2007 Ford Escape
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Ford › Escape › 2007
These records cover every 2007 Ford Escape. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
4 recalls name the 2007 Ford Escape. Newest first.
Ford Motor Company (Ford) is recalling certain model year 2001-2008 Ford Escape and Mercury Mariner vehicles manufactured March 31, 2001, to September 1, 2009. The affected vehicles are equipped with either a 2.3L or 3.0L engine and have had their CD4E transmission replaced with remanufactured one that was rebuilt between June 11, 2015 through July 15…
Risk and remedy
Risk
If the shift lever disengages from the transmission, a driver may be unable to shift gear positions and the indicated shift position may not represent the gear position the vehicle is in. Should a disengagement occur while the vehicle is being driven, when the driver goes to stop and park the vehicle, the gear selection indicator may show that the transmission is in the "PARK" position, but the vehicle transmission may not actually be in the "PARK" gear position. If the vehicle is not in the "PARK" position there is a risk the vehicle will roll away as the driver and other occupants exit the vehicle or anytime thereafter. A vehicle rollaway increases the risk of injury to exiting occupants and bystanders.
Remedy
Ford will notify owners, and dealers will inspect the transmissions and either tighten the manual shift lever bolt or replace the manual shift lever assembly. These repairs will be performed free of charge. The recall began on October 23, 2015. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 15S28.
The Timken Company (Timken) is recalling certain aftermarket front wheel bearings, part number 510072, sold from January 22, 2015, to May 21, 2015, to be used as service parts on 2001-2012 Ford Escape, 2001-2011 Mazda Tribute, and 2005-2011 Mercury Mariner vehicles. The affected wheel bearings have incorrect dimensions of a 42mm bore, 76mm outer dimension…
Risk and remedy
Risk
Use of an incorrectly sized wheel bearing can adversely affect the braking and steering of the vehicle, increasing the risk of a crash.
Remedy
Timken has begun notifying distributors who will offer purchasers replacement wheel bearings, free of charge. The recall began on May 21, 2015. Owners may contact Timken customer service at 1-866-984-6536.
Ford Motor Company (Ford) is recalling certain model year 2005-2008 Ford Escape hybrid electric vehicles manufactured October 13, 2003, to June 20, 2008, and 2006-2008 Mercury Mariner hybrid electric vehicles manufactured June 10, 2005, to June 20, 2008. The coolant pump for the hybrid system may fail resulting in the hybrid electronics overheating.
Risk and remedy
Risk
If the hybrid electronics system overheats, it may shut down the powertrain, resulting in a stall-like condition, increasing the risk of a crash.
Remedy
Ford will notify owners, and dealers will inspect and replace the original Motor Electronics Coolant (MEC) Pump with an improved brushless pump, free of charge. The recall is expected to begin on October 27, 2014. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 14S19.
Marathon IS recalling certain seat covers, brand superhides with part numbers 593, 594, 578, 960, 228, 228-09, 267-08, 333, 625, and 630, sold for use as aftermarket equipment for various passenger vehicles. these seat covers are made of heavier thread and are not compatible with seats containing side airbags. the heavier seat cover could interfere with…
Risk and remedy
Risk
An improperly deployed airbag could result in serious injury.
Remedy
Marathon will notify owners of record and replace the seat cover free of charge. the safety recall began on september 14, 2010. owners may contact marathon at 1-800-735-2769.
Owner complaints
254 complaints15 involved a crash2 involved a fire9 injuries2 deaths
What owners report most
Latest complaints
- Fuel/propulsion system · Power train · Unknown or other
My 2007 Ford Escape Hybrid (mileage currently 180,000 but the issue started around 150,000 miles) will occasionally (varies from once a week to once every 3 months) not respond properly when I'm accelerating from a stop. When this happens, I can push the accelerator all the way to the floor, but…
My 2007 Ford Escape Hybrid (mileage currently 180,000 but the issue started around 150,000 miles) will occasionally (varies from once a week to once every 3 months) not respond properly when I'm accelerating from a stop. When this happens, I can push the accelerator all the way to the floor, but the car will accelerate very slowly for the first 5 seconds or so, and then start accelerating normally again. When this issue first began, it nearly resulted in multiple crashes when I was pulling out into traffic, but now I leave lots of extra space when pulling into traffic in case this happens. I've taken the car to an independent mechanic to try to diagnose the issue and they were unable to observe it since it doesn't happen frequently or predictably enough. There were not any warning lamps, messages, or other symptoms of the problem prior to the issue starting.
- Fuel/propulsion system · Power train
While driving, a red triangle to safely stop came up and the vehicle engine shut down. I could not accelerate since the engine was shut down, I could only coast and brake. After the vehicle has been cooling down for 20 min, I’m able to restart the vehicle and drive again until the same issue occurs…
While driving, a red triangle to safely stop came up and the vehicle engine shut down. I could not accelerate since the engine was shut down, I could only coast and brake. After the vehicle has been cooling down for 20 min, I’m able to restart the vehicle and drive again until the same issue occurs again. No light on dashboard. Very dangerous issue as it often happens when driving on the freeway for a while. You have no way to accelerate the vehicle and need to slowly pull over on a busy freeway, endangering others and yourself. The issue has not been reproduced by a dealer or independent service center. No, the vehicle has not been inspected by anyone. Please note that this is a known recall for this vehicle but my VIN is NOT included in the recall. Please see the details of the recall below: NHTSA CAMPAIGN ID: 14V526000 Report Date: SEP 03, 2014 Vehicles Affected: 70,209 Consequence: If the hybrid electronics system overheats, it may shut down the powertrain, resulting in a stall-like condition, increasing the risk of a crash. What You Should Do: Ford will notify owners, and dealers will inspect and replace the original Motor Electronics Coolant (MEC) Pump with an improved brushless pump, free of charge. The recall is expected to begin on October 27, 2014. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 14S19.
- Suspension · Unknown or other
Rear frame rails rotting thru from the inside out, causing potential suspension issues
- Structure › Frame and members
The contact owns a 2007 Ford Escape. The contact stated that while the vehicle was at an independent mechanic for an inspection, the contact was informed that the subframe was severely corroded and needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure…
The contact owns a 2007 Ford Escape. The contact stated that while the vehicle was at an independent mechanic for an inspection, the contact was informed that the subframe was severely corroded and needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and advised the contact to file a complaint with the NHTSA Hotline. The contact related the failure to NHTSA Campaign Number: 14V165000 (Structure); however, the VIN was not included in the recall. The failure mileage was approximately 105,000.
- Electrical system · Engine · Power train
When accelerating on the vehicle it would run fine till about a couple minutes driving then it would jerk and the rpm gauge would go to 0 and then back up the the right rpm
- Power train · Steering
The contact owns a 2007 Ford Escape. The contact stated that while driving at an undisclosed speed, the vehicle experienced a loss of power steering assist. The transmission warning light was illuminated. The vehicle was taken to an independent mechanic, who diagnosed that the power steering module…
The contact owns a 2007 Ford Escape. The contact stated that while driving at an undisclosed speed, the vehicle experienced a loss of power steering assist. The transmission warning light was illuminated. The vehicle was taken to an independent mechanic, who diagnosed that the power steering module needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and advised the contact to file a complaint with the NHTSA Hotline. The failure mileage was approximately 152,000.
- Service brakes, air › Supply › Hoses, lines/piping, and fittings
The contact owns a 2007 Ford Escape. The contact stated that while his wife was driving 10 MPH, the brakes failed with the brake pedal depressed to the floorboard. There was no warning light illuminated. The contact stated that his wife was able to coast the vehicle off the roadway. The contact…
The contact owns a 2007 Ford Escape. The contact stated that while his wife was driving 10 MPH, the brakes failed with the brake pedal depressed to the floorboard. There was no warning light illuminated. The contact stated that his wife was able to coast the vehicle off the roadway. The contact arrived at the scene and drove the vehicle to an independent mechanic. The mechanic discovered that both front brake lines were severely corroded and that the front passenger’s side brake line was leaking brake fluid due to the failure. The manufacturer was notified of the failure and informed him that there were no recalls on the vehicle. The vehicle had been repaired. The failure mileage was approximately 170,000.
- Power train
The torque converter was failing in my 07 escape. When I switched gears from park to drive or reverse the car would shake and sometimes stall out. Or if I had to stop at a stop sign or traffic signal while in drive the same issues would happen. The old torque converter is not available for…
The torque converter was failing in my 07 escape. When I switched gears from park to drive or reverse the car would shake and sometimes stall out. Or if I had to stop at a stop sign or traffic signal while in drive the same issues would happen. The old torque converter is not available for inspection unfortunately because I gave it back to autozone to get the core charge money back. But when we installed the new torque converter it completely solved the issues and the transmission is running great again. It put myself and my passengers at risk since my car would completely turn off at traffic lights sometimes. This problem has been reproduced by others and I actually found out the torque converter was the issue by finding a technical service bulletin (TSB 07-5-6) so I know other shops have discovered this issue. There were no warning lights or anything and no parts were inspected by others. I completed the whole replacement.
- Structure
The contact owns a 2007 Ford Escape. The contact stated that while driving at various speeds a clunking noise was present coming from the rear passenger’s side of the vehicle. The vehicle was taken to the local mechanic who discovered that the rear passenger’s side wheel well was severely rusted…
The contact owns a 2007 Ford Escape. The contact stated that while driving at various speeds a clunking noise was present coming from the rear passenger’s side of the vehicle. The vehicle was taken to the local mechanic who discovered that the rear passenger’s side wheel well was severely rusted causing the rear passenger’s side shock absorber to puncture the wheel well of the vehicle. The vehicle was not yet repaired. The manufacturer was notified of the failure but no assistance was offered. The local dealer was not notified. The failure mileage was 109,000.
- Service brakes
ABS service system warning came up on my dash along with the brake light and the abs light, immediately after the lights came on the ability to stop and stay stopped vanished.
- Electrical system · Service brakes
ABS service light comes on intermittently, when light is on a "service brake system" warning comes across the guage cluster. While this service light is on the escape has little to no braking and requires upwards of 300ft to stop when going 45mph. Once the vehicle is brought to a stop you can hear…
ABS service light comes on intermittently, when light is on a "service brake system" warning comes across the guage cluster. While this service light is on the escape has little to no braking and requires upwards of 300ft to stop when going 45mph. Once the vehicle is brought to a stop you can hear the brake system attempting to pressurize but only making a repeated grinding noise directly in front of the driver in the engine bay. Once vehicle is parked and shut off the brakes continue to make the same grinding noise. After allowing the vehicle to sit over night you may get lucky and have fully functioning brakes or you may unlock the door and hear the grinding noise letting you know the abs warning will be illuminated once the car is started. I have currently rear-ended another vehicle while stopped at a red light because no matter how hard I pressed on the brakes my vehicle continued to roll forward into another vehicle. My vehicle passed inspection with zero obdII codes the day I bought the escape Friday, May 27, 2022. Exactly a week later on June 2, 2022 I experienced severe brake failure and rear ended a 2021 Toyota 4runner. No major damage was caused to either vehicle. Two days later on June 4, 2022 the brake system failed once again causing me to drive my vehicle off the road into the median to avoid an impact at 65mph on interstate I-85. I am a father to my 3 year old daughter, but I am unable to transport my daughter in fear of endangering her life because of a faulty brake system Ford refuses to recall.
- Structure › Body
The contact owns a 2007 Ford Escape. The contact stated that while the vehicle was receiving routine maintenance by an independent mechanic, the contact was informed that underneath the rear of the vehicle was rusted. The dealer was not contacted. The vehicle was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 121,000.
- Suspension · Tires
Front tires bald and worn out in a circular pattern in less then about 4000 miles tires were brand new then purchased another set of 2 new front tires and again tires were bald and in some area they had a circular pattern after 2000 miles
- Power train · Vehicle speed control › Accelerator pedal
The contact's mother owns a 2007 Ford Escape. The contact stated that while his brother was driving at 60 MPH, the vehicle inadvertently downshifted and decelerated to 40-45 MPH. The check engine warning light illuminated. The contact's brother depressed the accelerator pedal however, the pedal…
The contact's mother owns a 2007 Ford Escape. The contact stated that while his brother was driving at 60 MPH, the vehicle inadvertently downshifted and decelerated to 40-45 MPH. The check engine warning light illuminated. The contact's brother depressed the accelerator pedal however, the pedal felt soft and remained on the floorboard. The contact's brother veered to the side of the road. The contact stated that upon turning off and restarting the vehicle, he was able to continue to drive; however, the failure reoccurred while exiting the highway. The contact stated that the vehicle would fail to go into gear while attempting to shift into drive and depressing the accelerator pedal. The contact stated that the vehicle would start but would not move. The dealer and the manufacturer were not notified of the failure. The failure mileage was approximately 195,000.
- Power train
This Escape is an AWD Hybrid. When driving in slippery snow, sand, ice, etc., the front wheels spin, but there is no power transmitted to the rear wheels, causing serious control and traction problems. An "all-wheel-drive-locked" signal appears on the info display, followed instantly by "AWD…
This Escape is an AWD Hybrid. When driving in slippery snow, sand, ice, etc., the front wheels spin, but there is no power transmitted to the rear wheels, causing serious control and traction problems. An "all-wheel-drive-locked" signal appears on the info display, followed instantly by "AWD disabled". After a while (a couple minutes), the system then comes back and says "Automatic AWD restored". Which is simply not true—AWD never engages, but a driver going into a snowstorm or other difficult situation has no way of knowing this until it's too late. Problem was diagnosed by a good mechanic as a faulty transfer case—a very common problem in 2002—2011 AWD Ford Escapes. There is a serious design problem—the transfer case is too close to the exhaust, which cooks the internal lubricant, causes it to leak out completely, and kills the bearings inside the case. There are many cases on forums of this problem causing locked wheels at speed, sudden lack of drive on highways, etc. Not to mention the problem (as in my case) of drivers entering dangerous driving situations where they are counting on AWD for safe driving, but having just front wheel drive, with absolutely no warning from the car. I have no idea why this has not resulted in a. recall so far, but it is an serious, obvious (and worsening) safety issue. Parts and labor cost will be over $1000. Dissection of fragged transfer cases destroyed by this problem is easily available online: https://www.youtube.com/watch?v=7yLkr609bfI
- Fuel/propulsion system · Service brakes
On 12/10/21 the accelerator stuck. I had to pull off the road, because I was losing power. But what if it got stuck at a high rate of speed? How would I stop, other than the hand brake and pray that it works. It had happened another time that week, but I thought it was a fluke as the car only has…
On 12/10/21 the accelerator stuck. I had to pull off the road, because I was losing power. But what if it got stuck at a high rate of speed? How would I stop, other than the hand brake and pray that it works. It had happened another time that week, but I thought it was a fluke as the car only has 85000 miles on it. I bought it in Sept 2021. It happened again on the 11th. Had my family member look at it and they lubricated the accelerator and a cable in the engine compartment. It has not done it since. Here is the VIN # [XXX]. 12/18/21 Drove to church. No problem with anything. No lights on.... the dash. Family member left to go home for the afternoon and stated that they almost hit a herd of deer, because the brakes went straight to the floor. They drove back for the evening program, with the same problem. I drove home about 35 miles an hour, and the brake pedal goes straight to the floor. No noise of any kind, no warning, no puddles where the car was parked at church or at home. The brake light is on now. What in the world. This could be fatal... both of these issues. FORD just told me there are no recalls, and then sent me to a survey. They need to look into these issues....Poor customer service in my opinion and could be a fatal situation. Last week was unable to get in for an appointment within a 50 mile radius to get that problem looked at. NOT able to be seen till after the new year.... INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
- Electrical system · Unknown or other · Vehicle speed control
The theft system randomly sounds off for no reason. The theft light keeps blinking as the key is placed in the run position. The vehicle is having issues starting and there's no sound at all when turning the key. When the vehicle does start it stalls, so the gas pedal must be pushed almost to the…
The theft system randomly sounds off for no reason. The theft light keeps blinking as the key is placed in the run position. The vehicle is having issues starting and there's no sound at all when turning the key. When the vehicle does start it stalls, so the gas pedal must be pushed almost to the floor. I must apply strong pressure to the breaks, so that I can stop and not crash. The problem is not changing and other ownsers are having these same issue with this truck. I've already had the battery checked, starter replaced, purchased a new key , and fob.
- Unknown or other
Vehicle lost power unexpectedly in traffic several times. Once stopped it started after a pause and ran fine for a considerable time until if failed again. When researching online noticed that this year and model had a recall but that is not reflected when I ran the VIN of my 2007 Ford Escape…
Vehicle lost power unexpectedly in traffic several times. Once stopped it started after a pause and ran fine for a considerable time until if failed again. When researching online noticed that this year and model had a recall but that is not reflected when I ran the VIN of my 2007 Ford Escape Hybrid. My concern is the diagnosis at the dealer will not detect this and could result in needless expense which I am not prepared for. The NHTSA has this issue documented and I feel should qualify me to have the coolant pump replaced on a recall before a serious accident.
- Service brakes
Purchased this pre-owned with only 40K miles. It's now only at 45K miles and randomly the ABS light and service brakes notification came on the dashboard. Took it to a garage and had them scan and it seems to be ABS related. Still have no repaired but from reading all over forums, reddit, google…
Purchased this pre-owned with only 40K miles. It's now only at 45K miles and randomly the ABS light and service brakes notification came on the dashboard. Took it to a garage and had them scan and it seems to be ABS related. Still have no repaired but from reading all over forums, reddit, google searches, and more this seems to be an extremely common problem that costs a ton to repair. Ford should handle this as a recall if it IS a regular issue with this make and model. how IS there no class action lawsuit yet? It seems countless people are mentioning that the brakes outright failed while driving on the road or even highways. What if someone dies? This IS not acceptable.
- Service brakes
Hello, I have a 2007 ford escape hybrid. The car IS in excellent condition inside and out except for the braking system. The braking system has been systematically hard to press the pedal since I have owned it due to being a hybrid, however, the braking system IS failing as of 2 days ago.…
Hello, I have a 2007 ford escape hybrid. The car IS in excellent condition inside and out except for the braking system. The braking system has been systematically hard to press the pedal since I have owned it due to being a hybrid, however, the braking system IS failing as of 2 days ago. consistent with many, many other ford escape hybrids, the braking system warning lights, ABS warning lights and brake system service warning will sporadically engage on the vehicle. Even without the warning lights, this vehicles brakes will now fail, often dropping completely to the floor of the vehicle without warning. as the brakes are a vital component of the vehicle the failure has come during critical times, via stop signs, stop lights, stopped traffic, nearly causing serious injuries or fatalities. when the warning lights engage, the braking pedal IS hard, but does fail as well. an immediate service performed at the local garage determined the car malfunctioning brake system IS due to the master brake cylinder and hydraulic brake pump, connected to the hybrid system which IS highly consistent with all early model ford escapes. repair estimates exceed $5000-7000 usd. the braking problem with the early generation ford escape problems IS endemic, and deserving of additional scrutiny and attention from the nthsa. these cars are deadly as set, and thankfully my family has not had an accident or death. Please give these vehicles additional scrutiny, as it IS not obscure to see widespread braking malfunctions nationwide. ford will not acknowledge the problem.
- Electrical system · Unknown or other
The alarm goes off at all hours every day for no apparent reason while locked & parked. The dealership had no way to fix it unless the horn was disarmed. I feel that IS unsafe to have no horn.
- Suspension
The right rear upper shock to body area IS 85% rusted out and IS unsafe to drive. Dozens of used car lots have told me this IS a well known & documented issue with this vehicle. I feel ford motor co. IS aware or should be aware of this, and should be responsible for it's repair as well as any…
The right rear upper shock to body area IS 85% rusted out and IS unsafe to drive. Dozens of used car lots have told me this IS a well known & documented issue with this vehicle. I feel ford motor co. IS aware or should be aware of this, and should be responsible for it's repair as well as any damages resulting from the vehicle being driven. I have no of that nature. I checked around as to the cost of repair; and it IS expensive. Approx: $600-1,000) that IS a lot of money which IS close to the vechile's value. I feel this situation IS not fair due to this hard to detect shoddy workmanship during the vehicle's design process. I am surprised it was not listed on the recall lkist. Actually I am stunned. please research this matter, and give me your findings. thank you much. harry j. Carter, lll
- Power train
While driving escape at approx 70mph the overdrive sensor ses light came on and engine was making a whining noise. stopped and borrowed a scan tool from a local garage we know. codes p0741 and p1744 for tcc were found. drove home approx 40 miles. Escape was shifting poorly after exiting…
While driving escape at approx 70mph the overdrive sensor ses light came on and engine was making a whining noise. stopped and borrowed a scan tool from a local garage we know. codes p0741 and p1744 for tcc were found. drove home approx 40 miles. Escape was shifting poorly after exiting expressway. limped vehicle home. next day 11/14/2020 attempted to take escape to mechanic. escape had total transmission failure after about 5 minutes. odometer reads approx 110,500 miles escape was towed to accurate transmission in bellevue, mi for possible repair. diagnosis was that the vehicle needed a total rebuild of the transmission for $2900. heard that some ford escapes were recalled for transmission issues and wondered about 2007 ford escape issues.
- Structure › Body
At 75,000 miles this vehicle recently failed nh state safety inspection due to excessive rust on the unibody and subframe/ control arm passenger side. the inspection was performed at our local ford dealership. otherwise vehicle looks dated but new, taken care of well. even the original step bars…
At 75,000 miles this vehicle recently failed nh state safety inspection due to excessive rust on the unibody and subframe/ control arm passenger side. the inspection was performed at our local ford dealership. otherwise vehicle looks dated but new, taken care of well. even the original step bars are in good shape with little to no rust.ford has a recall on the 2001-2004 model years for what appear to be the same issue and will remedy by installing an additional brace. this does not sound like a good/ safe idea to me
- Structure › Body
Passenger rear frame rusted through and the shock came right through the trunk.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Electronic Throttle Body Malfunction
In a letter dated August 30, 2012, The North Carolina Consumers Council (NCCC) petitioned the National Highway Traffic Safety Administration (NHTSA) to initiate a defect investigation of alleged electronic throttle body failures resulting in engine stall or surge while driving in model year (MY) 2005 through 2012 Ford…
In a letter dated August 30, 2012, The North Carolina Consumers Council (NCCC) petitioned the National Highway Traffic Safety Administration (NHTSA) to initiate a defect investigation of alleged electronic throttle body failures resulting in engine stall or surge while driving in model year (MY) 2005 through 2012 Ford Escape vehicles. On October 2, 2012 the Office of Defects Investigation (ODI) opened a Defect Petition DP12-006 to evaluate whether to grant or deny the petition. The petition is hereby granted on certain model years. The NCCC letter cites two complaints of stall while driving in MY 2009 Ford Escape vehicles that were diagnosed as failed throttle bodies with diagnostic trouble codes (DTC) P2111, Throttle Body Stuck Open, and P2112, Throttle Body Stuck Closed. The petitioner indicates that the owners of both vehicles reported experiencing repeated incidents of stalling and engine surging. According to Ford, Escape non-hybrid vehicles are equipped with Electronic Throttle Body (ETB) assemblies beginning with MY 2009. Vehicles manufactured between June 22, 2009 and October 15, 2009 may contain contaminated printed circuit boards (PCB) with plating variations. Plating variations could lead to a lack of continuity in the throttle position sensor circuit where P2111 and/or other DTCs would be generated and stored. Ford and its electronic throttle body supplier, Delphi, modified the PCB manufacturing process and issued a technical service bulletin (TSB) 09-23-5. Vehicles produced after October 15, 2009 incorporated ETBs manufactured with a PCB process that resolved this condition. ODI's analysis identified a total of 123 unique reports indicating allegations of reduced motive power or vehicle stall. Depending on the condition of throttle control system malfunction, a driver may experience varying levels of reduced engine performance associated with three limp home modes. In two limp modes, reduced engine performance may maintain vehicle speeds above 20mph while the third is a limited limp home mode with engine speeds limited to approximately 900 RPM. Allegations of stall appear to be related to the limited limp home mode. Vehicles are not likely to unexpectedly stall as a result of this condition, but drivers may characterize the reduced functionality as a stall, even though their vehicle may still has motive capability. Allegations of vehicle surge appear to be related to limp home mode operation. Complaints alleging surge are most likely related to engine RPM fluctuations at low vehicle speeds or idle as the control system engages to prevent engine stall. In limited limp mode, rough-idle conditions may exist while the control system attempts to modulate engine RPMs once the vehicle reaches a reduced speed to maintain approximately 900 RPM. Separately, ODI received 59 complaints alleging incidents of engine stall while driving in model year (MY) 2010-2011 Ford Fusion vehicles. Approximately 60 percent (36) of the incidents occurred at speeds of 40 miles per hour or more. Eighty percent of complaints (47) were received beginning March 2012 and 14 complaints reported that the throttle body was replaced or DTCs associated with limp home modes. Additionally, Ford issued TSB 10-21-6 addressing DTCs associated with idle speed drops and limited limp home mode. The petition is granted on certain model years.Preliminary Evaluation PE13-003 has been opened to assess the scope, frequency and potential safety consequences associated with the alleged defect.See full copy of the closing resume for this defect petition for list of the VOQs associated with the defect petition analysis.
- Tire valve cracking
On october 14, 2008, odi opened pe08-060 to investigate allegations of cracked and leaking snap-in tire valves in model year (my) 2007 vehicles manufactured by ford motor company.the valves were supplied to ford by topseal auto-parts, a subsidiary of the shanghai baolong automotive corporation in china.valves made by…
On october 14, 2008, odi opened pe08-060 to investigate allegations of cracked and leaking snap-in tire valves in model year (my) 2007 vehicles manufactured by ford motor company.the valves were supplied to ford by topseal auto-parts, a subsidiary of the shanghai baolong automotive corporation in china.valves made by topseal for aftermarket sale were the subject of two recent safety recalls by tech international (08t-018) and dill air controls (08t-028), the latter of which was investigated by odi in pe08-036 and ea08-022.the defect conditions addressed by the aftermarket tire valve recalls both involved inadequate resistance to ozone cracking due to issues with the supply of anti-ozonant chemicals to topseal for a period from july to mid-november 2006.the aftermarket valves were compounded with a blend of epdm and natural rubber, using a relatively low percentage of epdm (epdm provides inherent resistance to ozone cracking).hence, the need for anti-ozonant chemicals and the problems with cracking when those chemicals were missing or out of specification in some lots of valves.both recall campaigns involved inspection programs to identify and replace valves with visible surface cracking.although the topseal valves supplied to ford also appear to have been affected by the anti-ozonant supply issues in mid to late-2006, ford indicated that its valves were made at a different topseal production line and were compounded with a higher percentage of epdm rubber to meet more stringent specifications from ford.odi's analysis of complaint and warranty data provided by ford showed that problems with cracked tire valves were significantly higher for my 2007 vehicles produced from december 2006 through march 2007.ford responded by implementing changes in its material specifications for snap-in rubber tire valves and also increasing the quality and acceptance standards for valves imported for use in its vehicles.while the complaint and warranty claim rates are elevated for subject vehicles produced from december 2006 through march 2007, the rates of leaking valves are well below one percent of production for each of the peak months for all of the affected models.a substantial majority of the subject vehicles are equipped with tire pressure monitoring systems (TPMS) which warn the driver when any tire pressures drops below 25 percent of recommended inflation pressure. As outlined in a letter to odi dated april 6, 2009, ford has agreed to send letters to owners of certain my 2007 and 2008 ford, lincoln and mercury vehicles to provide information about the cracking concern. Letters will be sent to owners of vehicles built from november 2006 through may 2007.owners can opt for a free dealer inspection.valves exhibiting surface cracks or air leakage related to ozone attack will be replaced by ford under its normal warranty terms.ford expects to send the letter by approximately mid-may 2009. Based on the use of TPMS in the majority of subject vehicles and the relatively low rates of repairs associated with leaking valves and resultant tire damage, odi believes that the actions ford has agreed to take will provide effective and expeditious resolution for vehicles that were built during the period when valves with inadequate resistance to ozone cracking were most likely to have been used in vehicle production.further investigation of this matter would not be an efficient allocation of agency resources.accordingly, this investigation IS closed.the closing of this investigation does not constitute a finding by nhtsa that a safety-related defect does not exist.the agency will continue to
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10235153For 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identification number (VIN) from a different vehicle. Most modules on these affected vehicles are VIN/vehicle specific and hardware variations between modules do exist. Swapping a module from a vehicle or ordering a module using a different vehicle/VIN can cause ineffective repairs and additional vehicle down time. Make sure all appropriate Workshop Manual (WSM) procedures are followed when diagnosing the condition prior to all module replacements and only order modules using the correct VIN.
- 10109070The Powertrain Control/Emissions Diagnosis (PC/ED) manual has been revised for diagnosing electronic throttle bodies (ETBs). The ETC_ACT and ETC_DSD PIDs should not used to diagnose possible ETB concerns. The IDS has a limited refresh rate when reading these PIDs and cannot display quickly enough to validate a concern. The PCM automatically monitors these inputs more accurately and will set diagnostic trouble codes (DTCs) when appropriate. Using these PIDs for diagnostics will lead to inaccurate results and improper ETB replacements. If a concern is intermittent and no DTCs are present, refer to historical DTCs and the PC/ED, Section 3 No DTCs Present Index chart for further information.
- 10057723Ford: a job aid was developed and now available for the ptu internal or external fluid leakage for all wheel drive vehicles.
- 10044907Ford: some model vehicles would lose 2ND and 4TH gear on a CD4E transmission. Model escape 2007-2008.
- 10039244Ford: there IS excessive engine or exhaust noise, or an exhaust odor due to an exhaust leak. There will be no warning codes or lights. 2007-2008 escape/mariner.
- 10039053Ford: if there IS an intermittent lack of power, surge, or hesitation while driving the brakes will override acceleration.
- 10033726Ford/mercury: new service kit available for accelerator cable to pedal connection. Some vehicles may require the accelerator cable to accelerator pedal connection repaired. A new service clip has been released for use, in lieu of replacing the cable and/or pedal assemblies.
- 10032244Ford/mercury/lincoln: some vehicles equipped with a 6F50 transaxle , with any output shaft speed (oss) sensor or turbine shaft speed (tss) sensor diagnostic trouble code(s) (dtcs) p0715, p0717, p0720, p0721, p0722 and/or harsh engagements, no upshift, fifth gear only, could have an intermitten short in the oss or tss sensor.
- 100248452005-08 escape/escape hybrid/mariner - 2006-08 mariner hybrid - wheel speed sensor ring replacement procedure update to workshop manual.
- 10024841Slow fuel fill and/or dtc p0451.
- 10024695Multiple vehicle lines - intermittent pcm, fuel pump, ign. Coil, a/c, ABS or fog lamp operation.
- 10024326Malfunction indicator lamp (mil) on with diagnostic trouble code (dtc) u2062 (hybrid only).
- 10023295Multiple vehicle lines - intermittent pcm, fuel pump, ign, coil, a/c, ABS or fog lamp operation.
- 100232782005-2008 escape hybrid and 2006-2008 mariner hybrid vehicles are not E-85 compatible.
- 10023255Service harness installation - corrosion of a resistor in the battery power unit. Also have an owner's letter.
- 10022672Cold climate slow fuel fill.
- 10022235Slow fuel fill due to clogged vent.
- 10021601Engine stalling on engagement/stopping.
- 10021051Possible engine damage - install special service tools prior to removing crankshaft pulley bolt.
- 10021046Driveability concerns and/or dtcp0340 - inspect crankshaft pulley.
- 10021041Misfire dtc's p0316, p0300, p0301, p0302, p0303, and p0304.
Every Ford Escape model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.