2011 Ford Escape
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Ford › Escape › 2011
These records cover every 2011 Ford Escape. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2011 Ford Escape. Newest first.
Ford Motor Company (Ford) is recalling certain model year 2010-2012 Ford Escape vehicles manufactured February 26, 2009, to April 29, 2012, and 2010-2011 Mercury Mariner vehicles manufactured February 25, 2009, to December 12, 2010. On vehicles with a 3.0L engine, the Fuel Delivery Module (FDM) may crack, causing a fuel leak.
Risk and remedy
Risk
A fuel leak in the presence of an ignition source increases the risk of a fire.
Remedy
Ford will notify owners, and dealers will replace the FDM flange with one that has a redesigned fuel supply port, free of charge. Remedy parts are currently unavailable. Interim notices were mailed to owners on December 13, 2016. Owners will receive a second notice when remedy parts become available. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 16S41.
The Timken Company (Timken) is recalling certain aftermarket front wheel bearings, part number 510072, sold from January 22, 2015, to May 21, 2015, to be used as service parts on 2001-2012 Ford Escape, 2001-2011 Mazda Tribute, and 2005-2011 Mercury Mariner vehicles. The affected wheel bearings have incorrect dimensions of a 42mm bore, 76mm outer dimension…
Risk and remedy
Risk
Use of an incorrectly sized wheel bearing can adversely affect the braking and steering of the vehicle, increasing the risk of a crash.
Remedy
Timken has begun notifying distributors who will offer purchasers replacement wheel bearings, free of charge. The recall began on May 21, 2015. Owners may contact Timken customer service at 1-866-984-6536.
Ford Motor Company (Ford) is recalling certain model year 2008-2011 Ford Escape and Mercury Mariner vehicles manufactured August 18, 2006, through September 11, 2010. The affected vehicles have a steering torque sensor that may not be able to properly detect driver steering input. As a result, the system could remove the Electric Power Steering (EPS)…
Risk and remedy
Risk
If power steering assist is lost, greater driver effort would be required to steer the vehicle at low speeds, increasing the risk of a crash.
Remedy
Ford will notify owners, and dealers will update the software for the power steering control module (PSCM) and the instrument cluster module, free of charge. If a vehicle shows a history of a loss of the torque sensor signal or fault codes relating to the PSCM when the vehicle is brought in for the recall remedy, the affected components will be replaced, free of charge. The recall began on July 18, 2014. Owners may contact Ford customer service at 1-800-392-3673. Ford's number for this recall is 14S05.
Owner complaints
1,319 complaints38 involved a crash7 involved a fire38 injuries
What owners report most
Latest complaints
- Steering
Power steering repeatedly fails during normal driving conditions. It is resolved by putting the vehicle in park and restarting. This has occurred spontaneously and unpredictably while driving on residential roadways, commercial roadways, highways and parking lots. This is potentially deadly if…
Power steering repeatedly fails during normal driving conditions. It is resolved by putting the vehicle in park and restarting. This has occurred spontaneously and unpredictably while driving on residential roadways, commercial roadways, highways and parking lots. This is potentially deadly if power steering fails during normal or necessary evasive driving. I've reported this problem to a Ford Dealership Service department in Versailles Kentucky and they do not want to take action on the issue. I am happy to have the vehicle inspected. This issue is the exact same issue as recall number 14SO5, however my vehicle is one month removed from that specific recall. It is probable that the faulty Torque Control Sensor was manufactured in such large quantities that it was installed in my vehicle and many others like it. It is likely there are other faulty torque sensors on the road, proving dangerous to anyone driving.
- Steering
The contact owns a 2011 Ford Escape. The contact stated that while driving at 25 MPH, the power steering assist became inoperable, requiring greater effort to steer the vehicle. The failure mileage was approximately 169,781.
- Electrical system · Steering
My 2011 ford escape is experiencing symptoms of the recall of the faulty Electric Power Steering (EPS) torque sensor. Its not often, but when I turn on the car I wont have power steering but when I turn it off and turn it back on the power steering works. Is there anyway you could open/put a recall on my 2011 ford escape.
- Steering · Suspension
I have a 2011 Ford Escape AWD 3.0 engine. I took it for NY state inspection and it fails due the right side front subframe is rusted and unsafe. Ford has a recall on models up to 2004 but this vehicle has the same issue of the A/C draining on it causing the rust. I have been an auto tech for over…
I have a 2011 Ford Escape AWD 3.0 engine. I took it for NY state inspection and it fails due the right side front subframe is rusted and unsafe. Ford has a recall on models up to 2004 but this vehicle has the same issue of the A/C draining on it causing the rust. I have been an auto tech for over 48 years, retired now, and strongly feel this should be a major concern and covered at least 50% by Ford. This design flaw and the fact that I live in a state that uses salt in the winter on the roads, I feel there is nothing I could have done to prevent this from happening.
- Steering
The contact owns a 2011 Ford Escape. The contact stated that while operating the vehicle, the vehicle lost power steering functionality, and the steering wheel became difficult to turn in either direction. The vehicle was taken to the local mechanic, who diagnosed that the steering torque sensor…
The contact owns a 2011 Ford Escape. The contact stated that while operating the vehicle, the vehicle lost power steering functionality, and the steering wheel became difficult to turn in either direction. The vehicle was taken to the local mechanic, who diagnosed that the steering torque sensor had failed and needed to be replaced. The vehicle was not yet repaired. The manufacturer and local dealer were notified of the failure, but no assistance was provided. The contact was informed that the VIN was not included in NHTSA Campaign Number: 14V284000 (STEERING). The contact stated that the vehicle had experienced the failure listed in the recall. The failure mileage was 150,000.
- Structure › Body
I went for an oil change and my mechanic found that the subframe/cross member assembly was almost rusted through. Very dangerous. Needs to be replaced. Found out this is very common with the Ford Escape model of these years. Will cost thousands to repair.
- Electrical system · Seat belts · Unknown or other
The rear hatch clicks like it wants to open but doesn't release the latch to open it and I can't get to the place to release an lower the spare tire which is safety concern to me. Also the driver side seat belt casing broke and doesn't release every time you push button to unlatch it which can…
The rear hatch clicks like it wants to open but doesn't release the latch to open it and I can't get to the place to release an lower the spare tire which is safety concern to me. Also the driver side seat belt casing broke and doesn't release every time you push button to unlatch it which can cause serious problems if in an accident I had a individual garage guy inspect an said he had replaced several latch mechanisms in the hatch for several escape owners i can't afford to have it replaced at this time. If we're to have a flat in extreme heat or extremely cold weather it can cause heat stroke or hypothermia. There were no warning signs one day wouldn't open. An seatbelt wouldn't release one day until pushed so hard the casing broke off an could push clip inside
- Steering
The steering shaft torque sensor unexpectedly malfunctioned while driving resulting in a loss of steering. There was no indication that this would happen, no check engine light was on, and no symptoms prior to the incident. The vehicle is undrivable due to a lack of steering and was diagnosed by an independent garage. The steering shaft torque sensor is recalled for other 2010 Ford Escapes, but not this one.
- Steering
I was traveling at 20 mph and slowed to make a turn when the steering wheel took two hands to turn the wheel ... I knew it was a power steering issue. Happend all of a sudden with no warning and I was stuck in the middle of an intersection trying to turn around to go back home
- Steering
For months my vehicle has had intermittent loss of power steering making it nearly impossible to control direction. On Jan. 29, 2026, I ran into the back of a vehicle that stopped suddenly and due to sudden power steering loss, I wasn't able to swerve and avoid collision. I was issued an…
For months my vehicle has had intermittent loss of power steering making it nearly impossible to control direction. On Jan. 29, 2026, I ran into the back of a vehicle that stopped suddenly and due to sudden power steering loss, I wasn't able to swerve and avoid collision. I was issued an infraction for this incident and had to file an insurance claim to repair the front end damage to my vehicle. I brought my vehicle to an independent repair shop who confirmed the issue and said the entire steering column would need to be replaced and would cost approximately $3,000.00. I was also notified that Ford issued Safety Recall Campaign/NHTSA #14S05/14V284 for this exact issue. I contacted the Ford dealership where I purchased my vehicle and they said my VIN is not included in that recall. It seems too coincidental that my 2011 Ford Escape is experiencing the very same issue that prompted a safety recall for thousands of 2008-2010 Ford Escapes but not mine. I contacted Ford customer service and was issued escalation Case #CXH-07666011-H9L5H3.
- Steering
The contact owns a 2011 Ford Escape. The contact stated that while the vehicle was parked and occupied, while starting the vehicle the contact became aware that the vehicle had lost power steering functionality. The contact turned off and restarted the vehicle and the vehicle operated as intended.…
The contact owns a 2011 Ford Escape. The contact stated that while the vehicle was parked and occupied, while starting the vehicle the contact became aware that the vehicle had lost power steering functionality. The contact turned off and restarted the vehicle and the vehicle operated as intended. Neither an independent mechanic nor a dealer was contacted. The vehicle was not taken to a dealer nor an independent mechanic to be diagnosed. The vehicle was not repaired. The manufacturer was notified of the failure but offered no assistance. The approximate failure mileage was 161,420.
- Electrical system · Steering
Power steering went out all of a sudden
- Steering
The contact had performed service on the 2011 Ford Escape. The contact stated that the owner had experienced unintended loss of power steering functionality, making the steering wheel difficult to turn in either direction. The failure was intermittent. During the failure, the check engine warning…
The contact had performed service on the 2011 Ford Escape. The contact stated that the owner had experienced unintended loss of power steering functionality, making the steering wheel difficult to turn in either direction. The failure was intermittent. During the failure, the check engine warning light illuminated. Additionally, while the vehicle was idling, the steering wheel was turning from right to left independently. While servicing the vehicle, the DTC: B2278 was displayed. The contact was informed that the steering torque sensor needed to be replaced. The vehicle was not yet repaired. The local dealer and manufacturer were notified of the failures. The contact was informed that the VIN was not included in NHTSA Campaign Number: 14V284000 (STEERING). The failure mileage was 199,003.
- Steering
Torque sensor. No warning. Has not been looked at by a mechanic. Was working fine when I parked it. Came back out and it was steering funny and making a grinding sound
- Electrical system · Structure › Body · Unknown or other
Component: Driver-side door latch and lock assembly. The driver-side door latch appears to have failed, preventing the door from opening from both the inside and outside and creating an occupant entrapment risk. The failure is fully reproducible and ongoing. The condition first occurred without…
Component: Driver-side door latch and lock assembly. The driver-side door latch appears to have failed, preventing the door from opening from both the inside and outside and creating an occupant entrapment risk. The failure is fully reproducible and ongoing. The condition first occurred without any prior warning signs, messages, or symptoms and has persisted for more than a day without resolving. Although the vehicle responds to unlock commands from the key fob, keypad, and interior door controls with normal audible confirmation, the driver door frequently remains unable to open. Failure behavior includes: •The driver door cannot be opened from inside the vehicle, preventing occupant exit. •The door also cannot be opened from the outside during these events. •An occupant became trapped inside and had to crawl across the vehicle and exit through the passenger side. •The vertical lock indicator moves between locked and unlocked positions, but the latch does not release. •The electronic systems appear functional, yet the mechanical latch does not respond. •Using the physical key can sometimes force the lock cylinder past a mechanical click point, temporarily allowing the door to open; however, this places the mechanism into abnormal states where the door may remain permanently unlocked or, when turned in the opposite direction, cannot be opened at all regardless of unlock attempts. •All other vehicle doors operate normally. Video evidence documenting the failure is available. This condition presents a serious safety concern because occupants could become trapped inside the vehicle during an emergency or after a crash, delaying rescue. The latch mechanism is a critical safety component that consumers cannot reasonably inspect, predict, or maintain. Given the life-safety implications of a door that cannot be opened from either side, this issue warrants investigation for potential defect trends.
- Electrical system · Engine · Steering
I purchased this vehicle on 10/16/25 through Affordable Auto Sales 692 Pleasant St Fall River Ma as it is a buy here pay here. It had 97,626 miles on it day of purchase. I noticed trouble with power steering as it is electric and kept locking up and asked several times to fix it. It didn't get…
I purchased this vehicle on 10/16/25 through Affordable Auto Sales 692 Pleasant St Fall River Ma as it is a buy here pay here. It had 97,626 miles on it day of purchase. I noticed trouble with power steering as it is electric and kept locking up and asked several times to fix it. It didn't get repaired until the week before Christmas. On 1-10-26, took it for first oil change and it had 100,837 miles in total I put 3,211 miles on it. The mechanic called me into the garage and showed me 3 things that were critically wrong with the vehicle. It had severe rot in front and rear, mostly rear, the transmission had a significant leak, and the power steering was still not properly fixed. The mechanic informed me that the dealership had not done their safety inspection and this was deemed an unsafe vehicle and I should not be driving it. I brought it to the attention of Affordable Auto sales and they are accusing me of the damage. The owner Lucy Sousa also changed the mileage on the paperwork saying I put 20,000 on itinerary 2 months time. She changed it to 82,294 which is false. I have my inspection report to show accurate mileage. I no longer have this vehicle. I returned it to them. I bought another vehicle from a different dealer.
- Steering
The contact owns a 2011 Ford Escape. The contact stated that upon starting the vehicle, the steering wheel failed to operate as intended. There was no warning light illuminated. The contact stated that the steering wheel was extremely tight, and excessive force was needed to steer the vehicle. The…
The contact owns a 2011 Ford Escape. The contact stated that upon starting the vehicle, the steering wheel failed to operate as intended. There was no warning light illuminated. The contact stated that the steering wheel was extremely tight, and excessive force was needed to steer the vehicle. The vehicle was taken to an independent mechanic, where it was diagnosed with a defective steering column that needed to be replaced. Upon investigation, the contact discovered NHTSA Campaign Number: 14V284000 (Steering) and associated the failure with the recall. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 35,000.
- Steering
My power steering has failed five times in the last year. Yes, my vehicle is available for inspection. The power steering went out on me while I was driving, making it very hard to turn my steering wheel. Took it to a Ford dealer last year. They said they couldn't find anything wrong with it. It is very unpredictable when this will happen. It doesn't happen every time I drive it. Don't feel very safe driving!
- Steering
i have a cliking nose in my steering wheel when i am driving
- Steering
My young daughter lost control of our 2011 FORD HYBRID ESCAPE vehicle with 94770 miles after starting the vehicle on moving off. She crashed into the sidewalk to avoid hitting pedestrians. ALL ELECTRIC POWER STEERING ASSISTANCE was lost. Car was taken to AutoNation Ford, St Petersburg, FL. Service…
My young daughter lost control of our 2011 FORD HYBRID ESCAPE vehicle with 94770 miles after starting the vehicle on moving off. She crashed into the sidewalk to avoid hitting pedestrians. ALL ELECTRIC POWER STEERING ASSISTANCE was lost. Car was taken to AutoNation Ford, St Petersburg, FL. Service personnel stated and provided documentation showing that there was no recall for my daughter's vehicle VIN. However, there were recalls for this similar problem on other Ford vehicles and FORD HYBRID ESCAPE vehicles like hers. Please see attachment. FORD SAYS THIS 2011 VEHICLE IS NOT A PART OF THE RECALL FOR THIS DANGEROUS HAZARD AND REFUSES TO FIX THE PROBLEM
- Steering
The contact owns a 2011 Ford Escape. The contact stated that while driving at various speeds, the steering wheel intermittently failed to turn in the intended direction. There was no warning light illuminated. The contact stated that while driving 50 MPH, the power steering assist failed to operate…
The contact owns a 2011 Ford Escape. The contact stated that while driving at various speeds, the steering wheel intermittently failed to turn in the intended direction. There was no warning light illuminated. The contact stated that while driving 50 MPH, the power steering assist failed to operate as needed. The steering wheel became extremely tight, and excessive force was needed to drive the vehicle while avoiding crashing into another vehicle. The contact called three dealers and was informed that the vehicle was not included in NHTSA Campaign Number: 14V284000 (Steering). The contact ordered a power steering torque rotation sensor and planned for an independent mechanic to repair the vehicle. The vehicle was not repaired. The manufacturer was made aware of the failure but provided no assistance. The failure mileage was approximately 45,000.
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2011 Ford Escape. The contact stated that while attempting to register the vehicle, it was discovered that there was a mileage discrepancy. The vehicle was a dealer sale. At the time of purchase, the vehicle mileage was 101,000, and at the time of programming the keys, it was discovered that the mileage was 122,765. The VIN was incomplete.
- Steering
The contact owns a 2011 Ford Escape. The contact stated that while his wife was driving 40 MPH, the steering wheel became difficult to turn. The contact stated that several messages were displayed. A dealer was contacted. The vehicle was not taken to a dealer or independent mechanic to be…
The contact owns a 2011 Ford Escape. The contact stated that while his wife was driving 40 MPH, the steering wheel became difficult to turn. The contact stated that several messages were displayed. A dealer was contacted. The vehicle was not taken to a dealer or independent mechanic to be diagnosed. The vehicle was not repaired. The contact related the failure NHTSA Campaign Number: 19V632000 (STEERING); however, the VIN was not included in the recall. The manufacturer was not notified of the failure and opened a case. The failure mileage was 251,000.
- Steering
Subject: Urgent Safety Concern – Request for Recall Coverage Assistance To Whom It May Concern, I am writing with a heartfelt and urgent request regarding a serious malfunction in my vehicle's steering column, which has made it extremely difficult to turn. This presents a clear and dangerous safety…
Subject: Urgent Safety Concern – Request for Recall Coverage Assistance To Whom It May Concern, I am writing with a heartfelt and urgent request regarding a serious malfunction in my vehicle's steering column, which has made it extremely difficult to turn. This presents a clear and dangerous safety hazard, particularly on expressways and in everyday driving when the ability to maneuver quickly is critical. My safety, my child’s safety, and the safety of others has been compromised due to this issue. The vehicle has been thoroughly inspected by a mechanic, and there were no warning lights or prior indicators of an impending failure. I have learned that there is an active recall related to this exact issue for vehicles manufactured between 2008 and September 2011. My vehicle was manufactured in January 2011, just a few months before the cut-off. To be denied assistance over a matter of months feels deeply unfair and disheartening — especially when the failure matches the recall description exactly. I am a single parent who depends on this vehicle for work and daily life. The financial burden of repairs right now is overwhelming, especially given the rising cost of living, inflation, and how expensive everything has become. I’m simply trying to keep my family safe and get to work. I am respectfully and desperately asking you to reconsider support and allow my vehicle to be included in this recall, as it clearly qualifies based on the issue — if not technically by the cut-off date. Please don’t let a few months be the reason help is denied when it’s needed most. Here is my vehicle information: VIN: [XXX] Make/Model/Year: 2011 Ford Escape Manufacture Date: January 21, 2011 Thank you for your time, understanding, and attention to this matter. I truly hope you can see the urgency and importance of this request. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Steering
The contact owns a 2011 Ford Escape. The contact stated while driving at an undisclosed speed, the steering wheel failed to turn in the intended direction. In addition, the contact stated that the steering wheel became extremely tight. The vehicle was taken to an independent mechanic where it was…
The contact owns a 2011 Ford Escape. The contact stated while driving at an undisclosed speed, the steering wheel failed to turn in the intended direction. In addition, the contact stated that the steering wheel became extremely tight. The vehicle was taken to an independent mechanic where it was diagnosed with a failed power steering module. The contact was advised that the power steering module needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure but provided no assistance. The contact referenced NHTSA Campaign Number: 14V284000 (Steering) as a possible cause for the failure; however, the VIN was not included in the recall. The contact was advised to contact the NHTSA Hotline to report the failure. The failure mileage was unknown.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Loss of power steering while driving
On May 27, 2014, amended June 2, 2014, Ford Motor Company (Ford) submitted a Defect Information Report (DIR) to NHTSA describing a safety defect that may result in a sudden loss of power steering assist while driving in approximately 746,067 model year (MY) 2008 through 2011 Ford Escape vehicles equipped with electric…
On May 27, 2014, amended June 2, 2014, Ford Motor Company (Ford) submitted a Defect Information Report (DIR) to NHTSA describing a safety defect that may result in a sudden loss of power steering assist while driving in approximately 746,067 model year (MY) 2008 through 2011 Ford Escape vehicles equipped with electric power assisted steering (NHTSA 14V-284, Ford 14S05). Ford's DIR described the defect condition as a poor signal to noise ratio [SNR] in the torque sensor within the Electric Power Assisted Steering (EPAS) system [which] does not allow the PSCM to determine the driver's steering input. When the system detects this fault condition, it transitions the EPAS system to the fail-safe/manual steering mode.Ford's DIR indicates that loss of power steering assist while driving would require higher steering effort at lower vehicle speeds, which may result in an increased risk of a crash.Ford's remedy instructs dealers to check the Power Steering Control Module (PSCM) for Diagnostic Trouble Codes (DTCs) to determine the proper repair procedure. If no DTCs are present, dealers are to update the PSCM and instrument cluster module software. The updated PSCM software changes the torque sensor fault strategy so that the SNR condition does not result in a loss of power steering assist while driving.In addition, audible and visual warnings are provided for torque sensor faults.If DTCs indicating faults in the torque sensor, PSCM or Power Steering Motor (motor) are present in the initial recall inspection, the dealer performs the following repairs: 1) replaces the torque sensor for torque sensor faults (DTC B2278); or 2) replaces the steering column for faults related to the PSCM (DTC B1342) or motor (DTC B2277).Continued in attachment pages
- Electronic Throttle Body Malfunction
On February 21, 2013, the Office of Defects Investigations (ODI) opened Preliminary Evaluation PE13-003 to investigate allegations of electronic throttle body (ETB) failures resulting in sudden reduction of engine power in model year (MY) 2009-2013 Ford Escape, Fusion, Mariner and Milan vehicles. During this…
On February 21, 2013, the Office of Defects Investigations (ODI) opened Preliminary Evaluation PE13-003 to investigate allegations of electronic throttle body (ETB) failures resulting in sudden reduction of engine power in model year (MY) 2009-2013 Ford Escape, Fusion, Mariner and Milan vehicles. During this investigation, Ford identified a condition in subject vehicles equipped with 2.5L and 3.0L engines that may result in a sudden reduction of engine power.According to Ford, the ETB internal motor contacts may develop a high resistance material buildup condition on the commutator, resulting in intermittent electrical connectivity and reduced engine power. When this condition occurs, the Malfunction Indicator Lamp (MIL) or Wrench light will illuminate and the vehicle may enter a limited limp home mode.Ford?s trade name for the feature is Failure Mode Effects Management (FMEM) mode.In this mode, engine power and vehicle speed are reduced, while full function of the power steering, power braking, lighting, and climate control systems are maintained.ODI?s complaint analysis indicate that the predominant failure mode involved reduced motive power associated with the limited limp home mode with engine speeds limited to approximately 900 RPM. Analysis of warranty claims provided by Ford identified 59,807 claims related to ETB replacements and approximately 50 percent of claims are associated with diagnostic trouble codes (DTC) P2111, Throttle Body Stuck Open, and P2112, Throttle Body Stuck Closed.Ford described several factors where the ETB motor may fail resulting in DTCs P2111 or P2112 but the failure is not an existing stuck open or closed ETB valve position.According to Ford, the ETB control strategy provides the driver with three FMEM modes that allow varying degrees of vehicle mobility depending on the severity of the fault detected.DTCs associated with stuck open or closed throttle valves are designated the highest failure severity resulting in engine speeds limited to high idle corresponding to the limited limp home mode.Vehicles are not likely to unexpectedly stall as a result of this condition, but drivers may characterize the reduced functionality as a stall, even though their vehicle may still has motive capability.Other FMEM limp modes may result in reduced engine performance but will maintain vehicle speed above 20mph. During this investigation, Ford and its suppliers, Delphi and Igarashi, updated the powertrain control module (PCM) software to include a throttle body motor cleaning cycle during key-on and modified the ETB internal motor components design, surface finish and material composition to improve durability. Additionally, Ford developed a remedy procedure and issued a special Customer Satisfaction Program (CSP) 13N03 extending the ETB warranty coverage and instructing dealers to update the powertrain calibration to improve vehicle performance in the event that intermittent electrical connectivity of the throttle body motor contacts occurs. The program extends the coverage for up to 10 years of service or 150,000 miles from the warranty start date of the vehicle, all vehicles are eligible for the program through January 31, 2015 regardless of mileage.Owners of the affected vehicles will be contacted by mail to take their vehicle to a Ford dealer who will reprogram the PCM to the latest calibration. The bulletin was sent to dealers on January 17, 2014 and the owner letter mailing began on January 27, 2014. See the investigative file for copies of Ford's bulletin and owner letter. This preliminary evaluation is closed. The closing of this investigation does not constitute a finding that
- Electronic Throttle Body Malfunction
In a letter dated August 30, 2012, The North Carolina Consumers Council (NCCC) petitioned the National Highway Traffic Safety Administration (NHTSA) to initiate a defect investigation of alleged electronic throttle body failures resulting in engine stall or surge while driving in model year (MY) 2005 through 2012 Ford…
In a letter dated August 30, 2012, The North Carolina Consumers Council (NCCC) petitioned the National Highway Traffic Safety Administration (NHTSA) to initiate a defect investigation of alleged electronic throttle body failures resulting in engine stall or surge while driving in model year (MY) 2005 through 2012 Ford Escape vehicles. On October 2, 2012 the Office of Defects Investigation (ODI) opened a Defect Petition DP12-006 to evaluate whether to grant or deny the petition. The petition is hereby granted on certain model years. The NCCC letter cites two complaints of stall while driving in MY 2009 Ford Escape vehicles that were diagnosed as failed throttle bodies with diagnostic trouble codes (DTC) P2111, Throttle Body Stuck Open, and P2112, Throttle Body Stuck Closed. The petitioner indicates that the owners of both vehicles reported experiencing repeated incidents of stalling and engine surging. According to Ford, Escape non-hybrid vehicles are equipped with Electronic Throttle Body (ETB) assemblies beginning with MY 2009. Vehicles manufactured between June 22, 2009 and October 15, 2009 may contain contaminated printed circuit boards (PCB) with plating variations. Plating variations could lead to a lack of continuity in the throttle position sensor circuit where P2111 and/or other DTCs would be generated and stored. Ford and its electronic throttle body supplier, Delphi, modified the PCB manufacturing process and issued a technical service bulletin (TSB) 09-23-5. Vehicles produced after October 15, 2009 incorporated ETBs manufactured with a PCB process that resolved this condition. ODI's analysis identified a total of 123 unique reports indicating allegations of reduced motive power or vehicle stall. Depending on the condition of throttle control system malfunction, a driver may experience varying levels of reduced engine performance associated with three limp home modes. In two limp modes, reduced engine performance may maintain vehicle speeds above 20mph while the third is a limited limp home mode with engine speeds limited to approximately 900 RPM. Allegations of stall appear to be related to the limited limp home mode. Vehicles are not likely to unexpectedly stall as a result of this condition, but drivers may characterize the reduced functionality as a stall, even though their vehicle may still has motive capability. Allegations of vehicle surge appear to be related to limp home mode operation. Complaints alleging surge are most likely related to engine RPM fluctuations at low vehicle speeds or idle as the control system engages to prevent engine stall. In limited limp mode, rough-idle conditions may exist while the control system attempts to modulate engine RPMs once the vehicle reaches a reduced speed to maintain approximately 900 RPM. Separately, ODI received 59 complaints alleging incidents of engine stall while driving in model year (MY) 2010-2011 Ford Fusion vehicles. Approximately 60 percent (36) of the incidents occurred at speeds of 40 miles per hour or more. Eighty percent of complaints (47) were received beginning March 2012 and 14 complaints reported that the throttle body was replaced or DTCs associated with limp home modes. Additionally, Ford issued TSB 10-21-6 addressing DTCs associated with idle speed drops and limited limp home mode. The petition is granted on certain model years.Preliminary Evaluation PE13-003 has been opened to assess the scope, frequency and potential safety consequences associated with the alleged defect.See full copy of the closing resume for this defect petition for list of the VOQs associated with the defect petition analysis.
- Rear Liftgate Window Glass Breakage
In its response to the agency, Ford acknowledged a higher than normal level of glass breakage incidents in the model year (MY) 2010 to early-build MY 2011 subject vehicles.The incidentsoccurred when the liftgate glass was being opened, or more typically while being closed, but in both cases while the vehicle was…
In its response to the agency, Ford acknowledged a higher than normal level of glass breakage incidents in the model year (MY) 2010 to early-build MY 2011 subject vehicles.The incidentsoccurred when the liftgate glass was being opened, or more typically while being closed, but in both cases while the vehicle was stationery, i.e., not moving on the roadway.Additionally failures often occurred during early morning hours when ambient and/or liftgate glass temperatures may have been lower.Ford advised that it investigated the failures but failed to identify an anomaly in the glass manufacturing process (which is often a factor in glass breakage trends ODI investigates) that could explain the reports.It did however identify a potential thermal expansion/compression condition in the mounting of the rear wiper motor to the liftgate glass.Starting at MY 2008 vehicle production the motor was attached to the glass using an adhesive.Ford revised that design to a nut and bolt type attachment in October 2010, during MY 2011 vehicle production.ODI's review of Ford data indicates that vehicles built after this change exhibit lower glass breakage rates.Among the 296 consumer complaints on the subject vehicles, ODI identified 15 injury incidents resulting in a total of 18 alleged injuries.All the injuries were minor in nature and consisted mainly of superficial skin cuts or minor lacerations, with two of the injury incidents occurring when vehicle owners were cleaning up broken glass.Additionally both the injury rate and report rate (including warranty claims) are low in comparison to similar investigations resulting in safety recalls (see PE04-045, MY 2002 Ford explorer liftgate glass failure, which resulted in NHTSA safety recall 04V442). In November 2010 Ford issued Technical Service Bulletin (TSB) 10-22-10 to address reports of liftgate glass breakage on all MY 2010 vehicles, and MY 2011 vehicles built through 10/15/2010, the date the above design revision was implemented.The TSB enables owners of affected vehicles to have a broken liftgate glass replaced under normal vehicle warranty, which would not otherwise be a warrantable failure, with the revised design liftgate glass.A safety-related defect has not been identified at this time and further use of agency resources does not appear to be warranted.Accordingly, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist.The agency will monitor this issue and reserves the right to take further action if warranted by the circumstances.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10254138All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
- 10235153For 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identification number (VIN) from a different vehicle. Most modules on these affected vehicles are VIN/vehicle specific and hardware variations between modules do exist. Swapping a module from a vehicle or ordering a module using a different vehicle/VIN can cause ineffective repairs and additional vehicle down time. Make sure all appropriate Workshop Manual (WSM) procedures are followed when diagnosing the condition prior to all module replacements and only order modules using the correct VIN.
- 102050086F35 Transmission - Fluid leak at left side halfshaft seal - built on or before 10/14/2013
- 10177599These SKUs are Exhaust Manifolds with Catalytic Converters. The customer communication requested return of unsold inventory due to a loss of CARB certification. These SKUs can no longer be sold as they do not meet CARB standards, but parts on vehicles are not effected.
- 10177598These SKUs are Exhaust Manifolds with Catalytic Converters. The customer communication requested return of unsold inventory due to a loss of CARB certification. These SKUs can no longer be sold as they do not meet CARB standards, but parts on vehicles are not effected.
- 10140323The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.
- 10138524The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.
- 10137113Replacing the original equipment SYNC/Navigation system with either an aftermarket SYNC/Navigation kit or modifying original SYNC/Navigation parts to provide additional features is not recommended nor supported on any Ford, Mercury or Lincoln vehicle. Only approved Genuine Ford accessories or originally installed systems are supported and certified to function correctly with other vehicle systems. If you suspect a system has been modified, the following resources can be used to verify original equipment: Monroney Label (Window Sticker), Professional Technician Society (PTS) OASIS tab select SYNC or HVBOM. For Genuine Ford accessories use: PTS Workshop Tab select Dealer Installed Accessory or Accessory Installation.
- 101365972010-2018 various vehicles equipped with SYNC or SYNC 3 may not function when attempting to find or use the Spotify app via AppLink. As of an update released on 1/15/2018 Spotify will no longer be supporting their AppLink integration. No repair attempts should be attempted to correct this concern.
- 10109070The Powertrain Control/Emissions Diagnosis (PC/ED) manual has been revised for diagnosing electronic throttle bodies (ETBs). The ETC_ACT and ETC_DSD PIDs should not used to diagnose possible ETB concerns. The IDS has a limited refresh rate when reading these PIDs and cannot display quickly enough to validate a concern. The PCM automatically monitors these inputs more accurately and will set diagnostic trouble codes (DTCs) when appropriate. Using these PIDs for diagnostics will lead to inaccurate results and improper ETB replacements. If a concern is intermittent and no DTCs are present, refer to historical DTCs and the PC/ED, Section 3 No DTCs Present Index chart for further information.
- 10091151Some 2008-2017 ford/mercury/lincoln vehicles equipped with sync may generate a vhr that identifies a concern with the brakes and suspension category indicating service IS required due to a brake system warning lamp being illuminated. If the park brake was applied when the vhr was gathering data from the major vehicle systems, the brakes and suspension message will be reported as the vhr looks for any warning lamps illuminated in the instrument cluster. Rerun the vhr with the engine on and vehicle in park, and ensure the park brake IS disengaged. If the sync vhr IS still reporting a concern to the customers sync owners account, refer to the appropriate workshop manual section for diagnosis by dtc or symptom. Starting in 2015 not all sync equipped vehicles support vhr, refer to the owners manual for vhr operation.
- 10090681Some 2008-2017 ford/mercury/lincoln vehicles equipped with sync may generate a vhr that identifies a concern with the brakes and suspension category indicating service IS required due to a brake system warning lamp being illuminated. If the park brake was applied when the vhr was gathering data from the major vehicle systems, the brakes and suspension message will be reported as the vhr looks for any warning lamps illuminated in the instrument cluster. Rerun the vhr with the engine on and vehicle in park, and ensure the park brake IS disengaged. If the sync vhr IS still reporting a concern to the customers sync owners account, refer to the appropriate workshop manual section for diagnosis by dtc or symptom. Starting in 2015 not all sync equipped vehicles support vhr, refer to the owners manual for vhr operation.
- 100752736F35 TRANSMISSION - FLUID LEAK AT LEFT SIDE HALFSHAFT SEAL BUILT ON OR BEFORE 10/14/2013 ISSUE Some 2009-2014 Escape, 2009-2011 Mariner, 2010-2014 Fusion, 2010-2011 Milan, 2012-2014 Edge/Explorer, and 2013-2014 Taurus/MKT/MKZ vehicles built on or before 10/14/2013 and equipped with a 6F35 automatic transmission may exhibit a fluid leak from the left hand (LH) transmission halfshaft seal due to wear on the transmission case bushing.
- 10058224Ford 2008-2012 escape/mariner: bulletin information regarding steering control module with dtc b2278, not required to have steering column replaced.
- 100581962008-2012 ford escape/mariner: service information involving the power steering control module with dtc b2278- steering column replacement IS not required.
- 10058067Ford 2009-2014 escape, 2010-2014 fusion, 2012-2014 edge, explorer, 2013-2014 taurus: lincoln 2013-2014 mkt,mkz: mercury 2009- 2011 mariner, 2010-2011 milan. Some vehicles equipped with 6F35 automatic transmission may exhibit a fluid leak from the left hand transmission halfshaft seal due to wear on the transmission case bushing.
- 10057873Ford fusion, milan, escape, mariner 2009-2013: customer satisfaction program throttle body extended coverage.
- 10057865Ford: after powertrain control module reprogramming, the malfunction indicator lamp (mil) IS on with several diagnostic trouble codes (dtc) p06b8, p068a, p2610, if key not left for 30 seconds in off position following programming on some model 2009-15 vehicles.
- 10057834Ford: no service action IS recommended for this condition. Please use at your discretion. Various 2010-2015 vehicles may experience a turbulence noise, similar to an helicopter noise, at highway speeds when the rear door window(s) or sunroof are open.
- 10057723Ford: a job aid was developed and now available for the ptu internal or external fluid leakage for all wheel drive vehicles.
- 10056711Ford/lincoln: there IS an extended warranty coverage for the loss of ABS speed signal related communication that disable obdii system monitors for pcm reprogramming. Model 2011-14 f-super duty, escape, taurus, fusion, MKT, MKZ.
- 10056710Mercury/ford: in one or more speed settings, electronic manual temperature control (emtc) a/c system IS warm and/or lack blower motor operation in settings due to damaged blower motor resistor caused by water entering heater and evaporator core housing. Model 2008-12 escape, mariner.
- 10056184Lincoln/ford: in powertrain control module (pcm), that allows anti lock brake system (ABS) and output shaft speed sensor (oss) signal faults, a software error has occur and disabled on board diagnostic (obd) monitors with no illumination of malfunction indicator lamp (mil). Model 2011-2014 f-super duty, escape, taurus,fusion, MKT, MKZ.
- 10056183Ford: the throttle body internal motor contacts may be contaminated, resulting in an electrical, intermittent, connectivity, causing malfunction indicator lamp (mil) or wrench light to be illuminated. Model 2009-2012 fusion, milan, escape, mariner. Updated 11/18/14.
- 10055355Ford: the wrench light will illuminate when 4X4 function IS inoperative due to active torque coupling solenoid coil wiring being broke, but a kit IS available to service rear axle assembly/rear drive unit (rdu), at lower level. Model 2008-2012 escape, mariner.
- 10055321Mercury/ford: on some vehicles, there IS a fluid leakage, coming from left hand (lh) halfshaft seal of the automatic transmission and a service kit IS available now, for repair. Model 2009-2012 escape, mariner, fusion, milan.
- 10054926Ford: throttle body will develop contamination on internal motor contacts resulting in an intermittent electrical connectivity and malfunction indicator lamp (mil) or wrench light will illuminate. Model 2009-2013 fusion, milan, escape, mariner. Updated 5/7/14.
- 10054916Ford/mercury: if diagnostic code b2278 IS stored in power steering control module (pscm), it needs replacing with torque sensor service kit that IS available and if not, does not apply. Model 2008-2012 escape, 2008-2011 mariner.
- 10054575Ford: on the left hand half shaft seal, there IS a fluid leak from the transmission because of wear on case bushing. Model 2009-2012 escape, 2009-2011 mariner, 2010-2012 fusion, 2010-2011 milan.
- 10053656Ford: due to an intermittent loss of rpm or lack of acceleration, in some vehicles, with illuminated wrench light, diagnostic trouble codes (dtcs) p2111, p2112 may or may not be stored in powertrain control module (pcm). Models 2009-12 escape, mariner, fusion, milan.
- 10053408Ford: on various vehicles with my touch,after any apim programming, replacement or disconnect from front display interface module (fdim), touchscreen calibration must be performed. Model years 2011-2013. No models listed.
- 10053063Mercury/ford: on some vehicles, the front seat track assemblies may show rust or corrosion and may need track assembly cleaned. Model 2009-2012 escape, mariner.
- 10052191Ford/lincoln/mercury: some vehicles may experience an illuminated mil or safety stop now message, or a no start condition or possible misfire or roughness at idling through 2000rpm or a lack of acceleration. Models 2009-12 escape, 2009-11 mariner, milan, 2010-12 fusion, 2011-14 mustangs, 2013 c-max, fusion, MKZ hybrid.
- 10044854Ford: vehicle's liftgate IS difficult to open or difficult to close.
- 10044540Ford: due to a possible leak in the internal check valve, the red brake lamp illuminates with diagnostic trouble code (dtc) c1015, c0101c or p1a1b with brake pedal feeling no change.
- 10044230Ford/mercury/lincoln: some vehicles exhibit a cold weather phenomenon where fluid has expelled out of vent on rear drive units (rdu) and fluid, on occasion, would burp out.
- 10043648Ford: the variable camshaft timing vct) solenoid movement may be temporarily restricted due to debris in engine oil that IS causing diagnostic trouble codes (dtcs).
- 10041932Ford: after refueling vehicle, would be hard to start, runs rough and an audible clicking noise can be heard.
- 10041258Ford service campaign: see document search button for owner letter. 2011 mariner/escape. Vehicles were shipped without proper emissions standards.
- 10040948Ford: there may be a leaking/stuck canister purge valve which can cause multiple driving systems. The malfunction light may be on with or without stored trouble codes.
Every Ford Escape model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.