2021 Ford F-250 SD
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Ford › F-250 SD › 2021
These records cover every 2021 Ford F-250 SD. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
13 recalls name the 2021 Ford F-250 SD. Newest first.
Ford Motor Company (Ford) is recalling certain 2020-2022 F-Super Duty F250, F350, F450, F550, 2021-2022 F600, and 2022 F750 vehicles previously repaired incorrectly under recall number 24V957. Biodiesel deposits may form on the pump drivetrain roller components, which could lead to failure of the high pressure fuel pump.
Risk and remedy
Risk
High pressure fuel pump failure can cause a loss of drive power, increasing the risk of a crash.
Remedy
Dealers will update the powertrain control module (PCM) software, free of charge. Owner notification letters were mailed mailed April 7, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S17. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on March 18, 2026.
Ford Motor Company (Ford) is recalling certain 2020-2022 F-250 SD, F-350 SD, and F-450 SD vehicles. The 360-degree view camera system may not display a rearview image properly in certain lighting conditions.
Risk and remedy
Risk
A rearview camera image that does not display properly can reduce the driver’s view behind the vehicle, increasing the risk of a crash.
Remedy
Dealers will update the image processing module software, free of charge.This will be a phased campaign, with the remedy becoming available in different phases based on model years. Interim letters notifying owners of the safety risk were mailed on October 30, 2025. Additional letters will be mailed once the remedy is available on each phase. Owner notification letters were mailed May 19, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25SA8. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on October 13, 2025.
Ford Motor Company (Ford) is recalling certain 2020-2021 F-250, F-350, and F-450 vehicles. The steering column upper shaft may detach from the steering column and result in a loss of steering control.
Risk and remedy
Risk
A loss of steering control increases the risk of a crash.
Remedy
Dealers will inspect the steering column, and repair or replace the upper shaft as necessary, free of charge. Owner notification letters were mailed February 20, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S94. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning September 23, 2025.
Ford Motor Company (Ford) is recalling certain 2021-2023 Bronco, Explorer, Lincoln Aviator, F-250 SD, F-350 SD, F-450 SD, F-550 SD, 2021-2022 Lincoln Navigator, Mustang, F-150, and 2022 Expedition vehicles. The low-pressure fuel pump may fail, which can result in an engine stall while driving.
Risk and remedy
Risk
An engine stall increases the risk of a crash.
Remedy
Dealers will replace the low pressure fuel pump on super duty vehicles and update the powertrain control module (PCM) software on all other affected vehicles, free of charge. Owner notification letters were mailed July 27, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S75.
Ford Motor Company (Ford) is recalling certain 2018-2022 Transit Connect, 2019-2020 MKZ, MKX, Edge, Continental, F-150, Nautilus, Fusion, 2019-2023 Ranger, Mustang, 2020-2021 EcoSport, Expedition, Navigator, 2020-2022 Escape, F-250 SD, Corsair, 2020-2023 Aviator, Transit, 2020-2024 Explorer, 2021-2024 Bronco Sport, and 2022-2024 Maverick vehicles. A…
Risk and remedy
Risk
A rearview camera that displays a blank image can reduce the driver's view behind the vehicle. A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver. Both of these situations can increase the risk of a crash.
Remedy
Dealers will update the rearview camera software, free of charge. Owner notification letters were mailed September 4, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S72.
Ford Motor Company (Ford) is recalling certain 2021 Expedition, 2021-2022 Super Duty F-250, F-350, F-450, F-550, F-600, and 2020-2022 Lincoln Corsair vehicles. The rearview camera may display a blank or distorted image.
Risk and remedy
Risk
Rearview camera failure can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.
Remedy
Dealers will replace the rearview camera as necessary, free of charge. Owner notification letters were mailed September 18, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S05.
Ford Motor Company (Ford) is recalling certain 2020-2022 F-Super Duty F250, F350, F450, F550, F600, and 2021-2022 F-650, F750 vehicles. Biodiesel deposits may form on the pump drivetrain roller components, which could lead to failure of the high pressure fuel pump.
Risk and remedy
Risk
High pressure fuel pump failure can cause a loss of drive power, increasing the risk of a crash.
Remedy
Dealers will update the powertrain control module (PCM) and Transmission Control Module (TCM) software, free of charge. Owner notification letters were mailed January 23, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 24S78.
Ford Motor Company (Ford) is recalling certain 2018-2023 Expedition and Lincoln Navigator vehicles equipped with third-row seating; and 2019-2023 F-Super Duty F-250, F-350, F-450, and F-550 SuperCab vehicles. The owner's manual does not include instructions for adjusting or removing certain head restraints. As such, these vehicles fail to comply with the…
Risk and remedy
Risk
Without instructions, the head restraints may be improperly adjusted, increasing the risk of injury in the event of a crash.
Remedy
Ford will mail the Owner's Manual addendums that describe how to adjust and remove the head restraints for the center seating positions, free of charge. Owner notification letters were mailed July 21, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23C20.
Ford Motor Company (Ford) is recalling certain 2020-2021 F-150, Expedition, 2020-2022 Super Duty F-250, F-350, F-450, F-550, and 2020-2021 Lincoln Navigator vehicles. The windshield wiper arms may break, causing the windshield wipers to fail.
Risk and remedy
Risk
Inoperative windshield wipers can reduce visibility in certain driving conditions, increasing the risk of a crash.
Remedy
Dealers will replace both front windshield wiper arms, free of charge. Interim owner notification letters, informing owners of the safety risk, were mailed on May 24, 2022. Remedy parts are expected to be available 3rd Quarter 2022. Owner notification letters were mailed on October 21, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S26.
Ford Motor Company (Ford) is recalling certain 2017-2022 F-250 and F-350 Super Duty vehicles equipped with gasoline engines and aluminum driveshafts. Underbody heat and noise insulators may loosen and contact the aluminum driveshaft, which could damage the driveshaft and cause it to fracture.
Risk and remedy
Risk
A fractured driveshaft can cause a loss of drive power, or a loss of vehicle control if the driveshaft contacts the ground. Additionally, unintended movement could occur while parked if the parking brake is not engaged. Any of these scenarios can increase the risk of a crash.
Remedy
Dealers will inspect and repair the driveshaft as necessary, and properly attach the underbody insulators, free of charge. Owner notification letters were mailed on April 7, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S09.
Ford Motor Company (Ford) is recalling certain 2021 Super Duty F-250, F-350, F-450, F-550, F-600, and Medium Duty F-650 and F-750 vehicles equipped with 6.7L diesel engines. A small void may be present in the top-center of the vehicle's underhood secondary fuel filter cap, which may progress to a pinhole over time, allowing fuel to leak from the top of the…
Risk and remedy
Risk
A fuel leak in the presence of an ignition source can increase the risk of a fire or injury.
Remedy
Dealers will replace the primary and secondary fuel filters, free of charge. Owner notification letters were mailed January 28, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S01.
Ford Motor Company (Ford) is recalling certain 2021 F-150 and 2020-2021 F-250, F-350, F-450, and F-550 Super Duty vehicles. During manufacturing, the windshield may not have been properly bonded to the vehicle, allowing it to detach in a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS)…
Risk and remedy
Risk
In the event of a crash, if the windshield separates from the vehicle, it can increase the risk of injury.
Remedy
Ford will notify owners, and dealers will remove and reinstall the windshield, free of charge. The recall began April 16, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21C06.
Icon Vehicle Dynamics, LLC (Icon) is recalling all 05-UP FSD 2.5 Centerline Stabilizer Kits with part number 65050. The kits were sold as an accessory for certain 2005-2021 Ford F-250 4X4 and F-350 4X4 pickup trucks. The foam ring inside the stabilizer "through shaft" may block the piston ports, possibly causing the steering to lock up.
Risk and remedy
Risk
If the steering locks, it can increase the risk of a crash.
Remedy
Icon will notify owners, and dealers will install a new shock assembly with a revised foam ring and steel support disc, free of charge. The recall began December 21, 2020. Owners may contact Icon customer service at 1-951-689-4266.
Owner complaints
167 complaints3 involved a crash
What owners report most
Latest complaints
- Fuel system, gasoline
The contact owns a 2021 Ford F-250 SD. The contact stated that while idling and while driving, the engine was running rough and the engine power was reduced. The contact associated the failure with NHTSA Campaign Number: 25V455000 (Fuel System, Gasoline); however, the part to do the recall repair…
The contact owns a 2021 Ford F-250 SD. The contact stated that while idling and while driving, the engine was running rough and the engine power was reduced. The contact associated the failure with NHTSA Campaign Number: 25V455000 (Fuel System, Gasoline); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The failure mileage was approximately 77,000.
- Fuel system, gasoline
The contact owns a 2021 Ford F-250 SD. The contact stated that while driving at an undisclosed speed, the vehicle unexpectedly hesitated. The contact received notification of NHTSA Campaign Number: 25V455000 (Fuel System, Gasoline); however, the part to do the recall repair was not yet available.…
The contact owns a 2021 Ford F-250 SD. The contact stated that while driving at an undisclosed speed, the vehicle unexpectedly hesitated. The contact received notification of NHTSA Campaign Number: 25V455000 (Fuel System, Gasoline); however, the part to do the recall repair was not yet available. The dealer was contacted. The vehicle was not diagnosed or repaired. The dealer confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The approximate failure mileage was 35,000.
- Fuel/propulsion system
My 2021 Ford F250 super duty pickup truck experienced a catastrophic failure of the Bosch CP4 high pressure fuel pump. This has been confirmed by the dealer's service center. As a result of this part failure, metal shards were introduced into the entire fuel system. This now requires the fuel pump…
My 2021 Ford F250 super duty pickup truck experienced a catastrophic failure of the Bosch CP4 high pressure fuel pump. This has been confirmed by the dealer's service center. As a result of this part failure, metal shards were introduced into the entire fuel system. This now requires the fuel pump and the entire fuel system (every component) to be replaced. My truck has 74,9xx miles. This is a known and well publicized issue. Rather than recall the high pressure fuel pump, Ford instead issued a recall (24S78) to reflash the PCM software with the intent to reduce the risk of the fuel pump failure. I had the 24S78 recall work completed, and my fuel pump failed still. No indication in advance of this failure.
- Power train
Purchased a 2021 F250 brand new from dealership and have had serviced at dealer since new. This truck is equipt with the 10r140 transmission that is a known problem. Starting at 48K miles transmission slipped from 3-5 gear. Report to Mooresville Ford and they “drove” the truck 6 miles and stated…
Purchased a 2021 F250 brand new from dealership and have had serviced at dealer since new. This truck is equipt with the 10r140 transmission that is a known problem. Starting at 48K miles transmission slipped from 3-5 gear. Report to Mooresville Ford and they “drove” the truck 6 miles and stated they could not recreate the slip. Reported again to Mooresville Ford at ~78k, technician drove vehicle for 12 miles and documented a slight slip between 3-5 but Ford declined to take action and extended warranty to 100k. Reported again at ~96k to Mooresville Ford, dealership held truck for 8 days and drove 6 miles. Declined again to take action and extended warranty to 146k. Reported again to Mooresville Ford at 143k to which they declined action and stated: “without the engine throwing a code they would not cover the truck under warranty.” Had recall 24S78 POWERTRAIN CONTROL MODULE AND TRANSMISSION CONTROL MODULE REPROGRAMMING completed May of 2026 with ~155k. One month after this recall had been completed, a hard down shift from 8-7 and 5-3 started to occur. Reported to Mooresville Ford and they declined to take action and stated Ford would not cover. Down shifting is sudden and harsh and will cause harm to others of truck locks up on road. Someone needs to hold Ford accountable for these bad transmissions. Quote to replace came in at 10k which I am holding out hope a recall comes before I am forced to replace. PLEASE HELP! All service records are on file and can be provided to confirm claims.
- Power train
Transmission, temporally could be available but to replace it there is a $1500 core charge The transmission catastrophically failed, which lead to the rear wheels to lock up while driving, putting me and others at risk, had i been going faster when it did lock up No the problem has not been…
Transmission, temporally could be available but to replace it there is a $1500 core charge The transmission catastrophically failed, which lead to the rear wheels to lock up while driving, putting me and others at risk, had i been going faster when it did lock up No the problem has not been reproduced by a independent service center as i am going to replace the transmission myself I have inspected it along with a mechanic via photos showing all the metal fragments in the fluid and filter No warning lamps prior to the failure, but there where warning lights of service vehicle soon before the transmission locked up. Ever since new the transmission has shifted erratically especially from 3-4 and 6-7. Ford told me this was normal when I brough it in back when it only had a 20 or 30k miles on it for the erratic shifting. I now have 76K miles.
- Structure › Body
Cab trim is coming off vehicle, causing likelihood of vehicle getting water inside the body/ structure of the vehicle, which can lead to degradation and loss of structural integrity during a collision.
- Steering
While driving the vehicle, the steering column released all of the bearings, allowing for the steering column to move up and down and in and out freely, making it unknown if the steering would follow which way the steering wheel was turned. I reached out to our personal mechanic in regards to this…
While driving the vehicle, the steering column released all of the bearings, allowing for the steering column to move up and down and in and out freely, making it unknown if the steering would follow which way the steering wheel was turned. I reached out to our personal mechanic in regards to this, and had to pay out of pocket. Originally, I thought it was a failed part, but after research, it was brought to my attention of recall 25S94, which my truck did not qualify for. I replace the part at my expense, even though, at this time, the vehicle was only 3 years old. No failure signs appeared.
- Fuel system, diesel
The contact owns a 2021 Ford F-250. The contact stated that while driving 55 MPH, the engine warning light illuminated and the message "LIMP Mode in 34 Miles" was displayed. The dealer was contacted. The vehicle was diagnosed with a diesel emission fuel injector failure. The contact associated the…
The contact owns a 2021 Ford F-250. The contact stated that while driving 55 MPH, the engine warning light illuminated and the message "LIMP Mode in 34 Miles" was displayed. The dealer was contacted. The vehicle was diagnosed with a diesel emission fuel injector failure. The contact associated the failure with NHTSA Campaign Number: 24V957000 (Fuel System, Diesel); however, the VIN was not included. The vehicle was being repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 56,000.
- Power train
This is a follow-up to my original complaint #XXX, filed XXX, regarding the failure of the 10R140 10-speed automatic transmission in my 2021 Ford F-250 Super Duty (VIN: [XXX]). The transmission began exhibiting symptoms of gear slipping, jerking, delayed and harsh shifting, and pinging from the…
This is a follow-up to my original complaint #XXX, filed XXX, regarding the failure of the 10R140 10-speed automatic transmission in my 2021 Ford F-250 Super Duty (VIN: [XXX]). The transmission began exhibiting symptoms of gear slipping, jerking, delayed and harsh shifting, and pinging from the torque converter around 100,000 miles. These symptoms progressively worsened until the transmission suffered a catastrophic internal failure. As documented in the attached Sid Dillon Ford repair order, an authorized Ford dealer found metal contamination in the transmission fluid and confirmed that a complete transmission replacement was required. The attached Friesen Ford repair order also shows that harsh engagements were present and that a transmission flush failed to resolve the issue. I have also attached a sworn statement from [XXX], an independent automotive technician who has serviced vehicles for my family for several years. In his sworn statement, he confirms that these 10R140 transmissions have known serious ongoing issues and that many mechanics avoid working on them due to these problems. Ford Motor Company was provided with the above repair records and the sworn statement but has denied any responsibility or reimbursement for the transmission failure. The failure created a serious safety risk due to the sudden loss of propulsion while driving. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Fuel system, gasoline
The contact owns a 2021 Ford F-250. The contact received notification of NHTSA Campaign Number: 25V455000 (Fuel System, Gasoline); however, the part to do the recall repair was not yet available.The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. Neither the manufacturer nor the dealer was made aware of the issue. The contact had not experienced a failure.
- Electrical system · Engine · Fuel/propulsion system
I took a functional vehicle to Swant Graber Ford in Barron, WI in on [XXX] for Recall 24S78 and since then I have had numerous vehicle issues involving the PCM that they flashed. I have up to 16 different codes when the check engine light comes on including numerous communication U-codes indicating…
I took a functional vehicle to Swant Graber Ford in Barron, WI in on [XXX] for Recall 24S78 and since then I have had numerous vehicle issues involving the PCM that they flashed. I have up to 16 different codes when the check engine light comes on including numerous communication U-codes indicating faulty software download causing no run/no start problems along with severe safety concerns while driving. I returned the vehicle to Swant Graber today July 1, 2026 after 2 weeks being this was their earliest appointment availability. They then deleted the codes and told me to drive it until there is more issues which is a severe safety concern considering the condition of the PCM of this vehicle they returned to now which is unfunctional and not road worthy INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Visibility
The contact owns a 2021 Ford F-250. The contact stated that upon routine State Inspection at the local authorized dealer, the horn and the air bags failed to operate as intended. Upon further inspection, corrosion was found on the body control module from water leaking into the unit. The contact…
The contact owns a 2021 Ford F-250. The contact stated that upon routine State Inspection at the local authorized dealer, the horn and the air bags failed to operate as intended. Upon further inspection, corrosion was found on the body control module from water leaking into the unit. The contact stated that the front passenger’s side windshield was loose, and pressure was applied, possibly causing the water to leak into the unit. The vehicle was not repaired because the VIN was not included in NHTSA Campaign Number: 21V090000 (Visibility). The manufacturer was made aware of the failure. The failure mileage was approximately 75,000.
- Engine and engine cooling
See attached document for complaint.
- Fuel system, diesel
The contact owns a 2021 Ford F-150. The contact stated while driving at 60 MPH, the accelerator pedal was depressed, however the vehicle failed to accelerate as intended. The contact stated that several unknown warning lights illuminated and the engine seized. The contact stated while attempting to…
The contact owns a 2021 Ford F-150. The contact stated while driving at 60 MPH, the accelerator pedal was depressed, however the vehicle failed to accelerate as intended. The contact stated that several unknown warning lights illuminated and the engine seized. The contact stated while attempting to start the vehicle, the vehicle failed to start. The vehicle was towed to the residence. The independent mechanic diagnosed the vehicle with metal shavings on the fuel injectors. The contact was informed that the fuel system and fuel injectors needed to be replaced. The vehicle was not repaired. The contact was informed of the recall, NHTSA Campaign Number: 24V957000 (Fuel System, Diesel). The vehicle was towed to the dealer where it was diagnosed with a failed high pressure fuel pump. The contact was informed that the high pressure fuel pump needed to be replaced. The vehicle was not repaired. The contact was informed of a gasoline odor in the fuel system. The contact was informed that the repair was not covered under the recall. The manufacturer was made aware of the failure and a case was filed. The contact was advised to take the vehicle to the dealer for diagnostic testing. The manufacturer was informed that the dealer denied the repair. The failure mileage was approximately 124,000.
- Fuel system, diesel
The contact owns a 2021 Ford F-250. The contact received notification of NHTSA Campaign Number: 24V957000 (Fuel System, Diesel); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair.…
The contact owns a 2021 Ford F-250. The contact received notification of NHTSA Campaign Number: 24V957000 (Fuel System, Diesel); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated that the check engine warning light remained illuminated. The vehicle was taken to the dealer where a fuel injector was replaced; however, the failure persisted. The vehicle experienced reduced engine power, decelerated and was towed back to the dealer. The vehicle was diagnosed with a failure of the CP4 high-pressure fuel injection pump. The vehicle was not repaired. The approximate failure mileage was 115,000.
- Back over prevention › Warnings
Back up camera will show a black screen about 1-2 times a month. Have to turn the truck off and restart to get the camera to work again
- Unknown or other
Back window has dropped 1/4 to 1/2 inch to the right. and is not in alignment. Safety concern that window could fall out or pop out during accident. No reason for window to just drop. Believe not installed correctly or sealants have failed cause of defect and window to drop and separate molding down to become detached right side. See pictures attached.
- Fuel/propulsion system
The secondary fuel filter is leaking and Ford has told me my vehicle was manufactured 1 month too early and doesn’t qualify for a previous recall…They know about the secondary fuel filter housing cracking and being an issue!
- Fuel system, diesel
The contact owns a 2021 Ford F-250. The contact stated that while the vehicle was at the local dealer, it was determined that the heat shield was rubbing on the drive shaft. There was damage to the drive shaft. The dealer informed the contact about NHTSA Campaign Number: 16V778000 (Fuel System…
The contact owns a 2021 Ford F-250. The contact stated that while the vehicle was at the local dealer, it was determined that the heat shield was rubbing on the drive shaft. There was damage to the drive shaft. The dealer informed the contact about NHTSA Campaign Number: 16V778000 (Fuel System, Diesel). No warning lights were illuminated. The vehicle was not repaired. The manufacturer was contacted, but no assistance was provided. The manufacturer suggested that the receipts be kept as records for possible recalls. The failure mileage was approximately 37,000.
- Power train
Transmission has shifting issues. Sometimes is don't down shift below 4th gear and when in an intersection truck barley moves then it shifts hard and can move . It also is constantly shifting between gears. It will shift form 10th to 5yh while driving.
- Fuel system, diesel
The contact called on behalf of the owner of a 2021 Ford F-250. The owner received notification of NHTSA Campaign Number: 24V957000 (Fuel System, Diesel); however, the part to do the recall repair was not yet available. The contact stated that while driving at 45 MPH, the vehicle stalled. The…
The contact called on behalf of the owner of a 2021 Ford F-250. The owner received notification of NHTSA Campaign Number: 24V957000 (Fuel System, Diesel); however, the part to do the recall repair was not yet available. The contact stated that while driving at 45 MPH, the vehicle stalled. The vehicle was pulled over to the side of the road. The vehicle failed to restart and was towed to Grumpy's Diesel Service. The mechanic sent a fuel sample to a testing company, and it was confirmed that there was no water contamination. The mechanic diagnosed that the high-pressure fuel pump had exploded. The mechanic replaced the high-pressure fuel pump and fuel rails, and a decontamination kit was installed. The vehicle was repaired at the contact's expense. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The local dealer and the manufacturer were not contacted. The failure mileage was approximately 120,000.
- Engine
2021 f250 with the 7.3v8. 120000 miles and lifter has failed. We believe that we caught it early enough to where we have no more issues other than this. After reading up I have noticed where there has been several other customers with same issue on this engine. I run several f350 pickups with our…
2021 f250 with the 7.3v8. 120000 miles and lifter has failed. We believe that we caught it early enough to where we have no more issues other than this. After reading up I have noticed where there has been several other customers with same issue on this engine. I run several f350 pickups with our business and have been very pleased and bought this pickup to run around in and keep from driving the work trucks. I would like to think that this should not be an issue with this amount of miles. I hope ford steps up and fixes this issue
- Fuel/propulsion system · Power train · Unknown or other
This vehicle is subject to two open safety recalls for which no repair remedy is currently available from the manufacturer: 1. Recall 24V957 (24S78) Dec 20, 2024 involves the high-pressure fuel pump and powertrain control system. The recall states the fuel pump may fail and cause extended…
This vehicle is subject to two open safety recalls for which no repair remedy is currently available from the manufacturer: 1. Recall 24V957 (24S78) Dec 20, 2024 involves the high-pressure fuel pump and powertrain control system. The recall states the fuel pump may fail and cause extended cranking/no start or loss of motive power while driving. Loss of motive power while in traffic or while towing increases the risk of a crash. The manufacturer has stated that parts and/or software are not available to repair this defect. The vehicle is regularly used for towing a recreational trailer, which increases the safety risk if loss of power occurs during operation, especially at highway speeds or while merging. 2. Recall 25V686 (25SA8) Oct 10, 2025 involves the 360-degree/rear-view camera system. The recall states that the rear camera image may become dark in certain reversing situations when front and side cameras are exposed to significantly more light than the rear camera. Reduced visibility while reversing increases crash risk, particularly when maneuvering a large pickup truck. The manufacturer has acknowledged both recalls but has not provided a repair remedy within a reasonable timeframe. The powertrain-related recall has remained unresolved for an extended period. The vehicle has not been repaired because the manufacturer states parts/software are unavailable. At this time, the defect conditions have not resulted in a confirmed failure event, but the vehicle continues to be operated with open safety recalls that cannot be remedied. The safety risk remains present due to lack of available repair. Due to the prolonged unavailability of a repair remedy for a recall involving potential loss of motive power, I am unable to safely use the vehicle for its intended purpose of towing, as doing so would increase the risk of a crash if the defect occurs.
- Fuel system, gasoline
The contact owns a 2021 Ford F-250. The contact received notification of NHTSA Campaign Number: 25V455000 (Fuel System, Gasoline); however, the part to do the recall repair was unavailable. The manufacturer was not contacted. The contact had not experienced a failure.
- Unknown or other
I was driving on I-77 WV Turnpike when suddenly my moon roof shattered. No other vehicles were around and no overpasses in sight. When I pulled over, the glass was raised as if the blowout came from inside the vehicle. It sounded like a gunshot went off inside my truck. Vehicle has been repaired. Replacement glass was $1,800.00
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Sogefi Secondary Diesel Fuel Filter Leak
The Office of Defect Investigations (ODI) has received 27 complaints alleging diesel fuel leaks due to a fracture in the secondary fuel filter housing in model year (MY) 2015-2021 Ford Motor Company (Ford) F-250, 350, 450, and 550 Super Duty vehicles equipped with 6.7L diesel engines. Of these complaints, 12 describe…
The Office of Defect Investigations (ODI) has received 27 complaints alleging diesel fuel leaks due to a fracture in the secondary fuel filter housing in model year (MY) 2015-2021 Ford Motor Company (Ford) F-250, 350, 450, and 550 Super Duty vehicles equipped with 6.7L diesel engines. Of these complaints, 12 describe an engine compartment fire. The proximity of the secondary fuel filter to high heat sources creates a potential for autoignition thermal events and fires. ODI has contacted the vehicle manufacturer, Ford, and the filter manufacturer, Allevard Sogefi USA (Sogefi), and learned that the low-pressure fuel system is capable of a maximum operating pressure of 8.5 Bar, while the secondary fuel filter is only tested to seven (7) Bar during the manufacturing process. Additionally, changes starting in 2022 by both Ford and Sogefi align with a lack of similar complaints on MY 2022 and newer vehicles. ODI is opening this Preliminary Evaluation (PE) to evaluate the severity of the potential problem and to fully assess the potential safety-related problems. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11011941Some 2017-2025 F-Super Duty vehicles may exhibit a pull/drift condition during braking.
- 11011936Some 2020-2021 F-Super Duty vehicles which have received a seat control module-G (SCMG) and/or seat control module-H (SCMH) software update using the Ford Diagnosis and Repair System (FDRS) scan tool may set DTCs U024B and/or U024C in the auxiliary protocol interface module (APIM).
- 11011019In affected vehicles, the Variable Displacement Oil Pump (VDOP) delivers oil to the engine at low pressure/capacity during idle conditions. Routine occurrences of prolonged idle time may result in excess wear to the engine camshaft lobes and valve tappet surfaces due to reduced lubrication. Over time, the engine may progressively run rough due to cylinder misfire. Additionally, customers may hear engine tapping noises and the Check Engine Light (CEL) may illuminate.
- 11008948While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions. While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions.
- 11008373In affected vehicles, the Variable Displacement Oil Pump (VDOP) delivers oil to the engine at low pressure/capacity during idle conditions. Reason for supplement: software now available/additonal technician information
- 11007943018-2024 F-150/F-Super Duty - Tailgate Step Binds/Will Not Open Or Opens/Pops Up While Driving
- 11006862Some 2019-2024 Ford and Lincoln vehicles equipped with a telematics control unit module (TCU) may exhibit the Location toggle button in the Connectivity setting menu grayed out with an inability to switch it off.
- 11006767This article supersedes TSB 22-2087 to update the Part List. Some 2020-2022 F-Super Duty vehicles equipped with a 10R140 automatic transmission may exhibit harsh reverse to drive engagements without diagnostic trouble codes (DTCs). This may be due to sticking valves in the main control valve body or suspect input shaft seals (F9) and the output shaft seals (F10). To correct the condition, follow the Service Procedure steps to perform the transmission accelerated main control break-in routine for the E and F clutches and if necessary, replace the input shaft seals (F9) and the output shaft seals (F10).
- 11006036Certain 2018 - 2024 Model Year Various Vehicles Update SYNC Software In all the affected vehicles, due to an error in the SYNC software, you may experience SYNC system instability concerns and/or a failure to preserve certain settings across ignition cycles. This may result in a black infotainment screen that does not affect rear view camera, incorrect language setting, erased or unsaved radio presets, and potential inability to perform software updates.
- 11006033Certain 2020-2024 Super Duty and 2021-2025 Model Year Econoline Equipped With a 6.8L or 7.3L Gasoline Engine Powertrain Control Module (PCM) Software Update REASON FOR THIS SUPPLEMENT Software Availability Update: Software is now available to repair 2021-2022 and 2025 Model Year Econoline vehicles. The service action has been updated accordingly. Technical Information: IDS programing information has been added for 2021-2023 Model Year Econoline Vehicles.
- 11005994Some 2020-2022 F-Super Duty pickup vehicles equipped with a 6.7L engine, 175 inch wheelbase, and built on or before 23-Sep-2021 may exhibit a thump/whine/knock noise from the midship fuel tank at idle or during key on, engine off (KOEO) after performing TSB 21-2057. The noise may be more pronounced at fuel levels at or below 1/4 tank. This may be due to the fuel pump
- 11005746Some 2019-2024 Ford and Lincoln vehicles equipped with SYNC3 may experience various FordPass/LincolnWay connectivity concerns including but not limited to: missing activation prompt (pop-up) on the vehicle's center display screen when attempting to activate vehicle through FordPass/LincolnWay, incorrect location/global positioning system (GPS) reported through FordPass/LincolnWay, problems with remote commands being performed through FordPass/LincolnWay, incorrect data/information reported on FordPass/LincolnWay. These symptoms will be accompanied by diagnostic trouble code (DTC) B156D:89 in the TCU. This may be due the accessory protocol interface module (APIM) software
- 11005710Some 2019-2024 vehicles equipped with SYNC 3 may experience a programming Error - "INSTL_ERR12" while programming APIM using the Ford Diagnosis and Repair System (FDRS) or experience a frozen screen which says "updating system software" or no progress/response from module using the universal USB updater. This may be due to low memory in the APIM commonly occurring on software level NU5T-14G381-AB/BB. The current software level can be verified in the SYNC tab of Professional Technician System (PTS) or using the vehicle's center display screen, Settings > General > About. To correct the condition, run the universal USB updater. If unsuccessful, using the latest software version of the FDRS scan tool, run the service function "APIM - Reset the Accessory Protocol Interface Module Application" and select "Clear All User Data" option. The center display screen will reboot. As soon as the vehicle's center display screen displays the boot up logo, immediately reinsert the same universal serial bus (USB) drive that was utilized during the prior failed programming attempt.
- 11003146Some 2019-2024 vehicles equipped with SYNC 3 may experience a programming Error - "INSTL_ERR12" while programming APIM using the Ford Diagnosis and Repair System, or experience a frozen screen which says "updating system software" or no progress/response from module using the universal USB updater. This may be due to low memory in the APIM commonly occurring on software level
- 11002845Certain 2020-2024 Super Duty and 2021-2025 Model Year Econoline Equipped With a 6.8L or 7.3L Gasoline Engine Powertrain Control Module (PCM) Software Update In affected vehicles, the Variable Displacement Oil Pump (VDOP) delivers oil to the engine at low pressure/capacity during idle conditions. Routine occurrences of prolonged idle time may result in excess wear to the engine camshaft lobes and valve tappet surfaces due to reduced lubrication. Over time, the engine may progressively run rough due to cylinder misfire. Additionally, customers may hear engine tapping noises and the Check Engine Light (CEL) may illuminate
- 11001646This article supersedes TSB 23-2307 to update the Service Procedure and vehicle model years affected. Some 2019-2020 Edge/F-150/Fusion/Continental/MKZ/Nautilus, 2019-2021 Transit Connect, 2019-2023 Mustang, 2019-2023 Ranger, 2020-2021 Expedition/Navigator, 2020-2022 Escape/Corsair/Super Duty/EcoSport, 2020-2024 Explorer/Aviator/Transit, 2021-2024 Bronco Sport, 2022-2024 Maverick vehicles with SYNC 3 may experience various SYNC performance related concerns. This may be due to the SYNC Software. To correct the condition, follow the Service Procedure to update theaccesory protocol interface module (APIM) software.
- 11001368When replacing the E clutch hub (7P211) on 2020-2024 F-Super Duty and 2024-2025 F-650/F-750 vehicles equipped with a 10R140 transmission, a new washer (7482) has been added and must be installed with the new updated E clutch hub. Refer to the Workshop Manual (WSM), Section 307-01B for proper installation of the washer. Refer to the parts catalog for the appropriate part numbers for the E clutch hub and the washer.
- 11000738Some 2020-2022 F-Super Duty vehicles built on or before 31-Oct-2022 and equipped with a 6.7L engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P2201, P2209, P220E and/or P24FE stored in the powertrain control module (PCM). This may be due to the software in the PCM and the nitrogen oxides (NOx) sensor 11. To correct the condition, follow the Service Procedure to replace the NOx sensor 11 and reprogram the PCM and transmission control module (TCM).
- 11000297Various vehicles equiped with 10R80/10R80 MHT/10R100/10R140 transmissions may require replacement of the seal kits (7153) when internal repairs are being performed. These kits come with 4 wheel drive (4WD) seals and will no longer include the 2WD seals. When working on a 2WD vehicle, any 2WD seals must be ordered separately. Refer to the parts catalog for the proper 2WD seals required.
- 10254138All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
- 10253552Various vehicles have had pinpoint tests, guided routines and the Warranty and Policy Manual recentlyupdated for diagnostics and repairs on SYNC generation 3 and later applications. When performingdiagnostics and repairs on SYNC Gen 3 or later, select the diagnostics tab and search for related symptoms,DTCs and keywords. The search results will be shown in the search results pane. Read and follow allTechnical Service Bulletins (TSB), Special Service Message (SSM)s or General Service Bulletin (GSB) first if abulletin specifically addresses the vehicle concern. If there are no messages, run the appropriate diagnosticpinpoint test found in the Workshop Manual (WSM). Follow the steps in the pinpoint test. Make sure to note thetitle of the guided routine, using the correct one for the vehicle's symptom or diagnostic trouble code (DTC) iscritical. Depending on the outcome of the pinpoint test, a repair validation code (RVC) may be generated eitherin the pinpoint test or Guided Routine. If the vehicle concern still exists after following the pinpoint tests orguided routine, then a manual RVC can be generated using the RVC Assist Form. A manual RVC can only begenerated once the above process has been followed.
- 10251952For 2015-2024 Ford and Lincoln vehicles equipped with turbocharged engines and customer concern of an engine oil leak, refer to Workshop Manual (WSM), Section 303-00 for oil leak inspection and testing methods. Ford has evaluated turbochargers replaced for oil leak symptoms and although oil may collect on the external surface of a turbocharger, it is extremely rare for a turbocharger assembly to be the root cause of the oil leak. Careful inspection of the turbocharger oil feed and drain tubes should be performed along with the recommended WSM procedures as needed. Warranty claims for turbocharger replacement going forward will be assessed.
- 10251934During service and repair requiring removal and replacement of a crankshaft bolt and/or crankshaft damper, achieving proper torque of the crankshaft pulley bolt is critical. Incorrect torque may allow the bolt to loosen resulting in the timing gear breaking and engine damage. Replacement of the bolt is critical to the repair and accurately following the installation procedure in the Workshop Manual (WSM) Section, 303-01 is extremely important. The bolt torque procedure can be found in the crankshaft front seal removal and installation procedure or in the engine assembly procedure.
- 10250852Some 2020-2023 Ford and Lincoln SYNC3 equipped vehicles may experience an inaccurate notification in the FordPass/LincolnWay app indicating Vehicle Has Entered Deep Sleep Mode. Vehicle Has Entered Deep Sleep Mode message is expected if the vehicle has not been started for 14 consecutive days, battery voltage is at/below 9.5 volts or the body control module (BCM) 12 volt battery state of charge (SoC) drops below 50%. If the vehicle is going into deep sleep due to one of these conditions, follow normal Workshop Manual (WSM) Section 414-01 procedure to correct the concern. If the vehicle is going into deep sleep outside these conditions, this may be due to the telematics control unit (TCU) software. To correct this condition, follow the Service Procedure to update the TCU to the latest software. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
- 102491752024 F-Super Duty vehicles are equipped with XL-22 (WSS-M2C184-A1) high temperature power steering fluid that looks like clear hydraulic fluid. This fluid is an improvement in high temperature and thermal oxidative stability compared to Mercon LV. This power steering fluid is also compatible and highly recommended to use when filling or topping off power steering systems of all 2012-2023 F-Super Duty vehicles originally equipped with Mercon LV.
- 10245672Some 2020-2022 F-Super Duty vehicles equipped with a 6.7L engine may require a long block replacement of the engine for various reasons. The replacement long block may be equipped with an updated upper oil pan. If the oil filter adapter from the original engine does not mate with the new upper oil pan, service parts PC3Z-6881-A (oil filter adapter), W503277-S439 (package of 6 bolts, 4 bolts required), W718564-S450 (stud), W520101-S442 (nut), and PC3Z-14A206-A (starter cable retaining bracket) will be needed to complete the repair.
- 10244822When replacing the transmission case on a 2020-2022 F-Super Duty equipped with a 10R140 transmission, the new service case may not come equipped with the transmission fluid leveling plug. To achieve proper transmission fluid level, a new transmission fluid pan and gasket must be installed (service part PC3Z-7A194-A). Refer to the 2023 F-Super Duty Workshop Manual, Section 307-01B to properly set the transmission fluid level when using the newer transmission fluid pan.
- 10244707Some 2019-2020 Edge/F-150/Fusion/Continental/MKZ/Nautilus, 2019-2021 Mustang/Ranger/Transit Connect, 2020-2021 EcoSport/Escape/Expedition/Explorer/F-Super Duty/Aviator/Corsair/Navigator, 2021 Bronco Sport and 2020-2022 Explorer/Aviator vehicles with SYNC 3 may experience various SYNC performance related concerns. This may be due to the SYNC Software. To correct the condition, follow the Service Procedure to update the SYNC module (APIM) software.
- 10243609Some vehicles equipped with power folding mirrors may exhibit power folding mirrors that are inoperative or exhibit a clicking sound. This may be due to the mirrors being manually folded in, during transportation, going through a car wash, bumped in a parking lot, or found during pre-delivery inspection (PDI). Prior to the replacement of any components, attempt to synchronize the mirrors by following the Power Mirrors Synchronization procedure. Refer to Workshop Manual (WSM) Section 501-09 Rear View Mirrors - General Procedures - Power Mirrors Synchronization.
- 10241949Certain 2021-2022 Model Year Econoline, Super Duty Chassis Cab, F53 Motor Home, F59 Step Van, and F650/F750 Medium Duty Chassis Cab Vehicles Equipped with a Premium Rated 7.3L Engine - Engine Horsepower Credit
- 10241627In various 2017-2023 Ford and Lincoln vehicles, customers may receive a message in the FordPass or LincolnWay App stating Feature Unavailable. Since this is a fleet vehicle, it cannot access the (SYNC Connect) FordPass or LincolnWay app through the TCU Embedded Modem. If this message appears, the vehicle may be equipped with a fleet telematics module. Replacement of the TCU or TCU related repairs will not prevent this message from appearing. Refer the customer to in app FordPass Guides or LincolnWay Concierge Teams to aid with fleet telematics removal. Open app, select Account > Help > CHAT or CALL option.
- 10240743The Service Awareness Newsletter is an informal communication that contains information that may not be presently available in a TSB, SSM, GSB, or other electronic communication. This article includes information on warranty, technical service tips and other service information.
- 10240719Some F-Super Duty and F-150 vehicles equipped with trailer tow mirror may exhibit various exterior rear view mirror functional concerns that require replacement after diagnosis. To properly determine if the defect is warrantable, cleaning and close inspection of the affected mirror may be required. To aid in proper warranty determination, the Rear-View Mirror Analysis general service bulletin (GSB) has been updated with a detailed cleaning procedure that should be followed prior to any inspection. New labor operations (17682ZZ or 17682ZZT) have been created that covers the cleaning and inspection process and may be used even if condition of failure is non-warrantable. Ford has inspected numerous returned parts and determined many cases are caused by damage which is unwarrantable and may be subject to chargeback. Refer to the latest version of the GSB on OASIS.
- 10237977Some 2020-2023 Ford and Lincoln SYNC3 equipped vehicles may experience an inaccurate notification in the FordPass/LincolnWay app indicating Vehicle Has Entered Deep Sleep Mode. Vehicle Has Entered Deep Sleep Mode message is expected if the vehicle has not been started for 14 consecutive days, battery voltage is at/below 9.5 volts or the body control module (BCM) 12 volt battery state of charge (SoC) drops below 50%. If the vehicle is going into deep sleep outside these conditions, this may be due to the telematics control unit (TCU) software. To correct this condition, follow the Service Procedure to update the TCU to the latest software. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
- 10237971Some 2021-2023 F-Super Duty/E-Series vehicles equipped with a 6.2L, 6.8L or 7.3L gasoline engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0457 and/or P0455 stored in the powertrain control module (PCM). This may be due to a improper fuel filler cap installation and/or outside contamination on the fuel cap sealing surface. The fuel filler cap requires multiple turns to seal properly and should be clean of any debris on sealing surface. Advise the customer to turn the fuel filler cap clockwise until there is at least one audible click to seal properly. If the DTCs return after the fuel filler cap is cleared of debris and properly seated, refer to Workshop Manual (WSM), Section 303-13 > pinpoint test HX.
- 102377892011-2023 F-Super Duty and 2016-2024 F-650/F-750 vehicles equipped with a 6.7L engine may exhibit an elevated idle condition. During prolonged idle time, vehicles may experience this elevated idle to reduce unburned hydrocarbons from the SCR. The powertrain control module estimates hydrocarbon levels in the SCR and may increase idle speed to remove them. Idle speed will be increased to 1000 RPM for ambient temperatures near 26C (80F) and may increase to 1200 RPM at -40 C (-40F). Vehicles may exhibit exhaust smoke and diesel exhaust fluid smell during elevated idle condition. Exhaust smoke and smell condition will not affect reliability or durability of the engine. Power take-off (PTO) use and idle set point control will disable elevated speed. It is required that the operator monitor the vehicle and adhere to any Exhaust Filter warning messages.
- 10236685Some 2018-2021 F-150 vehicles equipped with a 3.0L diesel engine, 2016-2022 F-650/F-750 vehicles equipped with a 6.7L engine, and 2017-2022 F-Super Duty vehicles equipped with a 6.7L engine and built on or before 08-Mar-2022 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P21DD, P20BA. P20B9, P204C, P208A, P208B, P208C, P203B, P205B, P21CD and/or U02A2 in the powertrain control module (PCM). This may be due to water intrusion within connectors C3613 and/or C4851/C3610 on the reductant harness going to the reductant pump/heater assembly and the reductant level sensor/quality module. This may also be due to movement of the wiring harness causing terminal fretting. To correct the condition, follow the Service Procedure to replace the reductant tank harness, the reductant pump/heater assembly and/or the reductant tank, as well as securing the wiring harness using a cable zip tie fastener.
- 10236586Some 2021-2023 F-Super Duty vehicles equipped with a 10R140 transmission may exhibit harsh or delayed engagement/shift concerns. Most concerns may be addressed with the PCM/TCM Transmission Accelerated Main Control Break In Routine. Refer to Workshop Manual, Section 307-01, DTC Chart and/or Diagnosis By Symptom to identify the clutch(s) to be cycled. This routine cycles the shift solenoids and clutch control valves to remove contamination that may be sticking the valves and must be performed along with an adaptive learning drive cycle before attempting internal service. Although this routine was developed for low mileage vehicles, it has proven effective for resolving many shift and engagement symptoms across the life of the vehicle. For claiming, use causal part 7A100 and applicable labor operations in Section 7 of the Service Labor Time Standards Manual.
- 10236585Some 2020-2022 F-Super Duty vehicles equipped with a 6.7L engine may experience a lack of power due to snow packing of the engine air cleaner when operating in extremely snowy conditions. This may also be due to ice forming in the air intake while operating in temperatures below -22F (-30C). Diagnostic trouble code (DTC) P1548 may be present in the powertrain control module (PCM). To supplement heavy snow environment pre-filter service kit (service part LC3Z-9K635-AA), a front grill cover (service part NC3Z-19A413-A) is now available for service but is not a warrantable item. It is recommended that the front grill cover be removed at temperatures greater than 10F (-12C) and reinstall in subsequent winter seasons in order to maintain optimal vehicle performance.
- 10235153For 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identification number (VIN) from a different vehicle. Most modules on these affected vehicles are VIN/vehicle specific and hardware variations between modules do exist. Swapping a module from a vehicle or ordering a module using a different vehicle/VIN can cause ineffective repairs and additional vehicle down time. Make sure all appropriate Workshop Manual (WSM) procedures are followed when diagnosing the condition prior to all module replacements and only order modules using the correct VIN.
Every Ford F-250 SD model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.