2018 Ford F-150
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Ford › F-150 › 2018
These records cover every 2018 Ford F-150. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
19 recalls name the 2018 Ford F-150. Newest first.
Ford Motor Company (Ford) is recalling certain 2018-2020 F-150 vehicles previously repaired incorrectly under recall number 20V097. When the headlight switch is turned from "Autolamps" to "Headlamps On," the Daytime Running Lamps (DRLs) may remain fully bright instead of dimming to parking lamps as intended. As such, these vehicles fail to comply with the…
Risk and remedy
Risk
Daytime Running Lamps that do not dim may reduce the visibility of other drivers, increasing the risk of a crash.
Remedy
,Dealers will reprogram the body control module software, free of charge. Owner notification letters were mailed July 17, 2026. Owners may contact customer service at 1-866-436-7332. Ford's number for this recall is 26C28. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on NHTSA.gov on July 6, 2026.
Ford Motor Company (Ford) is recalling certain 2018 F-150 vehicles previously repaired incorrectly under recall number 17V669. Quickly moving the shift lever from Park to Drive may cause a loss of gear indication on the instrument cluster display and a momentary selection of an unintended gear, such as Reverse or Neutral.
Risk and remedy
Risk
Unintended gear selection may cause the vehicle to move in an unexpected direction, increasing the risk of crash or injury.
Remedy
Dealers will update the powertrain control module software, free of charge. Owner notification letters were mailed July 9, 2026. Owners may contact customer service at 1-866-436-7332. Ford's number for this recall is 26S42. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on NHTSA.gov on July 6, 2026.
Ford Motor Company (Ford) is recalling certain 2017-2018 F-150, Expedition, and Lincoln Navigator vehicles. The brake master cylinder may allow brake fluid to leak from the front wheel circuit into the brake booster.
Risk and remedy
Risk
A brake fluid leak can cause reduced brake function and extend the distance required to stop, increasing the risk of a crash.
Remedy
Dealers will replace the brake master cylinder. If the master cylinder is leaking, the brake booster will also be replaced. Repairs will be performed free of charge. Owner notification letters were mailed September 25, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S37. This recall is an expansion of NHTSA recall number 22V-150.
Ford Motor Company (Ford) is recalling certain 2020-2025 Explorer, Lincoln Aviator, 2020-2024 Escape, Lincoln Corsair, 2018-2024 F-150, Expedition and Lincoln Navigator vehicles. The air bag warning label may be missing from the dashboard. As such, these vehicles fail to comply with the requirement Federal Motor Vehicle Safety Standard number 208…
Risk and remedy
Risk
Without a label that shows the proper restraint usage guidelines, the occupants may have an increased risk of injury in the event of a crash.
Remedy
Ford will mail owners the warning labels, free of charge. Owner notification letters were mailed December 19, 2024. Owners may call Ford customer service at 1-866-436-7332. Ford's number for this recall is 24C39.
Ford Motor Company (Ford) is recalling certain 2016-2017 Ford Expedition, Lincoln Navigator, and 2016-2018 F-150 vehicles equipped with 3.5L Ecoboost engines. The brake master cylinder may allow brake fluid to leak from the front wheel circuit into the brake booster.
Risk and remedy
Risk
A loss of brake fluid may result in a change in brake pedal travel, increased pedal effort and reduced front brake function, requiring greater effort and distance to stop the vehicle. These conditions can increase the risk of a crash.
Remedy
Dealers will replace the brake master cylinder. If the master cylinder is leaking, the brake booster will also be replaced. Repairs will be performed free of charge. An interim owner notification letter notifying customers of the safety defect were mailed on April 29, 2022. Owner notification letters were mailed April 29, 2022. This recall is an expansion of NHTSA recall number 20V-332. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S11.
Ford Motor Company (Ford) is recalling certain 2018 F-150 vehicles with manual and power release tailgates. The tailgate latches may unlatch unexpectedly while driving.
Risk and remedy
Risk
Unexpected tailgate opening may allow unrestrained cargo to fall out of the truck bed and become a road hazard, increasing the risk of a crash.
Remedy
Dealers will replace the left-hand and right-hand tailgate latches, free of charge. An interim notification letter was mailed January 31, 2022. Owner notification letters were mailed on May 31, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S53.
Tenneco Automotive (DRiV) is recalling certain MOOG K500359 ball joints, for aftermarket installation on 2015-2018 Ford F-150 trucks. The ball joint may have a misaligned dust boot and may be missing alignment hole and installation warning tag, which may lead to improper alignment of the ball joint.
Risk and remedy
Risk
An incorrectly installed ball joint may cause the ball joint stud to break, which can compromise front wheel control, increasing the risk of a crash.
Remedy
DRiV will notify owners, and dealers will inspect, and if necessary replace the ball joint, free of charge. Owner letters were mailed May 5, 2021. Owners may contact Tenneco Automotive customer service at 1-877-489-6659.
Ford Motor Company (Ford) is recalling certain 2018 F-150, 2018-2020 F-250, F-350, and 2019 Escape vehicles equipped with Continental tires. On the affected vehicles, it is possible that one or more tires were cured for too long during tire production.
Risk and remedy
Risk
Over cured tires may develop a break in the sidewall, resulting in sudden air loss or belt edge separation which could lead to tread/belt loss. Either condition can cause a loss of vehicle control, increasing the risk of a crash.
Remedy
Ford will notify owners, and dealers will inspect the tires, and replace them as necessary, free of charge. The recall began on March 27, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S10.
Ford Motor Company (Ford) is recalling certain 2018-2020 F-150 trucks equipped with high series LED headlamps with Autolamp (On/Off) functionality. The Daytime Running Lamps (DRL) may remain activated instead of dimming to parking lamps when the Master Lighting Switch (MLS) is manually rotated from the "Autolamps" switch position to "Headlamps On." As…
Risk and remedy
Risk
DRL that cannot dim may reduce the visibility of other drivers, increasing the risk of a crash.
Remedy
Ford will notify owners, and dealers will reprogram the body control module, free of charge. The recall began March 10, 2020. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 20C03.
Ford Motor Company (Ford) is recalling certain 2018-2020 F-150 and 2019-2020 F-250, F-350, F-450, and F-550 Super Duty pickup trucks, and 2018-2019 Ford Explorer, 2019-2020 Expedition, and 2020 Escape vehicles equipped with driver and/or passenger's manual front seat back recliner mechanisms. Also included are certain 2020 Ford Explorer and Lincoln Aviator…
Risk and remedy
Risk
A seat back with an improperly assembled recliner mechanism may have reduced strength and may not adequately restrain an occupant in a crash, increasing the risk of injury.
Remedy
Ford will notify owners, and Ford and Lincoln dealers will inspect the seat structure and replace them, as necessary, free of charge. The recall began October 21, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19C07.
Ford Motor Company (Ford) is recalling certain 2015-2019 Ford F-150 and 2017-2019 Ford F-250 Super Duty, F-350 Super Duty, F-450 Super Duty, and F-550 Super Duty pick-up trucks equipped with an engine block heater and previously remedied under recall 18V894. During the previous repair, the block heater cable's splice connector may have been damaged.
Risk and remedy
Risk
A damaged cable could cause a resistive short, increasing the risk of overheated or melted wiring, increasing the risk of a fire.
Remedy
Ford will notify owners, and dealers will disable the engine block heater from being used. When replacement cables become available, a second notice will be mailed and dealers will replace the engine block heater cord, free of charge. The recall began May 31, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S11.
Ford Motor Company (Ford) is recalling certain 2015-2019 Ford F-150 and 2017-2019 Ford F-250 Super Duty, F-350 Super Duty, F-450 Super Duty, and F-550 Super Duty pick-up trucks equipped with an engine block heater. Water and contaminants may get into the block heater cable's splice connector causing corrosion and damage.
Risk and remedy
Risk
When the heater is plugged in, prolonged corrosion could cause a resistive short, increasing the risk of overheated or melted wiring which can increase the risk of a fire.
Remedy
Ford will notify owners, and dealers will disable the block heater cable, free of charge. Once parts are available, Dealers will replace the engine block heater cable, free of charge. The recall began June 3, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 18S45.
Ford Motor Company (Ford) is recalling certain 2015-2018 Ford F-150 Regular Cab and SuperCrew Cab vehicles. If a front seat belt pretensioner deploys as the result of a crash, the sparks may ignite materials such as carpeting or insulation within the B-pillar area.
Risk and remedy
Risk
A vehicle fire could result if materials ignite inside the vehicle.
Remedy
Ford will notify owners, and dealers will remove the B-pillar insulation material and wiring harness tape, and install heat resistant tape, free of charge. The recall began September 28, 2018. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 18S27.
Ford Motor Company (Ford) is recalling certain 2018 Ford Expedition, F-150, and Lincoln Navigator vehicles equipped with 3.5L GTDI V6 engines. These vehicles have high pressure fuel pump assemblies with welds that can fracture, which may cause an oil or fuel leak.
Risk and remedy
Risk
A fuel leak in the presence of an ignition source may increase the risk of a fire.
Remedy
Ford will notify owners, and dealers will replace the high pressure fuel pump and associated components, free of charge. The recall began July 17, 2018. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 18S17.
Ford Motor Company (Ford) is recalling certain 2017-2018 Ford F-150 and 2018 Ford Expedition and Mustang and Lincoln Navigator vehicles equipped with 10-speed automatic transmissions. A roll pin may not have been installed in the transmission, potentially causing a loss of the "Park" function.
Risk and remedy
Risk
Despite the transmission shift lever being placed in 'Park' and the instrument panel display indicating 'Park,' the vehicle may roll away after it has been exited if the parking brake has not been applied, increasing the risk of injury or a crash.
Remedy
Ford will notify owners, and dealers will inspect the transmission to make sure it has the roll pin, installing one if it is missing, free of charge. The recall began on April 13, 2018. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 18S09.
Ford Motor Company (Ford) is recalling certain 2018 F-650 and F-750 vehicles equipped with 6-speed automatic transmissions and 2018 Ford F-150 and Expedition vehicles equipped with 10-speed automatic transmissions (excluding Expedition vehicles with a Rotary Gear Shift Dial on the console). The gear shift cable clip may not be properly seated, allowing…
Risk and remedy
Risk
If the gear shift cable clip becomes unseated or dislodged, the gear shift lever position may indicate that the transmission is in 'Park' when it may be in a different gear. Additionally, despite selecting 'Park', if the parking brake is not applied before the vehicle is exited, the vehicle may roll. Either scenario increases the risk of a crash.
Remedy
Ford will notify owners, and dealers will inspect the shift cable locking clip and properly seat it, if necessary, free of charge. The recall began on April 13, 2018. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for the recall is 18S10.
Ford Motor Company (Ford) is recalling certain 2018 F-150 vehicles equipped with a 3.3L engine, a 6-speed transmission and a column mounted shift lever. Quickly moving the shift lever from Park to Drive may cause a loss of gear indication on the instrument cluster display and a momentary selection of an unintended gear, such as Reverse or Neutral before…
Risk and remedy
Risk
Unidentified or unintended gear selection may cause the vehicle to move in a way that was not intended by the driver, increasing the risk of crash or injury.
Remedy
Ford will notify owners, and dealers will reprogram the powertrain control module, free of charge. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 17S35.
Ford Motor Company (Ford) is recalling certain 2018 F-150 vehicles equipped with 3.5L engines. The cylinder heads may have been machined without lubrication supply holes for the camshaft bearing journals.
Risk and remedy
Risk
Without a proper supply of lubrication, the engine will fail, causing a stall and increasing the risk of a crash.
Remedy
Ford is not aware of any affected vehicles outside of dealer control. Should owner contact subsequently be required, arrangements will be made to transport their vehicle to a Ford or Lincoln dealer to have the engine replaced.The recall began October 24, 2017. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 17S37.
Ford Motor Company (Ford) is recalling certain 2018 Ford F-150 Raptor Super Cab pick-up trucks not equipped with a moonroof. The structural roof braces may be missing rivets at the attachment of the roof rail, thereby reducing the structural integrity.
Risk and remedy
Risk
If the structural integrity is reduced, in the event of a rollover crash, there may be an increased risk of injury .
Remedy
Ford will notify owners, and dealers will install the rivets for the roof brace attachments, free of charge. The recall began October 17, 2017. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 17S29.
Owner complaints
2,327 complaints64 involved a crash33 involved a fire52 injuries3 deaths
What owners report most
Latest complaints
- Power train
The transmission has been replaced once covered under Fords extended warranty at 90,700 miles by the previous owner in 2022. Today the transmission has 82,000 miles on it and requires to be replace again. This 10r80 Transmission has a known issue of in early models from 2017-2020. I was stopped at…
The transmission has been replaced once covered under Fords extended warranty at 90,700 miles by the previous owner in 2022. Today the transmission has 82,000 miles on it and requires to be replace again. This 10r80 Transmission has a known issue of in early models from 2017-2020. I was stopped at a stopped at a 3-way stop, and began to pull out into the intersection to make a right. Half way through the turn the truck would not go into 2nd gear and felt like as if it was in neutral and I lost power for about 6-8 seconds. During this period, another truck coming from the left, stopped at a stop sign as well, honked impatiently and then decided to go, driving in front of me. Just then my truck slipped into gear and lurched forward almost colliding with the other truck. On top of that there was a bystander waiting to cross the street, on the other side of the crossing truck, who would have sustained serious injuries if I could have not been able to stop by truck in time. Later when it would not slip into gear a wrench light came on and the transmission was stuck in 6th gear even at a stop. This light only went away once the tuck was turned off then on and the truck shifted from 1st to 3rd gear under a heavier acceleration. I took it to the dealership the next day, and they confirmed the issue and quoted ~$9,900 to rebuild the transmission. Again, this had been done previously. The service advisor mentioned they have a lot of these transmission issues with the 10r80. I noticed a gear slip over the last few weeks and found out about this "known" but neglected issue by Ford, and they have only offered resetting the Adaptive Shift Strategy in the past.
- Engine · Power train
3 separate things recently happened. First the cam phasers went out, $4600. Second, only months later, the transmission went out, $7100. Third, it is throwing a p0420 and p0421 codes and the catalytic converts need replaced, at least $2000. All of this under 100k miles.
- Power train
I had a recall on my replacement transmission. Recall stated it may be missing a part. I had all the problems listed. It was replace 4 years ago. The dealer said i don't qualify for the recall. Their reason was i had more then 8k miles. That average is 2000 miles a year. My truck rolls back be shifting to neutral. Please help I
- Power train
Truck has inconsistent, erratic shifting. Transmission seems to get confused or lost for a second or two when accelerating from a stop which has been dangerous a few times due to almost being rear ended. Also has shifted from 10-1-9th gear at 60-70mph at least 10 times now leaving the 10th gear…
Truck has inconsistent, erratic shifting. Transmission seems to get confused or lost for a second or two when accelerating from a stop which has been dangerous a few times due to almost being rear ended. Also has shifted from 10-1-9th gear at 60-70mph at least 10 times now leaving the 10th gear unavailable and a wrench on the dashboard. Sometimes it is violent enough slamming back into gear that if roads were icy, loss of control could result. We’re having a baby in December and I wont feel safe with the child in the truck. According to many online forums, YouTube videos and talking to mechanics this is a known issue and more or less a manufacturer defect in the cdf drum that Ford should recall but wont unless its considered a safety issue, which it should be.
- Service brakes
The brake hydraulic system on my 2018 Ford F-150 failed. The vehicle rapidly lost brake fluid, the brake pedal began sinking, and there was no obvious external brake-fluid leak. An independent repair facility later replaced both the brake master cylinder and the power brake booster. I have the…
The brake hydraulic system on my 2018 Ford F-150 failed. The vehicle rapidly lost brake fluid, the brake pedal began sinking, and there was no obvious external brake-fluid leak. An independent repair facility later replaced both the brake master cylinder and the power brake booster. I have the repair invoice and service records available. I do not know whether the removed components were retained by the repair facility. This failure created a serious safety risk because the vehicle was losing brake fluid and braking ability could have been reduced or lost. I had to repeatedly add brake fluid because the reservoir level would drop again after only a short distance. The sinking brake pedal made the vehicle unsafe to continue driving normally. The problem was confirmed and repaired by an independent service center. The master cylinder and power brake booster were replaced, along with a brake-system flush. The symptoms are similar to those described in Ford Recall 25S37 / NHTSA Recall 25V-236, which involves certain 2017-2018 Ford F-150 vehicles where the master-cylinder rear seal can allow brake fluid to leak into the brake booster. My VIN is not currently included in that recall. The vehicle has not, to my knowledge, been inspected by Ford specifically for this failure. The independent repair facility performed the repair. I am requesting that NHTSA review whether this vehicle may represent the same or a similar defect occurring outside the current recall population. Before the original brake failure, I did not receive a brake-system warning lamp or message that alerted me to the rapid brake-fluid loss. The main symptoms were the brake-fluid reservoir repeatedly becoming very low and the brake pedal sinking. After the master cylinder and brake booster were replaced, a new warning began appearing stating “Park Brake Limited Function.” This warning was not present before the repair. The vehicle has been returned to the repair facility four times for this warning. T
- Fuel/propulsion system
Mandatory recall 24E12 reprogrammed the Powertrain Control Module (PCM) to stricter emissions monitoring standards. This caused the Check Engine light to appear within 24hrs showing code P0430. There were NO codes showing and the Check Engine light was not on before the recall was performed. Ford…
Mandatory recall 24E12 reprogrammed the Powertrain Control Module (PCM) to stricter emissions monitoring standards. This caused the Check Engine light to appear within 24hrs showing code P0430. There were NO codes showing and the Check Engine light was not on before the recall was performed. Ford is denying responsibility and charging me $2,500+ out of pocket to replace the converter. I feel like they a FORCING me to purchase parts because if I don't, my vehicle wont pass emissions tests and is un-drivable (legally). Ford case#: CXH0966043220H4B3 Apparently, this has happened to THOUSANDS of F150 owners and needs to be addressed ASAP!!!!!
- Engine
Excessive oil consumption of approximately 1 qt every 1000 miles. I am filing the oil to the acceptable level monthly.
- Power train
This vehicle is equipped with the 10 speed transmission that is know to have issues that Ford refuses to resolve. The shifting in my vehicle has become delayed and rough to the point that it is dangerous to drive. Ford says the only recourse is to have the transmission replaced or rebuilt which will cost several thousand dollars.
- Engine
The VVT Cam Phasers had a " consumer satisfaction program" that didnt include my VIN but included the year which was 2017-2021 3.5 ECOBOOST engine that mine has. The program has now expired and my truck has this exact issue. Not fixing the issue can cause engine failure. My truck has 47k miles on…
The VVT Cam Phasers had a " consumer satisfaction program" that didnt include my VIN but included the year which was 2017-2021 3.5 ECOBOOST engine that mine has. The program has now expired and my truck has this exact issue. Not fixing the issue can cause engine failure. My truck has 47k miles on it. I called Ford back in XXX to file a compliant and nothing happened. I took my truck to Germain Ford in [XXX] to get a diagnostic done October 5,2026 and they said it was the VVT cam phasers. I called Ford XXX again about the issue and they said my VIN wasn't included and there was nothing they could do. This is absolutely absurd they are ignoring an ongoing issue and they refuse to do anything about this. I will continue to fight until something is done. This repair is costing me $4400. This is where you can help. Please make them do the right thing and reimburse me and I'm sure so many others their money. Thank you, [XXX] [XXX] [XXX] [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Unknown or other
My F-150 previously experienced an unintended tailgate opening while the vehicle was being driven. I brought the vehicle to Sugar Loaf Ford on May 14, 2025, specifically because of this problem. According to my repair documentation from that visit, Sugar Loaf Ford performed extensive work…
My F-150 previously experienced an unintended tailgate opening while the vehicle was being driven. I brought the vehicle to Sugar Loaf Ford on May 14, 2025, specifically because of this problem. According to my repair documentation from that visit, Sugar Loaf Ford performed extensive work addressing the unintended tailgate-opening condition, including: •Installed a relay jumper harness •Installed a bypass harness •Installed a body-length harness •Replaced the tailgate switch •Reprogrammed the Body Control Module (BCM) •Changed BCM parameters Despite this extensive repair, the vehicle has now experienced another unintended tailgate opening while being driven. The recent incident resulted in the loss of property from the truck. Most significantly, a Remington Model 552 Speedmaster .22-caliber rifle with a 3x9 powered scope and its hard case were lost. Firearm identification: •Make: Remington •Model: 552 Speedmaster •Caliber: .22 •Serial Number: 1443879 Upon parking the vehicle at my home, I discovered the tailgate was open and that the rifle and its case were missing. I immediately backtracked my route in an attempt to locate the firearm but was unable to find it. I then called my son, who lives very close by, and together we backtracked the route a second time to no avail. Following this second unsuccessful search, I immediately reported the firearm loss to local law enforcement and filed a police report. I sent a certified/return receipt letter explaining all of this to FORD MOTOR CO. Customer Relationship Center on 9-24-2026 (Receipt was acknowledged), and hand delivered a letter, on 9-24-2026, addressed to Mike Harrison, Parts and Service Director at Sugar Loaf Ford Inc. To date, neither Ford Motor Co. or Mike Harrison has contacted me to resolve this issue. NOTE: Winona County Sheriff (about 4-5 days afterwards) did find the gun and it's case and returned it to me. But I do NOT trust the tailgate to hold securely hold my property.
- Engine
The VVT Cam Phasers had a " consumer satisfaction program" that didnt include my VIN but included the year which was 2017-2021 3.5 ECOBOOST engine that mine has. The program has now expired and my truck has this exact issue. Not fixing the issue can cause engine failure. My truck has 47k miles on…
The VVT Cam Phasers had a " consumer satisfaction program" that didnt include my VIN but included the year which was 2017-2021 3.5 ECOBOOST engine that mine has. The program has now expired and my truck has this exact issue. Not fixing the issue can cause engine failure. My truck has 47k miles on it. I called Ford back in April 2026 to file a compliant and nothing happened. I took my truck to Germain Ford in Beavercreek, Ohio to get a diagnostic done [XXX] and they said it was the VVT cam phasers. I called Ford 10/7/2026 again about the issue and they said my VIN wasn't included and there was nothing they could do. This is absolutely absurd they are ignoring an on going issue and they refuse to do anything about this.I will continue to fight until something is done.This repair is costing me $4400. This is where you can help. Please make them do the right thing and reimburse me and I'm sure so many others their money. Thank you, [XXX] [XXX] [XXX] [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Power train
Premature transmission failure under 45k miles. While driving transmission will not shift gears causing the vehicle to stall and then suddenly engaging propulsing the vehicle forward unexpectedly. Multiple complaints online, Ford will not fix.
- Power train
Hello, so while driving I am noticing a loud, hard thunk between gears. It is really noticeable when pulling our camper. When pulling our camper it is so loud and so hard I that if I have coffee in my cup holder, it would spill. We have contacted Ford about this and they are denying there is a…
Hello, so while driving I am noticing a loud, hard thunk between gears. It is really noticeable when pulling our camper. When pulling our camper it is so loud and so hard I that if I have coffee in my cup holder, it would spill. We have contacted Ford about this and they are denying there is a transmission issue with their 10 speed transmissions. I feel there should be a recall on these transmissions because there are thousands of F150 owners having the same issue and replacing a transmission the way prices are for everything, who can afford to pay thousands of dollars for a new transmission and have it replaced.
- Power train
2018 Ford F-150 5.0L with 10R80 10-speed transmission, approximately 86,000 miles. The transmission began exhibiting abnormal shifting, including missed shifts and loss of propulsion. On multiple occasions while traveling approximately 60 mph, the vehicle suddenly lost power/propulsion. During…
2018 Ford F-150 5.0L with 10R80 10-speed transmission, approximately 86,000 miles. The transmission began exhibiting abnormal shifting, including missed shifts and loss of propulsion. On multiple occasions while traveling approximately 60 mph, the vehicle suddenly lost power/propulsion. During these events, the gear indicator changed from 10th to 1st and engine RPM appeared to increase. I do not believe the transmission physically engaged 1st gear; the actual gear engaged is UNKNOWN. The unexpected loss of propulsion at highway speed created a safety concern because the vehicle would not respond normally to accelerator input while traveling with traffic. The transmission also malfunctioned when accelerating from a stop. It would sometimes have difficulty shifting through approximately 3rd, 4th, and 5th gears and lose propulsion for approximately 3–5 seconds. I would release and reapply the accelerator trying to get the transmission to engage a gear. This could be particularly dangerous when entering or crossing traffic. An independent transmission shop inspected the vehicle and documented codes P0732, P0734, and P07F7. The shop found the transmission fluid full but dark and diagnosed an internal transmission failure requiring replacement. The transmission was replaced on October 5, 2026. To my knowledge, the original transmission was not disassembled, and the exact internal failure is UNKNOWN. The vehicle was not inspected by Ford. There was no crash or injury.
- Engine
My truck has the 3.5 ecoBoost twin turbo engine with the known cam phaser problem. Ford dealership replaced cam phasers 4 years ago and told they were putting in new designed cam phasers to prevent this from happening again. Last week, I changed the v v t cylinder because of a p0018 code, and…
My truck has the 3.5 ecoBoost twin turbo engine with the known cam phaser problem. Ford dealership replaced cam phasers 4 years ago and told they were putting in new designed cam phasers to prevent this from happening again. Last week, I changed the v v t cylinder because of a p0018 code, and found that the replacement was the old cam phasers prone to break again. Truck is just now out of warranty. And ford is doing nothing to help. Drivability is not the same has hesitation. So far, and I'm sure it's going to get worse. Check engine light just went on last week. This truck is at dealership now. My biggest problem with this situation is Ford. Dealer lied said they put in new cam phasers, which they put in old ones. I would have got an extended warranty if I knew they were the old cam phaser. Now, I will be out 3 to 5 thousand dollars because ford dealership lied to me. I have all paperwork. Service reports everything on the truck. The truck was babied. There's no reason why in 70000 miles catastrophic engine failure twice. Fixing the problem with the same problem. Parts is not a fix. It's a bandade until warranties are over. And let the people deal with it.
- Electrical system · Unknown or other
About 1 year ago the rear door on the drivers side locked and I have been unable to open it manually, with the interior unlock buttons or with the key fob. However, there have been 3 occasions during this passed year when the door inexplicably opens, twice when the truck is parked and once when I…
About 1 year ago the rear door on the drivers side locked and I have been unable to open it manually, with the interior unlock buttons or with the key fob. However, there have been 3 occasions during this passed year when the door inexplicably opens, twice when the truck is parked and once when I was driving down the freeway. To be clear, the door doesn’t just unlock, it opens. On those 3 three occasions, when I closed the door, it again locks and I’m unable to open it. I’ve taken the problem to 2 Ford dealerships. Both indicated they had never heard of this problem and there were no recalls related to the problem. One dealership diagnosed the issue, charging $100 and determined it was the door latch and offered to replace it ($472 for the latch and labor to be determined). I opted not to repair it thinking that the problem should be further diagnosed to determine if there are flaws in factory parts that create safety issues in this particular truck, make and model.
- Power train
The contact owns a 2018 Ford F-150. The contact stated while stopped at a stop sign and attempting to depress the accelerator pedal, the gear shifter independently shifted to neutral(N) and remained stuck into neutral(N). The gear shifter was shifted back and forth between park(P) and drive(D) and…
The contact owns a 2018 Ford F-150. The contact stated while stopped at a stop sign and attempting to depress the accelerator pedal, the gear shifter independently shifted to neutral(N) and remained stuck into neutral(N). The gear shifter was shifted back and forth between park(P) and drive(D) and the vehicle responded as needed. A local dealer was contacted. The vehicle was taken to the dealer to be diagnosed, and it was determined that the transmission needed to be replaced. The contact stated that the failure had occurred on several occasions The manufacturer was notified of the failure but offered no assistance. The approximate failure mileage was 72,000.
- Power train
Transmission would go from 7th gear to 1st gear causing stalling in busy traffic. Also the truck would be stuck at 7th gear when coming to a stop light and when the light turned green would not shift down to one which caused a power loss. This is a known problem with ford transmission, the…
Transmission would go from 7th gear to 1st gear causing stalling in busy traffic. Also the truck would be stuck at 7th gear when coming to a stop light and when the light turned green would not shift down to one which caused a power loss. This is a known problem with ford transmission, the dealership diagnosed the issue as a hydraulic circuit leak, which is caused by the cdf cylinder sleeve. This can be found in Ford TSB 25-2126
- Power train
I own a 2018 Ford F-150 equipped with the 10R80 automatic transmission. The vehicle currently has approximately 70,000 miles. The transmission has developed intermittent harsh shifting and, more concerningly, has repeatedly appeared to slip or disengage from gear while the vehicle is moving. On…
I own a 2018 Ford F-150 equipped with the 10R80 automatic transmission. The vehicle currently has approximately 70,000 miles. The transmission has developed intermittent harsh shifting and, more concerningly, has repeatedly appeared to slip or disengage from gear while the vehicle is moving. On multiple occasions while driving at highway speeds, pressing the accelerator did not result in acceleration because the transmission was no longer effectively transferring power to the wheels. This caused a temporary loss of motive power while traveling in traffic. The transmission subsequently re-engaged. The vehicle has also stored diagnostic trouble code P0734, indicating an incorrect 4th-gear ratio. The transmission fluid has been serviced, the vehicle software is current, and an adaptive transmission relearn has been performed by a mechanic. The P0734 code and transmission symptoms returned after these measures. Ford has issued Technical Service Bulletin 25-2475 for 2017-2020 F-150 vehicles equipped with the 10R80 transmission. The bulletin includes P0734 and harsh or delayed transmission operation and identifies axial movement of the CDF clutch-cylinder sleeve causing hydraulic circuit leakage as a possible cause. I am reporting this because the unexpected loss of propulsion at highway speeds creates a safety concern, particularly when merging, changing lanes, or traveling in surrounding traffic.
- Power train
Driving highway I70 over Vail Pass, vehicle downshifted on it's own nearly causing someone to rear-end my vehicle. Took it to three local automotive business's for a diagnostic service; they all reported the same issue PP07F7-00 CDF drum and the 10th-gear not engaging. This should not be occurring…
Driving highway I70 over Vail Pass, vehicle downshifted on it's own nearly causing someone to rear-end my vehicle. Took it to three local automotive business's for a diagnostic service; they all reported the same issue PP07F7-00 CDF drum and the 10th-gear not engaging. This should not be occurring when I've maintained service of my vehicle. I've paid for one diagnostic and shouldn't have to pay for one at my Ford dealer where it was purchased by I will have to again. I know of several owners with the exact same issue and no one is supporting them for this. I've owned four Ford trucks and this is unacceptable. Ford Case# CXH-09395547-R9D3S2
- Engine · Power train
The vehicle is stalling/jerking and long idling. I was told that the transmission needs to be replaced. Less than 80,000 miles. 2018 Ford 150
- Engine · Power train
2018 Ford F-150 Limited with the 3.5L EcoBoost engine. At approximately 60,000 miles the engine began making a rattling noise from the front of the engine on cold start, lasting several seconds. Over the last three months the noise has become progressively worse and now occurs at every cold start…
2018 Ford F-150 Limited with the 3.5L EcoBoost engine. At approximately 60,000 miles the engine began making a rattling noise from the front of the engine on cold start, lasting several seconds. Over the last three months the noise has become progressively worse and now occurs at every cold start and lasts longer. The check engine light is currently illuminated. The vehicle has not stalled or lost power. A Ford dealer (Wynne Ford, Hampton, VA) diagnosed the condition on September 24, 2026 at 104,661 miles as cam phaser failure, requiring replacement of the variable camshaft timing (VCT) units and associated timing components. This matches Ford's Technical Service Bulletin 23-2143, which covers 2017-2020 F-150 vehicles with the 3.5L EcoBoost engine built on or before November 30, 2019. Ford previously issued Customer Satisfaction Program 21B10 and warranty extension 21N03 for this same defect on March 2, 2021, but 21N03 expressly excluded the F-150 Limited trim, and both programs have since expired. The dealer additionally reported that it has submitted multiple other cam phaser repairs on 2017-2020 3.5L EcoBoost vehicles for manufacturer assistance in the past two months, including vehicles newer and with lower mileage than mine, and that all were denied. The quoted repair is $5,414.11 at my expense. I am filing this report because cam phaser failure in these engines can progress to timing chain damage and engine failure, and because Ford has documented this defect since at least 2021 without issuing a recall. I contacted Ford (case CXH-09424982) and was denied any financial assistance.
- Engine · Fuel/propulsion system · Power train
The 10-speed automatic transmission (10R80) shifts harshly and erratically, hangs in gear, and lost 2nd gear entirely, causing unpredictable acceleration and gear engagement in traffic. First reported to a Ford dealer on 6/8/2021 at 25,883 miles (dealer called it normal). Repairs: internal teardown…
The 10-speed automatic transmission (10R80) shifts harshly and erratically, hangs in gear, and lost 2nd gear entirely, causing unpredictable acceleration and gear engagement in traffic. First reported to a Ford dealer on 6/8/2021 at 25,883 miles (dealer called it normal). Repairs: internal teardown at 32,920 miles (damaged clutch, input shaft, torque converter hub); valve body repair under TSB 24-2101 at 63,483 miles; CDF hub and friction plate failure diagnosed at 77,584 miles (TSB 25-2126 failure mode); loss of 2nd gear at 88,449 miles. Pre-repair scan 9/2026 shows P0732, P076F, P07F6 (incorrect gear ratio, gears 2, 7, 9). Transmission being rebuilt again 9/2026. The engine also suffered timing chain and crankshaft failures requiring a full engine replacement at 66,108 miles and another timing repair at 77,584 miles. Three catalytic converter failures. Nearly 200 days in Ford dealer service departments.
- Power train
2018 Ford F-150 XLT Power Train / Transmission (10R80 10-Speed Automatic) ~100,000 miles (99,737) While accelerating, typically at neighborhood speeds, we sometimes get a hesitation/delay in shifting, which causes a pause and then a hard shift jerking forward, which makes it unreliable at times.…
2018 Ford F-150 XLT Power Train / Transmission (10R80 10-Speed Automatic) ~100,000 miles (99,737) While accelerating, typically at neighborhood speeds, we sometimes get a hesitation/delay in shifting, which causes a pause and then a hard shift jerking forward, which makes it unreliable at times. Not getting any dashboard warning lights, and has had the transmission flushed at 80k miles by a Ford dealership. A Ford dealership diagnostic inspection confirmed an internal mechanical defect: a failure/migration of the internal Teflon-sealed sleeve on the CDF clutch drum. The dealership technician also noted harsh upshifting between gears 3 and 4, and harsh downshifting between gears 6 and 5. The sudden, unpredictable loss of power during low-speed acceleration creates an immediate safety hazard. It leaves the vehicle vulnerable to rear-end collisions when merging into moving traffic, navigating busy intersections, or pulling out onto roadways, as the truck fails to accelerate when commanded. Furthermore, the violent gear slamming can cause momentary loss of traction or driver distraction under low-grip road conditions. Researching, what we're experiencing is very common with the 10R80 transmission that we have, and documented in TSB 23-2152, and TSB 25-2126. From what I'm reading, Ford redesigned the CDF drum in 2023 to try and correct the manufacturing issue.
- Service brakes
While driving my brakes went from normal, to squishy, to total loss of brakes. Brake indicator light came on while in the squishy phase. After avoid collision by nothing other than sure luck I was able to slow the vehicle and use the emergency brake to stop. Once stopped I popped the hood and…
While driving my brakes went from normal, to squishy, to total loss of brakes. Brake indicator light came on while in the squishy phase. After avoid collision by nothing other than sure luck I was able to slow the vehicle and use the emergency brake to stop. Once stopped I popped the hood and found the master cylinder to be all but empty. I obtained brake fluid, filled the cylinder and the brakes appeared to be normal. After a very short drive I lost brake function again and the MC was empty. No leaks could be found from lines or around the wheels Truck was towed to an independent shop where the diagnostic determined the master cylinder seal had failed and leaked brake fluid into the brake booster. I believe the Hitachi master cylinder failure is a known Ford defect. It has been recalled on the 3.5L model F150's but not the 2.7L and 5.0L models. My loss of brakes could have led to serious or fatal traffic incidence. The master cylinder is defective on all models of the years involving the recall of the 3.5L models. The recall should be extended before someone loses their life. Please look to extend the recall to include the other models of F150s.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Low-pressure fuel pump failure
On July 29, 2024, the Office of Defects Investigation (ODI) opened PE24019 to investigate complaints of low-pressure fuel pump failures in MY 2021 Ford Bronco vehicles. Some consumers reported that the failure occurred without warning while driving, resulting in a complete loss of motive power with no ability to restart…
On July 29, 2024, the Office of Defects Investigation (ODI) opened PE24019 to investigate complaints of low-pressure fuel pump failures in MY 2021 Ford Bronco vehicles. Some consumers reported that the failure occurred without warning while driving, resulting in a complete loss of motive power with no ability to restart the engine. Ford determined that several other vehicle models contain low-pressure fuel pumps substantially similar to the 2021 Ford Bronco, including the 2022-2023 Ford Bronco, 2018-2023 Ford F-150, 2022-2023 Ford Expedition, 2019-2023 Lincoln Navigator, 2020-2023 Ford F-250-F-550, 2024 Ford Super Duty Chassis Cab, 2024-2025 Ford Ranger, 2020-2023 Ford Explorer, 2020-2023 Lincoln Aviator, and 2021-2025 Ford Mustang. ODI's investigation found that the affected vehicles may lose fuel pressure and flow from the fuel delivery module (consisting of a low-pressure fuel pump, jet pump, reservoir, and other parts) due to a low-pressure pump failure. This can cause the engine to stall while driving. The root cause is reduced internal clearance in the fuel pump, increasing friction and sensitivity to vapor lock. Fuel blockage from contamination inside the jet pump also contributed to the failure. Ford stated that the contamination source was unknown. On July 7, 2025, Ford filed recall 25V-455 for certain 2021-2023 Ford F-550 SD/F-450 SD/F-350 SD/F-250 SD, 2021-2022 Lincoln Navigator, 2021-2022 Ford Mustang, 2021-2022 Ford F-150, 2021-2023 Ford Explorer, 2022 Ford Expedition, and 2021-2023 Ford Bronco vehicles produced between July 1, 2021, and July 30, 2022. The recall also included certain 2021-2023 Lincoln Aviator produced between July 1, 2021, and December 21, 2022. Ford explained in its recall filingthat the production dates used for the recall were based on changes in the manufacturing process. Specifically, Ford determined that in June 2021, the supplier modified the jet pump manufacturing process, producing fuel pump chambers with a lower-than-specified internal clearance. In July 2022, the supplier implemented corrective actions to the manufacturing process by adding two additional vacuum pumps to reduce contamination during the production of the jet pump. ODI has identified approximately 1,000 reports involving vehicles covered in this investigation but excluded from recall 25V-455. However, even with such reports, these vehicles experienced comparatively lower failure rates than the vehicles that are subject to Recall 25V-455. Ford has explained that these vehicles were excluded from the recall population because they did not experience the manufacturing changes that prompted the recall. Specifically, according to Ford, vehicles built before July 1, 2021 (the recall production start date), were not affected by the supplier’s change to the jet pump manufacturing process. Even after closing this investigation, ODI will continue to monitor complaints for vehicles excluded from recall 25V-455 to consider whether they exhibit the same risks as the vehicles encompassed by the recall. The recall remedy is currently under development. In view of Ford’s recall action, ODI is closing this Preliminary Evaluation, but will continue to monitor the issue as a remedy is developed and implemented. ODI will take additional action if warranted by future circumstances. To review the reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
- Seatbelt Pretensioner Fire
On June 18, 2018, the Office of Defects Investigations (ODI) opened a Preliminary Evaluation (PE18-008) to investigate complaints alleging post-crash fires at the B pillar in the area of the seat belt pretensioners on MY 2014-2018 Ford F-150 Regular Cab, and Super Crew Cab Vehicles. On August 24, 2018, Ford Motor…
On June 18, 2018, the Office of Defects Investigations (ODI) opened a Preliminary Evaluation (PE18-008) to investigate complaints alleging post-crash fires at the B pillar in the area of the seat belt pretensioners on MY 2014-2018 Ford F-150 Regular Cab, and Super Crew Cab Vehicles. On August 24, 2018, Ford Motor Company recalled (FSA 18S27 - NHTSA #18V568) the affected population. Ford's investigation found that some front seat belt pretensioners may generate sparks during deployment in excess of Ford's specification. Sparks in the pretensioner exhaust gases inside the lower portion of the B-pillar may subsequently ignite combustible components contained in the B-pillar, such as insulation or carpet, and may cause a subsequent vehicle fire. ODI also requested relevant information from other manufacturers to assess the potential scope of post-crash pretensioner fires. Ford will notify owners and require dealers to remove B-pillar insulation material and wiring harness tape, and install heat resistant tape, free of charge. The recall notification began September 28, 2018.Owners may contact Ford customer service at 1-866-436-7332.The VOQs associated with the closing of this investigation are: 11143035, 11130056, 11129828, 11128761, 11127993, 11127880, 11124717, 11123419, 11119651, 11119626, 11114065, 11113160, 11111822, 11097937, 11078447, 11014688
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010950Various vehicles equipped with a 2.7L or a 3.0L gas engine may require a crankshaft bolt replacement during repairs. Various vehicles equipped with a 2.7L or a 3.0L gas engine may require a crankshaft bolt replacement during repairs.
- 11009827The affected vehicles have a Powertrain Control Module (PCM) calibration that could, over time, reduce the effectiveness of the emissions control system and the monitoring accuracy of the catalytic converters efficiency. As a result, the Malfunction Indicator Light (MIL) may illuminate for low catalyst efficiency even though a catalytic converter repair may not be necessary.
- 11009445Some 2018-2024 F150/Edge, 2018 MKX, 2019-2023 Nautilus, 2020-2025 Explorer/Aviator, 2021-2024 Bronco, and 2024 Ranger vehicles equipped with a 2.7L EcoBoost or a 3.0L EcoBoost engine may exhibit an engine oil leak from the crankshaft rear seal with retaining plate.
- 11008948While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions. While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions.
- 11007943018-2024 F-150/F-Super Duty - Tailgate Step Binds/Will Not Open Or Opens/Pops Up While Driving
- 11006476Some 2017-2020 F-150 and 2017-2019 F-Super Duty vehicles may not successfully complete the Transmission Characterization/Solenoid IDN procedure using the Integrated Diagnostic System (IDS) scan tool. This may be due to the IDS not being at the latest software level
- 11005305This article supersedes TSB 22-2219 to update the Parts List and Service Procedure to clarify applicable steps by vehicle application. Some 2003-2020 Expedition/Navigator and 2006-2020 F-150 (non-Raptor) vehicles equipped with 4WD may exhibit grinding/clicking/ratcheting noise from the front wheel area. This may be due to partial engagement of the integrated wheel ends (IWE). To correct this condition, follow the Service Procedure to remove and cap the vacuum supply line or to reprogram the transfer case control module (TCCM) and replace any worn vacuum and/or IWE components.
- 11001582This article supersedes TSB 24-2115 to update the Service Procedure. Some 2018-2020 F-150 vehicles equipped with a 2.7L EcoBoost may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0420 and/or P0430 stored in the powertrain control module (PCM). This may be due to calibration and controls sensitivity. To correct the condition, follow the Service Procedure to perform the catalyst stabilization drive cycle.
- 11001174This article supersedes TSB 21-2175 to update the TSB Service Procedure. Some 2016 MKS, 2016-2017 Navigator, 2016-2018 F-150/Focus/C-MAX/Edge/Fiesta/MKX/Transit Connect/Mustang, 2017-2018 Continental/Fusion/MKZ, 2017-2019 Explorer, 2016-2019 Escape/MKC/Flex/MKT/Taurus/Transit/Expedition/F-Super Duty, and 2018-2019 EcoSport vehicles equipped with SYNC 3 may experience various SYNC performance related concerns. related concerns including but not limited to: Display operation concerns Navigation inoperative Voice recognition concerns Phone connection issues Dropped phone connections Applink related performance Travel Link not present or showing incorrect traffic Slow system response This may be due to the SYNC software. To correct the condition, follow the Service Procedure to update the accessory protocol interface module (APIM) software. NOTE: Ford has found some of the APIMs replaced and returned for inspection contained an outdated software level and the APIM did not require replacement. The customer concern may have been resolved by updating the APIM with latest level of software.
- 11000297Various vehicles equiped with 10R80/10R80 MHT/10R100/10R140 transmissions may require replacement of the seal kits (7153) when internal repairs are being performed. These kits come with 4 wheel drive (4WD) seals and will no longer include the 2WD seals. When working on a 2WD vehicle, any 2WD seals must be ordered separately. Refer to the parts catalog for the proper 2WD seals required.
- 10254166This article supersedes TSB 22-2260 to update the vehicle applications. Some 2018-2020 F-150 vehicles equipped with a 2.7L EcoBoost may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0420 and/or P0430 stored in the powertrain control module (PCM). This may be due to calibration and controls sensitivity.
- 10254142Some 2018-2019 Explorer and 2018-2024 Transit/F-150/Expedition/Navigator vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P0627, P025A, P025B, P00C6, P008A and/or U0109 stored in the powertrain control module (PCM). Diagnosis should include checking for an intermittent or partial disconnect of the harness to the fuel pump control module (FPCM) connector, connector pin push-outs, damaged pins/terminals, or loose/corroded grounds. Confirm FPCM connector (Explorer - C3239, Transit - C433, F-150 - C460/C4336, Expedition/Navigator - C433/C4033) is fully seated and inspect applicable grounds (Explorer G302, Transit - G401, F-150 - G401, Expedition/Navigator - G403/G406) prior to performing guided diagnostics or replacing any components.
- 10254138All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
- 10252674This article supersedes TSB 24-2046 to update the Service Procedure LTIS statement. Some 2017-2020 F-150, 2018-2021 Expedition/Navigator/Mustang, 2019-2023 Ranger vehicles equipped with a 10R80 transmission may exhibit a harsh/delayed engagement and/or harsh/delayed shift, an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) that are stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve.
- 10251952For 2015-2024 Ford and Lincoln vehicles equipped with turbocharged engines and customer concern of an engine oil leak, refer to Workshop Manual (WSM), Section 303-00 for oil leak inspection and testing methods. Ford has evaluated turbochargers replaced for oil leak symptoms and although oil may collect on the external surface of a turbocharger, it is extremely rare for a turbocharger assembly to be the root cause of the oil leak. Careful inspection of the turbocharger oil feed and drain tubes should be performed along with the recommended WSM procedures as needed. Warranty claims for turbocharger replacement going forward will be assessed.
- 10251951Some 2011-2024 Mustang and F-150 vehicles equipped with a 5.0L engine may exhibit a tick tap and/or typewriter ticking noise at idle after an engine oil change. It is often referred to as typewriter noise because of its similarity to the sound of a mechanical typewriter. The noise in question may be heard on some engines when engine temperatures reach 150F (65C) or higher and engine speed is at idle up to approximately 1700 RPM. It can typically be heard at the front wheel well and is often isolated to the transmission bell housing or oil pan area. The typewriter noise tick rate can be faster or slower and is not detrimental to the engine function or durability and has no short or long term effects on the engine. This an operating characteristic of the 5.0L engine and no repairs should be attempted. This information along with an example audio clip has been added to the WSM Section 303-00 Engine System General Information > Diagnosis and Testing > Engine > PPT F > Step F2.
- 10251934During service and repair requiring removal and replacement of a crankshaft bolt and/or crankshaft damper, achieving proper torque of the crankshaft pulley bolt is critical. Incorrect torque may allow the bolt to loosen resulting in the timing gear breaking and engine damage. Replacement of the bolt is critical to the repair and accurately following the installation procedure in the Workshop Manual (WSM) Section, 303-01 is extremely important. The bolt torque procedure can be found in the crankshaft front seal removal and installation procedure or in the engine assembly procedure.
- 10251469This article supersedes TSB 23-2350 to update the Issue statement and the Service Procedure. Some 2017-2020 F-150, 2018-2021 Expedition/Navigator/Mustang, 2019-2023 Ranger vehicles equipped with a 10R80 transmission may exhibit a harsh/delayed engagement and/or harsh/delayed shift, an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve.
- 10245418Some 2017-2020 F-150, 2018-2021 Expedition/Navigator/Mustang, 2019-2023 Ranger vehicles equipped with a 10R80 transmission may exhibit a harsh/delayed engagement and/or harsh/delayed shift, an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes This may be due to the software in the powertrain control module (PCM) or transmission control module (TCM), the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve. To correct the condition, follow the Service Procedure to identify and correct the condition.
- 10244827Some 2016-2018 F-150 and 2016-2017 Expedition/Navigator vehicles may require pressure bleeding of the brake system. The brake system pressure bleeding procedure in the Workshop Manual (WSM), Section 206-00, has been updated to add a warning to not apply the brake pedal or master cylinder damage may occur.
- 10243652Some 2015-2019 F-Super Duty and 2015-2020 F-150/Mustang vehicles may require replacement of the powertrain control module (PCM) for various reasons. While performing a programmable module installation (PMI) using the Integrated Diagnostic Service (IDS) scan tool, an error message may state: Configuration Failed, Would You Like To Retry? This may be due to improper module replacement steps. Make sure that the original module is installed in the vehicle, delete the vehicle session, then start a new vehicle session. Once the session starts, run the PCM PMI and install the new PCM only when the scan tool instructs. Finish the PMI by following the prompts given by IDS. If the original PCM is not available, it is possible to configure the module by running as-built programming on the PCM. When IDS asks to obtain part numbers or configuration data, select configuration data.
- 10243648Some 2017-2023 Ford and Lincoln vehicles equipped with a 10R60/10R80/10R80 MHT/10R100 transmission may exhibit a whine noise at idle and/or while driving. This may be identified as coming from the bellhousing and the front of the transmission fluid pan. The whine noise may become louder when the transmission is at operating temperature and may increase with engine revolutions per minute (RPM) in the park (P) position. A small amount of whine noise is considered to be characteristic of the 10R60/10R80/10R80 MHT/10R100 transmissions due to the offset gear drivetrain in the front support and has no effect on durability. Use the Report a Vehicle Concern link at the bottom of OASIS to submit a report if there is a customer concern of whine noise describing operating conditions and noise severity.
- 10243609Some vehicles equipped with power folding mirrors may exhibit power folding mirrors that are inoperative or exhibit a clicking sound. This may be due to the mirrors being manually folded in, during transportation, going through a car wash, bumped in a parking lot, or found during pre-delivery inspection (PDI). Prior to the replacement of any components, attempt to synchronize the mirrors by following the Power Mirrors Synchronization procedure. Refer to Workshop Manual (WSM) Section 501-09 Rear View Mirrors - General Procedures - Power Mirrors Synchronization.
- 10241627In various 2017-2023 Ford and Lincoln vehicles, customers may receive a message in the FordPass or LincolnWay App stating Feature Unavailable. Since this is a fleet vehicle, it cannot access the (SYNC Connect) FordPass or LincolnWay app through the TCU Embedded Modem. If this message appears, the vehicle may be equipped with a fleet telematics module. Replacement of the TCU or TCU related repairs will not prevent this message from appearing. Refer the customer to in app FordPass Guides or LincolnWay Concierge Teams to aid with fleet telematics removal. Open app, select Account > Help > CHAT or CALL option.
- 10241447This article supersedes TSB 22-2428 and 23-2176 to update the Issue, Action and Service Procedure. Some 2017-2023 F-150, 2018-2023 Expedition/Navigator/Mustang, 2019-2023 Ranger, 2020-2023 Explorer/Aviator/Transit and 2021-2023 Bronco vehicles equipped with a 10R60/10R80/10R80MHT transmission may exhibit a harsh/delayed engagement and/or harsh/delayed shift, an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the software in the powertrain control module (PCM) or transmission control module (TCM), the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve. To correct the condition, follow the Service Procedure to identify and correct the condition.
- 10240743The Service Awareness Newsletter is an informal communication that contains information that may not be presently available in a TSB, SSM, GSB, or other electronic communication. This article includes information on warranty, technical service tips and other service information.
- 10240719Some F-Super Duty and F-150 vehicles equipped with trailer tow mirror may exhibit various exterior rear view mirror functional concerns that require replacement after diagnosis. To properly determine if the defect is warrantable, cleaning and close inspection of the affected mirror may be required. To aid in proper warranty determination, the Rear-View Mirror Analysis general service bulletin (GSB) has been updated with a detailed cleaning procedure that should be followed prior to any inspection. New labor operations (17682ZZ or 17682ZZT) have been created that covers the cleaning and inspection process and may be used even if condition of failure is non-warrantable. Ford has inspected numerous returned parts and determined many cases are caused by damage which is unwarrantable and may be subject to chargeback. Refer to the latest version of the GSB on OASIS.
- 10237786TSB 22-2428 is missing some labor operations. For any missing labor operations, claim available new model labor operations or m-time. Refer to this article on the repair order. When replacing the CDF cylinder, the current TSB does not require a complete transmission overhaul or cooler and converter flushing. Ford is currently reviewing the TSB. Monitor OASIS for updates.
- 10236685Some 2018-2021 F-150 vehicles equipped with a 3.0L diesel engine, 2016-2022 F-650/F-750 vehicles equipped with a 6.7L engine, and 2017-2022 F-Super Duty vehicles equipped with a 6.7L engine and built on or before 08-Mar-2022 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P21DD, P20BA. P20B9, P204C, P208A, P208B, P208C, P203B, P205B, P21CD and/or U02A2 in the powertrain control module (PCM). This may be due to water intrusion within connectors C3613 and/or C4851/C3610 on the reductant harness going to the reductant pump/heater assembly and the reductant level sensor/quality module. This may also be due to movement of the wiring harness causing terminal fretting. To correct the condition, follow the Service Procedure to replace the reductant tank harness, the reductant pump/heater assembly and/or the reductant tank, as well as securing the wiring harness using a cable zip tie fastener.
- 10236683This article supersedes TSB 23-2123 to update the Issue statement. Some 2017-2020 F-150, 2018-2021 Expedition/Navigator/Mustang and 2019-2023 Ranger vehicles equipped with a 10R80 automatic transmission may exhibit a harsh engagement/harsh shift/delayed shift. It is possible the vehicle may also have an illuminated malfunction indicator lamp (MIL) or diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the keep alive memory in the PCM/TCM or the transmission main control valve body. To correct the condition, follow the Service Procedure to overhaul the main control valve body and/or perform an adaptive learning drive cycle.
- 10236680Some 2017-2023 F-150, 2018-2023 Expedition/Navigator/Mustang, 2019-2023 Ranger, 2020-2023 Explorer/Aviator/Transit and 2021-2023 Bronco vehicles equipped with a 10R60 transmission and built on or before 23-Dec-2022 or with a 18R80/10R80MHT transmission and built on or before 15-Aug-2022 may exhibit a harsh/delayed engagement and/or harsh/delayed shift. It is possible the vehicle may also have an illuminated malfunction indicator lamp (MIL) or diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the software in the PCM or TCM, the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve.
- 10236037Some 2017-2020 F-150 and 2018-2020 Expedition/Navigator vehicles built on or before 30-Nov-2019 and equipped with a 3.5L EcoBoost engine may exhibit a ticking/tapping or rattle type noise from the top front cover area of the engine on initial start-up after a cold soak of 6 hours or more that may last for 2-5 seconds. Some vehicles may also exhibit an intermittent condition with no auto restart during auto-start-stop operation with or without diagnostic trouble code (DTC) P164C present in the powertrain control module (PCM). This may be due to a worn variable camshaft timing (VCT) unit. To correct the condition, follow the Service Procedure to replace the VCT units.
- 10235153For 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identification number (VIN) from a different vehicle. Most modules on these affected vehicles are VIN/vehicle specific and hardware variations between modules do exist. Swapping a module from a vehicle or ordering a module using a different vehicle/VIN can cause ineffective repairs and additional vehicle down time. Make sure all appropriate Workshop Manual (WSM) procedures are followed when diagnosing the condition prior to all module replacements and only order modules using the correct VIN.
- 10234596Some 2017-2020 F-150, 2018-2021 Expedition/Navigator/Mustang and 2019-2023 Ranger vehicles equipped with a 10R80 automatic transmission may exhibit a harsh engagement/harsh shift/delayed shift. It is possible the vehicle may also have an illuminated malfunction indicator lamp (MIL) or diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to incompatibility of the adaptive calibration to adapt to hardware break-in over time. To correct the condition, follow the Service Procedure steps to overhaul the main control valve body and/or perform an adaptive learning drive cycle.
- 10234593Some 2015-2020 F-150 and 2017-2022 F-Super Duty vehicles may exhibit a lack of heat or cooling from the cabin vents when the climate control settings are adjusted between hot and cold. This may be due to a stuck/binding temperature door within the climate control housing or binding/inoperative temperature door actuator. Diagnostic trouble code (DTC) B1081:07 may be present in the front controls interface module (FCIM) or heating ventilation and air conditioning (HVAC) module. To correct the condition, follow the Service Procedure to remove the climate control housing and replace the temperature door cam(s), lubricate the temperature blend door bearing surface, and apply flock tape to actuator to seal out debris.
- 10233745Some 2021 F-150 vehicles built on or before 01-Feb-2021, 2017-2020 F-150 vehicles equipped with a 3.5L EcoBoost engine, 2018-2020 F-150 vehicles equipped with a 2.7L EcoBoost or 5.0L engine, 2019-2020 F-150 vehicles equipped with a 3.0L diesel engine may exhibit a high pitched squeal or whistle type noise from the engine compartment after the engine is shut off. This condition may be due to the air conditioning (A/C) low side system pressure exceeding the high side pressure resulting in equalization of A/C system pressures through the A/C compressor. An updated A/C compressor has been released to resolve this concern. For claiming, use causal part 19703 and applicable labor operations in Section 11 of the Service Labor Time Standards (SLTS) Manual.
- 10233695Some 2017-2023 Ford and Lincoln vehicles equipped with a 10R60/10R80/10R80 MHT/10R100 transmission may exhibit a whine noise at idle and/or while driving. This may be identified as coming from the bellhousing and the front of the transmission fluid pan. The whine noise may become louder when the transmission is at operating temperature and may increase with engine revolutions per minute (RPM) in the park (P) position. A small amount of whine noise is considered to be characteristic of the 10R60/10R80/10R80 MHT/10R100 transmissions due to the offset gear drivetrain in the front support and has no effect on durability.
- 10232485Some vehicles equipped with a 2.7L, 3.0L,3.5L or 5.0L engine may require replacement of the long block engine assembly. New service kits have been released which include all the one-time-use components required in the service procedure for removal and replacement of the long block engine assembly. Refer to the Ford Electronic Parts Catalog (ECAT) for long block service kit part number by application.
- 10230835Some 2018-2023 F-150, Expedition, Navigator, Transit, Aviator and Explorer vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P0627, P025A, P025B, P00C6, P008A and/or U0109 stored in the powertrain control module (PCM). This may be due to an intermittent or partial disconnect of the harness to the fuel pump control module (FPCM) connector, connector pin push-outs, damaged pins/terminals, or loose/corroded grounds. Inspect FPCM connector, applicable grounds (F-150 - G401, Expedition/Navigator - G403, Transit - G401, 2018-2019 Explorer G302, 2020-2022 Explorer/Aviator - G407) and confirm FPCM connector (F-150 - C4336, Expedition/Navigator - C433, Transit - C433, 2018-2019 Explorer - C3239, 2020-2022 Explorer/Aviator - C4033) is fully seated prior to performing PC/ED diagnostics or replacing any components.
- 10230798Some 2015-2020 F-150 vehicles equipped with a 2.7L, 3.5L or 5.0L engine may require replacement of the long block engine assembly. New service kits have been released which include all the one-time-use components required in the service procedure for removal and replacement of the long block engine assembly. Refer to the Ford Electronic Parts Catalog (ECAT) for long block service kit part number by application.
Every Ford F-150 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.