2010 Ford Edge
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2010 Ford Edge. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
7 recalls name the 2010 Ford Edge. Newest first.
Ford Motor Company (Ford) is recalling certain 2007-2011 Ranger, 2006-2012 Fusion, Lincoln Zephyr, Lincoln MKZ, 2006-2011 Mercury Milan, 2007-2010 Ford Edge, and Lincoln MKX vehicles. The driver's side air bag inflator may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.
Remedy
Ford will notify owners, and dealers will replace the driver-side airbag inflator or module with an alternate one, free of charge. Owner notification letters were mailed on April 9, 2021 for the passenger side, and November 14, 2022 for the driver side. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S12.
Ford Motor Company (Ford) is recalling certain 2005-2014 Mustang, 2004-2011 Ranger, 2009-2011 Mercury Milan, 2006 Ford GT, 2008-2012 Fusion, 2007-2010 Edge and Lincoln MKX, and 2009-2010 Lincoln MKZ vehicles. These vehicles may be equipped with a driver or passenger frontal air bag inflator used as a replacement service part, that may explode due to…
Risk and remedy
Risk
In the event of a crash necessitating deployment of the frontal air bag, an inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Ford will notify owners, and dealers will inspect the driver and passenger air bag module, and replace either the module or the inflator, if necessary, free of charge. The recall began March 17, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S05.
Ford Motor Company (Ford) is recalling certain 2014 Ford Mustang vehicles sold, or ever registered, in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, Ford is…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicles until the repair has been performed. Ford will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began February 13, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall 19S01.
Ford Motor Company (Ford) is recalling certain 2013 Ford Mustang vehicles sold, or ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, Ford is recalling…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicles until the repair has been performed. Ford will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S01.
Bearing Technologies Ltd (Bearing) is recalling certain Duralast Wheel Spindles, part number DL930676K, sold as a service part for the front wheel hub spindle of 2007-2010 Ford Edge vehicles. The affected wheel spindles have wheel mounting studs with an oversized shoulder that can prevent the wheel from being installed correctly.
Risk and remedy
Risk
If the wheel is installed incorrectly, the wheel may vibrate or wobble, increasing the risk of a crash.
Remedy
Bearing will notify the distributors of the spindles. If the studs on a defective spindle are not loose, Bearing will replace the studs at no charge. If the studs on a defective spindle are loose, Bearing will replace the spindle assembly at no charge. Bearing will also pay shop labor for the remedy. The recall began on October 16, 2017. Owners may contact Bearing Technologies customer service at 1-800-597-3486 or visit www.recall17E053.com.
Ford Motor Company (Ford) is recalling certain model year 2007-2011 Ford Ranger vehicles, 2006-2011 Ford Fusion, Mercury Milan and Lincoln Zephyr/MKZ vehicles, 2007-2010 Ford Edge, Lincoln MKX vehicles, 2005-2006 Ford GT vehicles, and 2005-2011 Ford Mustang vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii…
Risk and remedy
Risk
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicles until the repair has been performed. Ford will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. Ford mailed interim letters informing owners that parts are not yet available on July 15, 2016. Owners will receive a second notice when remedy parts become available. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S01.
Ford Motor Company (Ford) is recalling certain model year 2009-2010 Ford Edge vehicles manufactured September 11, 2008, to July 1, 2010, and Lincoln MKX vehicles manufactured September 23, 2008, to July 1, 2010, originally sold in, or currently registered in, Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan…
Risk and remedy
Risk
A fuel leak in the presence of an ignition source increases the risk of a fire.
Remedy
Ford will notify owners, and dealers will inspect the vehicles and either clean and treat the fuel tank with a corrosion preventative or replace the tank, free of charge. The recall began on May 10, 2016. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 15S31.
Owner complaints
673 complaints28 involved a crash3 involved a fire17 injuries1 deaths
What owners report most
Latest complaints
- Service brakes
The known defective brake booster which failed suddenly has been confirmed as defective by ford dealers and its components failed resulting in catastrophic brake failure and not being able to stop. There were no warning lights or signs available it failed suddenly while driving also resulting in a…
The known defective brake booster which failed suddenly has been confirmed as defective by ford dealers and its components failed resulting in catastrophic brake failure and not being able to stop. There were no warning lights or signs available it failed suddenly while driving also resulting in a near accident. I called ford dealer and corporate who Informed me I had missed the 10 year year window for the defective and they would be unable to replace it.
- Air bags
I received an email saying I need to replace the airbag; I think it expired.
- Seat belts · Seats
The front driver seat belt has been fraying to the point that there’s only about 1/2” of belt left to hold it together. It’s frayed above the buckle so if I was to hit anything & depending on the belt to save my life I’m screwed bc it’ll just snap. I’ve contacted ford who refuses to replace it…
The front driver seat belt has been fraying to the point that there’s only about 1/2” of belt left to hold it together. It’s frayed above the buckle so if I was to hit anything & depending on the belt to save my life I’m screwed bc it’ll just snap. I’ve contacted ford who refuses to replace it under warranty bc it’s been over 6yrs which is wrong bc it is a genuine ford motor craft part and peoples safety and lives depend on the seatbelt to save lives. It shouldn’t only be under warranty for a limited amount of time if it’s an original ford part. So bc ford has discontinued all parts and belts for the front driver’s side I can’t find a replacement for under $200! So this is deadly and I’m not sure what led to this level of fraying other than the mechanical device it winds up in. I always wear my belt and never has it been in the door or anything so I’m not sure what caused this horrible problem but it’s even worse ford refuses to replace it. I drive a 2010 edge se fwd it has only 88k miles and has barely been driven and one owner. I’ve looked online and seen that a lot of fords have had recalled seat belts. I believe this needs to be a recall especially considering all the front driver’s seat belts on ford have been discontinued and they don’t offer any other brand of replacement. How can they expect to ensure the safety of the driver of the car if they don’t have a lifetime replacement warranty on the actual belt itself or even offer a replacement for a decent price or a replacement at all for that matter considering all have been discontinued that tells me they weren’t that secure to begin with if they aren’t even available.
- Air bags
I took my 2010 ford edge to have a air bag recall repaired. The air bag was fixed, the air bag light cleared. I drove about 3 miles home and the light reappeared, I checked the code and it was B2293-03 air bag fault. My wife called right away and told them the light came on and the car can't be…
I took my 2010 ford edge to have a air bag recall repaired. The air bag was fixed, the air bag light cleared. I drove about 3 miles home and the light reappeared, I checked the code and it was B2293-03 air bag fault. My wife called right away and told them the light came on and the car can't be inspected until it's clear. They told my wife it would be $200 to take a look at a repair they literally just took their hands off of. All I want is this safety feature fixed right without the $200 fee which is crazy when I just picked it up.
- Service brakes
There is a noise coming from the interior of my car, near the brakes that makes a high pitched noise and is causing the brake to feel a bit hard when pressed. It is believed that the brake booster has malfunctioned. There is a customer satisfaction program listed as 13N02 in regard to the extended warranty coverage for brake boosters. Is my vehicle eligible to be covered on this warranty?
- Steering
Hello, This is [XXX] [XXX] [XXX] . This vehicle has a shorted steer sensor part#8t4z-3f818-a. If traction control button is not turned off at start up, the vehicle will slam on the brakes and jurk the steering wheel while going around a curve. I took the car to Crossroads Ford for diagnosis.…
Hello, This is [XXX] [XXX] [XXX] . This vehicle has a shorted steer sensor part#8t4z-3f818-a. If traction control button is not turned off at start up, the vehicle will slam on the brakes and jurk the steering wheel while going around a curve. I took the car to Crossroads Ford for diagnosis. They inspected and stated it needed the steering angle sensor. I payed them $377.90 for the part to be ordered on 3/20/25. The part was suppose to be there 4/1/25. They never called, I called they stated it was still on order. Today I called again 4/29/25 and asked the parts manager where the part is. He stated it was Discontinued Product from ford and is not available. This is a required part for the vehicle to perform safely, I have checked all other means of order online all are discontinued. Please advise why Ford is being allowed to discontinue production and availability for part#8t4z-3f818-a. Thank You [XXX] no accident has occurred but could due to the erratic behavior of the vehicle traction control due to this faulty part. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Service brakes
The contact owns a 2010 Ford Edge. The contact stated that while driving at various speeds, the brake pedal was depressed and felt abnormally stiff. As a result, the vehicle failed to slow down as intended. The failure occurred on several occasions. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was 42,000.
- Service brakes
My brake power booster needs replacing urgently. There is currently a recall for 2010 Ford Edge (2010-2014 Edge & MKX Vehicles specifically). My Edge however is not included. I do not understand why. This is the recall I am referring to: [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Service brakes
The contact owns a 2010 Ford Edge. The contact stated while driving into an apartment complex parking lot, the brake pedal was depressed but felt stiff and failed to travel downward. The contact was unable to stop the vehicle. There was no warning light illuminated. The vehicle drove over the curb…
The contact owns a 2010 Ford Edge. The contact stated while driving into an apartment complex parking lot, the brake pedal was depressed but felt stiff and failed to travel downward. The contact was unable to stop the vehicle. There was no warning light illuminated. The vehicle drove over the curb, crashed into two HVAC units located in front of the apartment building, and the vehicle stopped. The contact was in shock and unintentionally turned off the vehicle while the vehicle was in drive(D). The air bags did not deploy. The contact sustained whiplash and trauma. The contact received assistance from emergency units but refused to be taken to the hospital. A police report was filed. A mobile mechanic diagnosed that the brake booster had failed and needed to be replaced. The contact stated that the front grill of the vehicle was damaged due to the collision. The vehicle was not repaired. The contact related the failure to an unknown recall. The manufacturer was notified of the failure, but no assistance was provided and transferred the contact to the NHTSA Hotline. The failure mileage was approximately 160,000.
- Engine and engine cooling › Cooling system › Pump
The contact owns a 2010 Ford Edge. The contact stated while driving 40 MPH, the engine started to overheat. The contact added coolant to the reservoir however, the contact became aware that coolant was leaking from the vehicle. There was no warning light illuminated. The vehicle was driven to an…
The contact owns a 2010 Ford Edge. The contact stated while driving 40 MPH, the engine started to overheat. The contact added coolant to the reservoir however, the contact became aware that coolant was leaking from the vehicle. There was no warning light illuminated. The vehicle was driven to an independent mechanic where it was diagnosed with water pump leaking failure. The local dealer was contacted; however, the vehicle was not repaired because the vehicle was not under recall. The manufacturer was not made aware of the failure. The failure mileage was approximately 210,000.
- Service brakes
Brake booster failed. This is an known problem with year and model. Ford says recall doesn't apply to vin.
- Service brakes
Brake Booster is faulty. I was told this is a known problem for the Ford Edge. A faulty brake booster is dangerous if not fixed asap. The cost to fix is 900 dollars. Since this is a known issue with brake booster it really should be a recall item. IMO
- Engine and engine cooling
The contact owns a 2010 Ford Edge. The contact had taken the vehicle to an independent mechanic, and it was discovered that there was coolant inside the oil. The vehicle was towed to another independent mechanic who confirmed the failure and informed the contact that the engine needed to be…
The contact owns a 2010 Ford Edge. The contact had taken the vehicle to an independent mechanic, and it was discovered that there was coolant inside the oil. The vehicle was towed to another independent mechanic who confirmed the failure and informed the contact that the engine needed to be replaced. The dealer was notified of the failure and provided and estimate for a diagnostic test however, the contact declined to have the vehicle diagnosed. The vehicle was towed to the residence where it remained. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline to report the failure. The vehicle was not repaired. The failure mileage was approximately 161,000.
- Service brakes, hydraulic
The contact owns a 2010 Ford Edge. The contact stated that while depressing the brake pedal, there was a slight resistance, causing the contact to apply more pressure while depressing the pedal. There were no warning lights illuminated. The vehicle was taken to the dealer who diagnosed that the…
The contact owns a 2010 Ford Edge. The contact stated that while depressing the brake pedal, there was a slight resistance, causing the contact to apply more pressure while depressing the pedal. There were no warning lights illuminated. The vehicle was taken to the dealer who diagnosed that the brake booster had failed. The mechanic informed the contact of the Technical Service Bulletin: 13N02 which was associated with the NHTSA ID Numbers: 10251228 (Service Brake, Hydraulic) and 10246076 (Service Brake, Hydraulic); and advised the contact check if the vehicle was included. The dealer was contacted and confirmed that the vehicle was not included in the TSB. The manufacturer was made aware of the failure and confirmed that the vehicle was not included in NHTSA ID Numbers: 10251228 (Service Brake, Hydraulic) or 10246076 (Service Brake, Hydraulic). The manufacturer referred the contact to the NHTSA Hotline to report the failure. The failure mileage was 150,000.
- Service brakes
I was driving my 2010 ford egde, when I noticed that it was taking longer to stop the vehicle. also, when I was applying the brakes, there was an air sound. it was like it was hissing. I knew somehting was wrong. I thought it was because I just had the front brakes replaced and that the…
I was driving my 2010 ford egde, when I noticed that it was taking longer to stop the vehicle. also, when I was applying the brakes, there was an air sound. it was like it was hissing. I knew somehting was wrong. I thought it was because I just had the front brakes replaced and that the mechanic may have forgotten to bleed the lines or that the vehicle was low on brake fluid. I went back to the mechainc and they checked it out again. they figured out that it was the brake booster that was faulty and that the part was inexpensive but the labor was high becuase of the amount of time it takes to fix it. I went online to see if there was a recall for the brake booster and there was for certain 2010 ford edges. when I typed in my vin, the recall did not come up. I called ford direct to see if my vehicle was included in the recall and they said that my vin was not. now mind you, the vehicle IS 14 years old, but it only had 107989 miles on it. so needless to say, I had to pay out of pocket to get it fixed. it cost 1255.26. that included the stop light switch that has to be replaced when replacing the brake booster. I don't understand why all of the 2010 ford edges weren't recalled because it seems that just about every one that owns one will have to replace this.
- Air bags
Vehicle is in St Thomas, United States Virgin Islands. Vehicle has two recalls for airbags due. Our local Ford dealership (Metro Motors) states they do not perform safety recalls on vehicles.
- Service brakes
The contact owns a 2010 Ford Edge. The contact stated that while driving at an undisclosed speed, the brake pedal was depressed, however, the vehicle failed to stop as intended. The contact stated that due to the failure, the contact's vehicle rear-ended the vehicle in front of the contact's…
The contact owns a 2010 Ford Edge. The contact stated that while driving at an undisclosed speed, the brake pedal was depressed, however, the vehicle failed to stop as intended. The contact stated that due to the failure, the contact's vehicle rear-ended the vehicle in front of the contact's vehicle. The contact stated that there was no damage to either. The contact stated no police report was filed. The vehicle was not diagnosed or repaired by an independent mechanic or the dealer. The manufacturer was made aware of the failure and a case was filed. The failure mileage was approximately 59,000.
- Service brakes · Structure › Frame and members · Vehicle speed control
The contact owns a 2010 Ford Edge. The contact stated that while his brother was driving at an undisclosed speed, the vehicle experienced unintended acceleration. During the failure, the braking system malfunctioned, causing the brake pedal to extend to the floorboard and the vehicle failed to stop…
The contact owns a 2010 Ford Edge. The contact stated that while his brother was driving at an undisclosed speed, the vehicle experienced unintended acceleration. During the failure, the braking system malfunctioned, causing the brake pedal to extend to the floorboard and the vehicle failed to stop immediately. The vehicle was taken to the local dealer who was unable to determine the cause of the failure. Additionally, while the vehicle was in for service it was discovered that the subframe was rusted. The vehicle was not yet repaired. The manufacturer was not yet contacted. The failure mileage was 114,116.
- Structure › Body
The car under carriage completely rusted out and cause a major failure in the middle of a major street. I informed ford of the problem by special mail and have not receive a reply. I took the car to the dealership where I bought the car. They said it would cost 8,000 for th repair and they did not…
The car under carriage completely rusted out and cause a major failure in the middle of a major street. I informed ford of the problem by special mail and have not receive a reply. I took the car to the dealership where I bought the car. They said it would cost 8,000 for th repair and they did not know if the complete problem would be fixed. Please help. [XXX] , [XXX] [XXX] . [XXX] . INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Service brakes
Brake booster leak. Very dangerous and expensive to fix!!!!
- Service brakes
Brake fail's due to leak in brake booster, brakes still work but extreme pressure on pedal required to stop car and extra time and distance required to stop or slow car. Car garaged entire life and only just turned 100K on odometer. This should be a recall in the interest of safety as many people…
Brake fail's due to leak in brake booster, brakes still work but extreme pressure on pedal required to stop car and extra time and distance required to stop or slow car. Car garaged entire life and only just turned 100K on odometer. This should be a recall in the interest of safety as many people have reported this and no action on ford's part to correct this dangerous situation. This has been talked about many times on internet.
- Service brakes · Steering
Power steering fluid leaking.Had hoses replaced,but problem still persist.No.2 Power brakes lost,pedal very hard. Very lucky ,not to hit car in front of me. Car is in shop,mechanic tells me it probablyneeds Power booster replaced. no warning signs.
- Service brakes, hydraulic
The contact owns a 2010 Ford Edge. The contact stated while driving at various speeds and depressing the brake pedal, the brake pedal made an abnormal airy sound, became spongy, and travelled down to the floorboard, and the vehicle responded. There was no warning light illuminated. The vehicle was…
The contact owns a 2010 Ford Edge. The contact stated while driving at various speeds and depressing the brake pedal, the brake pedal made an abnormal airy sound, became spongy, and travelled down to the floorboard, and the vehicle responded. There was no warning light illuminated. The vehicle was taken to the dealer, where it was diagnosed that the brake booster had failed and needed to be replaced. The dealer informed the contact that the vehicle was not covered under Ford Campaign Number: 13N02. The vehicle was not repaired. The manufacturer was notified of the failure and informed the contact that the vehicle was not covered due to the manufactured date. The failure mileage was approximately 142,000.
- Service brakes, hydraulic › Foundation components › Master cylinder
The contact owns a 2010 Ford Edge. The contact stated that while driving on multiple occasions at various speeds, she observed a hissing noise emanating near the brake pedal. Additionally, when the brake pedal was depressed, the brake pedal was firm, and the vehicle failed to stop as intended. The…
The contact owns a 2010 Ford Edge. The contact stated that while driving on multiple occasions at various speeds, she observed a hissing noise emanating near the brake pedal. Additionally, when the brake pedal was depressed, the brake pedal was firm, and the vehicle failed to stop as intended. The contact pumped the brake pedal and the vehicle rolled to a stop. The vehicle was towed to an independent mechanic where it was diagnosed that the brake master cylinder needed to be replaced. The vehicle was repaired but the failure reoccurred three hours later. The vehicle was taken to another independent mechanic where it was diagnosed that the power brake booster valve needed to be replaced. The vehicle was repaired. The manufacturer was notified of the failure. The failure mileage was approximately 98,000.
- Service brakes, hydraulic › Foundation components › Master cylinder · Traction control system
The contact owns a 2010 Ford Edge. The contact stated that while driving at approximately 35 MPH, the brake pedal became stiff. The brake pedal was depressed to the floorboard. The brake pedal was depressed; however, the vehicle was slow to respond. There was an abnormal whistling sound detected.…
The contact owns a 2010 Ford Edge. The contact stated that while driving at approximately 35 MPH, the brake pedal became stiff. The brake pedal was depressed to the floorboard. The brake pedal was depressed; however, the vehicle was slow to respond. There was an abnormal whistling sound detected. The ABS and traction control warning lights were illuminated. The wrench symbol was displayed. The contact was able to drive the vehicle to the residence. The vehicle was taken to an independent mechanic, who determined that the failure was due to the power brake booster master cylinder. The vehicle was not repaired. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was contacted and the contact was referred to the NHTSA Hotline. The failure mileage was approximately 192,000.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10254138All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
- 10251228Certain 2010-2014 Model Year Edge and MKX Vehicles - Extended Warranty Coverage on Brake Booster
- 10246076Certain 2010-2014 Model Year Edge and MKX Vehicles - Extended Warranty Coverage on Brake Booster
- 10240415Certain 2005-2014 Mustang, 2005-2006 GT, 2004-2011 Ranger, 2006-2012 Fusion and MKZ/Zephyr, 2006-2011 Milan, and 2007-2010 Edge & MKX Vehicles Driver & Passenger Airbag Module Quality Control Inspection REASON FOR THIS SUPPLEMENT Updated Ranger Technical Information to include images of a pass and fail airbag inflator inspection for 2007-2011 model years.
- 10235153For 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identification number (VIN) from a different vehicle. Most modules on these affected vehicles are VIN/vehicle specific and hardware variations between modules do exist. Swapping a module from a vehicle or ordering a module using a different vehicle/VIN can cause ineffective repairs and additional vehicle down time. Make sure all appropriate Workshop Manual (WSM) procedures are followed when diagnosing the condition prior to all module replacements and only order modules using the correct VIN.
- 10209374Certain 2005-2014 Mustang, 2005-2006 GT, 2004-2011 Ranger, 2006-2012 Fusion & MKZ/Zephyr, 2006-2011 Milan, and 2007-2010 Edge & MKX Vehicles Driver & Passenger Airbag Module Quality Control Inspection: Ford Motor Company has determined that some vehicles claimed by dealers as repaired under Takata Airbag Safety Recalls 15S21, 17S42, 18S02, 19S01, and 21S12 may not have received the claimed repairs. The propellant in certain Takata airbag inflators can experience an alteration over time with exposure to certain climate conditions. A combination of time, high temperature fluctuations, and humidity contribute to the degradation of the propellant in the inflators. This degradation can cause the propellant to burn too quickly, creating high pressure inside the inflator, and in extreme cases causing the inflator to rupture in the event of a crash necessitating airbag deployment. A ruptured inflator can send inflator parts toward vehicle occupants resulting in serious injury or death. Additional information regarding Takata recalls can be found at www.nhtsa.gov and www.safercar.gov.
- 10183756In some of the affected vehicles that are operated in high-corrosion environments associated with road salt use, moisture and salt may become trapped under the fuel tank mounting reinforcement brackets at the four corners where the fuel tank is attached to the vehicle. Over time, corrosion under these reinforcement brackets can spread to the fuel tank which can result in a fuel leak. A fuel leak in the presence of an ignition source may result in a fire. Owners that operate their vehicle in a corrosive environment (e.g., where road salt is used in winter months) or have concerns about their fuel tank are eligible for a repair under this Regional Program.
- 10177863This article supersedes TSB 19-2026 to update the vehicle model years affected. Some 2000 and newer Ford/Lincoln/Mercury vehicles equipped with aluminum body panels may exhibit corrosion concerns appearing as bubbled and/or peeling paint with or without accompanying white dust. Panel replacement is recommended.
- 10164508Some 2010-2020 vehicles may exhibit distorted glass with a subtle orange peel pattern or streaking etched into the surface. This is caused by hydrofluoric acid which is used in some car wash solutions as a cleaning agent. Hydrofluoric acid can attack the glass and cause visual distortion and/or discoloration on the outer surface which cannot be removed by further cleaning. If this type of distortion is found, inspect the area of the glass that is covered by the cowl and/or molding. The portion of glass that is covered by the cowl or molding will not be affected by the acid. Hydrofluoric acid damage is not a defect in material or workmanship and is not a warrantable condition.
- 10160931On vehicles equipped with an automatic transmission it is imperative that the converter pilot hub be greased with Motorcraft Multi-Purpose Grease Spray XL-5-A even if grease was not applied from the factory. Also verify that the engine/transmission alignment dowel pins are present as well as the engine crankshaft dowel pin, if equipped, when installing the transmission. Failure to adequately lubricate the converter hub greatly increases the likelihood of the flexplate cracking in the future. Missing dowels may cause a misalignment issue also resulting in a premature failure. Refer to Workshop Manual (WSM), Section 307-01.
- 10156863Some 2000 and newer Ford, Lincoln and Mercury vehicles equipped with aluminum body panels may exhibit corrosion concerns appearing as bubbled and/or peeling paint with or without accompanying white dust. Panel replacement is recommended. Follow the Service Procedure steps to correct the condition
- 10155551Some 2000 and newer Ford, Lincoln and Mercury vehicles equipped with aluminum body panels may exhibit corrosion concerns appearing as bubbled and/or peeling paint with or without accompanying white dust. Panel replacement is recommended. Follow the Service Procedure steps to correct the condition
- 10140323The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.
- 10138524The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.
- 10137131Some 2007-2016 Edge/MKX/Flex/MKT/MKZ/MKS/Taurus/Police Interceptor Sedan/Explorer/Police Interceptor Utility vehicles equipped with AWD and built on or before 30-Jun-2016 may exhibit a propane or natural gas odor during idle or low speed driving. This may be due to break down of the power transfer unit (PTU) fluid caused by excessive heat. If the source of the odor is identified as originating from the PTU, an idler bearing repair kit is available to repair the PTU. Refer to the Workshop Manual (WSM), Section 308-07. If the PTU is determined to be repairable, utilize kit GB5Z-7P258-A and the included instruction sheet. For claiming use causal part 7P258 and applicable labor operations in section 07 of the Service Labor Time Standards (SLTS) Manual.
- 10137113Replacing the original equipment SYNC/Navigation system with either an aftermarket SYNC/Navigation kit or modifying original SYNC/Navigation parts to provide additional features is not recommended nor supported on any Ford, Mercury or Lincoln vehicle. Only approved Genuine Ford accessories or originally installed systems are supported and certified to function correctly with other vehicle systems. If you suspect a system has been modified, the following resources can be used to verify original equipment: Monroney Label (Window Sticker), Professional Technician Society (PTS) OASIS tab select SYNC or HVBOM. For Genuine Ford accessories use: PTS Workshop Tab select Dealer Installed Accessory or Accessory Installation.
- 101365972010-2018 various vehicles equipped with SYNC or SYNC 3 may not function when attempting to find or use the Spotify app via AppLink. As of an update released on 1/15/2018 Spotify will no longer be supporting their AppLink integration. No repair attempts should be attempted to correct this concern.
- 10109070The Powertrain Control/Emissions Diagnosis (PC/ED) manual has been revised for diagnosing electronic throttle bodies (ETBs). The ETC_ACT and ETC_DSD PIDs should not used to diagnose possible ETB concerns. The IDS has a limited refresh rate when reading these PIDs and cannot display quickly enough to validate a concern. The PCM automatically monitors these inputs more accurately and will set diagnostic trouble codes (DTCs) when appropriate. Using these PIDs for diagnostics will lead to inaccurate results and improper ETB replacements. If a concern is intermittent and no DTCs are present, refer to historical DTCs and the PC/ED, Section 3 No DTCs Present Index chart for further information.
- 10095858Some 2007-2016 edge/mkx/flex/mkt/mkz/mks/taurus/taurus police/explorer/explorer police equipped with all wheel drive (AWD) and built on or before 30-jun-2016 may exhibit a ticking and/or knocking noise coming from the driveline area. To identify this noise, refer to workshop manual (wsm), section 100-04, and follow the symptom chart. If the source of the noise IS identified as the ptu and/or internal to the ptu, disassemble ptu assembly. Refer to updated wsm, section 308-07. If the ptu IS determined to be repairable, utilize kit gb5z-7p258-a and the included instruction sheet. For claiming, use causal part 7p258 and applicable labor operations in section 07 of the service labor time standards (slts) manual.
- 10091151Some 2008-2017 ford/mercury/lincoln vehicles equipped with sync may generate a vhr that identifies a concern with the brakes and suspension category indicating service IS required due to a brake system warning lamp being illuminated. If the park brake was applied when the vhr was gathering data from the major vehicle systems, the brakes and suspension message will be reported as the vhr looks for any warning lamps illuminated in the instrument cluster. Rerun the vhr with the engine on and vehicle in park, and ensure the park brake IS disengaged. If the sync vhr IS still reporting a concern to the customers sync owners account, refer to the appropriate workshop manual section for diagnosis by dtc or symptom. Starting in 2015 not all sync equipped vehicles support vhr, refer to the owners manual for vhr operation.
- 10090681Some 2008-2017 ford/mercury/lincoln vehicles equipped with sync may generate a vhr that identifies a concern with the brakes and suspension category indicating service IS required due to a brake system warning lamp being illuminated. If the park brake was applied when the vhr was gathering data from the major vehicle systems, the brakes and suspension message will be reported as the vhr looks for any warning lamps illuminated in the instrument cluster. Rerun the vhr with the engine on and vehicle in park, and ensure the park brake IS disengaged. If the sync vhr IS still reporting a concern to the customers sync owners account, refer to the appropriate workshop manual section for diagnosis by dtc or symptom. Starting in 2015 not all sync equipped vehicles support vhr, refer to the owners manual for vhr operation.
- 10076519Fuel Tank Corrosion Inspection and Repair REASON FOR THIS PROGRAM In some of the affected vehicles which are operated in high-corrosion environments associated with road salt use, moisture and salt may become trapped under the fuel tank mounting reinforcement brackets at the four corners where the fuel tank is attached to the vehicle. Over time, corrosion under these reinforcement brackets can spread to the fuel tank which can result in a fuel leak. A fuel leak in the presence of an ignition source may result in a fire. Owners that operate their vehicle in a corrosive environment (e.g., where road salt is used in winter months) or have concerns about their fuel tank are eligible for a repair under this Regional Program.
- 10076298Recall 15S31 Fuel Tank Corrosion Inspection and Repair In some of the affected vehicles which are operated in high-corrosion environments associated with road salt use, moisture and salt may become trapped under the fuel tank mounting reinforcement brackets at the four corners where the fuel tank is attached to the vehicle. Over time, corrosion under these reinforcement brackets can spread to the fuel tank which can result in a fuel leak. A fuel leak in the presence of an ignition source may result in a fire. Owners that operate their vehicle in a corrosive environment (e.g., where road salt is used in winter months) or have concerns about their fuel tank are eligible for a repair under this Regional Program.
- 10058460Lincoln/ford: an overhaul transmission motorcraft kit, available for some vehicles, contains an incorrect valve bode separator plate and would need to discard 7z490 part and use bt4z-7z490 to prevent harsh downshifts. Model 2010-12 edge, MKX, flex, MKS, MKT, taurus.
- 10057865Ford: after powertrain control module reprogramming, the malfunction indicator lamp (mil) IS on with several diagnostic trouble codes (dtc) p06b8, p068a, p2610, if key not left for 30 seconds in off position following programming on some model 2009-15 vehicles.
- 10057834Ford: no service action IS recommended for this condition. Please use at your discretion. Various 2010-2015 vehicles may experience a turbulence noise, similar to an helicopter noise, at highway speeds when the rear door window(s) or sunroof are open.
- 10057723Ford: a job aid was developed and now available for the ptu internal or external fluid leakage for all wheel drive vehicles.
- 10056192Ford/lincoln: the sync badge name plate on front floor center console, on some vehicles, will be loose, or falling off or IS delaminating. Model 2010-2014 edge, MKX.
- 10056003Ford/lincoln: some vehicles are experiencing a type of noise, a howl or growl, emitting from the driver or passenger rear wheel area. Model 2007-2010 edge, MKX.
- 10054925Ford: see document search button for owner letter. Under driving and certain environmental conditions, a small tear can develop in the diaphragm of the brake booster and a hissing noise can be heard when depressing pedal and experience a spongy pedal, without effect braking performance. Model 2010-2013 edge, MKX. Updated 2/6/15.
- 10054565Ford/lincoln: the banjo fitting that IS attaching pressure hose to steering gear IS experiencing a power steering fluid leakage. Model 2008-2013 edge, MKX.
- 10053274Ford/lincoln: on some vehicles, transmission 5TH gear start at stop, speed control drops or inoperative, backup camera on in drive, 5TH gear start from stop and transmission slipping or neutral out, due to digital transmission range (tr) sensor high resistance. Models 2009-11 edge, taurus, flex; 2009-11 MKS, MKX, MKT.
- 10039159Ford: the idle speed drops lower than desired and may fluctuate. There may be two possible trouble codes stored.
- 10039158Ford: the stability control/traction light may intermittently come on with a single trouble code stored. 2010 edge/mkx.
- 10039121Ford: there may be a sluggish acceleration or hesitation feeling when rolling to a stop. This will be followed by a harsh bump.
- 10039119Ford: the tire pressure warning light IS on due to low pressure of one of the tires. There may be corrossion in the tire bead seat area. 2009-2011 edge/mkx.
- 10039072Ford: there may be a loss of power, hesitation, surge, or lack of throttle response while driving. The brake over accelerator feature may be activating.
- 10039053Ford: if there IS an intermittent lack of power, surge, or hesitation while driving the brakes will override acceleration.
- 10038965Comm-trans lund: some 2009-2011 models may have the air bag inicator flashing with a stored trouble code. This IS a software problem.
- 10037089Ford: 2010 all wheel drive vehicles may have a shudder/vibration or a clunk noise while driving in low speeds.
Every Ford Edge model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.