2021 Mazda MAZDA3

Recalls

1 recall names the 2021 Mazda MAZDA3. Newest first.

• Tires › Valve

  Feb 22, 2021NHTSA 21V101000599 vehicles

  Mazda North American Operations (Mazda) is recalling certain 2021 Mazda3 and CX-30 vehicles. Air may suddenly leak from the tire air valve.

  Risk and remedy

  Risk

  A sudden air leak from the tire air valve may cause a loss of vehicle control while driving, increasing the risk of a crash.

  Remedy

  Mazda will notify owners, and dealers will replace all four tire air valves with new parts, free of charge. The recall began April 6, 2021. Owners may contact Mazda customer service at 1-800-222-5500 Option 4. Mazda's number for this recall is 4721B.

  Full recall details →

Owner complaints

What owners report most

1. Engine19
2. Forward collision avoidance8
3. Electrical system7
4. Unknown or other7
5. Service brakes5
6. Lane departure5
7. Power train4
8. Air bags4
9. Wheels2
10. Fuel/propulsion system2

Latest complaints

• Oct 13, 2026ME
  Electrical system
  While driving to work, the dashboard displayed “Charging system malfunction, pull over.” The driver pulled over safely. The vehicle has electric power steering, so a loss of charging power while driving could reduce steering assist and cause the vehicle to stall in traffic. This happened three…

  While driving to work, the dashboard displayed “Charging system malfunction, pull over.” The driver pulled over safely. The vehicle has electric power steering, so a loss of charging power while driving could reduce steering assist and cause the vehicle to stall in traffic. This happened three days after a Mazda dealer replaced the front passenger-side lower control arm. That part had failed at 111,777 miles, causing clunking under braking and making the car unsafe to drive (previously reported to NHTSA). This is the second safety-related failure on this vehicle in two weeks. The vehicle is again off the road pending dealer diagnosis. Reported to Mazda Customer Experience, case #00503860.

• Oct 8, 2026ME
  Suspension
  Vehicle: 2021 Mazda Mazda3 VIN: [XXX] Mileage at failure: 111,777 Date the problem started: [date you first heard the clunk] Location: [town], [XXX] Crash / fire / injury / death: No Was the vehicle moving? Yes Component: Suspension: Front (Lower Control Arm) Description: The front passenger-side…

  Vehicle: 2021 Mazda Mazda3 VIN: [XXX] Mileage at failure: 111,777 Date the problem started: [date you first heard the clunk] Location: [town], [XXX] Crash / fire / injury / death: No Was the vehicle moving? Yes Component: Suspension: Front (Lower Control Arm) Description: The front passenger-side lower control arm on my 2021 Mazda3 failed at 111,777 miles. The car began clunking loudly when braking and while driving. My mechanic inspected the car on a lift, identified the lower control arm as the source, and told me the car was not safe to drive. He suspects a failed or defective part. A bolt hole near the rear control arm mount was also found empty, with rust on the threads. The lower control arm holds the front wheel in place and carries the load under braking and steering. A failure like this could cause loss of steering control. The car has been off the road since the failure. I live in [XXX], where roads are heavily salted in winter. Mazda has issued earlier recalls on other models for corrosion in the front lower control arms that could let the ball joints separate. I’m concerned this may be a similar issue. I reported this to Mazda Customer Experience on October 8, 2026 (case number: [number]). The car is scheduled for diagnosis at Thompson’s, an authorized Mazda dealer in [XXX]. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

• Sep 28, 2026OR
  Power train
  Making sharp right turn out of parking lot under hard acceleration, car suddenly made terrible grinding sound that shook the whole car. Continued driving, within another quarter mile the whole car started shaking again with loud noise. Had car towed to Mazda where they discovered that the rear…

  Making sharp right turn out of parking lot under hard acceleration, car suddenly made terrible grinding sound that shook the whole car. Continued driving, within another quarter mile the whole car started shaking again with loud noise. Had car towed to Mazda where they discovered that the rear differential had failed. Rear differential replaced under warranty. Noticed faint high pitched sound coming from rear in months leading up to incident. Had differential and transfer case fluid changed less than 1000 miles and 1 month before incident making me wonder if fluid was underfilled/wrong fluid used or the diff was just bad.

• Sep 28, 2026OR
  Engine

  Low engine oil message appeared on dash. Had car towed to Mazda. Had valve stem seals replaced under warranty.

• Sep 28, 2026OR45,946 mi
  Service brakes

  Car made grinding sound with notable vibration when starting to move after shifting into drive. Felt like brakes weren't releasing. Had car towed to dealership where they diagnosed that the front left brake shim was damaged and making contact with the rotor, had to pay to fix it out of pocket.

• Jan 25, 2026MO
  Power train
  My rear differential case cracked, anytime the four wheel drive system was engaged the entire drivetrain would lock up. Luckily we were only on side roads so going less than 30 mph if we had been on the highway when this happened we could have been in an accident or lost control. The dealer did…

  My rear differential case cracked, anytime the four wheel drive system was engaged the entire drivetrain would lock up. Luckily we were only on side roads so going less than 30 mph if we had been on the highway when this happened we could have been in an accident or lost control. The dealer did confirm the problem and it was fixed under an extended warranty. There was no warning just all of a sudden a loud bang and all the wheels locked up. I have a copy of the video inspection done at the dealer if there's anyway to send that. I can get a copy of the repair invoice if needed

• Oct 27, 2025CA
  Suspension

  At 31,000 miles the control arm lower ball joints are torn on both lower. They must be replaced. This is a safety hazard. This should not be an issue with low mileage on this car.

• May 27, 2025MO
  Power train
  I was driving when all the sudden there was a loud bang sound. The differential housing cracked. The when awd is demanded the rear diff was was locking up instead of engaging. Luckily we were just on city streets and not on the highway as this rear wheel locking up could cause a crash. Mazda wasn't…

  I was driving when all the sudden there was a loud bang sound. The differential housing cracked. The when awd is demanded the rear diff was was locking up instead of engaging. Luckily we were just on city streets and not on the highway as this rear wheel locking up could cause a crash. Mazda wasn't very helpful with the replacement. Luckily I had a aftermarket warranty but it only paid for a used replacement, which is also failing. I have read lots of stories of this rear differential failure across all types of Mazda's from this era and really wish they would do the correct thing and resolve the problem.

• Apr 23, 2025PA
  Engine

  Spontaneous loss of power while driving on highway. Check engine light came on. Speed limited by car. Continues to vibrate especially at idle from cold start. Code P0304 intermittently popping up.

• Feb 28, 2025CACrash
  Electrical system · Steering · Vehicle speed control
  During the incident, the vehicle exhibited an uncontrollable malfunction—the steering wheel suddenly jerked sharply to the right while accelerating violently, leaving me unable to steer or brake effectively, the car was looking forward. The car ultimately came to a stop upon colliding with a truck…

  During the incident, the vehicle exhibited an uncontrollable malfunction—the steering wheel suddenly jerked sharply to the right while accelerating violently, leaving me unable to steer or brake effectively, the car was looking forward. The car ultimately came to a stop upon colliding with a truck parked diagonally in front of me. After impact, I observed that the front tires remained stuck in a turned-right position, with the steering wheel also locked in that position. This was not an isolated event. Multiple reports from Mazda owners describe similar experiences with their vehicles unexpectedly veering to the right and accelerating without driver input. Given these recurring reports and my own experience, I strongly suspect that a manufacturing defect—whether mechanical, electronic, or software-related—may have contributed to this accident.

• Feb 21, 2025AR
  Electrical system · Unknown or other
  The driver window, upon attempted to be let up, will start to go up then go all the way down, ignoring the function to go up. This is a safety concern, as harsh temperatures and foreign objects are able to enter the vehicle cabin at any time, including driving. The problem has been reproduced by a…

  The driver window, upon attempted to be let up, will start to go up then go all the way down, ignoring the function to go up. This is a safety concern, as harsh temperatures and foreign objects are able to enter the vehicle cabin at any time, including driving. The problem has been reproduced by a dealer, and the vehicle is available for inspection upon request. There are no warning indicators for this issue beyond witness the failure occur in real time.

• Feb 21, 2025AR
  Forward collision avoidance › Adaptive cruise control · Lane departure › Assist · Lane departure › Blind spot detection
  When this feature is left on in my vehicle, it will detect curves, vehicles, and objects that are not there, and as a result, will attempt to turn my steering wheel (safety concern). I have had to keep this feature turned off to prevent it wrecking the car, because I could be on a straight road…

  When this feature is left on in my vehicle, it will detect curves, vehicles, and objects that are not there, and as a result, will attempt to turn my steering wheel (safety concern). I have had to keep this feature turned off to prevent it wrecking the car, because I could be on a straight road, and it will detect a curve that isn’t there and begin turning the wheel, which could result in a fatal accident if not corrected and disabled by the driver. It is available for inspection upon request. As the dealer has not driven the vehicle, they have not recreated the error, however if anyone were to drive the vehicle, they would be able to observe the malfunction. The dealer has been made aware on many occasions, though they never documented it and only suggested that I turn the feature off, which automatically turns itself on upon ignition. There are no warnings that there is a malfunction; you only know there is an error once an alert pops up thinking you’re missing a curve and attempts to turn your steering wheel though there is no curve. This issue has persisted over the life of the vehicle.

• Feb 21, 2025AR
  Engine
  The thermostat malfunctioned on this vehicle, resulting in the thermostat remaining open and providing excess coolant to the engine, which in turn damaged internal components of the engine (compromises safety), decreased fuel economy, increased emissions (compromised safety), and decreased the life…

  The thermostat malfunctioned on this vehicle, resulting in the thermostat remaining open and providing excess coolant to the engine, which in turn damaged internal components of the engine (compromises safety), decreased fuel economy, increased emissions (compromised safety), and decreased the life of the engine within the vehicle. It is available for inspection upon request. The vehicle has been inspected by an independent mechanic and will be inspected by the Mazda dealership in 7 days. There were no prior warnings until the engine malfunction notice appeared, the vehicle began to make jolts and stuttering sounds, and the temperature gauge within the vehicle failed to rise to optimal range. As this occurred while the vehicle was in use (safety concern), though I was pushing the gas there would be delayed response due to improper temperature, which increased the risk for an accident to occur.

• Dec 16, 2024AZ
  Engine

  The contact owns a 2021 Mazda Mazda3. The contact received notification of an unknown Class Action Lawsuit Number however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.

• Nov 26, 2024IL
  Power train

  Radiators are failing 3 years after the warranty period. Its leading to coolant lost and perhaps overheating the engine.

• Nov 20, 2024NY
  Unknown or other
  My 2021 Mazda 3 was bought used in August 2023 and is about a year old in my possession. it has been at the Mazda dealership for repairs multiple times since August 2023. it dangerously stalls and hesitates when trying to accelerate from a stop position. When the brake pedal is released and I…

  My 2021 Mazda 3 was bought used in August 2023 and is about a year old in my possession. it has been at the Mazda dealership for repairs multiple times since August 2023. it dangerously stalls and hesitates when trying to accelerate from a stop position. When the brake pedal is released and I start to accelerate like merging onto highways,the car rumbles or shakes slightly and then shuts off. I Came across a review online that had the exact same problem and it stated a PCM update solved the issue. I have been to the dealer frequently since purchased and they kept my car for over a week and claimed they could not reproduce the customers complaint and there is no diagnostic code generated. There is Frequent parking light malfunction alerts, switch operation not accepted alerts, Brake alerts on desolate roadways I believe this vehicle behavior is dangerous on multiple levels, but the dealer Refused to remedy the complaint or give me copies of the papers that I signed, stating they are only for the dealership. I also received a notice in the mail for a class action settlement for faulty fuel pump used in MAZDA vehicles but not the 2021 Mazda 3 although it displays the same Dangerous behavior. So between the faulty fuel pump or required PCM update the vehicle is questionable to drive safely under certain circumstances. The dealer inferred I should have purchased a used certified Mazda from them instead. Thanks

• Sep 21, 2024CO
  Engine

  Low oil light - car is burning oil and only has 11,400 miles. Approx 3/4 to 1 quart missing...

• Sep 11, 2024CA
  Forward collision avoidance › Automatic emergency braking

  At red light, close behind car in front of the mazda. After light turns green, start driving the mazda after car in front moves forward. Although the car in front is moving forward at a higher rate of speed, increasing the distance between it and the mazda, the automatic emergency brake kicks on and stops the vehicle abruptly. Luckily the cars behind the mazda reacted in time and did not rear end it.

• Jun 21, 2024TX
  Unknown or other
  While driving at a normal speed on a clear, sunny day with no other vehicles close by, I heard a loud crash sound and my car's sunroof unexpectedly shattered. The inside glass panel looks like it's shattered and it caused tiny glass shards to fall inside the vehicle onto my right arm and the…

  While driving at a normal speed on a clear, sunny day with no other vehicles close by, I heard a loud crash sound and my car's sunroof unexpectedly shattered. The inside glass panel looks like it's shattered and it caused tiny glass shards to fall inside the vehicle onto my right arm and the surrounding area. I closed the cover to prevent more from falling. This occurred without any prior warning, signs, or symptoms such as unusual noises or warning lights from the car. This incident posed a significant safety risk, not only due to the distraction, shock of the sudden noise, glass falling, injury in a potential accident, but also the potential for physical harm from the glass shards. Thankfully, no injuries occurred, but the potential for serious harm was evident. This problem has not yet been inspected by the dealer or confirmed by an independent service center, and there has been no opportunity for an inspection by any manufacturer, police, or insurance representatives. However, I've reached out to Mazda, both locally and corporate and am receiving a run-around, no surprise. I will attach photos of the inside and the outside of the glass. The outside photo was taken after the cover was closed. However, the broken sunroof is available for inspection upon request.

• Jun 19, 2024MN
  Engine

  Driving on a remote highway in northern WI and low oil light illuminated, 1000 miles before oil change was due with less than 10k miles on the vehicle. Made it to a gas station and oil was a quart low. Vehicle burns over a quart every oil change interval, since this has been occurring since day 1 it is likely going to cause premature engine failure which would be a safety issue.

• Jun 19, 2024MN
  Service brakes

  Brakes are underpowered especially when hot. Drove 20-30 minutes in traffic and when decelerating from 60 mph highway in turn lane to turn into neighborhood the brakes felt very soft . Car only has 28k miles on it and pads have plenty of life left. Have seen similar complaints on online forums.

• Feb 20, 2024NY
  Unknown or other · Wheels
  For the past 7 months (since July 2023) the passenger rear tire keeps loosing air pressure about every two weeks requiring more air. It always drops to 10 points below the other tires. The tires have been rotated twice so it is not a problem with the tire. I believe there is a recall for the same…

  For the past 7 months (since July 2023) the passenger rear tire keeps loosing air pressure about every two weeks requiring more air. It always drops to 10 points below the other tires. The tires have been rotated twice so it is not a problem with the tire. I believe there is a recall for the same or similar issue on Mazda 3s just not including my VIN#. I brought my car to good year a few times unable to stop this from happening.

• Feb 15, 2024PA
  Structure › Body
  A bolt head underneath the car snapped for the steering mechanism. The problem was indicated by a clanking noise I heard for many 1000s of miles. It's been as long as I remember, but I had no idea what it really meant. It's 2.7 years old with 30,653 miles right now. There were no warnings. The…

  A bolt head underneath the car snapped for the steering mechanism. The problem was indicated by a clanking noise I heard for many 1000s of miles. It's been as long as I remember, but I had no idea what it really meant. It's 2.7 years old with 30,653 miles right now. There were no warnings. The wheel could have come off at any moment I was driving it. The bolt was likely over-torqued or had a manufacturing defect causing it to snap. I have pictures for when the car was propped up at a technician. One side is completely non rusted. The other side is showing rust ONLY from where the bolt was covering, so rust is an unlikely cause.

• Dec 30, 2023NC
  Unknown or other

  Part easily break away during washing. Fuel door cover lid panel (BDYT-42-411) broke in automatic car wash.

• Apr 6, 2023NY
  Engine

  Received Low Oil Level warning ... checked engine oil and it is under the minimum level on the dip stick. Car has only 11,725 miles

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11011345CUSTOMER SERVICE PROGRAM CSP12 - DENSO LOW-PRESSURE FUEL PUMP CUSTOMER SERVICE PROGRAM WARRANTY EXTENSION: Attention ALL Mazda Dealers: This is a Warranty Extension and not a recall campaign. Repairs are not to be made unless there is a confirmed low-pressure fuel pump failure within the coverage period. As of November 18, 2024 Repair Procedures and Parts and Warranty documents are available.
• 11011341CUSTOMER SERVICE PROGRAM CSP12 - DENSO LOW-PRESSURE FUEL PUMP CUSTOMER SERVICE PROGRAM WARRANTY EXTENSION: Attention ALL Mazda Dealers: This is a Warranty Extension and not a recall campaign. Repairs are not to be made unless there is a confirmed low-pressure fuel pump failure within the coverage period. As of November 18, 2024 Repair Procedures and Parts and Warranty documents are available.
• 11011338CUSTOMER SERVICE PROGRAM CSP12 - DENSO LOW-PRESSURE FUEL PUMP CUSTOMER SERVICE PROGRAM WARRANTY EXTENSION: Attention ALL Mazda Dealers: This is a Warranty Extension and not a recall campaign. Repairs are not to be made unless there is a confirmed low-pressure fuel pump failure within the coverage period. As of November 18, 2024 Repair Procedures and Parts and Warranty documents are available.
• 11011336CUSTOMER SERVICE PROGRAM CSP12 - DENSO LOW-PRESSURE FUEL PUMP CUSTOMER SERVICE PROGRAM WARRANTY EXTENSION: Attention ALL Mazda Dealers: This is a Warranty Extension and not a recall campaign. Repairs are not to be made unless there is a confirmed low-pressure fuel pump failure within the coverage period. As of November 18, 2024 Repair Procedures and Parts and Warranty documents are available.
• 11011331CUSTOMER SERVICE PROGRAM CSP12 - DENSO LOW-PRESSURE FUEL PUMP CUSTOMER SERVICE PROGRAM WARRANTY EXTENSION: Attention ALL Mazda Dealers: This is a Warranty Extension and not a recall campaign. Repairs are not to be made unless there is a confirmed low-pressure fuel pump failure within the coverage period. As of November 18, 2024 Repair Procedures and Parts and Warranty documents are available.
• 11011326CUSTOMER SERVICE PROGRAM CSP12 - DENSO LOW-PRESSURE FUEL PUMP CUSTOMER SERVICE PROGRAM WARRANTY EXTENSION: Attention ALL Mazda Dealers: This is a Warranty Extension and not a recall campaign. Repairs are not to be made unless there is a confirmed low-pressure fuel pump failure within the coverage period. As of November 18, 2024 Repair Procedures and Parts and Warranty documents are available.
• 11011141Some customers may report concerns with interior upholstery surface stains particularly on high contact areas (e.g.: seats, steering wheel, door panels, shifter...etc.). This may be caused by skin oils or chemicals such as hand lotions.
• 11011140When the Telematics Control Unit (TCU) replacement is necessary due to a failure, use MDARS to activate the new TCU after replacement. Use the information in this service alert to initialize the new TCU until the procedure on MGSS is updated.
• 11011139A customer may complain of a rattle noise from the right side of the dash. The noise may be coming from the passenger side airbag.
• 11011138Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF Climate Control 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or "\".
• 11011137On certain subject vehicles, the check engine light is illuminated with diagnostic trouble code (DTC) P0126, due to the fail-safe thermostat being stuck open. Additionally, you may notice one or more of the following symptoms: -Engine takes longer to warm up. -Engine temperature gauge fluctuates. -Low coolant temperature indicator (blue) light stays on longer or turns on while driving. -Poor heater performance, especially at idle. This warranty extension program applies only to the replacement of fail-safe thermostat of the vehicle exhibiting the concerns mentioned above. If the check engine light illumination is determined to be unrelated to the fail-safe thermostat being stuck open, the inspection and repair are not covered under this program.
• 11011133Some customers may experience a check engine light ON with DTC P0126:00 (Thermostat stuck open) and one or more of the following symptoms: Engine takes longer to warm up. Engine temperature gauge fluctuates. Low coolant temperature indicator (blue) light stays on longer or turns on while driving. Poor heater performance, especially at idle.
• 11010992Some customers may experience rear subwoofer audio sound pauses intermittently at high volume levels. When the volume level is lowered, the subwoofer audio sound resumes. The actual volume level may vary depending on the audio source. If the audio source consists of many low frequency (40 - 70 Hz) sounds, the concern may occur at volume level 35 or higher. This concern may be caused by improper audio amplifier control software. To eliminate this concern, the control software has been modified.
• 11009665Mazda Motor Corporation has decided to conduct a Special Service Program (SSP) to extend the warranty coverage for a specific repair of the fail-safe thermostat in the coolant control valve on certain CX-5, Mazda3, CX-3, Mazda6 and CX-30 vehicles that are equipped with the suspected coolant control valve. The warranty coverage for a specific repair of fail-safe thermostat has been extended to 15 years (180 months) /150,000 miles (240,000 km) whichever comes first, from the original warranty start date. Concern Outline: On certain subject vehicles, the check engine light is illuminated with DTC P0126:00 (Thermostat stuck open) stored in memory and one or more of the following symptoms may occur: Engine takes longer to warm up, Engine temperature gauge fluctuates, Low coolant temperature indicator (blue) light stays on longer or turns on while driving, Poor heater performance, especially at idle. This is a warranty extension for the specified repair only. Inspection and replacement of non-failed parts will not be eligible for reimbursement under this SSP to the dealer or customer. This program extends the warranty period for actual failures due to defects in workmanship or materials in accordance with the Mazda Warranty Policy and Procedures. If a customer arrives at your dealership with the concern described, please repair under this Special Service Program.
• 11009664Mazda Motor Corporation has decided to conduct a Special Service Program (SSP) to extend the warranty coverage for a specific repair of the fail-safe thermostat in the coolant control valve on certain CX-5, Mazda3, CX-3, Mazda6 and CX-30 vehicles that are equipped with the suspected coolant control valve. The warranty coverage for a specific repair of fail-safe thermostat has been extended to 15 years (180 months) /150,000 miles (240,000 km) whichever comes first, from the original warranty start date. Concern Outline: On certain subject vehicles, the check engine light is illuminated with DTC P0126:00 (Thermostat stuck open) stored in memory and one or more of the following symptoms may occur: Engine takes longer to warm up, Engine temperature gauge fluctuates, Low coolant temperature indicator (blue) light stays on longer or turns on while driving, Poor heater performance, especially at idle. This is a warranty extension for the specified repair only. Inspection and replacement of non-failed parts will not be eligible for reimbursement under this SSP to the dealer or customer. This program extends the warranty period for actual failures due to defects in workmanship or materials in accordance with the Mazda Warranty Policy and Procedures. If a customer arrives at your dealership with the concern described, please repair under this Special Service Program.
• 11009663SPECIAL SERVICE PROGRAM - SSPD5 - WARRANTY EXTENSION - MULTI-MODEL - VALVE STEM SEALS CLASS ACTION In conjunction with a Class Action Settlement, Mazda Motor Corporation has decided to conduct an extension of the Engine powertrain warranty related to excessive oil consumption. In addition, there is a Reimbursement Program, for limited qualifying out-of-pocket expenses (prior oil changes and additional oil purchased before the normal oil change interval due to oil consumption concerns) on certain CX-9, CX-5, Mazda6, Mazda3, and CX-30 vehicles equipped with a 2.5L turbocharged engine with the affected valve stem seals. For all Mazda dealers, an FAQ document for this Class Action Settlement and all documents for SSPD5 will be available on Mazda Global Service Support (MGSS) on or before May 13, 2024 concurrent with notification to the Settlement Class.
• 11009654The SKYACTIV-DRIVE FW6A-EL AT uses Automatic Transmission Fluid (ATF) Type: FZ. Only use ATF-FZ to fill or top off the fluid level. ATF-FZ is specially designed for use in the SKYACTIV-DRIVE series AT. It is a low viscosity formula with less friction for better fuel economy. NOTE: ATF-FZ is colored blue for easy identification.
• 11009647A new cylinder head assembly for service parts has been newly established for SKYACTIV-G 2.5 with cylinder deactivation when replacement is needed. Valves, valve springs, valve spring seats, and cotters (IN/EX) are included in the new assembly. Hotline and MASH authorization is not required to order parts for performing this repair. If there are any questions on part ordering or part status, contact the Dealer Assistance Group.
• 11009644Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
• 11009636Some vehicles may exhibit a rear console lid with a sticking feeling or a squeaking noise when opening and/or closing. This is caused by an inappropriate shape of the console lid hinge pin where the position of the hinge pin (1) becomes misaligned when the rear console lid is repeatedly opened and closed. When parts around the hinge pin thermally expand, the result creates a gap in the hinge of the rear console lid.
• 11009635Some customers may complain that the rear console lid does not slide smoothly. This may be caused by improperly positioned felt pads attached to the rear console lid lock, which may have moved out of position after repetitive use. The exposed adhesive residue may stick to the rail and disrupt smooth sliding operation.
• 11008580Mazda Connect Services - Frequently Asked Questions (FAQ)
• 11008579Mazda Connect Services - Frequently Asked Questions (FAQ)
• 11008578When the Telematics Control Unit (TCU) replacement is necessary due to a failure, use MDARS to activate the new TCU after replacement. Use the information in this service alert to initialize the new TCU until the procedure on MGSS is updated.
• 11008577Some customers may complain about scratches on the instrument cluster lens.
• 11008576Qi Wireless Charger symptom troubleshooting.
• 11008575Some customers may complain about the Active Driving Display not displaying turn by turn (TBT) travel direction or navigation information.
• 11008574Some customers may experience a Connected Vehicle failure. The MyMazda App may display an Error Code. This document provides Error Code description and recovery information to assist with repairs.
• 11008573Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF Climate Control
• 11008571Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
• 11008568Some customers may experience a Telematics Malfunction message in the instrument cluster with DTC U3000:00-TCU (Emergency call unit/telematics communication unit internal malfunction) or U3000:04-TCU (Telematics communication unit internal malfunction) stored in memory. This is caused by improper control software of the telematics communication unit (TCU). To eliminate this concern, the control software of the TCU has been modified.
• 11008430This information will give you the necessary knowledge to respond to customers concerns of Smart Brake Support (SBS) unintended braking. By educating the customer on the system operation, it should reduce their anxiety or distrust of the vehicle.
• 11008429Symptom 1: Some customers may complain about hearing a grinding noise and/or vibration occur when applying the brake. This is due to rust on the rear brake disc plate. The brake pad has insufficient disc-rust prevention performance, resulting in the disc plate rusting. To eliminate this concern, the pad material has been improved to prevent rust on the disc surface. Symptom 2: Some vehicles may exhibit a squeal noise from the rear brakes when braking lightly while driving at a slow speed. The squeal noise is caused by the disc pad surface fluctuating. To eliminate this concern, the brake pads have been modified.
• 11008423The Blind Spot Monitoring (BSM) system can malfunction with the following symptoms if the rear side radar sensors are installed facing the wrong direction. BSM system indicates vehicle on the opposite side. i-ACTIVSENSE indicator ring will not turn green Rear Cross Traffic Alert (RCTA) does not work Rear side radar sensor aiming may fail TPMS DTC(s) stored
• 11007029For improvement of electrical diagnosis, the SKYACTIV Wiring Terminal Test Kits has been delivered all the dealers. The terminal test kit enables you: To check pin fit drag of all PCM terminals used in SKYACTIV vehicles and compare suspect terminal drag with a known good terminal. To measure the voltage/resistance avoiding any terminal damage.
• 11007024Some customers will report that their fuel door was stuck closed and would not open to refuel the vehicle. Follow the repair steps below unless the conditions outlined in TSB 09-019/21 - FUEL-FILLER LID PANEL IS DEFORMED for 2019-2021 Mazda3 and 2020-2021 CX-30 are present.
• 11007022Some vehicles may experience exterior trim heat damage such (melted, separating, etc.) when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
• 11007019If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
• 11007018Interior parts made of resin have antistatic coating to prevent dust from sticking on the surfaces, and depending on the conditions of use, the antistatic components may crystallize slightly, giving an appearance of white stains on the surface. To remove the stains, wipe the stained surface with a towel soaked with water mixed with a small portion of a neutral detergent. If the white stains reappear again, simply wipe them again in the same way.
• 11007013Auxiliary key blank cutting procedure. There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method B. Auxiliary Key Code Cut Method

Every Mazda MAZDA3 model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.