2014 Mazda MAZDA3
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mazda › MAZDA3 › 2014
These records cover every 2014 Mazda MAZDA3. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
4 recalls name the 2014 Mazda MAZDA3. Newest first.
Mazda North American Operations (Mazda) is recalling certain 2014-2018 Mazda3 and 2016-2021 CX-3 vehicles. The rearview camera image may not display properly by showing a flickering or distorted image.
Risk and remedy
Risk
A rearview camera that does not display properly can reduce the driver's rear view, increasing the risk of a crash or injury.
Remedy
Dealers will inspect and replace the rearview camera, as necessary. In addition, dealers will install a wiring harness fastening seal. All repairs will be performed free of charge. Interim notification letters, notifying owners of the safety risk, were mailed September 13, 2023. Final owner letters for affected models and model years in the states of CT, MA, MD, NJ, NY, PA and VA were mailed August 14, 2024. The remaining owner notification letters will be mailed at a future date, anticipated on or before May 1, 2025. Owners may contact Mazda customer service at 1-800-222-5500, Option 6. Mazda's number for this recall is 6023G.
Mazda North American Operations (Mazda) is recalling certain 2014-2015 Mazda6 and 2014-2016 Mazda3 vehicles. Water could possibly enter the brake caliper causing the parking brake actuator shaft to corrode and possibly bind.
Risk and remedy
Risk
If the parking brake actuator shaft binds, the parking brake may not engage or disengage fully. If the parking brake does not engage properly, the vehicle may move unexpectedly if it is parked on a slope, increasing the risk of a crash.
Remedy
Mazda will notify owners, and dealers will check the parking brake actuator shafts, replacing any that are corroded, free of charge. Remedy parts are currently unavailable. Interim notices informing owners of the safety risk were mailed August 24, 2017. Owners will receive a second notice when remedy parts become available. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1217F.
Mazda Motors North American Operations (Mazda) is recalling certain model year 2014-2016 Mazda3 vehicles manufactured January 4, 2014, to September 18, 2015. The fuel tank of the affected vehicles may have been improperly handled during manufacturing and, as a result, the welded attachment of the Inlet Check Valve (ICV) may fail and allow fuel to leak.
Risk and remedy
Risk
A fuel leak in the presence of an ignition source increases the risk of a fire.
Remedy
Mazda will notify owners, and depending on the tank lot number, dealers will inspect the ICV weld, replacing the fuel tank, as necessary, free of charge. The recall began November 1, 2016. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 0116I.
Mazda North America Operations (Mazda) is recalling certain model year 2014 Mazda3 vehicles manufactured June 12, 2013, through December 18, 2013, and model year 2014-2015 Mazda6 vehicles manufactured May 20, 2013, through December 4, 2013, and both equipped with a 2.5L engine and a regenerative engine braking system. When driving the affected vehicles in…
Risk and remedy
Risk
Once the PCM assumes that the charging system has failed, the vehicle will stop charging and could result in poor acceleration, loss of steering assist and windshield wiper operation, and a possible engine stall, increasing the risk of a crash.
Remedy
Mazda will notify owners, and dealers will reprogram the PCM with updated software, free of charge. The recall began on May 19, 2014. Owners may contact Mazda at 1-800-222-5500. Mazda's number for this recall is 7314D.
Owner complaints
138 complaints10 involved a crash1 involved a fire5 injuries
What owners report most
Latest complaints
- Parking brake
The contact owns a 2014 Mazda Mazda3. The contact stated that when attempting to secure the vehicle, the electric parking brake failed to engage after pulling up the hand lever. The contact related the failure to NHTSA Campaign Number: 17V393000 (Parking Brake); however, the VIN was not included in…
The contact owns a 2014 Mazda Mazda3. The contact stated that when attempting to secure the vehicle, the electric parking brake failed to engage after pulling up the hand lever. The contact related the failure to NHTSA Campaign Number: 17V393000 (Parking Brake); however, the VIN was not included in the recall. The vehicle was previously taken to a dealer for an unrelated recall repair, but the parking brake failure was not addressed or resolved. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 70,000.
- Fuel/propulsion system
The fuel tank leaks fuel at a full tank and smells of gas in the cabin until about 3/4 tank. Car was dripping a large puddle of gas inside of a parking garage. Problem has been reproduced by my mechanic even after replacing the fuel pump retaining ring. It has not been inspected by the manufacturer…
The fuel tank leaks fuel at a full tank and smells of gas in the cabin until about 3/4 tank. Car was dripping a large puddle of gas inside of a parking garage. Problem has been reproduced by my mechanic even after replacing the fuel pump retaining ring. It has not been inspected by the manufacturer or police. CEL did not come on until recently reporting a very small EVAP leak. Inside the car and the surrounding area would smell of gasoline even if there was no leak in the ground.
- Parking brake
The contact's nephew owns a 2014 Mazda Mazda3. The contact stated that while parked on several occasions, the parking brake failed to engage, and there was no resistance. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 72,000.
- Back over prevention › Rearview system braking
The rear backup sensors no longer work and did not give any indication they stopped working. They do not detect cars driving up from behind when driving or switching lanes or objects or people behind the car anymore when you reverse. This happened without any notice or warning indications.
- Air bags · Seat belts · Unknown or other
Airbag warning symbol on dashboard flashes with or without passenger seated in front seat.
- Visibility › Defroster/defogger/hvac system
Blend door actuator linkage will not allow for heat to be turned on, will blow cool/cold air, have had it looked at and the gear teeth will not stay in line with on another to be able to turn when the knob inside the car is turned. I was told that this may be a recall but do not see anything listed, but that it is a known problem for this model of mazda 3 and ford expiditions
- Fuel/propulsion system
Gas tank is leaking from the TOP. I could smell gas after a refill (and refilling a portable tank) that I thought must have been a spill I hadn't noticed, and the smell faded. But then it happened again at the next refill, and I knew it wasn't just a spill. Brought it to our trusted mechanic who…
Gas tank is leaking from the TOP. I could smell gas after a refill (and refilling a portable tank) that I thought must have been a spill I hadn't noticed, and the smell faded. But then it happened again at the next refill, and I knew it wasn't just a spill. Brought it to our trusted mechanic who said that the TOP of the tank was rusted out (wow!)(so, not from road salt) and needs to be replaced. Not cheap, but worse, I'd been driving around in a very hazardous situation that Mazda knows happens. No warning lights, no recall. Thanks, guys. Here's a thread about this being a common issue: https://www.mazda3revolution.com/threads/2014-mazda3-fuel-tank-replacement.245797/
- Electrical system › Instrument panel › Speedometer/odometer · Engine
Odometer Fraud. The contact purchased a 2014 Mazda Mazda3. The contact stated that the vehicle was making an abnormal growling sound. The check engine warning light was illuminated. The contact discovered a mileage discrepancy after the purchase. The vehicle was a private sale. At the time of…
Odometer Fraud. The contact purchased a 2014 Mazda Mazda3. The contact stated that the vehicle was making an abnormal growling sound. The check engine warning light was illuminated. The contact discovered a mileage discrepancy after the purchase. The vehicle was a private sale. At the time of purchase, the vehicle mileage was 140,000. The vehicle was taken to the local dealer, where it was diagnosed and determined that the motor mounts needed to be replaced. It was later discovered that the Title mileage was 197,687.
- Air bags · Electrical system · Service brakes
The car screen displays, GPS, for calls, radio etc, doesn’t works, it’s off, and the airbags are deactivated and they’re off as well and have to press hard on the brake to get the car to stops.
- Fuel/propulsion system
Noticed strong smell of gasoline when the car was parked. Took it to an independent service dealer who diagnosed leaking fuel from top of the tank. Gas tank was removed and replaced. Tank cost was $380.00 plus repair shop labor/supplies cost. See attached invoice. During a recent online search for…
Noticed strong smell of gasoline when the car was parked. Took it to an independent service dealer who diagnosed leaking fuel from top of the tank. Gas tank was removed and replaced. Tank cost was $380.00 plus repair shop labor/supplies cost. See attached invoice. During a recent online search for this vehicles current book value I noticed there was a manufactures recall issued for this same problem, that I paid to have repaired. I never received any recall notice for a leaking gas tank problem for my vehicle.
- Unknown or other
Navigation touchscreen has deteriorated without any external damage to the point where it has false positives/ghost clicks. This randomly changes settings which include screen/instrument panel brightness which can be disorienting at night.
- Fuel/propulsion system
Gas tank is leaking. According to the records the service recall has been repaired (via a previous owner). However, what started out as fumes is now definitely a leak and the dealership will not repair under the recall a second time.
- Back over prevention › Sensing system › Camera
Rearview camera flickers or doesn't turn on at times.
- Unknown or other
My vehicle has intermittent functioning of rearview camera image while reversing. I can sometimes get it to work by opening an closing the rear hatch. Sometimes the image is clear, sometimes there is no image and sometimes it is distorted/rolls. Mazda notified me of the recall September 2023, but the company has failed to repair the defect within a reasonable amount of time.
- Back over prevention
The contact owns a 2014 Mazda Mazda3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The local dealer was made aware of the issue and confirmed that parts were not yet available. The…
The contact owns a 2014 Mazda Mazda3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The local dealer was made aware of the issue and confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Back over prevention › Sensing system › Camera · Electrical system
Due to improper design of the rearview camera wiring harness fastener, my rearview camera image has been distorted and flickering for years. There has been no remedy for this issue for many years now and its quite dangerous to have a camera that doesnt work at all.
- Back over prevention
The contact owns a 2014 Mazda Mazda3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable…
The contact owns a 2014 Mazda Mazda3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Back over prevention › Sensing system › Camera
The infotainment screen in my Mazda3 developed a large spider crack in the corner. It's available for inspection upon request. It affects my ability to read information on the screen, and partially obstructs my backup camera's image. The problem has been confirmed by both the dealer, who saw the…
The infotainment screen in my Mazda3 developed a large spider crack in the corner. It's available for inspection upon request. It affects my ability to read information on the screen, and partially obstructs my backup camera's image. The problem has been confirmed by both the dealer, who saw the issue firsthand, and Mazda (see Service Alert No.: SA-008/18, issued 02/20/2018 - please note, the spider crack I have is much larger than the ones in the pictures in the Service Alert). There was no warning this issue was going to affect my car, it just happened one day.
- Electrical system · Engine and engine cooling
The contact owns a 2014 Mazda Mazda3. The contact stated that while driving up an incline at an undisclosed speed, the vehicle temporarily lost motive power, and the contact became aware that the vehicle had failed to shift out of first gear. The contact stated that the vehicle returned to normal…
The contact owns a 2014 Mazda Mazda3. The contact stated that while driving up an incline at an undisclosed speed, the vehicle temporarily lost motive power, and the contact became aware that the vehicle had failed to shift out of first gear. The contact stated that the vehicle returned to normal functionality; however, the failure recurred several times while driving. Additionally, the contact stated that the instrument panel was functioning erratically, and the instrument panel lights frequently remained illuminated after turning off the vehicle. The check engine warning light was illuminated. The vehicle was taken to the dealer, where the failure could not be duplicated. The vehicle was then taken to an independent mechanic, where it was diagnosed that the head gasket seal had failed, which resulted in an oil leak. The vehicle was repaired, but the failure reoccurred. The vehicle was taken back to an independent mechanic, where it was diagnosed with electrical system failure. The vehicle was not repaired. The contact related the failure to NHTSA Campaign Number: 14V173000(Electrical System); however, the VIN was not included. The manufacturer was not notified of the failure. The failure mileage was 62,000.
- Electrical system
In reference to the existing recall on my vehicle (Manufacturer recall # 6023G, NHTSA recall #: 23V-487), I would like to report that the vehicle manufacturer (Mazda) has yet to offer a solution to this problem, which is now over a year old. In addition to the reported distortion/flickering from…
In reference to the existing recall on my vehicle (Manufacturer recall # 6023G, NHTSA recall #: 23V-487), I would like to report that the vehicle manufacturer (Mazda) has yet to offer a solution to this problem, which is now over a year old. In addition to the reported distortion/flickering from the rearview camera, we are experiencing times (about 1 in 10) where the image displayed from the rearview camera is simply a blank screen. This makes operating the vehicle in reverse more difficult and dangerous, especially in situations were visibility is limited (night, dark spaces, garage parking, etc.). This is a safety issue, first and foremost, and a solution from the manufacturer is long overdue.
- Back over prevention › Rearview system braking · Electrical system · Unknown or other
There is an existing recall on my car 2014 Mazda 3 dated July 14, 2023 for the glitches with rearview mirror and rearview mirror disconnecting at random. While this has been outstanding for one year Mazda discourages customers from scheduling appointment to get the vehicle inspected and fixed in…
There is an existing recall on my car 2014 Mazda 3 dated July 14, 2023 for the glitches with rearview mirror and rearview mirror disconnecting at random. While this has been outstanding for one year Mazda discourages customers from scheduling appointment to get the vehicle inspected and fixed in accordance to the guidance listed in NHTSA recall. I visited Capitol Mazda San Jose on 11/18/23 as well as called them to schedule a check on 7/17/24 but both these times I was informed that there are no parts to be replaced. I believe the remedy listed with NHTSA is not being followed and the customers do not have a timeline to get a resolution to this issue. I'm sharing the remedy listed by NHTSA. "Dealers will inspect vehicles. If inspections verify no concern with the rearview camera image, a wiring harness fastening seal will be added to prevent harness movement. If inspections verify there is image distortion or flickering, the rearview camera will be replaced with a new part and a wiring harness fastening seal will be added." I'm unable to understand if there are efforts by Mazda to provide sufficient labor work to inspect the vehicle and the fastening seals are at all in their timeline. I think NHTSA should assess what progress has been made by Mazda in resolving this critical recall.
- Fuel/propulsion system
I thought I smelled gasoline when sitting in my car. I got out and inspected all around the vehicle, discovering that gasoline was leaking underneath. Both the hazardous fumes and the potential for a fire in the vehicle put me at risk. The loss of fuel on public roads could have resulted in…
I thought I smelled gasoline when sitting in my car. I got out and inspected all around the vehicle, discovering that gasoline was leaking underneath. Both the hazardous fumes and the potential for a fire in the vehicle put me at risk. The loss of fuel on public roads could have resulted in danger to anyone behind me on the road due to the fire hazard and potential loss of traction before I noticed the problem. I immediately brought the car to my mechanic's personal shop (he is also a master mechanic at a local automotive dealership). He confirmed that the leak was gasoline and diagnosed the problem as a rusted seam near the top of the fuel tank having ruptured, allowing the leak and filling the cabin of the vehicle with fumes. I knew that the local Mazda dealership would be unable to repair this promptly, if at all, since they had just fixed the exact same problem in my mother in law's vehicle of the same make, model, and year, and had struggled to get the replacement tank for weeks due to the supply chain problems experienced during the COVID-19 pandemic. Therefore, I paid my own mechanic to source and install a tank, and coat it with anti-corrosion treatment. I contacted Mazda, explained the problem, and demanded they reimburse me, as the car was only 8 years old at the time. The Mazda representative refused to do anything to help me and did not answer my subsequent emails, so I posted about this problem on the [XXX] forum, and discovered others have had the same problem as my mother in law and I. There were no warning signs of the problem other than the smell of gasoline. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Unknown or other
The manufacturer has not provided a timely remedy for a known safety issue on the backup camera for my car. (Jul 14,2023; Manufacturer Recall Number6023G; NHTSA Recall Number23V-487). I purchased the car in 2014. Around 2017, the backup camera began flickering and sometimes failing to load…
The manufacturer has not provided a timely remedy for a known safety issue on the backup camera for my car. (Jul 14,2023; Manufacturer Recall Number6023G; NHTSA Recall Number23V-487). I purchased the car in 2014. Around 2017, the backup camera began flickering and sometimes failing to load completely. I took the vehicle to the Mazda dealership in Tustin, CA and they said there was nothing wrong with the camera. They said that I would have to pay approximately $500 for a new camera if I wanted one. I could not afford to replace the camera at that time, so the problem has persisted ever since. In July 2023, a notice of a safety recall was issued for the same issue with the camera. On [XXX], I took the vehicle to the same Mazda dealership and asked for the camera to be replaced due to the recall. They inspected the vehicle and agreed the camera was defective; however, they said they didn't have the parts yet to replace the camera and that I would receive something "official" about the recall later. It is now April 2024 and I have heard nothing. This safety issue has been going on for 7+ years and Mazda needs to take responsibility. The fact that they wanted to charge me for the camera in 2017 and now they say no cameras are available leaves me to believe that they are stalling and just don't want to incur the cost to fix the safety issue. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Engine · Vehicle speed control
While accelerating onto a highway, my engine overheating light flashed then stayed on and my acceleration suddenly throttled back and my car started slowing down. I was able to pull over on the shoulder, but there was a close call with a semi bearing down. I had my car towed to a repair shop, where…
While accelerating onto a highway, my engine overheating light flashed then stayed on and my acceleration suddenly throttled back and my car started slowing down. I was able to pull over on the shoulder, but there was a close call with a semi bearing down. I had my car towed to a repair shop, where they told me the water jacket had cracked and the overheating caused a blown head gasket. This was repaired and tested. A week later, I got the car up to highway speeds and the engine overheating light flashed again. When I stopped and looked at the engine, there was foamy tan coolant all over the place. Towed it back again and was told the weld had failed. But in trying to find a used cylinder to replace mine, the shop told me that all of their sources said they had no used ones available because the same crack happened on those as well.
- Back over prevention
The contact owns a 2014 Mazda Mazda3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The local dealer was contacted, and it was confirmed that the part was not yet available. The contact…
The contact owns a 2014 Mazda Mazda3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The local dealer was contacted, and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated that the camera image was distorted. The failure mileage was unknown. VIN tool confirms parts not available.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11011141Some customers may report concerns with interior upholstery surface stains particularly on high contact areas (e.g.: seats, steering wheel, door panels, shifter...etc.). This may be caused by skin oils or chemicals such as hand lotions.
- 11009654The SKYACTIV-DRIVE FW6A-EL AT uses Automatic Transmission Fluid (ATF) Type: FZ. Only use ATF-FZ to fill or top off the fluid level. ATF-FZ is specially designed for use in the SKYACTIV-DRIVE series AT. It is a low viscosity formula with less friction for better fuel economy. NOTE: ATF-FZ is colored blue for easy identification.
- 11009644Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
- 11008577Some customers may complain about scratches on the instrument cluster lens.
- 11007029For improvement of electrical diagnosis, the SKYACTIV Wiring Terminal Test Kits has been delivered all the dealers. The terminal test kit enables you: To check pin fit drag of all PCM terminals used in SKYACTIV vehicles and compare suspect terminal drag with a known good terminal. To measure the voltage/resistance avoiding any terminal damage.
- 11007022Some vehicles may experience exterior trim heat damage such (melted, separating, etc.) when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 11007019If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
- 11007018Interior parts made of resin have antistatic coating to prevent dust from sticking on the surfaces, and depending on the conditions of use, the antistatic components may crystallize slightly, giving an appearance of white stains on the surface. To remove the stains, wipe the stained surface with a towel soaked with water mixed with a small portion of a neutral detergent. If the white stains reappear again, simply wipe them again in the same way.
- 11007013Auxiliary key blank cutting procedure. There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method B. Auxiliary Key Code Cut Method
- 11007010Some customer's might state that they notice fluid or oil leaking/dripping on the ground when the vehicle is parked. For this concern, inspect the vehicle for any trace of a fluid or oil leak and use the following examples as a guide to determine if it is severe enough to require a repair, or just to clean the area and monitor it at the next service.
- 11007009Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
- 11006998Use the symptom troubleshooting tables below to diagnose MAZDA CONNECT concerns.
- 11006987In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealers responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the Speedometer Replacement Label. Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazdas vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMOs services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
- 11006917Some customers may complain that their liftgate does not open. This can mean a range of things, from the liftgate not unlatching to the power liftgate (PLG) not opening automatically. If you confirm that the customer's concern is that the liftgate does not unlatch correctly, follow the repair information below.
- 11005671Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 11003398Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 11003397Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains or discoloration.
- 11003396Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
- 11000772Some customers may complain that the ambient temperature on the instrument cluster is displayed more than 50 F (10 C) lower than the actual temperature, resulting in insufficient performance of the air conditioning. This is caused by inappropriate soldering in the ambient temperature sensor. To eliminate this concern, the soldering process has been enhanced at the supplier.
- 10254191Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains or discoloration.
- 10254188Some customers may complain that the ambient temperature on the instrument cluster is displayed more than 50 F (10 C) lower than the actual temperature, resulting in insufficient performance of the air conditioning. This is caused by inappropriate soldering in the ambient temperature sensor. To eliminate this concern, the soldering process has been enhanced at the supplier.
- 10254187Some customers may complain about infotainment center display. Peeling, spider cracks and white dots.
- 10252508Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
- 10251387Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 10251368Use the symptom troubleshooting tables below to diagnose MAZDA CONNECT concerns.
- 10244679If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
- 10243569Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 10243568Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
- 10243551Service bulletin 09-031/20 issued on 09/21/20 IS no longer valid. It IS superceded by recall 6023g (2014-2018 mazda3 and 2016-2021 CX-3 - rearview image may not display properly).
- 10241637Some customers may complain about scratches on the instrument cluster lens.
- 10240496Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 10240431Some vehicles may exhibit a distorted image or no image from the rear mount camera when shifted into reverse. Due to friction, the coating of camera socket terminals may wear out, creating high electrical resistance. NOTE: The icons and the messages are displayed normally.
- 10240427Be advised that TSB "09-031/20 - REAR MOUNT CAMERA IMAGE NOT CLEAR/NO IMAGE ON SCREEN" is no longer valid and has been superseded by "RECALL 6023G - 2014-2018 MAZDA3 AND 2016-2019 CX-3 - REARVIEW IMAGE MAY NOT DISPLAY PROPERLY". Use the link below to view the recall: RECALL 6023G - 2014-2018 MAZDA3 AND 2016-2019 CX-3 - REARVIEW IMAGE MAY NOT DISPLAY PROPERLY
- 10238697Interior parts made of resin have antistatic coating to prevent dust from sticking on the surfaces, and depending on the conditions of use, the antistatic components may crystallize slightly, giving an appearance of white stains on the surface. To remove the stains, wipe the stained surface with a towel soaked with water mixed with a small portion of a neutral detergent. If the white stains reappear again, simply wipe them again in the same way. NOTE: The antistatic effect does not deteriorate with this procedure.
- 10238695Some customers may complain of a lack of power under heavy load without any warning lights or DTCs. This concern may be due to a loose or detached hood weatherstrip, which can cause a blockage or restriction in the air intake system.
- 10238663Some vehicles may exhibit oil leakage from the drive belt auto tensioner and rattling noises from the engine compartment. This may be caused by insufficient sealing at the drive belt auto tensioner damper when the auto tensioner fully operates under both high ambient temperature and high load conditions. To eliminate this concern, the shape of the drive belt auto tensioner damper has been changed.
- 10237217Use the symptom troubleshooting tables below to diagnose MAZDA CONNECT concerns.
- 10237216If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
- 10237215Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains or discoloration.
- 10237199Some vehicles may experience the check engine light and automatic transaxle warning light ON with one or more of these DTCs stored in the TCM memory (P0842, P0847, P0872, P0877, P0780, P1738).
Every Mazda MAZDA3 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.