2005 Toyota Avalon
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Avalon › 2005
These records cover every 2005 Toyota Avalon. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
7 recalls name the 2005 Toyota Avalon. Newest first.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010…
Risk and remedy
Risk
If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
Remedy
SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
Toyota IS recalling certain model year 2005-2006 avalon, model year 2004-2006 highlander, model year 2004-2006 lexus RX, and model year 2006 lexus GS and IS vehicles. brake fluid containing polymers IS used that acts as lubricants for certain brake system components. if replacement brake fluid IS used that does not contain such polymers, or that contains…
Risk and remedy
Risk
A leak of brake fluid could lead to a change in brake pedal feel and overtime a degradation in braking performance increasing the risk of a crash.
Remedy
Dealers will replace the seal with a newly designed one. this service will be performed free of charge. the safety recall began on november 15, 2010. owners may contact toyota at 1-800-331-4331 and lexus at 1-800-255-3987.
Southeast toyota IS recalling certain model year 2005-2011 passenger vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
A driver may overload a vehicle which may increase the risk of a crash.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. the safety recall began on may 27, 2010. owners may contact southeast toyota at 1-800-301-6859.
Toyota IS recalling certain model year 2005-2010 avalon, model year 2007-2010 camry, model year 2009-2010 corolla, corolla matrix, RAV4, model year 2010 highlander, model year 2008-2010 sequoia, and model year 2007-2010 tundra vehicles. due to the manner in which the friction lever interacts with the sliding surface of the accelerator pedal inside the…
Risk and remedy
Risk
The accelerator pedal may become hard to depress, slow to return to idle, or, in the worst case, mechanically stuck in a partially depressed position, increasing the risk of a crash.
Remedy
Dealers will install a reinforcement bar in the accelerator pedal which will allow the pedal to operate smoothly. gm will notify owners for the pontiac vibe please see 10v-018. this service will be performed free of charge. the safety recall IS expected to begin on february 5, 2010 and will be completed on march 15, 2010. owners may contact toyota at 1-800-331-4331.
Toyota IS recalling certain model year 2004-2010 passenger vehicles. the accelerator pedal can get stuck in the wide open position due to its being trapped by an unsecured or incompatible driver's floor mat.
Risk and remedy
Risk
A stuck open accelerator pedal may result in very high vehicle speeds and make it difficult to stop the vehicle, which could cause a crash, serious injury or death.
Remedy
Toyota filed an amended defect report on november 25, 2009, stating that dealers will modify the accelerator pedal and, on certain vehicles, alter the shape of the floor surface under the pedal. these changes address the risk of pedal entrapment due to interference with the floor mat. redesigned accelerator pedals will become available beginning in april 2010 and dealers will replace any modified pedal with the new pedal if desired. also, dealers will replace any genuine toyota or lexus all-weather floor mats with redesigned all-weather mats, or repurchase the previous mats from owners who do not want the new ones. additionally, software modifications will be installed on camry, avalon and lexus ES 350, IS 350 and IS 250 models that will ensure that the brake overrides the accelerator in the event both brake and accelerator pedals are applied. toyota will begin mailing letters to owners on december 31, 2009. owners may contact toyota at 1-800-331-4331, lexus at 1-800-255-3987.
On certain vehicles, due to improper assembly of the air bag inflator, which IS used in the side air bag, the curtain shield air bag, and the knee air bag assembly, some inflators were produced with an insufficient amount of the heating agents necessary for proper air bag deployment. in this condition, the expansion force of the gas may be insufficient to…
Risk and remedy
Risk
This may increase the risk of injury to the occupant in the involved seating position in the event of a crash.
Remedy
Dealers will replace the specific srs air bag. the recall began on april 6, 2006. owners may contact toyota at 1-888-270-9371, scion at 1-866-548-1851, or lexus at 1-800-255-3987.
On certain passenger vehicles, the steering yoke was not welded to the steering shaft. if the vehicle IS operated in this condition, there IS a possibility that the yoke may come off from the shaft, and could result in a loss of vehicle steering control.
Risk and remedy
Risk
Loss of control of the vehicle could result in a crash.
Remedy
Dealers will inspect the steering yoke and shaft weld condition, and replace the steering column assembly free of charge. the recall began on may 2, 2005. owners may contact toyota at 1-800-331-4331.
Owner complaints
228 complaints36 involved a crash3 involved a fire21 injuries1 deaths
What owners report most
Latest complaints
- Unknown or other
Unkown
- Service brakes
I have been experiencing sponginess in the brakes. the air conditioner stopped working, the temperature gauges stopped working, and the ABS and Brake light are all on in the dash. Reviewing possible fixes according to Toyota Nation Forum online all these symptoms are a result of an ABS Control…
I have been experiencing sponginess in the brakes. the air conditioner stopped working, the temperature gauges stopped working, and the ABS and Brake light are all on in the dash. Reviewing possible fixes according to Toyota Nation Forum online all these symptoms are a result of an ABS Control Module. This part alone costs almost $1500.00 and supposedly is a very common problem with this type of Avalon, Thank you for researching this further.
- Vehicle speed control
The contact owns a 2005 Toyota Avalon. The contact stated while attempting to make a left turn, the accelerator pedal was depressed and became inoperable. The contact stated that the vehicle failed to accelerate as intended. There was no warning light illuminated. The vehicle was not taken to be diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was 88,000.
- Vehicle speed control
The contact owns a 2005 Toyota Avalon. The contact stated that while driving at an undisclosed speed and attempting to accelerate, the vehicle inadvertently lost motive power. The vehicle then returned to normal functionality, but the failure became a regular occurrence. The vehicle was taken to an…
The contact owns a 2005 Toyota Avalon. The contact stated that while driving at an undisclosed speed and attempting to accelerate, the vehicle inadvertently lost motive power. The vehicle then returned to normal functionality, but the failure became a regular occurrence. The vehicle was taken to an independent mechanic, who was unable to duplicate the failure. The vehicle was not repaired. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 10V017000 (Vehicle Speed Control); the VIN was included, but the vehicle had already been repaired under recall. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline for assistance. The failure mileage was 170,000.
- Electrical system › Instrument cluster/panel
The contact owns a 2005 Toyota Avalon. The contact stated that the vehicle was in direct sunlight, and the instrument panel cracked. The vehicle was taken to a dealer and the contact was informed that the VIN was not under recall for the failure. The manufacturer was aware of the failure and…
The contact owns a 2005 Toyota Avalon. The contact stated that the vehicle was in direct sunlight, and the instrument panel cracked. The vehicle was taken to a dealer and the contact was informed that the VIN was not under recall for the failure. The manufacturer was aware of the failure and referred contact to the NHTSA Hotline for assistance. The vehicle was not repaired. The failure mileage was approximately 165,000.
- Forward collision avoidance › Warnings · Power train
After the alternator and battery dies the car went right back to accelerating by itself into traffic, I contacted Toyota and explained that after the battery and alternator died the problem came right back but they seem not to care
- Seats · Unknown or other · Wheels
Please check for all the recalls on my car
- Exterior lighting · Fuel/propulsion system · Suspension
Please check for all of the recalls on my car
- Electrical system · Engine · Power train
Please check for all recalls on my car.
- Air bags · Service brakes · Structure › Body
Please check all recalls on my car.
- Air bags · Electrical system · Seats
One of my airbags or out. My heated seats on my passenger side heats up on its own . I also have lots of water on my passenger side floor when it rains. My gas pedal seem to get stuck when taking off.
- Air bags · Unknown or other
Dashboard and airbag covers including dash are badly cracked, airbag safety is potentially compromised if deployed. The car is available for inspection at my residence at any time. Toyota offered to supply and replace dash covers to fix this danger, but parts were never made available. The hazard remains.
- Electrical system · Unknown or other
Leaks. My stereo system shorted out due to leaking water from windshield area. I since learned Toyota knew about at least 2 leaking problems (in TSB’s) however the coverage was only for 36,000 miles or 36 months. I didn’t detect these issues until after that time. Now it will cost Thou$ands to remedy.
- Service brakes, hydraulic
TL* the contact owns a 2005 toyota avalon. The contact stated that while driving, the brake pedal was depressed and became soft. The brake pedal was pumped several times to fix the issue. There was no warning. The dealer was not called. The failure recurred several times. The vehicle was taken to…
TL* the contact owns a 2005 toyota avalon. The contact stated that while driving, the brake pedal was depressed and became soft. The brake pedal was pumped several times to fix the issue. There was no warning. The dealer was not called. The failure recurred several times. The vehicle was taken to an independent mechanic and diagnosed with a brake master cylinder failure. The part to do the repair was not available. The vehicle was not repaired. The contact attempted to reach the manufacturer by phone but was unsuccessful. The failure mileage was approximately 225,000.
- Unknown or other
Lower front dash IS cracked and broke
- Unknown or other
The rear sunshade won't go down and it's stuck in the up position hence causing poor visibility when driving at night.
- Vehicle speed control
TL* the contact owned a 2005 toyota avalon. The contact stated that while driving at approximately 70 mph, the vehicle independently accelerated and while trying to avoid hitting other vehicles, the vehicle flipped over 4 times. No injury occurred. A police report filed. The vehicle was towed an…
TL* the contact owned a 2005 toyota avalon. The contact stated that while driving at approximately 70 mph, the vehicle independently accelerated and while trying to avoid hitting other vehicles, the vehicle flipped over 4 times. No injury occurred. A police report filed. The vehicle was towed an independent facility but the vehicle was not repaired. The dealer was not contacted. The vehicle was not diagnosed. The manufacturer of the vehicle was not notified of the incident. The approximate failure mileage was 175,000. The vehicle was destroyed. The vin was not provided.
- Unknown or other
On 2005 to 2008 toyota avalon limited models the 3RD break light works sometimes and other time it doesn't I have looked on a lot of forum and so many people are complaining about the same problem and I got a warning for it
- Structure › Body · Visibility/wiper
Cracked and melting dashboard and glossy, reflecting sunlight. I have taken the car to toyota and they asked me to pay $2000.00 to replace it.
- Air bags · Service brakes · Vehicle speed control
On 10/25/18 I was involved in a head on collision when my gas pedal hung and lurched forward while I was pulling into a parking space at a doctor's office. I had slowed down to park when my car jumped the curb and hit the building head on. It was 3:50 in the afternoon and a clear visibility day.…
On 10/25/18 I was involved in a head on collision when my gas pedal hung and lurched forward while I was pulling into a parking space at a doctor's office. I had slowed down to park when my car jumped the curb and hit the building head on. It was 3:50 in the afternoon and a clear visibility day. The police report has my speed at about 20 mph. My airbag didn't deploy, I did have my seatbelt on. It was straight front end damage to my car. As a result of the impact I am suffering from whiplash and possible (traumatic brain injury), also neck and back pain. I believe that the cause of this accident was the gas pedal 'sticking' and as a result of no airbag deployment causing more motion on my head, neck, and back.
- Steering
Telescoping steering wheel colaspses when driving.
- Fuel/propulsion system · Power train
TL* the contact owns a 2005 toyota avalon. While driving various speeds, the vehicle shifted into neutral without warning. The contact also stated that the vehicle jerked and the gears shifted without warning. The contact further stated that the vehicle lost power. Toyota of bowie (16700 governor…
TL* the contact owns a 2005 toyota avalon. While driving various speeds, the vehicle shifted into neutral without warning. The contact also stated that the vehicle jerked and the gears shifted without warning. The contact further stated that the vehicle lost power. Toyota of bowie (16700 governor bridge rd, bowie, md 20716, 301-867-1600) was unable to duplicate the failures. The contact cited the fuel system as a possible defect. The manufacturer was made aware of the failures and stated that there was no recall on the vehicle. The failure mileage was 20.
- Service brakes
TL* the contact owns a 2005 toyota avalon. The contact stated that the ABS and brake warning indicators illuminated. The vehicle was taken to frontier toyota (23621 creekside rd, valencia, ca 91355, 877 615-5557) where it was serviced per nhtsa campaign number: 10v499000 (service brakes…
TL* the contact owns a 2005 toyota avalon. The contact stated that the ABS and brake warning indicators illuminated. The vehicle was taken to frontier toyota (23621 creekside rd, valencia, ca 91355, 877 615-5557) where it was serviced per nhtsa campaign number: 10v499000 (service brakes, hydraulic). The remedy failed to repair the vehicle. The contact also stated that the temperature gauge illuminated after the repair. The manufacturer was not notified of the failure. The failure mileage was 245,000.
- Engine · Service brakes
TL* the contact owns a 2005 toyota avalon. While driving, the contact depressed the brake pedal and the vehicle came to a slow stop. The contact stated that the engine made a revving noise, but the accelerator pedal was not depressed. There were no warning indicators illuminated. The vehicle was…
TL* the contact owns a 2005 toyota avalon. While driving, the contact depressed the brake pedal and the vehicle came to a slow stop. The contact stated that the engine made a revving noise, but the accelerator pedal was not depressed. There were no warning indicators illuminated. The vehicle was taken to an independent mechanic where it was diagnosed that the computer needed to be reprogrammed. The computer was reprogrammed; however, the failure recurred. The vehicle was not repaired. The dealer was not contacted. The manufacturer was not notified of the failure. The approximate failure mileage was 81,000.
- Service brakes · Vehicle speed control
I was backing into my garage and suddenly I could not control my car. it accelerated and I could not stop it. I hit the brake and car didnt stop until it crashed into my refrigerator in the garage. it happened so fast, like a bad dream. I could not control my car. I was only going approx 5 miles and hour then it accelerated to a great speed I could not control or stop my car.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10210376OBSOLETE NOTICE Month 09, 2022: This bulletin is now obsolete. Please see T-SB-0014-22.
- 10210375TSB: This Service Bulletin includes procedures to replace damaged or loose front carpet floor retainer(s) without replacing the carpet assembly. Follow the Repair Procedure in this bulletin to replace the loose or damaged carpet floor retainer(s).
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10204571TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10197492Warranty enhancement program.
- 10197491Warranty enhancement program.
- 10197476Replacement vin plates.
- 10197473Product general information.
- 10190460Toyota Safety Recall and Service Campaign - Technician Certification Requirements
- 10190453TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10188913TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2021 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10187241TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10186195TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10177782TSB: OBSOLETE NOTICE June 23, 2020: This bulletin is now obsolete. Please see T-SB-0063-20.
- 10177781TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. ST005-01, SU001-08, and T-SB-0391-08. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Be sure to review the entire content of this service bulletin before proceeding. This Service Bulletin provides best practice procedures for vehicle pulling complaint, diagnosis, and repair for 2002 ? 2021 model year Toyota vehicles. This information supplements Repair Manual procedures when the symptoms are: ?Vehicle Pulling: The vehicle moves to the right or left when the driver holds the steering wheel while driving straight ahead without exerting steering effort. ?Steering Wheel Off Center: The vehicle travels straight, but the steering wheel is not pointed straight ahead. The vehicle is not pulling. Before repairing a vehicle pulling to one side, it is necessary to clearly identify the cause of the pulling condition. Frequently, pulling to one side is diagnosed as a wheel alignment concern. However, the actual cause may be related to the lateral force generated by the tires, vehicle damage, road crown or worn components. Performing a wheel alignment when tire force is the cause could result in the wheel alignment being set at a value outside of specifications. This could then cause other problems such as uneven tire wear, etc. A customer may notice a pull to the left when in the left lanes of travel and notice a pull to the right or no pull when traveling in the right lanes of travel on the very same section of roadway. This road crown effect is environmental and cannot be corrected with suspension adjustments or any other wheel or tire modification discussed in this bulletin.
Every Toyota Avalon model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.