the original seller of the vehicle confirmed the mileage discrepancy. The vehicle was a private sale. At the time of purchase and registration, the vehicle mileage was 111,000, but it was later discovered that the mileage was 230,000.
- Tires
The sidewall of my tire completely blew out on a flat, clear road. Leaving my neighborhood, I heard a questionable sound that I thought may be ice build up on my mudflap rubbing against the tire. I continued to monitor my suspicion, as it was hard to tell whether there was actually a sound, or if…
The sidewall of my tire completely blew out on a flat, clear road. Leaving my neighborhood, I heard a questionable sound that I thought may be ice build up on my mudflap rubbing against the tire. I continued to monitor my suspicion, as it was hard to tell whether there was actually a sound, or if it was in my head. Turning out of my neighborhood, I continued listening for anything suspicious. After feeling like I was in the clear, I brought the truck up to 45-50mph. Suddenly, the truck began bouncing like crazy, and I was able to manage pulling off to the side of the road. The shoulder was only a couple feet wide, followed by a steep hill, so my truck was sticking out into the road quite far, and it was night time. I sprung into action as quickly as possible to minimize risk as I went to change the tire and replace with the spare. Since it was night time, and the road only had one lane in each direction, there were at least 3 times that my car / myself were almost rammed into, or the car approaching me wasn't able to see cars approaching from the other direction, and almost caused a head on collision. There hasn't been an official inspection of the tire yet. There were no warning lamps prior to the failure. The only symptoms of the problem were a suspected sound that may or may not have actually been there. Tire size: 275-55R-20
- Structure › Body
I bought my 2014 Toyota Tundra in March 2014, with no chips or peeling paint. Fast-forward a couple of months, the paint around the top side of the windshield is chipping and peeling. Living in a state that gets snow & ice, I am concerned about the potential for rust. Toyota is aware of the…
I bought my 2014 Toyota Tundra in March 2014, with no chips or peeling paint. Fast-forward a couple of months, the paint around the top side of the windshield is chipping and peeling. Living in a state that gets snow & ice, I am concerned about the potential for rust. Toyota is aware of the issue with their Super White paint with other models (Service Bulletin 23TE08), such as the following: 2008–2009 Lexus GX 470 2008–2017 Toyota Avalon 2008–2017 Toyota Camry 2008–2017 Toyota Camry Hybrid 2008–2017 Toyota RAV4 2009–2018 Toyota Corolla 2010–2015 Toyota 4Runner 2011–2015 Scion xB 2012–2015 Scion iQ It is nonsensical to omit other models using the same Super White paint from this recall.
- Electrical system
Door locks no longer automatically lock when vehicle reaches forward driving speed
- Structure › Body
Found Truck bed floor rust corrosion in the bed of 2014 tundra. Bed has localized corrosion and rust perforation in specific areas on the top side of the bed. Bed assembly does not appear to have been properly sealed using hemming and sealing procedures outlined in CRIB bulletin:163 sealing…
Found Truck bed floor rust corrosion in the bed of 2014 tundra. Bed has localized corrosion and rust perforation in specific areas on the top side of the bed. Bed assembly does not appear to have been properly sealed using hemming and sealing procedures outlined in CRIB bulletin:163 sealing Hem-flanges and body seams. The truck bed underside is rust free except where the bed sections were welded and sealed together. Truck is garage kept and has been undercoated with fluid film annually since I purchased in 2017. Truck only has 45,800 miles on it. Rust is forming in between the seems and spreading under the bed supports and around the bolts that secure the bed to the truck frame. I am concerned that the bed may become loose and fall off while driving down the highway if not replaced or repaired properly. Toyota had a TSB 0101-12 for older model tundras years 2007-2011. The service manager at my local Toyota dealership acknowledges the issue and agrees that the issue is unacceptable. Dealer also stated that this issue is common on generation 3 Tundra vehicles. I am currently working with Toyota Customer care to resolve this safety concern. Local dealer will not authorize repair due to vehicle age even though issue is a manufacturing defect.
- Seats
The driver’s seat heat connection appeared to have an electrical failure and appears burned.
- Fuel/propulsion system
There is fuel leaking from above the fuel tank. This is an immediate hazard in my book. The tank is half full at this point in time. I believe it is leaking from the fuel pressure switching valve. No warning lights are illuminated at this time. I will confirm that this weekend when I remove the…
There is fuel leaking from above the fuel tank. This is an immediate hazard in my book. The tank is half full at this point in time. I believe it is leaking from the fuel pressure switching valve. No warning lights are illuminated at this time. I will confirm that this weekend when I remove the fuel tank to inspect. I have a photo of the leak but it is too large to upload. I will gladly email it to you. I am an ASE certified technician.
- Steering
The contact owns a 2014 Toyota Tundra. The contact stated that while driving at an undisclosed speed and making a left turn, the maintenance required warning light was illuminated. The contact then stated that after he made it to his destination, he checked under the hood of the vehicle and noticed…
The contact owns a 2014 Toyota Tundra. The contact stated that while driving at an undisclosed speed and making a left turn, the maintenance required warning light was illuminated. The contact then stated that after he made it to his destination, he checked under the hood of the vehicle and noticed that the power steering pump was leaking. The vehicle was taken to the dealer where it was diagnosed that the front power coolant line and an unknown gasket needed to be replaced. The vehicle was not repaired. The manufacture was notified of the failure and the contact was informed that the VIN was not under recall. The failure mileage was approximately 40,000. The consumer stated there was a recall but was not covered at the dealer due to the power coolant line not being covered. The vehicle was repaired at Autobody shop at the owners expense.
- Unknown or other
While driving my rear sliding window just dropped about a foot. Luckily it didn't shatter or hurt anyone. When rear panel was accessed found pulley cable that holds window up had broken off its plastic retainer in the window regulator.
- Power train · Service brakes
First the break keeps broken. I was told the master cylinder for the break needs to be replaced. This is after I spend thousands to work on breaks at dealer. Second, the window does not close. I thought it might be caused by a broken breaker BUT, none of the breaker is bad. Thirdly, the most…
First the break keeps broken. I was told the master cylinder for the break needs to be replaced. This is after I spend thousands to work on breaks at dealer. Second, the window does not close. I thought it might be caused by a broken breaker BUT, none of the breaker is bad. Thirdly, the most frustrated thing is the transmission fails to work. The truck is dead on the street. I sent the truck to dealer to replace the transmission to a new one. After it is done. I drove it on the street and just a few days later, the transmission is failed again and Gear shifting stick failed to work as soon as it is out of dealer parking lot. Dealer repair department told me I need to put money out to buy another transmission. They said transmission oil line is broken, and it caused transmission not to be covered by any wanrrenty. .
- Air bags
Randomly the air bag light comes on saying that their is an malfunction in one of the air bags. The dashboard light comes on more frequently when the weather is hot out side. Can’t remember the date when it started but it’s been happening a lot and Toyota said their are no recalls or issues with that are known and I would need to pay which is costly.
- Structure › Body
The grill cowling has plastic pins that attach to hood. Grill cowling is the part that sets above actual grill via bolts, and plastic pins. The grill cowling is constantly popping out , plastic pins not holding. Have read on line that others are having this problem. If grill cowling becomes loose…
The grill cowling has plastic pins that attach to hood. Grill cowling is the part that sets above actual grill via bolts, and plastic pins. The grill cowling is constantly popping out , plastic pins not holding. Have read on line that others are having this problem. If grill cowling becomes loose while traveling, and breaks or snaps off it will be airborne could cause vehicle crashes. Has not been inspected by manufacture, police, insurance reps or others. Is available for inspection.
- Electrical system · Structure › Body
In the course of cleaning my vehicle, I noticed corrosion on edge of door sill (emanating from under inside rubber door seal) of my 2014 Toyota Tundra on June 13, 2021. After removing the plastic scuff plate and rubber door seal, it was apparent that openings from the underside of the vehicle into…
In the course of cleaning my vehicle, I noticed corrosion on edge of door sill (emanating from under inside rubber door seal) of my 2014 Toyota Tundra on June 13, 2021. After removing the plastic scuff plate and rubber door seal, it was apparent that openings from the underside of the vehicle into the cabin are present from the design/manufacturing process - these opening are not sealed. The openings are not a result of corrosion but rather are associated with the geometry of the floor pan at the floor pan to rocker pinch weld - it is not a sealed surface. After removing the rubber seal I was able to look downward into the openings and see daylight from the underside of the cabin. Electrical cabling is immediately adjacent to these openings beneath the plastic scuff plate. It was apparent that the openings permit water and salt infiltration into the cabin, and would appear to be the primary cause of corrosion and build up of salt residues in the cabin and door sill area. My first impression was the condition that I observed was a manufacturing defect. On reflection many questions came to mind including: was the infiltration of water, salt and potentially exhaust through the openings in the floor pan going to have safety consequences - would the deterioration of the body structure as a result of corrosion have consequences in the event of a crash, or would the potential infiltration of exhaust gases affect the safety of cabin occupants? In following up the dealer and manufacturer over the last week, no resolution has been found . Owing to the age I was advised that there was no warranty coverage. The dealer reportedly inspected other Tundras and the design/manufacturing conditions (ie. opening in the floor pan) were the same as I had observed. It was only through my own initiative that I identified a Manufacturer Communication (NHTSA ID 10173991) that shed some light on the issue.
- Wheels › Lugs/nuts/bolts/studs
TL* the contact owns a 2014 toyota tundra. The contact stated that the vehicle was taken to ira toyota of orleans (16 o'connor rd, orleans, ma 02653, (774) 801-7100) where it was diagnosed with needing the lug nuts to be replaced. The vehicle was not repaired. Upon investigation, the contact…
TL* the contact owns a 2014 toyota tundra. The contact stated that the vehicle was taken to ira toyota of orleans (16 o'connor rd, orleans, ma 02653, (774) 801-7100) where it was diagnosed with needing the lug nuts to be replaced. The vehicle was not repaired. Upon investigation, the contact associated the failure with nhtsa campaign number: 17v311000 (wheels) however, the vin was not included. The manufacturer was informed of the failure. The failure mileage was approximately 163,000.
- Air bags
I was driving down a dirt road and I hit a pothole going around 5TO8 mph and my air driver side airbags deployed. Both side curtains steering and below the wheel deployed
- Structure › Body
Hood bulge keeps popping up out of place when driving on the highway at speeds of 65/70 or when it's windy outside.
- Steering
Gloss coating on steering wheel has cracked in multiple areas, handling of the vehicle has become uncomfortable. Most recent crack IS about 2MM wide and goes all around the wooden gloss part of the steering wheel and I feel that if this continues my steering wheel will become unsafe to drive due to the unevenness and possibly cause some pieces to fall off my steering wheel.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Electrical overstress
The Office of Defects Investigation (ODI) opened this investigation to determine if the failure of airbags to deploy during severe crashes, in certain vehicles, was the result of a safety related defect. During the investigation a complex failure was studied that can result in non-deployment of subject vehicle air…
The Office of Defects Investigation (ODI) opened this investigation to determine if the failure of airbags to deploy during severe crashes, in certain vehicles, was the result of a safety related defect. During the investigation a complex failure was studied that can result in non-deployment of subject vehicle air bags and other restraint system devices in severe crash events. The subject vehicles may be equipped with an airbag control unit (ACU) for the supplemental restraint system (SRS) Electronic Control Unit (ECU) manufactured by ZF-TRW. The ECU receives signals from crash sensors mounted in the vehicle and deploys the vehicle air bags and seat belt pretensioners in accordance with manufacturer design specifications. The ECU in the subject vehicles contains a model DS84 application-specific integrated circuit (ASIC) which controls the communication of the crash sensor signal, firing commands (i.e., when to deploy the airbag(s) and/or pretensioners), and fault information (e.g., diagnostic trouble codes). In September 2016, FCA announced recall 16V-668 for certain model year (MY) 2010 to 2014 Chrysler, Dodge and Jeep products manufactured with the subject ZF-TRW ACU. In this recall, FCA discussed an EOS condition that resulted in a failure of the subject DS84 ASIC, which caused air bag non-deployment. FCA noted that the defect condition had only been observed in vehicles equipped with sensor harnessing routed across the front of the vehicle. Other FCA vehicles that also used the subject ACU, but were not equipped with cross-car harnessing, had not experienced EOS failures, despite similar time in service. During the course of this investigation, ODI sent two separate Information Request (IR) letters to six vehicle manufactures (including FCA, Hyundai, Honda, Kia, Mitsubishi, and Toyota) and one IR letter to ZF-TRW. These IR letters resulted in ODI receiving comprehensive data from these manufacturers and suppliers. Studies of this data found that the DS84 ASIC does not have sufficient protection against negative electrical transients or electrical overstress (“EOS”) that can be generated in certain severe crashes. An electrical transient occurs when the electrical power supplied to a circuit changes momentarily over a short duration of time. In these severe crash cases, the crash sensors and other powered wiring can be damaged and short circuited so as to create a negative electrical transient of sufficient intensity and duration (that are outside the vehicle manufacturer's specification) to damage the ASIC before the restraint device deployment signal is received by the SRS ECU. This damaged signal can lead to incomplete or nondeployment of the air bags and/or pretensioners. Airbag non-deployment and/or lack of pretensioner operation can increase the risk or severity of injury in a crash.A total of 8 fatalities and 14 injuries were associated with known EOS events. The common element in all investigated manufacturers vehicles is the SRS ECU containing a DS84 ASIC manufactured by ZF-TRW. The risk associated with the ASIC is equally shared among all OEMS involved in the investigation. The actual real-world risk can be mitigated by other factors which were assessed by ODI during this investigation. The first mitigating factor involves protections built into the ACU design which protect the DS84 ASIC from damage. There are multiple strategies and levels of protection employed by different OEMs that provide effective EOS mitigation. The two most common strategies at the ACU level are circuit protection diodes on the remote senor signal lines, and current limiting resistors that protect critical components. The second mitigating factor is found at the vehicle level and involves the location and routing of the wires leading from the crash sensors to the SRS ECU. If the wires are well protected in a crash and are not routed with other power wires carrying large currents, the risk for an EOS event is significantly reduced or eliminated. These design specific factors combine to produce a spectrum of risk for the vehicles equipped with ACUs using the DS84 ASIC. Given the many of years of field exposure, it is possible to divide the subject population into two groups; vehicles which have experienced EOS events, and vehicles which have not experienced EOS field events. Four of the six OEMs involved in this investigation have experienced EOS field events on at least one of their models equipped with a DS84 ASIC. All vehicle models (including the Toyota models identified in the Failure Report Summary of the opening resume for this investigation) with field events have been recalled. In an abundance of caution, ODI kept this investigation open five years to monitor field performance and did not identify any field events on vehicles not included in existing safety recalls. Given the spectrum of risk identified in this investigation and that all vehicles with a demonstrated unreasonable risk have been recalled, ODI is closing this investigation. ODI is closing this investigation with the following manufacturer safety recalls: 16V-668, 18E-043, 18V-137, 18V-363, and 20V-024. With the recall actions taken by the subject vehicle and equipment manufacturers, this investigation is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exists on other model or model year vehicles outside of the recall scopes. The agency reserves the right to take further action if warranted by the circumstances.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244115TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10224108TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10220183TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10208995TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10207963TSB This Service Bulletin includes guidelines meant to help determine whether to repair or replace a wire harness assembly based on damage type. This Service Bulletin should be used in conjunction with the applicable model and model year Electronic Wiring Diagram (EWD) and/or Repair Manual.
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10204571TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10203532TT: Some customers may encounter Bluetooth connectivity concerns such as: ?Difficulty to pair the phone. ?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
- 10198150Updates to the 2014-2021 toyota universal flat rate manual
- 10197476Replacement vin plates.
- 10197473Product general information.
- 10190460Toyota Safety Recall and Service Campaign - Technician Certification Requirements
- 10190453TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
Every Toyota Tundra model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.