2008 Toyota Avalon
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Avalon › 2008
These records cover every 2008 Toyota Avalon. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
6 recalls name the 2008 Toyota Avalon. Newest first.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010…
Risk and remedy
Risk
If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
Remedy
SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion…
Risk and remedy
Risk
Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
Remedy
SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.
Gulf states toyota IS recalling certain model year 2005-2010 vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold between september 1, 2005 and june 2, 2008 without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
This does not meet the standard requirements.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. Dealers will also correct the owner's manual. the safety recall began on may 27, 2010. owners may contact gulf states toyota at 713-580-3300.
Southeast toyota IS recalling certain model year 2005-2011 passenger vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
A driver may overload a vehicle which may increase the risk of a crash.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. the safety recall began on may 27, 2010. owners may contact southeast toyota at 1-800-301-6859.
Toyota IS recalling certain model year 2005-2010 avalon, model year 2007-2010 camry, model year 2009-2010 corolla, corolla matrix, RAV4, model year 2010 highlander, model year 2008-2010 sequoia, and model year 2007-2010 tundra vehicles. due to the manner in which the friction lever interacts with the sliding surface of the accelerator pedal inside the…
Risk and remedy
Risk
The accelerator pedal may become hard to depress, slow to return to idle, or, in the worst case, mechanically stuck in a partially depressed position, increasing the risk of a crash.
Remedy
Dealers will install a reinforcement bar in the accelerator pedal which will allow the pedal to operate smoothly. gm will notify owners for the pontiac vibe please see 10v-018. this service will be performed free of charge. the safety recall IS expected to begin on february 5, 2010 and will be completed on march 15, 2010. owners may contact toyota at 1-800-331-4331.
Toyota IS recalling certain model year 2004-2010 passenger vehicles. the accelerator pedal can get stuck in the wide open position due to its being trapped by an unsecured or incompatible driver's floor mat.
Risk and remedy
Risk
A stuck open accelerator pedal may result in very high vehicle speeds and make it difficult to stop the vehicle, which could cause a crash, serious injury or death.
Remedy
Toyota filed an amended defect report on november 25, 2009, stating that dealers will modify the accelerator pedal and, on certain vehicles, alter the shape of the floor surface under the pedal. these changes address the risk of pedal entrapment due to interference with the floor mat. redesigned accelerator pedals will become available beginning in april 2010 and dealers will replace any modified pedal with the new pedal if desired. also, dealers will replace any genuine toyota or lexus all-weather floor mats with redesigned all-weather mats, or repurchase the previous mats from owners who do not want the new ones. additionally, software modifications will be installed on camry, avalon and lexus ES 350, IS 350 and IS 250 models that will ensure that the brake overrides the accelerator in the event both brake and accelerator pedals are applied. toyota will begin mailing letters to owners on december 31, 2009. owners may contact toyota at 1-800-331-4331, lexus at 1-800-255-3987.
Owner complaints
349 complaints23 involved a crash4 involved a fire15 injuries
What owners report most
Latest complaints
- Power train
I have an 08 Avalon xls and was driving and out of no where it started to shudder and it happened as I was bending a curve. I almost ran off the road. No indicators came on my dash! Because I am mechanically inclined I do know a little about vehicles! So I pulled to inspect the bottom of the…
I have an 08 Avalon xls and was driving and out of no where it started to shudder and it happened as I was bending a curve. I almost ran off the road. No indicators came on my dash! Because I am mechanically inclined I do know a little about vehicles! So I pulled to inspect the bottom of the transmission pan was wet! And due to the seal transmission there was no way for me to check the fluid! I believe the shudder could be from the torque converter or transmission! I took the vehicle to a friend shop and was told how to add the transmission fluid! And end up putting in a whole court of transmission fluid in before it started to show coming out where it’s supposed to be checked! By not being able to check the transmission fluid and with the shudder like it did it could have caused an accident! I still don’t know what the problem is due to the lack of money to be able to take it to a dealer to find out the true cause! And now my car shudder at 30mph and 45mph if I cruise up to the speed limit but if I accelerate faster then nothing!
- Exterior lighting
Because my instrument panel is alway illuminated, I was unaware that I was driving one night without my lights on. Now I know why I see more cars at night without their lights. Manufacturers need to fix this problem. Older cars would not turn on the panel lights if the headlights weren't on. You would think this would be an easy technology fix with since we have self driving cars now.
- Electrical system · Exterior lighting · Visibility/wiper
OEM high beam bulbs continuously explode. I’m not saying they just burn out, these bulbs shatter, and send shards of glass on the inside of the headlamp housing. I believe it’s a big safety risk, because for me, it happened while I was driving late at night in the dark where there are deer nearby.…
OEM high beam bulbs continuously explode. I’m not saying they just burn out, these bulbs shatter, and send shards of glass on the inside of the headlamp housing. I believe it’s a big safety risk, because for me, it happened while I was driving late at night in the dark where there are deer nearby. Brights are essential to see far and when you’re driving through hills, going up a hill you need your brights to extend higher than your normal lights do. This is a commonly complained about problem for the 2008-2010 models of this Toyota Avalon. Toyota has issued a technical service bulletin back in 2011, but it is a major defect and I believe it should be fixed regardless of whether a customer pays for a warranty or not. A mechanic told me also that they are not sure why Toyota has not warrantied vehicles with this issue. The solution is replacing the headlight housing. So there is clearly a material defect, and I believe it affects safety. Vehicles are required to have high beam headlights for a reason, and the high beams on this vehicle burn out commonly on certain vehicles, and replacing bulbs does NOT solve the problem. It is a very expensive repair as well. What kind of car manufacturer doesn’t recall or acknowledge a material defect or design flaw in such a crucial safety feature or a vehicle such as headlights? It’s an expensive, annoying, and dangerous issue that continues to happen. There are so many complaints about this high beam issue for the 2008 year. In my mind this really reduces Toyotas reputation and credibility since they did not and will not recall these headlights. We just have to deal with their faulty design. Fix your mistakes instead of making customers foot the bill for your poor craftsmanship. This is pathetic.
- Steering
The telescopic steering wheel lever comes loose which will cause the wheel to lurch forward if the brakes are pushed in hard. This could be dangerous. This has happened twice in 2 months.
- Air bags
Car was rear ended by semi truck, crushed trunk into vehicle rear seat. Car was the pushed forward into truck in front crushing right fender. Pelvic fracture in right rear passenger. Air Bags did NOT DEPLOY.
- Visibility/wiper
This car has a rear window shade that started going up on its on when it is hot outside. I could not locate this feature in the owners manual. I did read that a safety feature for the shade is that when car is placed in reverse the shade is automatically closed. This feature has stopped working, in…
This car has a rear window shade that started going up on its on when it is hot outside. I could not locate this feature in the owners manual. I did read that a safety feature for the shade is that when car is placed in reverse the shade is automatically closed. This feature has stopped working, in fact the shade now will not even lower. I used to be able to manually assist the shade down while someone would press the switch but down it raises back up almost immediately. I checked with Google and apparently this is a common problem. I have finally pulled the fuse to keep the shade down permanently.
- Service brakes · Visibility/wiper
Power sunshade IS stuck in the up position blocking the back windshield and check engine light turns on which disables traction and stability control. These make the car dangerous to drive
- Visibility/wiper
Power rear sunshade gets stuck in up position causing visibility hazard at night
- Exterior lighting
2008 toyota avalon. Low beam on drivers side goes out intermittently. Have to turn headlights on/off quickly. Was pulled over by chp on highway, told him just had low beams bulbs replaced. He asked me to turn them off, then on and both lights were working. This was in spring 2018 approx 80,000…
2008 toyota avalon. Low beam on drivers side goes out intermittently. Have to turn headlights on/off quickly. Was pulled over by chp on highway, told him just had low beams bulbs replaced. He asked me to turn them off, then on and both lights were working. This was in spring 2018 approx 80,000 miles. Took to mechanic, they worked fine. Did not have a problem for about 6 months after that, now afraid to drive at night as it happens more frequently and afraid that lights will not come back on. So many of same complaints on forums. I emailed toyota and actually got a call back but gal stated they had no record of any complaints regarding low beam problems. She gave me a case #2008070658. Asked if I had taken it to dealer but they would charge for diagnosis, I told her I would not be doing that. My mechanic has referred me to another shop with a certified a toyota master mechanic, will see what he has to say. This IS a major safety problem to say the least and do not understand why toyota refuses to recognize it and step up to correct problem. This IS very dangerous and obviously I am not only one who IS very concerned.
- Steering
Tilt steering column lock does not stay in place and will drop down any time. the steering wheel can change position any time and my knee hits the locking lever.
- Electrical system · Exterior lighting
I have been pulled over numerous times due to having a headlight out. However it's never blown. Once I show the officer by turning the lights off for a few seconds then back on the light IS on. From reading many toyota forums and going to a toyota dealer, it IS a faulty wiring system and to repair…
I have been pulled over numerous times due to having a headlight out. However it's never blown. Once I show the officer by turning the lights off for a few seconds then back on the light IS on. From reading many toyota forums and going to a toyota dealer, it IS a faulty wiring system and to repair it will cost at least $1300.00 or more. it IS a hastle as well as a safety hazard. The light doesnt stay on once turning the lights off then on. within a few miles it goes off again and it IS constantly blowing the light bulbs. in the 3 years I have had my car I have replaced the lights at least 7 times. the light will always be off when I start my car with the remote starter and when I start it with the ignition if it's on, within a few miles of driving it goes off again.
- Unknown or other
Front dashboard IS cracking and IS still continuing. I've never had a vehicle do this. I've had a 97 black toyota camry up until a couple of years, and dash was perfect. My avalon IS garaged parked and garaged parked at work. I'm afraid IS going to effect the air bags, etc. And come out unexpectedly. I've attached photos. It's been a slow process which started a couple of years after I first purchased the car.
- Electrical system · Exterior lighting
From the day I purchased used vehicle in 2015, I've experienced headlights that flicker and go off only to be fully illuminated by turning off then back on. Mostly, it's the driver side and sometimes the passenger side; infrequently, both headlights are affected. I've searched the internet for a…
From the day I purchased used vehicle in 2015, I've experienced headlights that flicker and go off only to be fully illuminated by turning off then back on. Mostly, it's the driver side and sometimes the passenger side; infrequently, both headlights are affected. I've searched the internet for a solution and found hundreds of similar reports with 'solutions' ranging from simple few dollars to above $1000. My local dealer had the car on several different occasions...to no avail and was willing to 'fix' it for $1200. because of the number of similarly described on internet forums, I think that toyota should recall the vehicles if, for no other reason, than that this IS a significant safety issue.
- Electrical system · Exterior lighting
I have had continuous problems with either one or both front headlights going off randomly. this happens almost daily and I have taken the car to the shop numerous times. this IS a very dangerous problem as on occasion I do not even know that the lights are off. Additionally, I have been pulled…
I have had continuous problems with either one or both front headlights going off randomly. this happens almost daily and I have taken the car to the shop numerous times. this IS a very dangerous problem as on occasion I do not even know that the lights are off. Additionally, I have been pulled over by the police and issued a warning with the excepectation that the problem will be fixed. This poses another great concern as the mechanic has not been able to diagnose the issue, therefore, it cannot be fixed. the mechanic has also reached out to the dealer as well as other mechanics along with conducting his own research all to no avail. during my research, I discovered numerous compliants stating the exact same problems that I am experiencing, also with no resolve or remedy. I am shocked that toyota would place people in such danger and not take any action to rectify this very significant problem. I would appreciate any help you may be able to provide.
- Electrical system · Exterior lighting
Car driver side low beam headlight goes out randomly and unexpectedly .
- Exterior lighting
TL* the contact owns a 2008 toyota avalon. While driving the vehicle, the headlights went out several times. The contact researched the failure online and found numerous complaints with the vehicle. The manufacturer stated that they were aware of the headlight failure and issued an extended…
TL* the contact owns a 2008 toyota avalon. While driving the vehicle, the headlights went out several times. The contact researched the failure online and found numerous complaints with the vehicle. The manufacturer stated that they were aware of the headlight failure and issued an extended warranty of up to 75,000 miles. The contact's vehicle exceeded the mileage requirement; therefore, the manufacturer could not assist. The contact was advised to take the vehicle to a dealer to be repaired at his expense. The dealer was not contacted. The vehicle was not diagnosed or repaired. The failure mileage was 93,000.
- Air bags
TL* the contact owned a 2008 toyota avalon. After leaving the dentist and driving approximately 65 mph, the contact fell asleep at the wheel. When the contact woke up, he realized the vehicle was headed towards the median. To avoid the median, the contact turned the steering wheel and drove into a…
TL* the contact owned a 2008 toyota avalon. After leaving the dentist and driving approximately 65 mph, the contact fell asleep at the wheel. When the contact woke up, he realized the vehicle was headed towards the median. To avoid the median, the contact turned the steering wheel and drove into a ditch on the side of the road. The vehicle flipped over several times, but no air bags deployed. The vehicle was towed and deemed totaled. The contact received injuries to the neck, elbow, leg, and head. Medical attention was needed. A police report was filed. The manufacturer and dealer were not aware of the failure. The cause of the failure was not determined. The approximate failure mileage was 130,000.
- Structure › Body
TL* the contact owns a 2008 toyota avalon. The contact noticed that the dashboard was cracking and melting. The vehicle was taken to elk grove toyota (9640 w stockton blvd, elk grove, ca 95757, (916) 405-8000) where the general manager observed the dashboard, but could not determine the cause of…
TL* the contact owns a 2008 toyota avalon. The contact noticed that the dashboard was cracking and melting. The vehicle was taken to elk grove toyota (9640 w stockton blvd, elk grove, ca 95757, (916) 405-8000) where the general manager observed the dashboard, but could not determine the cause of the failure. The vehicle was not diagnosed or repaired. The contact called the toyota customer service experience center and was informed that the vehicle was out of warranty. The contact was provided case number: 1909100691. The approximate failure mileage was 27,000.
- Exterior lighting
I had my car inspected in december 2018 and was told that my high beams were out. I had the bulbs replaced and just recently had my lights inspected. changing the bulbs did not correct the problem and my high beams are still not working!
- Electrical system
Headlights and fog lights go off while traveling. May or may not come back on when switch IS reset. They go off unpredictably and may be at a very inopportune time causing collision.
- Steering › Rack and pinion · Wheels
TL* the contact owns a 2008 toyota avalon. While driving 50-60 mph, the vehicle shook drastically without warning and would not stop. There were no warning indicators illuminated. The vehicle was taken to an independent mechanic who diagnosed that a front end alignment was needed. The vehicle was…
TL* the contact owns a 2008 toyota avalon. While driving 50-60 mph, the vehicle shook drastically without warning and would not stop. There were no warning indicators illuminated. The vehicle was taken to an independent mechanic who diagnosed that a front end alignment was needed. The vehicle was repaired, but the failure recurred more than twice. Due to the failure, a new rack and pinion needed to be installed. The dealer and manufacturer were not made aware of the failure. The failure mileage was 102,000.
- Exterior lighting · Service brakes
On november 2018 I noticed that my rear deck mounted brake light was out. I thought it was a bulb but the very next day it was back on again. this continued for about a week so I took it to the toyota dealership and they told me it would be about $400 to take off the rear deck just to see what the…
On november 2018 I noticed that my rear deck mounted brake light was out. I thought it was a bulb but the very next day it was back on again. this continued for about a week so I took it to the toyota dealership and they told me it would be about $400 to take off the rear deck just to see what the actual problem was. I have seen multiple avalon's with this same unsafe issue. The vehicle also will not pass state safety inspections with this issue.i think an investigation should be conducted on this highly unsafe issue.
- Electrical system
Rear sun shed break very fast makes a lot of noise. It can't be disabled without causing other problem such as engine light on and cruz control disabled and all kind of sensors that need to be replaced. Its very dangers and frustrating
- Exterior lighting
Low beam lights randomly go out after being on for a short time. I've been battling this issue since 2013 when I bought the car. The dealer says my low beam headlights are burnt out. I can turn the headlight switch off and back on quickly and the affected light comes back on. I do this several…
Low beam lights randomly go out after being on for a short time. I've been battling this issue since 2013 when I bought the car. The dealer says my low beam headlights are burnt out. I can turn the headlight switch off and back on quickly and the affected light comes back on. I do this several times a day when it IS dark out. I even had small led lights mounted into my dash and wired into each low beam bulb so I can see if one goes out while driving in town at night as it can be difficult to know if one when out.
- Exterior lighting
While driving straight ahead at night on a highway the high beams suddenly went out and would not go on again. I switched to low beams. I later learned from a mechanic that there IS a design flaw or inferior microprocessor controlling the headlights and that the low beams could also suddenly go out…
While driving straight ahead at night on a highway the high beams suddenly went out and would not go on again. I switched to low beams. I later learned from a mechanic that there IS a design flaw or inferior microprocessor controlling the headlights and that the low beams could also suddenly go out while in motion. This IS a severe safety issue. The toyota corporation will not stand by their product and have referred me to a toyota dealer that wants over $2,000.00 to fix the safety issue. There should be a recall on this. I believe it only affects the 2008 avalon models. There are even several articles on the internet relating to this problem. I have nothing to download as I did not get a written estimate, only a telephone quote, from the toyota dealer.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10230369DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10230368DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10230367DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
- 10227919DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10227918DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
- 10227916DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
- 10227912DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10220158DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10211828DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
- 10211827TI: Technical Instructions Customer Support Program ZKG Multiple Models and Model Years Vehicles Painted with Blizzard Pearl (070) or Super White (040) Paint Color Coverage for Peeling of Factory-Applied Paint
- 10211826CSP: Customer Support Program ZKG - Paint Repair Process Operation Flow Chart
- 10210376OBSOLETE NOTICE Month 09, 2022: This bulletin is now obsolete. Please see T-SB-0014-22.
- 10210375TSB: This Service Bulletin includes procedures to replace damaged or loose front carpet floor retainer(s) without replacing the carpet assembly. Follow the Repair Procedure in this bulletin to replace the loose or damaged carpet floor retainer(s).
Every Toyota Avalon model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.