2014 Ford Edge
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2014 Ford Edge. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2014 Ford Edge. Newest first.
Ford Motor Company (Ford) is recalling certain 2014-2016 Explorer, 2014-2015 Taurus and 2014 Edge vehicles equipped with 2.0L or 2.3L engines and front wheel drive. The support bracket for the front drive axle halfshaft may fail.
Risk and remedy
Risk
The failed bracket could result in a loss of park function which can cause unintended vehicle movement, and loss of motive power while driving which increases the risk of a crash.
Remedy
Ford will notify owners, and dealers will replace the link shaft bracket, free of charge. Parts are not currently available. Owners received an interim notification detailing safety risk December 8, 2020. A second letter will be mailed when parts become available in January 2021. The recall began February 2, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 20S63.
Ford Motor Company (Ford) notified the agency on January 8, 2015, that they are recalling certain model year 2014 Ford Escape vehicles manufactured April 15, 2014, to May 8, 2014, and 2015 Lincoln MKC vehicles manufactured April 21, 2014, to May 15, 2014. On April 30, 2015, Ford expanded the recall to cover an additional 45,505 vehicles, including certain…
Risk and remedy
Risk
If the fuel pump fails, the vehicle may stall without warning, increasing the risk of a crash.
Remedy
Ford will notify owners, and dealers will replace the fuel pump, free of charge. The recall began on February 27, 2015. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 14S30.
Ford Motor Company (Ford) is recalling certain model year 2012-2014 Ford Edge and Lincoln MKX vehicles manufactured September 2, 2010, to November 30, 2013; 2013-2014 Ford Taurus and Lincoln MKS vehicles manufactured August 25, 2011, to November 30, 2013; and 2013-2014 Ford Flex and Lincoln MKT vehicles manufactured September 12, 2011, to November 30, 2013.…
Risk and remedy
Risk
If the halfshaft and linkshaft become disengaged while driving, power will no longer be transmitted to the wheels, increasing the risk of a vehicle crash. Additionally, if the parking brake is not applied before exiting the vehicle, the vehicle may roll away despite the transmission being placed in 'Park', increasing the risk of injury to exiting occupants and bystanders.
Remedy
Ford will notify owners, and dealers will inspect the vehicles to make sure that the halfshaft is properly retained. If it is not, dealers will replace the linkshaft and also replace the halfshaft if it shows evidence of spline damage, free of charge. The recall began on August 4, 2014. Owners may contact Ford customer service at 1-800-392-3673. Ford's number for this recall is 14S10.
Owner complaints
384 complaints14 involved a crash11 injuries
What owners report most
Latest complaints
- Engine · Power train · Unknown or other
horn stopped working for unknown reasons fuses were checked, all good fuses same with relays and clock springs, horn appears too no longer work on my vehicle the vehicle only has 121k miles, check engine light popped on and all it says is spark plugs got the coils and plugs done same issue. got a dignosis done piston rings have failed at 121k miles. cv axle issue has became disconnected from joint. expensive repair.
- Unknown or other
The rear reverse camera is not working. When placed in reverse, it displays a blank screen, upside down image, or on a rare occasion it shows the rear image correctly. This same issue has been recalled by ford for model years 2015 thru current. The issue has been present long before 2015. My…
The rear reverse camera is not working. When placed in reverse, it displays a blank screen, upside down image, or on a rare occasion it shows the rear image correctly. This same issue has been recalled by ford for model years 2015 thru current. The issue has been present long before 2015. My camera stopped working in 2019 - after the warranty had expired. This issue impacts my safety when shifting into reverse. On occasion when the camera displays a correct image, I use it for backing up, but it flips or goes blank while backing up.
- Structure › Body
I took my 2014 Ford Edge in for an annual inspection and discovered severe rust over the entire frame and a large hole rusted through the subframe. The rust had spread to the suspension and exhaust pipe. The car failed inspection and after seeking multiple consultations from auto body repair shops…
I took my 2014 Ford Edge in for an annual inspection and discovered severe rust over the entire frame and a large hole rusted through the subframe. The rust had spread to the suspension and exhaust pipe. The car failed inspection and after seeking multiple consultations from auto body repair shops it was deemed the car needs a whole new frame, subframe, suspention within 1 year and a new exhaust pipe. I researched the issue and learned this is a widespread and reported issue with subframes and suspension mounting points on 2007–2014 Ford Edges that can suffer from severe, premature rust and structural rotting in "salt belt" states where road salt is used. My Edge was purchased from an owner in Massachusetts where they drove it for 10 years and that is a salt belt state. I can no longer drive the car because this heavy corrosion can cause the control arm or toe link bracket to separate from the rusted subframe, leading to a sudden loss of vehicle control. Ford did not to issue a formal recall for the subframe rust and instead created Customer Satisfaction Program 20N06 to explicitly address severe subframe rust. However this program only applies to cars within the 10 year warranty or less than 150K miles. My Edge is outside warranty by 1 year and only has 132K miles. There were no warning signs or communication from Ford regarding this issue and they clearly acknowledge this is manufacturer fault.
- Back over prevention › Rearview system braking · Unknown or other
Rear camera not working, blank screen, upside down picture, distorted picture. Same issue which was recalled by ford on earlier models, ie 2013
- Unknown or other
Rear view camera, image is displayed upside down or will also go blank sometimes.
- Unknown or other
The rear view mirror backup camera continues to stop working and occasionally camera shows everything 280 degrees upside down. this is a MAJOR safety issue !!!!!!
- Back over prevention › Warnings · Unknown or other
The backup camera works periodically. Over a year ago, I went to Fiesta Ford to complain but it would cost me over $1000 to repair the camera. Many rimes it will start to work and during my back up, the screen would go black. There were several times when this occurred where I almost backed into another car backing up at the same time. The message on the screen says camera currently not available.
- Service brakes
On three separate occasions, the brake pedal has gone all the way to the floor, with braking power reduced to a scary, dangerous level. An independent mechanic ran a diagnostic scan on one of those occasions and received an ABS Module fault. They bled the system, and the brakes worked well (fault…
On three separate occasions, the brake pedal has gone all the way to the floor, with braking power reduced to a scary, dangerous level. An independent mechanic ran a diagnostic scan on one of those occasions and received an ABS Module fault. They bled the system, and the brakes worked well (fault went away) -- until the next incident, in which the car decided to randomly 'fix' itself about 20 minutes later. Independent shop and the dealership performed in-depth inspections of the entire braking system and could not find the issue. This hydraulic failure is a documented safety problem on other Edge models and should be the subject of a recall for the 2014 Ford Edge.
- Service brakes
Brake pedal felt mushy, took vehicle to repair shop and had master cylinder replaced. Problem persisted so took vehicle to a different repair shop and had brake booster replaced. Pedal felt firmer but then a hissing sound could be heard while driving without using brakes. Had brake booster replaced…
Brake pedal felt mushy, took vehicle to repair shop and had master cylinder replaced. Problem persisted so took vehicle to a different repair shop and had brake booster replaced. Pedal felt firmer but then a hissing sound could be heard while driving without using brakes. Had brake booster replaced again as well as the vacuum hose connected to booster. Now Pedal goes all the way the floor requiring excessive pressure to stop vehicle and a high pitched hissing sound is heard when applying pressure to brake pedal. Hissing sound still present while car in motion without touching brakes. Vehicle had to be put into neutral to stop. Backing out of driveway, vehicle continues to roll slightly even when Pedal pushed to floor. Mo warning lights have ever come on and brake fluid reservoir needs frequent additions of fluid.
- Visibility/wiper
The backup camera malfunctions, and has been doing so for about a year. When the vehicle is put into REVERSE sometimes the camera screen will be black for a few moments, followed by a message that the camera isn't available, and that I should contact my dealer. Sometimes it will come on, but show…
The backup camera malfunctions, and has been doing so for about a year. When the vehicle is put into REVERSE sometimes the camera screen will be black for a few moments, followed by a message that the camera isn't available, and that I should contact my dealer. Sometimes it will come on, but show an upside-down image. There are active recalls for this problem, but I can't seem to get my VIN on the recall list so that this safety issue can be fixed.
- Visibility/wiper
Ford has a recall on all back up cameras on Ford Edges due to the camera malfunctioning but they only have the recall back to year 2015. My camera has been malfunctioning forever but I did and do not want to pay to get it corrected. The camera shows everything upside down. I feel Ford should fix every camera that has issues, not just from 2015 and beyond.
- Unknown or other
My backup camera has had problems for a least a year and a half with my backup camera being inverted or black at times, more often than functioning correctly. In addition over the last 6 months my entire infotainment center goes black at which time I have no access to climate controls, navigation…
My backup camera has had problems for a least a year and a half with my backup camera being inverted or black at times, more often than functioning correctly. In addition over the last 6 months my entire infotainment center goes black at which time I have no access to climate controls, navigation, radio or Bluetooth connections for cell phone. Consider the recent recall for vehicles one year newer then mine I’m sure there are others within my year and older experiencing this problem
- Unknown or other
I’ve had some serious problems with my back up camera sometimes it blacks out and turns completely black in the middle of me backing up a few times I almost ran into a car and a person backing up and then when it goes blank all of a sudden I couldn’t see. Also sometimes the picture will turn upside…
I’ve had some serious problems with my back up camera sometimes it blacks out and turns completely black in the middle of me backing up a few times I almost ran into a car and a person backing up and then when it goes blank all of a sudden I couldn’t see. Also sometimes the picture will turn upside down and get distorted. I was going to get it looked at and I spoke with a friend that has a 2013 Ford edge and said they were having the same problems with their back up camera. So I looked it up online and noticed there’s a recall on all backup cameras on Ford vehicles, it said it started 2015 and up, and it stated that the problems that they were having were the exact same problems that I’m having but when I put my information in, it says there’s no recall on my car so if it’s the specific year, I don’t know, but I’m obviously having the exact same problems with my backup camera and I feel like it’s dangerous and I’m sure I’m not the only vehicle that that’s happened to, especially with them having a recall on their backup cameras. I feel that ford should recall on the backup cameras for more than just the 2015 and up, my model is a 2014 Ford edge sport and definitely is having the exact same problems as the other recalls on their back up cameras
- Service brakes
Ford has the abs valve on back order for over 700 vehicles with no delivery date in sight. The vehicles are worthless at this point because they can’t be fixed or driven safely.
- Service brakes
In busy traffic brake pedal went all the way to floor almost causing me to hit vehicle in front of me. Vehicle was towed to my mechanic at which time he informed me this is an ongoing issue with Ford and is recall issue. I have contacted my local Ford dealer as well as Ford Motor company and filed…
In busy traffic brake pedal went all the way to floor almost causing me to hit vehicle in front of me. Vehicle was towed to my mechanic at which time he informed me this is an ongoing issue with Ford and is recall issue. I have contacted my local Ford dealer as well as Ford Motor company and filed a claim.Vehicle has not been repaired. I hope sooner than later Ford will acknowledge this ongoing issue as this is a very catastrophic loss!!
- Service brakes
My ABS module/ hydraulic control unit isn’t working . My ford dealership, Autonation Lincoln Clearwater, could not find a replacement and were told that they weren’t making them anymore . I found that there were recalls on years 2015 and 2016
- Back over prevention › Warnings · Electrical system
The backup camera on my 2014 Ford Edge is upside down. At night, the picture is completely unrecognizable. This year should have been included in the recent recall.
- Service brakes
I am an automotive service technology teacher, retired. The ABS system on this vehicle failed without warning and without any trouble codes. No lights, no codes. The pedal sinks nearly to the floor, but does engage the brakes once the ABS chambers fill with fluid. But, by the time brakes begin to…
I am an automotive service technology teacher, retired. The ABS system on this vehicle failed without warning and without any trouble codes. No lights, no codes. The pedal sinks nearly to the floor, but does engage the brakes once the ABS chambers fill with fluid. But, by the time brakes begin to engage, one's heart skips a beat and it actually takes 1/2 second longer for the brakes to actually work. If not for my tall stature, I might not be able to reach the distance it takes to get hydraulic pressure. Brakes work, but marginally due to interference with floor. My research indicates this is a relatively common problem with these vehicles. Folks need to be warned! A recall is in order; at the very least a service bulletin and a customer notification. I'll fix it, but I shouldn't need to. I'll save the old unit and ship it if anybody wants to inspect it.
- Unknown or other
The rear view camera displays a distorted image on the center of the display screen when the vehicle IS in reverse.
- Back over prevention
The contact owns a 2014 Ford Edge. The contact stated that while reversing, the rear-view camera displayed a distorted image. The vehicle was taken to an independent mechanic, where it was diagnosed with a rear-view camera system failure. The contact was informed that the rear-view camera system…
The contact owns a 2014 Ford Edge. The contact stated that while reversing, the rear-view camera displayed a distorted image. The vehicle was taken to an independent mechanic, where it was diagnosed with a rear-view camera system failure. The contact was informed that the rear-view camera system needed to be replaced. The vehicle was not repaired. The contact referenced an unknown recall which had a similar failure description; however, the vehicle was not associated. The manufacturer was not made aware of the failure. The failure mileage was unknown.
- Unknown or other
Rear back up camera stopped working after image turned upside down for a few days.
- Visibility/wiper
faulty rear-view camera
- Back over prevention
The contact owns a 2014 Ford Edge. The contact stated that on several occasions for over a year, when the vehicle was shifted into reverse(R), the back over prevention image was turned upside down. The vehicle was taken to a dealer, but was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was unknown.
- Electrical system · Seat belts
1) my rear view camera is disoriented when car is in reverse. Sometimes the picture on the screen is upside down or doesnt show anything at all. 2) drivers seat belt does not clip in correctly. I have to push the red button in for the seat belt to clip into place.
- Unknown or other
My backup camera is failing periodically
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Wheel Separation
On November 29, 2014, ODI received a complaint reporting the complete separation of an original equipment 22-inch alloy wheel rim mounted on the right front position of a model year 2014 Ford Edge vehicle (VOQ 10661278).The driver indicated that the right-front corner of the vehicle suddenly dropped while driving…
On November 29, 2014, ODI received a complaint reporting the complete separation of an original equipment 22-inch alloy wheel rim mounted on the right front position of a model year 2014 Ford Edge vehicle (VOQ 10661278).The driver indicated that the right-front corner of the vehicle suddenly dropped while driving, causing the vehicle to go off the road to the right and into a field.The right-front wheel rim was found to have broken into two pieces. The owner said that there was no prior warning or wheel related problems with the vehicle. The vehicle had been driven approximately 8,500 miles at the time of the incident.On May 29, 2015 ODI sent an information request to Ford asking for detailed information related to the specific 22 inch alloy wheel used on the Edge as well as any peer vehicles which used the same type of wheel.On July 17, 2015 Ford provided ODI with the requested information. Ford's search showed that the single incident reported to ODI is the only instance of a wheel failure on the subject or peer vehicles.The failed wheel was sent to the National Transportation Service Board (NTSB) materials analysis laboratory for examination. The NTSB determined that the wheel failed because of a severe impact that caused a crack that rapidly propagated around the circumference of the wheel, The rim fracture surface had a predominantly rough appearance consistent with an overstress fracture (rapid fracture)There were no abnormalities or unique features associated with the fracture initiation site.Metallurgical analysis of the rim found that the material was within specification and no anomalies were identified that could have contributed to the failure.See the full NTSB report for more details.Based on the absence of additional failures and the results of the wheel material testing and failure analysis, this investigation is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency will continue to monitor complaints and other information relating to the alleged defect in the subject vehicles and take further action in the future if warranted.The following VOQ is associated with this investigation: 10661278
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11008948While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions. While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions.
- 10254138All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
- 10251228Certain 2010-2014 Model Year Edge and MKX Vehicles - Extended Warranty Coverage on Brake Booster
- 10246076Certain 2010-2014 Model Year Edge and MKX Vehicles - Extended Warranty Coverage on Brake Booster
- 10235153For 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identification number (VIN) from a different vehicle. Most modules on these affected vehicles are VIN/vehicle specific and hardware variations between modules do exist. Swapping a module from a vehicle or ordering a module using a different vehicle/VIN can cause ineffective repairs and additional vehicle down time. Make sure all appropriate Workshop Manual (WSM) procedures are followed when diagnosing the condition prior to all module replacements and only order modules using the correct VIN.
- 10228876Some Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
- 10212957Some 2013-2023 Ford or Lincoln vehicles with modems activated through FordPass or LincolnWay may experience 12 volt battery drain symptoms when the customer uses non-Ford/Lincoln phone applications as an alternate channel to access vehicle commands such as door lock/unlock, remote start, vehicle location, etc. The battery drain may be caused by excessive calls for data through the vehicle network keeping it in an activated state. Recommend that the customer uninstall the app to ensure this is not contributing to battery symptoms experienced. Advise the customer that unaffiliated third-party app developers do not work directly with Ford to adhere to security, vehicle communication, and privacy requirements.
- 10205031Touchscreen navigation system - arabic language - blank screen
- 102050102.0L Ecoboost - Fuel odor
- 102050086F35 Transmission - Fluid leak at left side halfshaft seal - built on or before 10/14/2013
- 10204994Online automotive service information system for March 2016
- 1020498749 CFR Part 579.5 Monthly Communications - March 2016 Air bag warning light illuminated with diagnostic trouble code (DTC) B141B and/or B141C
- 1020498649 CFR Part 579.5 Monthly Communications - January 2016
- 102049792.0 GTDI/2.3L - Front wheel drive - Bibration and/or grinding/banging/clicking noise
- 10183767Some 2012-2016 vehicles equipped with a touchscreen navigation system and the language set to Arabic may exhibit a blank screen. This may be the result of the ribbon cables not being fully seated inside the front display interface module (FDIM) or an improper software configuration of the FDIM.
- 10177863This article supersedes TSB 19-2026 to update the vehicle model years affected. Some 2000 and newer Ford/Lincoln/Mercury vehicles equipped with aluminum body panels may exhibit corrosion concerns appearing as bubbled and/or peeling paint with or without accompanying white dust. Panel replacement is recommended.
- 10176123Some 2012-2020 Ford and Lincoln vehicles equipped with a TCU may exhibit an inoperative remote start with a 'Vehicle Failed To Start' message when using MyFord Mobile/Ford Pass/Lincoln Way mobile applications. The cellular cloud systems will only allow two remote start requests from the MyFord Mobile/Ford Pass/Lincoln Way apps without a vehicle drive event occurring. If a third remote start request is received, a Vehicle Failed To Start message will be displayed quickly in the mobile app. Once the vehicle is driven, the remote start counter is reset and will allow remote start commands to be sent from the mobile app. If the remote start system is not functioning using the key fob, refer to Workshop Manual (WSM) Section 303-06 for further diagnosis.
- 10172972SSM 48619 - Various Vehicles - Perimeter Alarm Armed And Original Vehicle Keys Cannot Be Accessed to Enter Vehicle - CAN Protection Strategy Some 2013-2016 Model Year Vehicles may exhibit a concern in which the Perimeter Alarm is active and the original keys cannot be accessed to disable the perimeter alarm. This concern would most often occur when a customer loses keys and the dealership is attempting to program new keys to the vehicle. The Workshop Manual (WSM), Section 419-01A Perimeter Anti-Theft Alarm - System Operation and Component Description has been updated to inform of the Controller Area Network (CAN) Protection Strategy. Follow the procedure outlined to prevent replacement of the Body Control Module (BCM) on CAN Protection Strategy equipped vehicles when original keys are lost and perimeter alarm is active. Refer to the WSM for further detail on the CAN Protection Strategy. Lost keys and replacement of BCM for lost keys is non-warrantable.
- 10169994Customer Satisfaction Program 19N09 Certain 2011-2014 Model Year Edge and MKX and 2013-2014 Model Year Explorer, Flex, and MKT Vehicles Left Front Door Latch Extended Coverage
- 10164508Some 2010-2020 vehicles may exhibit distorted glass with a subtle orange peel pattern or streaking etched into the surface. This is caused by hydrofluoric acid which is used in some car wash solutions as a cleaning agent. Hydrofluoric acid can attack the glass and cause visual distortion and/or discoloration on the outer surface which cannot be removed by further cleaning. If this type of distortion is found, inspect the area of the glass that is covered by the cowl and/or molding. The portion of glass that is covered by the cowl or molding will not be affected by the acid. Hydrofluoric acid damage is not a defect in material or workmanship and is not a warrantable condition.
- 10164497For Ford and Lincoln vehicles that require positive or negative battery terminal replacement, it is not necessary to replace the complete battery cable harness (14300 and 14301) for this concern. Positive battery cable clamp BT4Z-14450-AA and negative battery cable clamp BT4Z-14450-BA are available for this type of repair. Do not cut or shorten the battery cable, instead carefully remove the affected battery cable clamp and clean the cable end as necessary to preserve wire length. Some rework may be necessary for some vehicle environments. Bend the new positive battery cable clamp as needed and crimp it to the existing battery cable. Make sure to use heat shrink tubing over the battery cable to battery cable clamp connection. Obtain the heat shrink tube locally.
- 10160931On vehicles equipped with an automatic transmission it is imperative that the converter pilot hub be greased with Motorcraft Multi-Purpose Grease Spray XL-5-A even if grease was not applied from the factory. Also verify that the engine/transmission alignment dowel pins are present as well as the engine crankshaft dowel pin, if equipped, when installing the transmission. Failure to adequately lubricate the converter hub greatly increases the likelihood of the flexplate cracking in the future. Missing dowels may cause a misalignment issue also resulting in a premature failure. Refer to Workshop Manual (WSM), Section 307-01.
- 10159494SSM 47948 - 2010-2019 Various Vehicles - Turbocharged Engines - Oil Supply Filter Replacement When Replacing The Turbocharger Or The Turbocharger Oil Supply Tube For 2010-2019 vehicles equipped with turbocharged engines, when diagnosing and/or replacing turbo related concerns, all steps within the Workshop Manual (WSM) procedure must be followed including replacement of all mandatory discarded parts. When specified in the WSM, the turbocharger oil supply filter must be replaced whenever the turbocharger or the turbocharger oil supply tube are replaced. Turbocharger bearing failure may occur if oil starvation occurs due to a restricted filter.
- 10159489Some 2013-2019 vehicles equipped with a EVDC air conditioning (A/C) compressor may exhibit poor A/C performance/improper climate function and/or a diagnostic trouble code (DTC) P06A0 in the powertrain control module (PCM). To support the proper diagnosis of this compressor, the EVDC control valve tester has been developed and is available from Rotunda (339-EVDC100). A tester has been provided to each U.S. dealership free of charge with shipments completed 19-Apr-2019 (reference EFC07013 on FMCDealer.com). This tester will help reduce the potential for misdiagnosis and unnecessary compressor replacement. Make sure that this tester is used for warranty repairs and document the test results in the Technician Comments field. Refer to the Rotunda catalog for a video and user manual which provide detailed operating instructions.
- 10156863Some 2000 and newer Ford, Lincoln and Mercury vehicles equipped with aluminum body panels may exhibit corrosion concerns appearing as bubbled and/or peeling paint with or without accompanying white dust. Panel replacement is recommended. Follow the Service Procedure steps to correct the condition
- 10155551Some 2000 and newer Ford, Lincoln and Mercury vehicles equipped with aluminum body panels may exhibit corrosion concerns appearing as bubbled and/or peeling paint with or without accompanying white dust. Panel replacement is recommended. Follow the Service Procedure steps to correct the condition
- 10152473For 2010-2019 vehicles equipped with turbocharged engines, when diagnosing and/or replacing turbo related concerns, all steps within the Workshop Manual (WSM) procedure must be followed including replacement of all mandatory discarded parts. For all turbocharged engine applications, the turbocharger oil supply filter (6C683 gas engine/6L625 connector style or 6A968 diesel engine) must be replaced whenever the turbocharger or the turbocharger oil supply tube are replaced. Turbocharger bearing failure may occur if oil starvation occurs due to a restricted filter.
- 10140323The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.
- 10138524The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.
- 10137145Some Ford and Lincoln vehicles equipped with a 2.7L or 3.0L EcoBoost engines may exhibit an oil leak from the engine oil pan RTV seal. Replace the oil pan by performing the published Workshop Manual (WSM) service procedures. After removing the oil pan, it is suggested to allow the crankcase to drain overnight to minimize the chance of residual oil contaminating the crankcase sealing rail. Remove all traces of old RTV, clean the engine sealing surface with only Motorcraft Metal Brake Parts Cleaner then wipe with Motorcraft Metal Surface Prep Wipes, and allow to air dry as directed in WSM, Section 303-00, RTV Sealing Surface Cleaning and Preparation. If possible, after the new oil pan is installed, allow the new RTV sealant to cure for 4 hours before refilling the engine with oil. Ford is investigating this concern. Monitor OASIS for future updates.
- 10137131Some 2007-2016 Edge/MKX/Flex/MKT/MKZ/MKS/Taurus/Police Interceptor Sedan/Explorer/Police Interceptor Utility vehicles equipped with AWD and built on or before 30-Jun-2016 may exhibit a propane or natural gas odor during idle or low speed driving. This may be due to break down of the power transfer unit (PTU) fluid caused by excessive heat. If the source of the odor is identified as originating from the PTU, an idler bearing repair kit is available to repair the PTU. Refer to the Workshop Manual (WSM), Section 308-07. If the PTU is determined to be repairable, utilize kit GB5Z-7P258-A and the included instruction sheet. For claiming use causal part 7P258 and applicable labor operations in section 07 of the Service Labor Time Standards (SLTS) Manual.
- 10137113Replacing the original equipment SYNC/Navigation system with either an aftermarket SYNC/Navigation kit or modifying original SYNC/Navigation parts to provide additional features is not recommended nor supported on any Ford, Mercury or Lincoln vehicle. Only approved Genuine Ford accessories or originally installed systems are supported and certified to function correctly with other vehicle systems. If you suspect a system has been modified, the following resources can be used to verify original equipment: Monroney Label (Window Sticker), Professional Technician Society (PTS) OASIS tab select SYNC or HVBOM. For Genuine Ford accessories use: PTS Workshop Tab select Dealer Installed Accessory or Accessory Installation.
- 101365972010-2018 various vehicles equipped with SYNC or SYNC 3 may not function when attempting to find or use the Spotify app via AppLink. As of an update released on 1/15/2018 Spotify will no longer be supporting their AppLink integration. No repair attempts should be attempted to correct this concern.
- 10127405Some vehicles may exhibit a no start condition with an illuminated malfunction indicator lamp (MIL) and a DTC P161A after PCM replacement. This may be due to the parameter reset procedure not being properly completed. To clear this DTC, use the Ford Integrated Diagnostic System (IDS) service tool or Ford J2534 Diagnostic Software, select - Toolbox - Body - Security - PATS Functions - Parameter Reset. Follow the on-screen instructions to complete the procedure. This procedure will transfer the existing Key ID information between the modules without the need of having 2 programmed PATS keys present. There is no need to program keys when the PCM is going to be replaced. Additional information can be found in the Workshop Manual (WSM), Section 419-01. Missing or lost keys are not warrantable.
- 10115953Some 2013-2017 Edge/MKX/Escape/MKC/Fusion/MKZ/Flex/MKT/Mondeo/Kuga/EcoSport AWD vehicles where diagnosis leads to a RDU clutch issue, a rear drive unit (RDU) service kit is available. Use the vehicle identification number (VIN) in the parts catalog to look for base part 4A232. If clutch assembly (base 4A232) is not listed in the catalog, this message does not apply. For vehicle repairs refer to updated Workshop Manual (WSM), Section 205-02 on ATC clutch repairs. Use causal part 4A232 or equivalent and applicable labor operations.
- 10109079Some vehicles may have a concern where the safety belt retractor webbing does not extract from the stowed position or exhibits excessive pressure on the occupant during use. This may be due to a normal condition which happens when the seatbelt retracts at a high rate of speed. The Workshop Manual, Section 501-20A General Procedures has been updated with a locked seatbelt retractor releasing procedure.
- 10109070The Powertrain Control/Emissions Diagnosis (PC/ED) manual has been revised for diagnosing electronic throttle bodies (ETBs). The ETC_ACT and ETC_DSD PIDs should not used to diagnose possible ETB concerns. The IDS has a limited refresh rate when reading these PIDs and cannot display quickly enough to validate a concern. The PCM automatically monitors these inputs more accurately and will set diagnostic trouble codes (DTCs) when appropriate. Using these PIDs for diagnostics will lead to inaccurate results and improper ETB replacements. If a concern is intermittent and no DTCs are present, refer to historical DTCs and the PC/ED, Section 3 No DTCs Present Index chart for further information.
- 101090122013-2017 Edge/MKX/Flex/MKT/MKZ/MKS/Taurus/Taurus Police/Explorer/Explorer Police/Continental vehicles equipped with a 3.5L or 3.7L engine, all wheel drive (AWD) and a power transfer unit (PTU) that is being repaired or replaced for an internal failure must also have the vent hose replaced due to contamination in the hose.
- 10095858Some 2007-2016 edge/mkx/flex/mkt/mkz/mks/taurus/taurus police/explorer/explorer police equipped with all wheel drive (AWD) and built on or before 30-jun-2016 may exhibit a ticking and/or knocking noise coming from the driveline area. To identify this noise, refer to workshop manual (wsm), section 100-04, and follow the symptom chart. If the source of the noise IS identified as the ptu and/or internal to the ptu, disassemble ptu assembly. Refer to updated wsm, section 308-07. If the ptu IS determined to be repairable, utilize kit gb5z-7p258-a and the included instruction sheet. For claiming, use causal part 7p258 and applicable labor operations in section 07 of the service labor time standards (slts) manual.
- 10095624Multiple 2014-2016 vehicles equipped with 6F35 transmission and built on 1-jan-2014 and through 31-dec-2015 may exhibit harsh reverse engagement and harsh/delayed 3RD and 5TH gear up/down shifts with no dtcs present. This may be due to a mechanically binding shift solenoid b (ssb). Verify harsh reverse and 3RD and 5TH gear shift events are present. Using ids, identify the band number of ssb for use when ordering parts. Remove the main control. Disassemble and thoroughly clean the valve body and solenoid body to remove any contaminants. Replace ssb, refer to workshop manual (wsm) section 307-01. Using ids, clear transmission adaptive tables. For claiming, use causal part 7g383 and applicable labor operations in section 7 of the service labor time standards (slts) manual.
Every Ford Edge model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.