2014 Toyota Avalon

Recalls

4 recalls name the 2014 Toyota Avalon. Newest first.

• Air bags › Air bag/restraint control module

  Jan 17, 2020NHTSA 20V0240002,891,976 vehicles

  Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2011-2019 Corolla, 2011-2013 Matrix, 2012-2018 Avalon, and 2013-2018 Avalon Hybrid vehicles. During certain crashes, the air bag electronic control unit (ECU) may malfunction, possibly disabling the deployment of the air bags and/or seat belt pretensioners.

  Risk and remedy

  Risk

  In the event of a crash, air bags and/or seat belt pretensioners that do not deploy as intended may increase the risk of injury.

  Remedy

  Toyota will notify owners, and dealers will inspect the ECU and install a noise filter between the air bag control module and its wire harness, as necessary, free of charge. Owners were notified of the safety risk beginning March 2, 2020. A second letter notifying owners of the remedy repair will be mailed between March 16, 2020 and June 27, 2020. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's numbers for this recall are 20TB03, 20TA03 and 20TA05.

  Full recall details →

• Forward collision avoidance › Crash imminent braking

  Nov 3, 2015NHTSA 15V72800030,812 vehicles

  Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2013-2015 Avalon and Avalon Hybrid vehicles manufactured October 19, 2012 to October 27, 2015 and 2013-2015 Lexus ES350 and ES300h vehicles manufactured June 18, 2012 to July 6, 2015. The affected vehicles are equipped with a Pre-Collision System (PCS) as optional equipment.…

  Risk and remedy

  Risk

  A vehicle that unexpectedly brakes increases the risk of a crash.

  Remedy

  Toyota will notify owners, and dealers will replace certain PCS components, free of charge. The recall began on July 28, 2016. Owners may contact Toyota at 1-888-270-9371. Toyota's numbers for this campaign are F1V and F2E.

  Full recall details →

• Suspension › Front › Control arm › Lower arm

  Nov 7, 2014NHTSA 14V7150005,650 vehicles

  Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2014 Toyota Camry, Camry HV, Avalon, and Avalon HV vehicles equipped with 16-inch and 17-inch rims. In the affected vehicles, the left-side front suspension lower arm may have been incorrectly manufactured. As a result, the left side lower arm may not have enough clamping…

  Risk and remedy

  Risk

  Because of the insufficient clamping force, the lower arm may separate from the ball joint, increasing the risk of a crash.

  Remedy

  Toyota will notify owners, and dealers will replace the left side lower arm, free of charge. The recall began on December 12, 2014. Owners may contact Toyota customer service at 1-800-331-4331.

  Full recall details →

• Fuel system, gasoline › Delivery › Hoses, lines/piping, and fittings

  Sep 19, 2014NHTSA 14V57600015,872 vehicles

  Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2014 Toyota Avalon, Camry, Sienna, and Highlander and model year 2015 Lexus RX350 vehicles. Fuel may leak from the one of the fuel delivery pipes in the engine compartment.

  Risk and remedy

  Risk

  A fuel leak in the presence of an ignition source increases the risk of a fire.

  Remedy

  Toyota will notify owners, and dealers will replace any of the suspect fuel delivery pipes free of charge. The recall began November 17, 2014. Owners may contact Toyota customer service at 1-800-331-4331.

  Full recall details →

Owner complaints

What owners report most

1. Unknown or other21
2. Forward collision avoidance18
3. Structure12
4. Electrical system11
5. Visibility/wiper9
6. Air bags7
7. Steering6
8. Fuel/propulsion system6
9. Service brakes6
10. Seats5

Latest complaints

• Aug 27, 2025CA362,712 mi
  Electrical system › Instrument panel › Speedometer/odometer

  Odometer Fraud. The contact purchased a 2014 Toyota Avalon. The contact stated that the vehicle was driven to AAA Auto Repair facility and the contact was informed that there was a mileage discrepancy. The vehicle was a dealer sale. At the time of purchase the vehicle mileage was 93,326, and after AAA retrieved the Carfax Report, it was discovered that the mileage was 362,712.

• Nov 20, 2024OR
  Visibility/wiper

  Installed new Rainex wipers two days ago. Driving tonight in rain and the exterior of the windshield has a film on it that makes it difficult to see when the wipers cycle when near streetlights or when cars with headlighs on are approaching. Seems really dangerous.

• Aug 12, 2024NC
  Service brakes · Unknown or other · Vehicle speed control
  I was pulling into a parking spot when my car suddenly accelerated to a very high speed. I traveled over a curb, on some pavement, through some bushes, knocked down a light pole and miraculously came to a stop. My foot was pumping the brakes to no avail. My entire car was damaged but miraculously…

  I was pulling into a parking spot when my car suddenly accelerated to a very high speed. I traveled over a curb, on some pavement, through some bushes, knocked down a light pole and miraculously came to a stop. My foot was pumping the brakes to no avail. My entire car was damaged but miraculously no one was hurt. Car was towed to a mechanic who confirmed that the car accelerated with him as well. Front, back, underside, roof, tires and frames were all badly damaged.

• Jul 8, 2023CA
  Power train

  My 2014 Toyota Avalon transmission failed with only 98,000 miles on it. I have always maintained this car flawlessly. I got a check engine light 07/07/23 and immediately had it towed to a certified mechanic. Was told the car needs a transmission replacement.

• Apr 20, 2023CA96,917 mi
  Forward collision avoidance · Steering › Steering wheel /handle bar › Yaw/angle sensor
  The contact owns a 2014 Toyota Avalon. The contact stated while driving 50 MPH for 20 miles, the Forward Collision Avoidance warning light became illuminated. The vehicle was parked and then towed to the residence. The vehicle was taken to a dealer where it was diagnosed and determined that the…

  The contact owns a 2014 Toyota Avalon. The contact stated while driving 50 MPH for 20 miles, the Forward Collision Avoidance warning light became illuminated. The vehicle was parked and then towed to the residence. The vehicle was taken to a dealer where it was diagnosed and determined that the steering angle sensor needed to be replaced. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 96,917.

• Apr 1, 2023CA
  Visibility/wiper
  The rear window retractable sun visor motor/gears have failed. When this happens, it leaves the sun visor in the up position in the rear window at all times. This makes it very, very, hard to see anything out the rear window at night, also pretty hard when it's raining or cloudy out. I understand…

  The rear window retractable sun visor motor/gears have failed. When this happens, it leaves the sun visor in the up position in the rear window at all times. This makes it very, very, hard to see anything out the rear window at night, also pretty hard when it's raining or cloudy out. I understand this has happened to quite a lot of these cars and is a VERY expensive repair cost. I feel this is hazard that Toyota should bear the cost of fixing, because of the sheer amount of vehicles this has happened. Thank you for keeping us all informed and safe from these types of things!

• Mar 8, 2023FL
  Structure › Body · Unknown or other · Visibility/wiper

  Dash board is melting which causes it to get shiny which causes it to reflect onto the windshield. This reflection makes it very difficult to see other vehicles, road lines, and traffic direction sighns.

• Jul 16, 2022AL
  Lane departure › Blind spot detection · Structure › Body · Visibility/wiper

  The reflective trim on the interior of the vehicle creates pain for the eyes and is so high that it interferes with the ability of the driver to see out the front window.

• Mar 25, 2022MA
  Unknown or other
  The passenger side mirror failed. The mirror exploded into the passenger window with a loud sound while driving at 35 mph. No rock found impacting mirror, no bird found at impact point, no dead animal found at impact point. If passenger window had not been up then mirror remains would have…

  The passenger side mirror failed. The mirror exploded into the passenger window with a loud sound while driving at 35 mph. No rock found impacting mirror, no bird found at impact point, no dead animal found at impact point. If passenger window had not been up then mirror remains would have entered the car cabin. The mirror has been replaced and is not available for inspection. The problem has not been reproduced or confirmed by a dealer or independent service center to my knowledge. The component has not been inspected by the manufacturer, police, insurance representatives or others. There were no warning lamps, messages or other symptoms of a problem prior to the failure. The problem occurred on March 22nd, 2022 at 10:30 AM eastern time zone approximately.

• Dec 10, 2021CA
  Service brakes
  Multiple warning lights suddenly appeared on the dash while stopped at a traffic signal. (Photo attached) Note: the photo does not show the red "PCS" light which was flashing. I was able to get off the road safely although the brakes did not feel normal. Had the car towed to Capitol Toyota in San…

  Multiple warning lights suddenly appeared on the dash while stopped at a traffic signal. (Photo attached) Note: the photo does not show the red "PCS" light which was flashing. I was able to get off the road safely although the brakes did not feel normal. Had the car towed to Capitol Toyota in San Jose the following morning for repair. They diagnosed the problem as a failure in the Master Cylinder Booster Unit and replaced it. Note: the attached invoice misstates the issue as "check engine light" which is incorrect.

• Sep 27, 2021OK
  Service brakes
  My Avalon is trying to kill me. I promise I have done nothing wrong! When going down the highway at 85mph I have had people cut in front of me. When pushing on the brakes to avoid collision, the brakes lock up and do not release for about 5 seconds. Naturally, this is quite unnerving for myself…

  My Avalon is trying to kill me. I promise I have done nothing wrong! When going down the highway at 85mph I have had people cut in front of me. When pushing on the brakes to avoid collision, the brakes lock up and do not release for about 5 seconds. Naturally, this is quite unnerving for myself, passengers as cars that scatter around me when the Avalon takes control --- slamming on the brakes --- and wont hand control back until it has caused quite a mess. This has happened three times now and no one can tell me what is wrong. I am told to get a brake job at the Toyota dealership even though the pads still have plenty of life.

• Apr 26, 2021GA45,000 mi
  Seats › Front assembly › Power adjust
  Tl*he contact owns a 2014 toyota avalon. The contact stated that the front passenger's side control casing for the electronic adjustable seats loosened and detached. The vehicle was taken to savannah toyota (11101 abercorn st, savannah, ga 31419) who replaced the casing however, the failure…

  Tl*he contact owns a 2014 toyota avalon. The contact stated that the front passenger's side control casing for the electronic adjustable seats loosened and detached. The vehicle was taken to savannah toyota (11101 abercorn st, savannah, ga 31419) who replaced the casing however, the failure recurred. The cause of the failure was not yet determined. The manufacturer was notified of the failure. The failure mileage was 45,000.

• Apr 5, 2021NY75,000 miCrash
  Service brakes
  TL* the contact owns a 2014 toyota avalon . The contact stated that while driving at various low speeds, light pressure was applied to the brake pedal and the vehicle inadvertently accelerated. The contact stated that there were four incidents of unexplained acceleration when the brake pedal was…

  TL* the contact owns a 2014 toyota avalon . The contact stated that while driving at various low speeds, light pressure was applied to the brake pedal and the vehicle inadvertently accelerated. The contact stated that there were four incidents of unexplained acceleration when the brake pedal was applied. The fourth incident resulted in a collision when the contact's wife was pulling into a parking space and applied light pressure onto the brake pedal, when the vehicle suddenly accelerated and hit another parked vehicle in the parking space ahead. No medical treatment was required. No police report was filed. The vehicle was towed to lia toyota of rockland (618 ny-303, blauvelt, ny 10913) where a diagnostic test and a test drive was performed and informed the contact that there was nothing wrong with the vehicle. The manufacturer was notified of the failure and a case was opened. The manufacturer had a third-party test drive and diagnosis the vehicle however, the failure could not be replicated. the failure mileage was 75,000.

• Mar 1, 2021CA280,000 mi
  Exterior lighting
  From the time frame of 2017 til the present, the headlamps on the vehicle would burn out for no apparent reason. Each time I replace them, they would last for about 4 to 6 months and then they would burn out again. Sometimes either one would burn, left or right, and twice I've had both go out at…

  From the time frame of 2017 til the present, the headlamps on the vehicle would burn out for no apparent reason. Each time I replace them, they would last for about 4 to 6 months and then they would burn out again. Sometimes either one would burn, left or right, and twice I've had both go out at the same time. I don't understand what IS causing the head lamps to burn out. I've replaced them each time, and in counting I have replaced them at least 10 times since 2017. This IS totally unusual compared to my other two cars where I've never once had to replace the headlamps on these. It happens when the vehicle IS being driven and other times when the lights are turned on before driving. Today (march 1, 2021) IS has happened again, and this time the driver side lamp went out for no apparent reason.

• Feb 28, 2021TX60,000 mi
  Unknown or other

  The toyota avalon has a reoccurring issue with the sunshade in the rear view window breaking and staying in the up position. There does not appear to be a function to keep the sunshade in the down/stored state. This creates a potentially hazardous visibility issue when trying to back up the car and/or at night when driving.

• Jul 15, 2020MD41,000 mi
  Visibility/wiper

  The rear window shade must stay in the up position or makes a very loud noise when vehicle IS I placed in reverse. Therefore, the shade has to stay in the up position, which makes night driving hazardous due to lack of rear vision. Very expensive repair and many toyota's have this problems for many years models according to internet. Needs a recall for safety.

• Jul 10, 2020TX10,014 mi
  Visibility › Sun/moon roof assembly
  TL* the contact owned a 2014 toyota avalon. The contact stated that during inclement weather, water leaked into the vehicle from the sun roof. Additionally, the contact lost the keys for the vehicle and was unable to enter the vehicle. The vehicle was towed to fred haas toyota country, 22435…

  TL* the contact owned a 2014 toyota avalon. The contact stated that during inclement weather, water leaked into the vehicle from the sun roof. Additionally, the contact lost the keys for the vehicle and was unable to enter the vehicle. The vehicle was towed to fred haas toyota country, 22435 tx-249, houston, tx 77070, but was not diagnosed nor repaired. The insurance company deemed the vehicle a total loss due to water damage. The manufacturer was not made aware of the failure. The failure mileage was approximately 10,014.

• Mar 20, 2020NY
  Air bags
  TL* the contact owns a 2014 toyota avalon. The contact received notification of nhtsa campaign number: 20v024000 (air bags) however, the part needed for the recall repair was not available. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The…

  TL* the contact owns a 2014 toyota avalon. The contact received notification of nhtsa campaign number: 20v024000 (air bags) however, the part needed for the recall repair was not available. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The vehicle was not taken to a dealer. The manufacturer was made aware of the issue and provided a case number. The contact had not experienced a failure. Vin tool confirms parts not available. *js

• Feb 28, 2020FL35,000 mi
  Seats · Structure › Body · Unknown or other

  All leather areas are sticky and difficult to use in the cabin. the dash, all covers, shift nob, center console, and steering wheel. this makes it very difficult to operate the vehicle where everywhere you touch IS sticky. it also has an odor and mold/mildew smell. toyota refuses to repair.

• Jan 25, 2020IL85,000 miCrash2 injuries
  Air bags
  On august 17, 2018 I was traveling westbound on il route 83 and I entered an intersection at il route 83 and torrance avenue at lynwood, il on a green traffic signal. a driver without a drivers license was traveling south on torrance avenue and entered the intersection on a red signal. I applied…

  On august 17, 2018 I was traveling westbound on il route 83 and I entered an intersection at il route 83 and torrance avenue at lynwood, il on a green traffic signal. a driver without a drivers license was traveling south on torrance avenue and entered the intersection on a red signal. I applied the brakes on my car but was unable to stop and my car hit the other drivers car in the side. the airbags in my car did not deploy.

• Jan 15, 2020CA42,400 mi
  Unknown or other
  Rear headliner to vehicle IS becoming detached from interior roof. This IS appearing at rear windshield area which IS compromising inhibiting the view, safety issue. Vehicle has 42,400 miles but over a year out of warranty. This appeared in december 2019. Should not of happened to a vehicle of this…

  Rear headliner to vehicle IS becoming detached from interior roof. This IS appearing at rear windshield area which IS compromising inhibiting the view, safety issue. Vehicle has 42,400 miles but over a year out of warranty. This appeared in december 2019. Should not of happened to a vehicle of this age/miles. toyota has said this will be a one time fix.should an accident occur if this happens again because of inability to see out of rear window, an attorney will be contacted for a lawsuit against toyota as I've read of other car with exact same defect

• Dec 16, 2019GA95,000 mi
  Fuel/propulsion system
  I have 95000 miles on my toyota avalon limited hybrid. while driving down the road it just quit - dead stop (very dangerous) and, had it not been a hybrid, I would not have been able to get it off of the interstate. turns out that the fuel pump stopped working with no warning. my last avalon…

  I have 95000 miles on my toyota avalon limited hybrid. while driving down the road it just quit - dead stop (very dangerous) and, had it not been a hybrid, I would not have been able to get it off of the interstate. turns out that the fuel pump stopped working with no warning. my last avalon went almost 300,000 miles on the same fuel pump. the pump, in my opinion, IS faulty but out of warranty. toyota IS charging over $1,000 to fix it. I tried to get toyota management contact information (district mgr.) from the dealership but they would not supply it in order for me to draw attention to toyota of the premature failure of a key component of the car. I called toyota headquarters, got the same response and felt like they could care less that there may be a deficiency in their components. this IS a serious safety issue. I have seen online others that have had this early failure of the fuel pump. toyota needs to look into this life threatening problem and they need to issue a tsb on it and perform the work at cost vs making money on something that could kill me and my family members. I still can get over their lack of concern.

• Oct 11, 2019TX82,250 mi1 injury
  Visibility/wiper
  I have a rear sunshade on this 2014 avalon limited version that was working fine until I decided to park my car outside in the hot summer in houston. The automatic rear sunshade stopped working and IS now stuck in the up position. Now it IS very difficult to drive this vehicle at night because the…

  I have a rear sunshade on this 2014 avalon limited version that was working fine until I decided to park my car outside in the hot summer in houston. The automatic rear sunshade stopped working and IS now stuck in the up position. Now it IS very difficult to drive this vehicle at night because the visibility IS very poor at night as a result of the shade stuck in the up position. There IS no other way to manually disengage the shade. I am unable to reverse at night. Very inconvenient. Please help.

• Oct 10, 2019FL75,637 mi
  Electrical system

  Pre collosion system warning light came on and took the vehicle to the toyota dealer and was told they needed to replace a computer in the system at a cost of over $1000. Which was not covered by the warranty or my extended warranty.

• Aug 1, 2019VA65,900 mi
  Unknown or other
  Pre-collision system (pcs). my vehicle IS having the issues identified in nhtsa campaign number: 15v728000. the dealership looked but didn't do anything more than attempt to recreate. they did say, the problem IS most likely the pcs misreading objects on the road, which IS what your recall…

  Pre-collision system (pcs). my vehicle IS having the issues identified in nhtsa campaign number: 15v728000. the dealership looked but didn't do anything more than attempt to recreate. they did say, the problem IS most likely the pcs misreading objects on the road, which IS what your recall notice states. can you please include my vehicle in this recall. it IS dangerous for this warning system to activate, falsely notifying of emergency when there IS none. I purchase this vehicle on 5/3/2019 as a toyota certified used car. Within days of purchasing I began having this pcs warning light and beeping going off and the break light coming on. the breaking system has not automatically been engaged but I am very uncomfortable when I drive. at best, it IS a huge distraction to the driver

Defect investigations

NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.

• Electrical overstress

  EA19001Opened Apr 19, 2019Closed Sep 19, 2024Recall 20V024
  The Office of Defects Investigation (ODI) opened this investigation to determine if the failure of airbags to deploy during severe crashes, in certain vehicles, was the result of a safety related defect.  During the investigation a complex failure was studied that can result in non-deployment of subject vehicle air…

  The Office of Defects Investigation (ODI) opened this investigation to determine if the failure of airbags to deploy during severe crashes, in certain vehicles, was the result of a safety related defect.  During the investigation a complex failure was studied that can result in non-deployment of subject vehicle air bags and other restraint system devices in severe crash events. The subject vehicles may be equipped with an airbag control unit (ACU) for the supplemental restraint system (SRS) Electronic Control Unit (ECU) manufactured by ZF-TRW.  The ECU receives signals from crash sensors mounted in the vehicle and deploys the vehicle air bags and seat belt pretensioners in accordance with manufacturer design specifications.  The ECU in the subject vehicles contains a model DS84 application-specific integrated circuit (ASIC) which controls the communication of the crash sensor signal, firing commands (i.e., when to deploy the airbag(s) and/or pretensioners), and fault information (e.g., diagnostic trouble codes). In September 2016, FCA announced recall 16V-668 for certain model year (MY) 2010 to 2014 Chrysler, Dodge and Jeep products manufactured with the subject ZF-TRW ACU.  In this recall, FCA discussed an EOS condition that resulted in a failure of the subject DS84 ASIC, which caused air bag non-deployment.  FCA noted that the defect condition had only been observed in vehicles equipped with sensor harnessing routed across the front of the vehicle.  Other FCA vehicles that also used the subject ACU, but were not equipped with cross-car harnessing, had not experienced EOS failures, despite similar time in service. During the course of this investigation, ODI sent two separate Information Request (IR) letters to six vehicle manufactures (including FCA, Hyundai, Honda, Kia, Mitsubishi, and Toyota) and one IR letter to ZF-TRW.  These IR letters resulted in ODI receiving comprehensive data from these manufacturers and suppliers. Studies of this data found that the DS84 ASIC does not have sufficient protection against negative electrical transients or electrical overstress (“EOS”) that can be generated in certain severe crashes.  An electrical transient occurs when the electrical power supplied to a circuit changes momentarily over a short duration of time.   In these severe crash cases, the crash sensors and other powered wiring can be damaged and short circuited so as to create a negative electrical transient of sufficient intensity and duration (that are outside the vehicle manufacturer's specification) to damage the ASIC before the restraint device deployment signal is received by the SRS ECU.  This damaged signal can lead to incomplete or nondeployment of the air bags and/or pretensioners.  Airbag non-deployment and/or lack of pretensioner operation can increase the risk or severity of injury in a crash.A total of 8 fatalities and 14 injuries were associated with known EOS events. The common element in all investigated manufacturers vehicles is the SRS ECU containing a DS84 ASIC manufactured by ZF-TRW.  The risk associated with the ASIC is equally shared among all OEMS involved in the investigation.  The actual real-world risk can be mitigated by other factors which were assessed by ODI during this investigation. The first mitigating factor involves protections built into the ACU design which protect the DS84 ASIC from damage.  There are multiple strategies and levels of protection employed by different OEMs that provide effective EOS mitigation.  The two most common strategies at the ACU level are circuit protection diodes on the remote senor signal lines, and current limiting resistors that protect critical components. The second mitigating factor is found at the vehicle level and involves the location and routing of the wires leading from the crash sensors to the SRS ECU.  If the wires are well protected in a crash and are not routed with other power wires carrying large currents, the risk for an EOS event is significantly reduced or eliminated. These design specific factors combine to produce a spectrum of risk for the vehicles equipped with ACUs using the DS84 ASIC.  Given the many of years of field exposure, it is possible to divide the subject population into two groups; vehicles which have experienced EOS events, and vehicles which have not experienced EOS field events. Four of the six OEMs involved in this investigation have experienced EOS field events on at least one of their models equipped with a DS84 ASIC.  All vehicle models (including the Toyota models identified in the Failure Report Summary of the opening resume for this investigation) with field events have been recalled.  In an abundance of caution, ODI kept this investigation open five years to monitor field performance and did not identify any field events on vehicles not included in existing safety recalls. Given the spectrum of risk identified in this investigation and that all vehicles with a demonstrated unreasonable risk have been recalled, ODI is closing this investigation. ODI is closing this investigation with the following manufacturer safety recalls: 16V-668, 18E-043, 18V-137, 18V-363, and 20V-024.  With the recall actions taken by the subject vehicle and equipment manufacturers, this investigation is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exists on other model or model year vehicles outside of the recall scopes. The agency reserves the right to take further action if warranted by the circumstances.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
• 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
• 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
• 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
• 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
• 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
• 10249321DP: On November 28, 2023, a class action settlement of claims for certain airbag control units was finally approved by the federal court. The settlement includes Toyota?s agreement to provide an Extended New Parts Warranty for parts installed under Safety Recall 20TA03 and Safety Recall 20TA05. The purpose of this Extended New Parts Warranty letter is to help clarify how to administer this coverage in accordance with the settlement.
• 10244115TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks
• 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
• 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
• 10230369DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10230368DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10230367DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
• 10227919DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10227918DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
• 10227916DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
• 10227912DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
• 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
• 10224108TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
• 10220183TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
• 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
• 10220158DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
• 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
• 10211828DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.

Every Toyota Avalon model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.