2010 Mazda MAZDA3
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mazda › MAZDA3 › 2010
These records cover every 2010 Mazda MAZDA3. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2010 Mazda MAZDA3. Newest first.
Mazda North American Operations (Mazda) is recalling certain 2011 Mazda2 and 2010-2011 Mazda3 and Mazdaspeed3 vehicles equipped with a manual seat lifter. In the affected vehicles, the seat height adjustment lifter links may break or detach from the seat frame and the seat angle may incline causing the driver to not be able to maintain an appropriate…
Risk and remedy
Risk
If the driver cannot maintain an appropriate driving position, there is an increased risk of a crash.
Remedy
Mazda will notify owners, and dealers will inspect the seat lifter links and install a reinforcement bracket to the lifter links, or replace the entire seat adjuster unit, free of charge. The recall began April 7, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 0917B.
Mazda North American Operations (Mazda) is recalling certain model year 2010-2013 Mazda3 and Mazdaspeed3 vehicles manufactured November 18, 2008, to June 8, 2013, 2012-2015 Mazda5 vehicles manufactured October 26, 2010, to June 22, 2015, 2016 CX-3 vehicles manufactured June 1, 2015, to December 26, 2015, and 2013-2016 CX-5 vehicles manufactured December 15…
Risk and remedy
Risk
If the lift gate falls unexpectedly, it may hit the user, increasing their risk of injury.
Remedy
Mazda dealers will replace the both lift gate supports, free of charge, however parts are not currently available. The recall began April 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9916H.
Mazda IS recalling 25,400 my 2010 mazda3 vehicles. a clearance between the engine harness and the housing of starter motor may be insufficient. due to this, the covering of the harness may be damaged through vibration during operation possibly causing a short-circuit between certain harness wires and the starter housing. a short-circuit can result in…
Risk and remedy
Risk
The main fuse may blow out causing the engine to stall and inability of restart, increasing the risk of a crash.
Remedy
Dealers will have the engine harness inspect and add a protector clip on the affected section of the harness. if necessary, the harness will be repaired. this service will be performed free of charge. the recall IS expected to begin on may 6, 2009. owners may contact mazda at 1-800-222-5500.
Owner complaints
686 complaints18 involved a crash5 involved a fire13 injuries
What owners report most
Latest complaints
- Electrical system
The AT light came on the dash, added transmission fluid because it was a little low but the light still has not gone off. I think there is an electrical problem within the transmission. It's had shifting issues since purchasing this vehicle. I also have a small child that comes with me to work and I do not want my car to catch on fire while we are in this vehicle.
- Tires
my girlfriend had bought a car from a dealership in Pennsylvania and the car is registered in Pennsylvania at a dealer called premier world wide auto sales. when she had bought the car all four of the tires i believe should have failed pa safety inspection and the owner of this shop keeps telling…
my girlfriend had bought a car from a dealership in Pennsylvania and the car is registered in Pennsylvania at a dealer called premier world wide auto sales. when she had bought the car all four of the tires i believe should have failed pa safety inspection and the owner of this shop keeps telling me that they pass one hundred percent even though the tires have signs of dry rot all the way around all four tires and would not stop giving me problems and trying to prove me wrong the dot codes show that the tires in the front were 10 years of age and the rear tires at 8 years of age and showing signs of dry rot the tire size all around is 205/55r16 and this is completely unacceptable for a business that has been operating for as long as its been operating because all i can think about is how many other cars has this dealership sold with dry rotting tires nor did they show my girlfriend when she bought the car any of the work that had been done by the shop that had done the inspection prior she was told that everything on this car was great and that there weren't any issues when infact that was not the case i found a leak coming from an engine oil pressure sensor and a cv axle boot torn and flinging grease along with the tires with none of this being disclosed to my girlfriend who bought the car shortly after
- Electrical system · Unknown or other
NHTSA Complaint Narrative I am filing this complaint regarding a 2010 Mazda 3, VIN [XXX] . The vehicle experiences intermittent transmission control failures, including difficulty shifting out of first gear and warning indicators triggered by vibration. The transmission and transmission control…
NHTSA Complaint Narrative I am filing this complaint regarding a 2010 Mazda 3, VIN [XXX] . The vehicle experiences intermittent transmission control failures, including difficulty shifting out of first gear and warning indicators triggered by vibration. The transmission and transmission control module have already been replaced. The dealership has identified the wiring harness as the cause of the remaining failure. Mazda North American Operations has confirmed that the required wiring harness (BBM9-67-020H) is discontinued and unavailable. However, Mazda has not provided a written determination of whether the known wiring harness recall (engine wiring harness chafing affecting control systems) applies to this VIN, nor confirmed recall completion history. Mazda has advised the customer to seek aftermarket or salvage parts, but has not provided an approved repair remedy or goodwill assistance despite the issue affecting drivability and safety. I am requesting that NHTSA review whether Mazda has met its obligations regarding: 1.recall applicability determination by VIN, and 2.providing an adequate remedy when OEM repair parts are no longer available for a safety-related defect. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Structure · Structure › Interior panels › Dashboard
See attached document for complaint.
- Unknown or other
I have reason to believe the dealership I bought my vehicle from rolled back my odometer. Upon checking my carfax information, 12/01/24, the odometer read 161,142, which the dealership did own my vehicle at this time. When I bought this car in April of 2025, the odometer was reading 130,000.
- Service brakes
On August 15, 2025, my 2010 Mazda 3 began displaying the ABS warning light intermittently while driving. The ABS system is a critical safety feature, and when the light comes on, I am unsure if the braking system will function properly in an emergency. I scanned the vehicle using a Foxwell…
On August 15, 2025, my 2010 Mazda 3 began displaying the ABS warning light intermittently while driving. The ABS system is a critical safety feature, and when the light comes on, I am unsure if the braking system will function properly in an emergency. I scanned the vehicle using a Foxwell diagnostic tool and retrieved the following ABS-related fault codes: C0020:1C-2B – ABS Pump Motor Control Circuit U0425:62-60 – Invalid Data Received from IPC/ABS Control Module U0140:00-28 – Lost Communication with Body Control Module These issues are consistent with Mazda Technical Service Bulletin 04-002/13 (July 17, 2013), which documents ABS pump motor failures caused by poor motor brush contact. This is a serious safety concern because the ABS system fails without warning, leaving the driver and passengers at risk of brake loss in critical conditions. Why this should be investigated: The defect occurs intermittently, making it difficult to predict or reproduce. It matches a known documented defect acknowledged by Mazda in TSB 04-002/13. Other owners have reported similar ABS pump failures in Mazda vehicles of this generation. The failure compromises safe braking and should be treated as a safety defect warranting investigation and possible recall. Action Requested: I am requesting that NHTSA investigate this recurring ABS pump/motor failure in 2010 Mazda 3 vehicles and determine whether a recall should be issued to address this known defect.
- Electrical system · Service brakes
The a.b.s pump module is defective in these vehicles. There are tons of people having issues with them. When they fail it happens suddenly resulting in brake failure, power steering failure, the car does not like to shut off, the vehicle will go into "limp mode" and every light on the dash comes…
The a.b.s pump module is defective in these vehicles. There are tons of people having issues with them. When they fail it happens suddenly resulting in brake failure, power steering failure, the car does not like to shut off, the vehicle will go into "limp mode" and every light on the dash comes on. The part itself is costing close to $1000 u.s.d . With all of tge effected things tgat go with it i believe it can be very dangerous and should be recalled
- Seats
This vehicle is subject to recall #: 17V-082 referring to a drivers seat lifter link than can break. My car has a broken lifter link, was brought to the dealership and instead of replacing the entire seat adjuster unit like the recall states, they simply installed a reinforcement bracket. When…
This vehicle is subject to recall #: 17V-082 referring to a drivers seat lifter link than can break. My car has a broken lifter link, was brought to the dealership and instead of replacing the entire seat adjuster unit like the recall states, they simply installed a reinforcement bracket. When brought back to Med Center Mazda they state it has already been repaired and therefore cannot be repaired again. The vehicle still has a broken seat lifter link.
- Unknown or other
Transmission slipping. Not shifting correctly.
- Tires › Pressure monitoring and regulating systems
I purchased two tires from Les Schwab in Molalla, OR on 1/15/25 in which upon them changing the tires they damaged one of my TPMS sensors and they did not replace it. I didn't have a warning light before I went in and now I do and they knowingly did not replace it when TPMS sensor service was part…
I purchased two tires from Les Schwab in Molalla, OR on 1/15/25 in which upon them changing the tires they damaged one of my TPMS sensors and they did not replace it. I didn't have a warning light before I went in and now I do and they knowingly did not replace it when TPMS sensor service was part of purchasing the new tires. Instead they quoted me $451.96 to replace the sensors in all 4 tires other than replaced the one they broke. A set of TPMS sensors online cost $28, this is unethical of them to take advantage of consumers like this and they should be held accountable. If I'm not mistake it says in "49 USC 30122(b)" that "Prohibition.-A manufacturer, distributor, dealer, rental company, or motor vehicle repair business may not knowingly make inoperative any part of a device or element of design installed on or in a motor vehicle or motor vehicle equipment in compliance with an applicable motor vehicle safety standard prescribed under this chapter unless the manufacturer, distributor, dealer, rental company, or repair business reasonably believes the vehicle or equipment will not be used (except for testing or a similar purpose during maintenance or repair) when the device or element is inoperative." 205/55 R16
- Power train
Transmission control module issues. Car was driving on the expressway and wouldn’t shift out of second gear. Engine light and AT light came on. Had to drive slowly on the expressway and get off on the closest exit. Cars were speeding past me and I had to be careful not to get hit. Research and shop shows the 2010 Mazda 3 vehicles have lots of issue with the TCM because they get hot due to there location.
- Unknown or other
Tha dashboard is melted causing glares on very sunny days and makes driving difficult.
- Service brakes
ABS or the ABS computer malfunction or wasn't working correctly and almost cause an accident.
- Unknown or other · Visibility/wiper
my Mazda 03 dashboard is melting, and I am not able to see out the window... I have talked to dealer and manufactory, and they will not pay the whole amount knowing it's a safety issue. I don't understand how they can sell product on car that is malfunctioning and a safety issue. I bought the car…
my Mazda 03 dashboard is melting, and I am not able to see out the window... I have talked to dealer and manufactory, and they will not pay the whole amount knowing it's a safety issue. I don't understand how they can sell product on car that is malfunctioning and a safety issue. I bought the car brand new in 2010 and didn't have any issues until this year. Please call me back at [XXX] my name is [XXX] . I was not in an accident, just think this is a safety issue. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Air bags
While driving on the interstate, the driver’s side airbag deployed without any obvious cause. There was no pothole, bump, or clear reason for the airbag to deploy. There was moderate traffic. This put myself and others nearby at risk by causing me to flinch after getting hit by the airbag. I was…
While driving on the interstate, the driver’s side airbag deployed without any obvious cause. There was no pothole, bump, or clear reason for the airbag to deploy. There was moderate traffic. This put myself and others nearby at risk by causing me to flinch after getting hit by the airbag. I was lucky to not swerve into anything or cause any damage. It caused temporary loss of hearing and a sore neck, but no serious injury. Prior to the failure, there were no dash lights, messages, or other symptoms.
- Service brakes · Wheels
ABS module malfunction all four wheel speed sensor not read in the same time and powersteering cut off cause by unready wheel speed check engine light ABS light and Steering Light on.
- Service brakes
ABS will cause complete brake failure when it is engaged. For example, needing to stop quickly to avoid hitting another vehicle and the brakes will lose all pressure and the vehicle will not stop. Several mechanics have not been able to diagnose or fix. Immediately after the incident, there will be…
ABS will cause complete brake failure when it is engaged. For example, needing to stop quickly to avoid hitting another vehicle and the brakes will lose all pressure and the vehicle will not stop. Several mechanics have not been able to diagnose or fix. Immediately after the incident, there will be minimal brake pressure of about 20%, eventually it will return to normal. Must avoid applying brakes in emergency situations as it will actually be worse than attempting to steer out of it. This has happened about 6 times in 4 years. It happened the first time about 3 days after I bought the vehicle in 2019.
- Electrical system · Engine
TCM has failed to communicate in engine. Car doesn’t not shift properly or has hard shifts if it is able to get back into gear. Car may experience AT engagement making it hard to steer and control vehicle. Can happen in the middle of driving. Independent service Auto mechanic shop Vehicle has no…
TCM has failed to communicate in engine. Car doesn’t not shift properly or has hard shifts if it is able to get back into gear. Car may experience AT engagement making it hard to steer and control vehicle. Can happen in the middle of driving. Independent service Auto mechanic shop Vehicle has no warning lights indicating failure until hard shift when driving 50miles per hour and engine would no longer speed up AT light then came on. Once parked for two days check engine light came on and vehicle no longer would shift into gear.
- Fuel/propulsion system
Fuel is leaking from the top of the gas tank, which is a very dangerous issue.
- Service brakes
ABS light stays on, break light stays on. ABS is not working.
- Steering
Power Steering sometimes works and sometimes not. Can go out and stop working or start working, in the middle of driving. i noticed Mazda has a recall for 2007, 2008, 2009 Mazda 3 cars, but *NOT* 2010 Mazda 3. I suspect the same issue.
- Visibility/wiper
The dashboard adhesive migrates to the surface of the dashboard. Adhesive then sublimates and condenses on the windshield making a glaze on the windshield, making it extremely difficult to see the road in sunrise or sunset conditions. I've repeatedly cleaned the windshield with many different…
The dashboard adhesive migrates to the surface of the dashboard. Adhesive then sublimates and condenses on the windshield making a glaze on the windshield, making it extremely difficult to see the road in sunrise or sunset conditions. I've repeatedly cleaned the windshield with many different cleaners including acetone, but at best I am only able to improve visibility, not restore it. In the attached photo, the upper portion of photo illustrates the film of adhesive on the glass after it was wiped with a clean paper towel, creating a hazy appearance. The entire windshield was cleaned with acetone and heavy duty degreaser and window cleaner prior to the photo.
- Electrical system › Instrument cluster/panel
The contact owns a 2010 Mazda Mazda3. The contact stated that the adhesive tape on the instrument panel was melt, making it difficult to see the instrument panel. The vehicle was taken to the dealer who stated that the instrument panel needed to be replaced. The vehicle was not repaired. The…
The contact owns a 2010 Mazda Mazda3. The contact stated that the adhesive tape on the instrument panel was melt, making it difficult to see the instrument panel. The vehicle was taken to the dealer who stated that the instrument panel needed to be replaced. The vehicle was not repaired. The manufacturer was contacted and made aware of failure. The contact was informed that an Extended Warranty for the failure had expired. The failure mileage was 105,000.
- Seats
Monday 7/10/2023 car was fine ie (the seat) next day Tues 7/11/2023 opened drivers side door couldn’t believe my eyes. The driver seat had somehow migrated clear up to an inch from my chest to the steering wheel. I called Maple Shade Turnersville to make an appointment-wasn’t able to get in until…
Monday 7/10/2023 car was fine ie (the seat) next day Tues 7/11/2023 opened drivers side door couldn’t believe my eyes. The driver seat had somehow migrated clear up to an inch from my chest to the steering wheel. I called Maple Shade Turnersville to make an appointment-wasn’t able to get in until 7/20/2023. I was told I had to return on 7/24/2023. Did that. Appt was 7:30AM. Was given a loaner car. At around 10:30 Am Mazda Tuenersville called to ask me to return the loaner (?). When I arrived Pat Kearny told me he couldn’t do anything to help with the car seat. Told me my car was too old that they didn’t make parts for my 2010 Mazda 3 for the already recalled seat problems. Now I’m in a big bind. My steering wheel is one inch from my chest. I am very upset what happened here.
- Seat belts
Mon-7/10/2023 used the car. Tues 7/11/2023 attempted to use my car opened the door on the drivers side-saw a bizarre position of the seat. It had somehow migrated during the night to approx 4” from the steering wheel when I try to get into the seat my chest stomach area is an inch away can’t reach…
Mon-7/10/2023 used the car. Tues 7/11/2023 attempted to use my car opened the door on the drivers side-saw a bizarre position of the seat. It had somehow migrated during the night to approx 4” from the steering wheel when I try to get into the seat my chest stomach area is an inch away can’t reach the pedals very well because my right knee is up against the dashboard. Took the car to the dealership the man in charge told me there’s nothing they could do the car is too old. He told me to take it to an independent repair shop to get the parts from junk yard. Said he would have to cut the bolts on the seat track said he couldn’t do that. Please see the photos and video.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007022Some vehicles may experience exterior trim heat damage such (melted, separating, etc.) when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 11007019If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
- 11006987In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealers responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the Speedometer Replacement Label. Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazdas vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMOs services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
- 11005671Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 11003398Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 10251387Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 10244679If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
- 10243569Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 10240496Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 10237216If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
- 10232299Speedometer replacement procedure
- 10226924If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices. Examples: 1. Devices connected to the DLC-2 (battery discharge/DTC stored) 2. Cell phone charger/accessory in 12V socket (engine no start or unable to turn off) 3. GPS tracking device (engine no start/battery discharge) 4. Dash cam (DTC stored) 5. Non-certified USB cable (Apple Carplay/ Android Auto will not connect) 6. Over-sized wheels/tires (incorrect GPS location)
- 10226814Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines below to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal.
- 10225724Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 10217209In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer.
- 10215274This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.
- 10213430Excessive condensation or water within the headlamp assembly caustion
- 10213429Paint damage Mazda pocket paint guide
- 10213427HandsFree bluetooth module and/or text messaging troubleshooting procedure
- 10213425Speedometer replacement procedure
- 10213423Siriusxm satellite radio registration transfer after unit replacement
- 10213422Proper usage of driver's floor mat.
- 10213421Condensation/Fog in front and rear combination lights
- 10213417Passenger fAirbag deactivation (PAD) indicator light illumination
- 10213399Brake noise, judder and dragging diagnosis and servicing
- 10213398Clunk/bang/buzz noise during first forward movement after sitting
- 10213387Shock absorber replacement guidelines
- 10213385Stains appear on wheels
- 10213333Battery test procedure requirements using the GR81291
- 10213332Battery Maintenance
- 10213330PreMixed long life "FL22" Engine Coolant
- 10213329Engine Start /Stop Procedure with room fuse removed
- 10213326Mazda guidelines for factory scheduled maintenance
- 10213185Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines below to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal.
- 10209778The Mazda DCA-8000 is required for all warranty battery testing. If the Mazda DCA-8000 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code.
- 10209761Accessory instructions can be found on OneMazda under Dealer Resources - Parts & Accessories.
- 10208567Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 10208556Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 10206002Automatic Transmission/Transaxle Cooler and Lines Flushing Procedure: Automatic Transaxle/Transmission (A/T) oil cooler and lines must be power flushed completely before an overhauled or replacement A/T is installed (except SKYACTIV-DRIVE). The most common cause of repeat A/T failures is lack of lubrication to the front and rear planetary gears. This is usually caused by an accumulation of metal particles and debris (from a previous A/T failure) on the internal mesh type baffle of the oil cooler. Power flushing will remove the restriction by back flushing, followed by forward flushing to dislodge a restriction, then back flushing again. This will in turn ensure full ATF flow for the transmission when it is operating.
- 10205994Battery Maintenance: This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.
Every Mazda MAZDA3 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.