2013 Mazda MAZDA3

Recalls

1 recall names the 2013 Mazda MAZDA3. Newest first.

• Structure › Body › Hatchback/liftgate

  Sep 6, 2016NHTSA 16V644000580,455 vehicles

  Mazda North American Operations (Mazda) is recalling certain model year 2010-2013 Mazda3 and Mazdaspeed3 vehicles manufactured November 18, 2008, to June 8, 2013, 2012-2015 Mazda5 vehicles manufactured October 26, 2010, to June 22, 2015, 2016 CX-3 vehicles manufactured June 1, 2015, to December 26, 2015, and 2013-2016 CX-5 vehicles manufactured December 15…

  Risk and remedy

  Risk

  If the lift gate falls unexpectedly, it may hit the user, increasing their risk of injury.

  Remedy

  Mazda dealers will replace the both lift gate supports, free of charge, however parts are not currently available. The recall began April 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9916H.

  Full recall details →

Owner complaints

What owners report most

1. Exterior lighting36
2. Electrical system32
3. Power train18
4. Service brakes15
5. Engine11
6. Structure11
7. Unknown or other10
8. Steering9
9. Seats9
10. Air bags7

Latest complaints

• May 1, 2025CA
  Service brakes
  The Brake Pedal consistently malfunctions, even after the replacement of the master cylinder (by independent service center). The master cylinder does not hold pressure due to a faulty ABS control unit (which, when Mazda was contacted, said that part was on backorder until September). If the…

  The Brake Pedal consistently malfunctions, even after the replacement of the master cylinder (by independent service center). The master cylinder does not hold pressure due to a faulty ABS control unit (which, when Mazda was contacted, said that part was on backorder until September). If the manufacturer knows this is an issue and can't supply the part due to so many replacements needed in their vehicle, why is there no recall? There is no warning to the driver on the dashboard of this issue and has causes repeated issues while breaking.

• Feb 14, 2024SC
  Electrical system · Exterior lighting
  There seems to be a lot of people who own 2012 and 2013 Mazda 3 Sedans (with SKYACTIV-G 2.0L and Halogen Type Headlights) that are dealing with the same issue I am dealing with myself. I have just purchased a used 2013 Mazda 3 with Skyactive Technology and I noticed that when I was braking the…

  There seems to be a lot of people who own 2012 and 2013 Mazda 3 Sedans (with SKYACTIV-G 2.0L and Halogen Type Headlights) that are dealing with the same issue I am dealing with myself. I have just purchased a used 2013 Mazda 3 with Skyactive Technology and I noticed that when I was braking the headlights would pulse on and off and would continue while I braked. I have been told there is a TSB on this issue (attached) and Mazda is well aware of this happening. This concern is caused by inadequate alternator output controlled by the PCM when the battery is under a heavy load. They are to the point now of charging people for a doing the TSB on the car that is causing the problem of the alternator not producing the proper wattage to support both the headlights and the brake lights at the same time. There are numerous online forum entries that speak of this issue with 2012 and 2013 Mazda 3's. I am very concerned that my headlights may stop working which could result in my death or the death of my occupants of my vehicle not to mention the other motorists on the road around me if my head lights were to eventually fail at night due to lack of proper wattage to the headlights. There are videos on you tube that show these pulsing headlights on Mazda's. I believe that headlights are important enough safety issue that their failing could result in death if the headlights completely failed due to the known fault in these vehicles over time.

• Nov 26, 2023MD
  Power train
  Transmission Control Module malfunction. The AT light came on and the car made a jerking motion and a clunking noise. It lost power and would not shift which is very dangerous in moving traffic. It put me at risk for getting hit by another vehicle not expecting the abrupt change in speed by my…

  Transmission Control Module malfunction. The AT light came on and the car made a jerking motion and a clunking noise. It lost power and would not shift which is very dangerous in moving traffic. It put me at risk for getting hit by another vehicle not expecting the abrupt change in speed by my vehicle. The check engine light is now lit up. There were no warning lights before the vehicle’s transmission malfunctioned. A code came up on the vehicle when tested. U0101 lost communication with TCM. From what I have read, researched, and have been told this issue is very common for certain years of Mazda 3’s including mine.

• Aug 24, 2023HI
  Structure
  The contact owns a 2013 Mazda Mazda3. The contact received notification of NHTSA Campaign Number: 16V644000 (Structure) however, the part to do the recall repair was not yet available. The local dealer was contacted, and the contact was informed that the part for the recall repair was not yet…

  The contact owns a 2013 Mazda Mazda3. The contact received notification of NHTSA Campaign Number: 16V644000 (Structure) however, the part to do the recall repair was not yet available. The local dealer was contacted, and the contact was informed that the part for the recall repair was not yet available. The manufacturer was made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.

• Aug 7, 2023FL
  Seat belts

  All my seatbuckels are tearing. I thought it could of been my dog, but I a certain I did not give up my seat or let him drive. My driver side is also tearing. I noticed the buckle catching when securing it, and now it has moved past snag and had a quarter inch tear that it catches on. The buckle is not wide enough for the belt. The belt is no longer able to constraint as good as when it was whole. Unknown

• Jun 10, 2023CA
  Fuel/propulsion system

  After filing up the gas tank, there is a strong smell of fuel coming from the car. It remains strong until the tank is run down to about 3/4. Gas can be seen dripping down the tank under the car. Gas drips are clearly visible on the ground. This has been an ongoing problem for approximately two years.

• Feb 16, 2023TN
  Engine · Power train · Steering

  Steering becomes unpredictable and stiff accompanied by surging and loss of power. Check engine light comes on. Code P0882

• Jan 29, 2023TX
  Electrical system · Service brakes
  ABS Module suddenly start failing causing brake sinks down. Almost crashed because of it. It appears to be a very common issue but Mazda still does not recall these ABS modules made by Ford/ATE. Also, it does not show any ABS warning light, which might be why not many people have called on this as…

  ABS Module suddenly start failing causing brake sinks down. Almost crashed because of it. It appears to be a very common issue but Mazda still does not recall these ABS modules made by Ford/ATE. Also, it does not show any ABS warning light, which might be why not many people have called on this as they probably thought it was normal. There is all sort of communication error codes if you read with a OBDII scanner. In fact, Ford had a recall for these ABS modules, citing "stuck or slow-responding valves due to reaction with brake fluid".

• Aug 4, 2022GA
  Unknown or other

  I had the dashboard recalled and replaced. The new dashboard is separating from the computer screen on dash.

• Apr 22, 2022NC
  Electrical system · Power train · Unknown or other

  Tracking number 11461728 added information email from manufacture mitsubushi electric incorporated

• Apr 21, 2022NC
  Electrical system · Power train
  The TCM - Transmission Control Module defected - gear lights disappear, down shifting problems, driving, stop in the middle of highway or road while driving, kick / jerk when ATF lights comes on goes off then check engine lights comes on all fluids has been changed drove good for a few days…

  The TCM - Transmission Control Module defected - gear lights disappear, down shifting problems, driving, stop in the middle of highway or road while driving, kick / jerk when ATF lights comes on goes off then check engine lights comes on all fluids has been changed drove good for a few days started again took to advance auto parts and auto zone codes stated electrical TCM computer issues, delayed shifting, check engine and ATF lights comes on , DTC codes U1000, LOST COMMUNICATION WITH TCM. The TCM overheats because it is sitting directly on the transmission, under the battery box. My child safety was put at risk daily. This car fails to stop at a traffic light, a slow response when approaching a stop sign or traffic light is dangerous and scary. Mazda's are not safe to drive with a bad TCM, When a driver cannot anticipate the acceleration or deceleration of this vehicle or any Mazda with a TCM the situation is very dangerous. I visited Flow Mazda 04/21/2022 Fayetteville North Carolina invoice number Q10296 took the part for viewing. THE dealership informed us that no one has this part and do not know if the will ever have another shipment. we contacted salvage yards received the same answer. I have sent 8 emails stating problems to the manufacture (Mitsubishi electric company) no response thus far. This is my daughter first year in college she saved her summer money 6600.00$ and purchased this car in March 16, 2022 from Knox auto sales 107 NC-55E, Dunn NC 28334. First day we had all fluids changed. The third day she went to visit her dad 20 minute drive ATF light came on went to auto zone code warning electrical communication, purchased new battery drove car for 5 days good took car to college in Charlotte came home birthday Friday check engine light and TCM code went to church Easter Sunday almost didn't make it home. According to the you tube channels and social media this is a known failure for Mazda automobiles Why are the cars being sold?

• Dec 14, 2021PA
  Engine

  Blower motor stopped working summer of 2020. Had it replaced at the dealership and it again stopped working in summer of 2021. Had it replaced once again and it is now making horrible noises again as it did right before it blew up the last two times

• Oct 12, 2021CA
  Exterior lighting

  When driving at highway speeds and applying brakes, the headlights will pulse bright to dim for the duration of braking. I have seen this problem reported online by several dealers and it has a known software update to fix the problem, but it is not listed under the recalls for this vehicle. A similar problem exists on the 2014 Mazda's and a recall does exist for that vehicle.

• Jun 8, 2021PA
  Power train
  There is a loud winding sound sound coming from the transmission and sound of metal (broken teeth) as well. We took it to a Mazda dealer and they quickly identified the issue as a failing transmission. As a result I was able to find that a service bulletin aligned with this issue (TSB No. 0500414)…

  There is a loud winding sound sound coming from the transmission and sound of metal (broken teeth) as well. We took it to a Mazda dealer and they quickly identified the issue as a failing transmission. As a result I was able to find that a service bulletin aligned with this issue (TSB No. 0500414) and confirmed this with the dealer. This service bulletin indicates a manufacturing issue but only applied a warranty of 6 years or 60,000 miles. Yes, our car is over the 6 yrs and only 800 miles over the 60,000 miles, however, my concern is that this is a known issue that clearly becomes a safety issue. We got a price from the dealer of $4,500 for a new transmission so I took it to a transmission shop for a 2nd opinion. They confirmed the failing transmission and indicated the car should not be driven for safety reasons. They said the transmission is in bad shape and when it fails the car will just stop creating a very unsafe condition. They are able to find a used transmission and install it for an estimate of $2,700 but I believe this should be covered by Mazda due to the safety concerns. I have no choice to proceed with this replacement but hope that you can help to get Mazda's attention and have them stand behind this and cover this cost.

• May 9, 2021WA116,427 mi
  Seats

  Exact same issue as campaign number: 17v082 the seats in this year of mazda 3 are the same as in the 2010-2011 models. The metal has snapped in half causing the need for repair for safe driving. this happened while turning a corner on a city street going about 30km/h driver IS 260lbs

• Apr 16, 2021MI
  Structure › Body · Unknown or other
  The instrument panel has come loose, and there IS a opening, the inside of it IS chipped as well and it IS foggy. Just normal driving to and from work. Mazda offered a special service warranty, which my car did not qualify because this gap had not occurred yet. Conveniently, the extension expired…

  The instrument panel has come loose, and there IS a opening, the inside of it IS chipped as well and it IS foggy. Just normal driving to and from work. Mazda offered a special service warranty, which my car did not qualify because this gap had not occurred yet. Conveniently, the extension expired before my panel started coming apart. I spoke with mazda today and they told me I was to late. Well I was ineligible because it hadn't come apart yet. Apparently they are aware of this problem as they did off a special warranty for it. All models that had these defective panels or bad adhesive from the same lot regardless if they had started to come apart yet, should have been replaced so this wouldn't happen. I understand normal wear and tear. If this IS just chocked up to normal wear and tear the rest of the interior should also be falling apart, because the whole car has been subjected to the same environment and that IS not falling apart yet. I am one person, with one voice maybe other mazda owners who were denied eligibility to have this instrument panel replaced, will also complain and something can happen to fix this manufacturer problem. As this IS not a part that should have passed quality control. Date IS approximate as it occurred gradually over time and did not become noticeable until late last year.

• Mar 15, 2021NJ
  Exterior lighting

  When applying the brakes, the headlights dim and flicker until the brake pedal IS released. nighttime viability IS substantially diminished when applying the breaks and flickering seams to send a signal to other vehicles in front of me. this defect occurs 100% of the time when applying the beaks at night when the headlights are on.

• Mar 12, 2021GA173,001 mi
  Exterior lighting · Power train · Visibility/wiper

  When you press on the brakes all the vehicles lights flashing from bright to deem the headlights, inside panel lights flashing from bright to deem making it difficult to see at night it acts like car IS losing power

• Feb 9, 2021OR72,000 mi
  Exterior lighting

  Ongoing problem - reported by others in many forums. Technical service bulletin issued. During breaking headlights pulse brighter and dimmer

• Dec 20, 2020VA
  Electrical system · Engine
  I have had my car since 2013 and had no problems with it until I got a new battery for my car. As soon as I got a battery my car would die every other day. I took it to many mechanics and back to the mazda dealer to see if they could fix it. The mechanics didn't know what was wrong with it and when…

  I have had my car since 2013 and had no problems with it until I got a new battery for my car. As soon as I got a battery my car would die every other day. I took it to many mechanics and back to the mazda dealer to see if they could fix it. The mechanics didn't know what was wrong with it and when I took it to mazda they said it was because my car door light was on, even though it never was. They claimed they fixed it and two days later my car was dead again. Every mechanic and the mazda dealer said nothing was wrong with the car and they didn't know what was happening. The vehicle sits now because I can't keep calling my insurance company every other day to come out and jump start my car for me.

• Dec 2, 2020KY60,000 mi
  Power train

  My mazda 3 sedan with a 6 mt has an issue while coasting in 4TH gear between 25-40 mph and accelerating up hill that the gear will jump into neutral without depression of the clutch. There IS no grinding or other odd noises other than the shifter snapping out of gear. This happens often enough that I have begun to skip the gear entirely.

• Nov 27, 2020FL38,000 mi
  Seat belts · Unknown or other
  I purchased a 2013 mazda 3 in march or 2020 with about 35000miles. About two months later I put down my back seats for the first time and noticed the middle seat buckle was fringed and looked cut about a half of inch in. It could not retract due to the buckle snagging on the cut. It IS november…

  I purchased a 2013 mazda 3 in march or 2020 with about 35000miles. About two months later I put down my back seats for the first time and noticed the middle seat buckle was fringed and looked cut about a half of inch in. It could not retract due to the buckle snagging on the cut. It IS november 2020 and I have now descoveres that this same thing has happened to the driver and front passenger buckles as well. I rarely have anyone in my back seat, maybe twice since the purchase, so the buckles are not frequently used. I think something IS cutting the belt causing the buckles to stop retracting- rendering them useless. My car has 49000miles now. I discovered all of the belts while stationary. But the drivers one would not retract causing me to look for it.

• Mar 1, 2020KS
  Exterior lighting · Unknown or other · Visibility/wiper

  Lighting:when applying breaks, headlights flicker. Windshield: leaks. Adhesive expanded, causing seal to break. Water pours in on dash from side during bad weather conditions or car wash. Adhesive also expanded on gauge panel, causing display window to lift. Was this way when purchased. Did not notice headlights and window seal at time of purchase.

• Feb 18, 2020IA95,000 mi
  Exterior lighting
  Description this vehicle exhibits the headlights flickering when the vehicle IS decelerating (by applying the brakes) with the headlights on. This concern IS caused by inadequate alternator output (controlled by the pcm) when the battery IS under heavy load. To correct the problem, the control…

  Description this vehicle exhibits the headlights flickering when the vehicle IS decelerating (by applying the brakes) with the headlights on. This concern IS caused by inadequate alternator output (controlled by the pcm) when the battery IS under heavy load. To correct the problem, the control logic of the pcm has been changed. Mazda will not update the pcm without charging customers a diagnostic and reprogramming fee in the us.

• Jan 6, 2020IL55,000 mi
  Power train

  Sometimes the shifter jumps out of 3RD gear over a road bump when accelerating after deceleration at 30-40 mph. It always happens while city/suburb driving. It's startling when it happens and I try to quickly put the car back in a gear. it wasn't happening that frequently but now it's about 1x/month. this first happened a few years ago.

Defect investigations

NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.

• Desiccated Air Bag Inflator Rupture

  EA21002Opened Sep 17, 2021Open
  From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…

  From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11009654The SKYACTIV-DRIVE FW6A-EL AT uses Automatic Transmission Fluid (ATF) Type: FZ. Only use ATF-FZ to fill or top off the fluid level. ATF-FZ is specially designed for use in the SKYACTIV-DRIVE series AT. It is a low viscosity formula with less friction for better fuel economy. NOTE: ATF-FZ is colored blue for easy identification.
• 11009644Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
• 11007029For improvement of electrical diagnosis, the SKYACTIV Wiring Terminal Test Kits has been delivered all the dealers. The terminal test kit enables you: To check pin fit drag of all PCM terminals used in SKYACTIV vehicles and compare suspect terminal drag with a known good terminal. To measure the voltage/resistance avoiding any terminal damage.
• 11007022Some vehicles may experience exterior trim heat damage such (melted, separating, etc.) when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
• 11007019If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
• 11007010Some customer's might state that they notice fluid or oil leaking/dripping on the ground when the vehicle is parked. For this concern, inspect the vehicle for any trace of a fluid or oil leak and use the following examples as a guide to determine if it is severe enough to require a repair, or just to clean the area and monitor it at the next service.
• 11007009Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
• 11006987In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealers responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the Speedometer Replacement Label. Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazdas vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMOs services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
• 11005671Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
• 11003398Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
• 11003397Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains or discoloration.
• 11003396Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
• 10254191Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains or discoloration.
• 10252508Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
• 10251387Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
• 10244679If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
• 10243569Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
• 10243568Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
• 10240496Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
• 10238695Some customers may complain of a lack of power under heavy load without any warning lights or DTCs. This concern may be due to a loose or detached hood weatherstrip, which can cause a blockage or restriction in the air intake system.
• 10237216If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
• 10237215Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains or discoloration.
• 10237199Some vehicles may experience the check engine light and automatic transaxle warning light ON with one or more of these DTCs stored in the TCM memory (P0842, P0847, P0872, P0877, P0780, P1738).
• 10232299Speedometer replacement procedure
• 10230875Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
• 10230865When servicing SKYACTIV engine vehicles requiring to replace the Oil Galley Plug and Crush Washer, order the required part numbers below. These parts are not listed in GEPC and were previously listed as "non-serviceable" in the cylinder block diagram.
• 10228657Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
• 10228648Some vehicles may experience the Check Engine Light ON with DTC P0171 (Fuel Trim too Lean) and possibly DTCs P030X (Misfire). Vehicles having this concern should use the following Inspection/Repair procedure.
• 10226924If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices. Examples: 1. Devices connected to the DLC-2 (battery discharge/DTC stored) 2. Cell phone charger/accessory in 12V socket (engine no start or unable to turn off) 3. GPS tracking device (engine no start/battery discharge) 4. Dash cam (DTC stored) 5. Non-certified USB cable (Apple Carplay/ Android Auto will not connect) 6. Over-sized wheels/tires (incorrect GPS location)
• 10226814Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines below to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal.
• 10225767The new SKYACTIV-DRIVE FW6A-EL AT uses "Automatic Transmission Fluid (ATF) Type: FZ". Only use "ATF-FZ" to fill or top off the fluid level. ATF-FZ is specially designed for use in the SKYACTIV-DRIVE series AT. It is a low viscosity formula with less friction for better fuel economy. NOTE: ATF-FZ is colored blue for easy identification.
• 10225724Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
• 10217209In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer.
• 10215274This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.
• 10215238Service part Automatic Transaxles (ATX) manufactured on or after July, 2018 are shipped with a blank TCM that requires configuration.
• 10213430Excessive condensation or water within the headlamp assembly caustion
• 10213429Paint damage Mazda pocket paint guide
• 10213427HandsFree bluetooth module and/or text messaging troubleshooting procedure
• 10213425Speedometer replacement procedure
• 10213423Siriusxm satellite radio registration transfer after unit replacement

Every Mazda MAZDA3 model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.