2020 Mazda MAZDA3
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mazda › MAZDA3 › 2020
These records cover every 2020 Mazda MAZDA3. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
2 recalls name the 2020 Mazda MAZDA3. Newest first.
Mazda North American Operations (Mazda) is recalling certain 2020 CX-30 and Mazda3 vehicles. The front brake caliper mounting bolts may not have been tightened properly during assembly, possibly allowing the calipers to loosen.
Risk and remedy
Risk
Loose brake calipers can reduce braking performance or interfere with wheel rotation, affecting vehicle handling. Either of these scenarios can increase the risk of a crash.
Remedy
Mazda will notify owners, and dealers will inspect the front brake caliper bolts, tightening them as necessary. If bolts are missing, the affected brake caliper will be replaced. Repairs will be performed free of charge. The recall began July 24, 2020. Owners may contact Mazda customer service at 1-800-222-5500, Option 4. Mazda's number for this recall is 4420F.
Mazda North American Operations (Mazda) is recalling certain 2019-2020 Mazda3 vehicles. The Smart Brake System (SBS) can falsely detect an obstacle while driving, activating the automatic emergency braking system and suddenly stopping the vehicle.
Risk and remedy
Risk
Stopping the vehicle unexpectedly increases the risk of a crash.
Remedy
Mazda will notify owners, and dealers will update the SBS software. In addition, vehicles with certain production dates will receive an instrument cluster software update or replacement and a replacement owner's manual. These repairs will be performed free of charge. The recall began February 14, 2020. Owners may contact Mazda customer service at 1-800-222-5500, Option 4. Mazda's number for this recall is 4219L.
Owner complaints
32 complaints
What owners report most
Latest complaints
- Fuel/propulsion system
Low pressure fuel pump failure with 75,575 miles on odometer. Fuel pump completely seized. Car was parked at a retail location and would not start. Upon troubleshooting, mechanic was able to determine the low pressure pump was not delivering fuel. Pump was replaced. Faulty fuel pumps could…
Low pressure fuel pump failure with 75,575 miles on odometer. Fuel pump completely seized. Car was parked at a retail location and would not start. Upon troubleshooting, mechanic was able to determine the low pressure pump was not delivering fuel. Pump was replaced. Faulty fuel pumps could lead to hazardous conditions as they are mounted within the fuel tank. I feel this is too early in the vehicles life for this component to have completely failed.
- Tires › Sidewall
size 21545ZR18 93Y. replaced these oem tires with these from costco on feb 27 2025. in dec 5 2025 the tire developed a large bubble. miles bought was 27790. current miles 31212. per tire center steal belting was broken no signs of road hazard or other damage. the belt broke and rubber was…
size 21545ZR18 93Y. replaced these oem tires with these from costco on feb 27 2025. in dec 5 2025 the tire developed a large bubble. miles bought was 27790. current miles 31212. per tire center steal belting was broken no signs of road hazard or other damage. the belt broke and rubber was stressed with " maybe a 1000 miles regaining before catastrophic failure." wear instrument showed they were literally showing new tires. states they were the 3rd michellin tires with dude wall bubbling that week. states could have caused severe accident. no warnings damage leaks or idicators. all maintenance and pressure follwed per manufacturing specs. tires are a danger to drivers even low miles to failure to cause accident.
- Power train
My Mazda3 began producing a chirp when shifting from 3rd to 4th gear (automatic transmission). The dealer stated that the car needed a new torque converter. At the time the car only 37,000 miles on it, quite low mileage for a torque converter to fail. Mazda has previously admitted to producing cars…
My Mazda3 began producing a chirp when shifting from 3rd to 4th gear (automatic transmission). The dealer stated that the car needed a new torque converter. At the time the car only 37,000 miles on it, quite low mileage for a torque converter to fail. Mazda has previously admitted to producing cars with faulty torque converters, as specified in Mazda TXXXXXX] ). While my car fit the description of both the problem and proposed fix, and also fell within the applicable models/VINs listed on the TSB, Mazda corporate HQ stated that my specific VIN was not covered by the TSB, and therefore the repair cost was my responsibility. Since the problem, solution, and general vehicle type are entirely as described in the TSB, it appears possible that the TSB was too narrowly scoped and omitted impacted vehicles, to the detriment of owners. This would also cause potential safety concerns, since an unrepaired torque converter could produce unexpected shifting problems. Therefore I suggest that NHTSA investigate to determine if additional vehicles are impacted by Mazda's faulty torque converters. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Suspension
I pulled into the driveway (at about 5 mph) of my passenger's home, when a very loud, metallic pop occurred somewhere inside my vehicle. I could not discern the problem by visually inspecting the car. Upon returning to my home, I arranged for the dealership to inspect the car's suspension. They…
I pulled into the driveway (at about 5 mph) of my passenger's home, when a very loud, metallic pop occurred somewhere inside my vehicle. I could not discern the problem by visually inspecting the car. Upon returning to my home, I arranged for the dealership to inspect the car's suspension. They found that both rear springs had snapped off from their lower vehicle attachment points. At the time of the incident, my car was less than 6 years old and had approximately 62500 total miles. I had the dealership replace both rear springs and associated attachment hardware. Prior to this failure, the dealership had routinely inspected the suspension of my vehicle as part of PA annual inspections. I experienced NO warning symptoms prior to the suspension failure.
- Steering · Suspension
TSB 02-003/24 Car front suspension bolts corroded and making metal on metal sounds during turning and braking
- Equipment › Other › Labels
See attached document for complaint.
- Seat belts
Passenger seat belt won’t retract and remains in a locked state.
- Electrical system · Exterior lighting · Lane departure › Warning
Google search shows Mazda has common problem with their front sensing camera, people are reporting the issue for different Mazda models across the board for the last few years including newer models as well. My car display shows few malfunction warning messages. Following captured from MyMazda…
Google search shows Mazda has common problem with their front sensing camera, people are reporting the issue for different Mazda models across the board for the last few years including newer models as well. My car display shows few malfunction warning messages. Following captured from MyMazda app. 1. Forward sensing camera malfunction. i-ACTIVESENSE advanced safety and driver support systems may not operate correctly. 2. High Beam Control System is disabled. Automatic switching between high and low beams is unavailable.
- Forward collision avoidance › Automatic emergency braking
While driving on a residential street the automatic emergency braking system activated and brought the car to a very abrupt stop but there was nothing in the front of the car to activate the system. There were no cars in the on-coming lane and no cars in the lane beside my car. When the car stopped…
While driving on a residential street the automatic emergency braking system activated and brought the car to a very abrupt stop but there was nothing in the front of the car to activate the system. There were no cars in the on-coming lane and no cars in the lane beside my car. When the car stopped the Brake warning appeared in the windshield and a warning tone sounded. It was in the early evening and it was raining. Fortunately there were no cars behind me so there were no injuries. I took the car to the Mazda dealership and upon inspection they noted that the radar system associated with the automatic emergency braking system was malfunctioning and not correctly calculating the distance between the car and other objects. They are in the process of replacing the radar. If this had happened on the highway at higher speeds or if there had been a car behind me I would have been injured.
- Forward collision avoidance › Automatic emergency braking · Forward collision avoidance › Warnings · Service brakes
My car's automatic emergency brake is deploying without warning, during driving, when there are no other cars in my forward proximity. I took it to the dealership to have it fixed, and on the drive home, it did it again. There is a recall for similar makes and models for this year, but my car has not been included.
- Unknown or other · Visibility/wiper
in May 2023 the visors of the vehicle hinge melted causing the visors to hang down to eye level and would not hold up causing visibly issues for driver and passenger. dealer said it is a common issue in heat but it blocks forward visibility and won't hold up and if there were and accident, forward movement of passenger or driver can cause the head to hit the visor causing injury.
- Forward collision avoidance › Automatic emergency braking · Forward collision avoidance › Warnings
on 3 occasions may 2023, June 2023 and July 2023 the forward Collison camera activated. in May and June it showed the vehicle to near stop like radar cruise control in rush hour speed traffic. in July 2023 it sounded the alarm and came to a full stop in heavy traffic. it occurs on bright hot…
on 3 occasions may 2023, June 2023 and July 2023 the forward Collison camera activated. in May and June it showed the vehicle to near stop like radar cruise control in rush hour speed traffic. in July 2023 it sounded the alarm and came to a full stop in heavy traffic. it occurs on bright hot days going straight no turns no oncoming traffic no traffic around and no obstacles hold or dips. this can cause the car to stop immediately and cause an accident. App detects problem with system but dealer cannot find problem and blame camera or GPS or satellite radio factory equipped.
- Forward collision avoidance › Automatic emergency braking · Forward collision avoidance › Warnings · Unknown or other
I was driving down 2nd Avenue in Manhattan, traffic was crowded but flowing with an estimated speed of 20mph between lights. I believe the distance between my front bumper and the car ahead was only slightly under 2 car lengths in motion. Coming to a stop light, the car in front of me slowed and I…
I was driving down 2nd Avenue in Manhattan, traffic was crowded but flowing with an estimated speed of 20mph between lights. I believe the distance between my front bumper and the car ahead was only slightly under 2 car lengths in motion. Coming to a stop light, the car in front of me slowed and I followed, applying pressure to the brake gradually. Roughly 2-3 seconds into my braking, the forward collision warning activated (fast beep) followed by a hard brake causing myself and one passenger to lurch forward. The car behind me managed to hard brake before hitting me by a very small margin. As my car came to a near stop the space in front opened to several car lengths, that is a continuous application of gradual braking would have been totally sufficient to stop. Weather conditions were good. A similar situation had occurred to me before on the highway (unnecessary forward collision warning, but thankfully no auto brake) and so after this I decided to check the front for any obstruction of sensors and could not find any. I have heard from at least one other owner of a similar model Mazda that they have experienced the same during city/Manhattan driving.
- Lane departure › Assist · Lane departure › Warning · Steering
Lane departure warning activated and attempted to correct during a gentle curve. The location had shifted lanes due to construction, so clear lines were visible but not the actual lane to follow which is a frequent occurrence in New York City. The system came close to steering me into the adjacent…
Lane departure warning activated and attempted to correct during a gentle curve. The location had shifted lanes due to construction, so clear lines were visible but not the actual lane to follow which is a frequent occurrence in New York City. The system came close to steering me into the adjacent lane occupied by another vehicle forcing me to fight the correction. There was a lane departure warning on the dash and I believe the blind spot indicator was on (i.e. the adjacent vehicle was detected in some capacity). I considered this especially dangerous as in this zone also had very tight lanes so my physical correction could have also caused an accident. There was no malfunction of the physical components. No dealer or service center has reproduced the issue however I have discussed with other drivers of the same line (2020-23 Mazdas) who have had similar experiences leading to a decision to disable these "safety" features. Mazda provides a reasonable description of scenarios where lane departure and assistance will disable itself due to poor conditions or low confidence. I would recommend at a minimum requiring the system to detect and potentially differentiate lane widths, as city driving sometimes has extremely tight lanes (for example, the inner roadway of the Williamsburg Bridge where two adjacent lanes are perhaps 8-9ft with less than 2ft on either side to the wall). In these scenarios, any steering correction at all is more dangerous than if it were off.
- Electrical system
Automatic safety notification censoring system for the brakes engaged when a stop was not applicable or necessary causing the car to brake on its own in traffic. Luckily no one else was on the road.
- Forward collision avoidance › Automatic emergency braking
•The first incident I had with the SBS was about a month on the highway, I was approaching a vehicle that was braking due to upcoming traffic. I had plenty of time to stop, upwards of 8-10 car lengths. Yet my SBS kicked in and slammed the brakes, jarring me forward. Luckily no one was directly…
•The first incident I had with the SBS was about a month on the highway, I was approaching a vehicle that was braking due to upcoming traffic. I had plenty of time to stop, upwards of 8-10 car lengths. Yet my SBS kicked in and slammed the brakes, jarring me forward. Luckily no one was directly behind me at that time because I have no doubt it would have caused an accident. At that time, it was the only time it had occurred, so I wrote it off as the sensor being a bit too sensitive. •The second incident I have had was recent, 11/23. I was pulling into a parking spot at work, that has a concrete wall to section off parking spots. I was low speed, turned into the spot and the SBS activated, slamming the brakes, resulting in me being propelled into my steering wheel. I was roughly 5-6 feet away from the wall
- Fuel/propulsion system
Fuel pump, car dying out, can't turn off brake release from when it dies. Shaking when accelerating. Fuel gas issue.
- Forward collision avoidance › Warnings
I was traveling 25mph with no obstruction in front of me, when the collision warning sounded. The braking system did not activate. No collision was imminent.
- Forward collision avoidance › Automatic emergency braking · Forward collision avoidance › Warnings
I was traveling approximately 5 mph with approximately 15 feet from the car in front of me, maintaining a constant following distance. The collision warning sounded, followed by emergency braking within 1 second. No collision was imminent.
- Forward collision avoidance › Automatic emergency braking
Was letting car slow down for red light. No cars in front of me. Suddenly the car braked and the brake warning came on. I was pretty far back from the light. I took the car to the dealer and he said the occurrence did not show on the computer. There was a recall for this problem but not for my car.…
Was letting car slow down for red light. No cars in front of me. Suddenly the car braked and the brake warning came on. I was pretty far back from the light. I took the car to the dealer and he said the occurrence did not show on the computer. There was a recall for this problem but not for my car. If someone had been behind me or if this happens on a busy street, I would be rear ended. There have been other computer problems with this car but they never happen when the dealer checks for them.
- Electrical system · Engine
El vehiculo tiene problemas de encendido, despues de estar en reposo dos dias no enciende SE tiene que pasar corriente, inclusive en manejos cortos al volver a encender el vehiculo presenta el mismo problema, este ES un problema en la mayoria de este tipo de vehiculos, mismos que son encontrados muchos comentarios en internet, el vehiculo esta en la cdmx mexico.
- Forward collision avoidance › Automatic emergency braking · Forward collision avoidance › Warnings
While driving the vehicle decided to suddenly brake ....... thinking it was dangerous ..... lucky no one was behind me ..... that was really scarry and could have caused an accident for no reason.
- Service brakes, hydraulic
The contact owns a 2020 Mazda Mazda3. The contact stated while driving 35 MPH, the ABS warning light illuminated, and the brakes locked up and caused the vehicle to stall. The contact was able to restart the vehicle however, the failure persisted. The contact had taken the vehicle to a local dealer…
The contact owns a 2020 Mazda Mazda3. The contact stated while driving 35 MPH, the ABS warning light illuminated, and the brakes locked up and caused the vehicle to stall. The contact was able to restart the vehicle however, the failure persisted. The contact had taken the vehicle to a local dealer to be diagnosed however, the dealer was not able to duplicate the failure. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 2,000.
- Forward collision avoidance › Automatic emergency braking · Forward collision avoidance › Warnings
I was on the Queensboro Bridge headed from Queens, NY into Manhattan on the afternoon of August 29. Weather was partly cloudy and dry conditions. Traffic was bumper to bumper and moving anywhere from 0mph to maybe 5mph. I was in the middle of the bridge driving approximately 5mph and my 2020…
I was on the Queensboro Bridge headed from Queens, NY into Manhattan on the afternoon of August 29. Weather was partly cloudy and dry conditions. Traffic was bumper to bumper and moving anywhere from 0mph to maybe 5mph. I was in the middle of the bridge driving approximately 5mph and my 2020 Mazda 3 beeped (collision warning) and applied brakes. I was almost rear ended and my two passengers were jolted forward. I maintained a safe following distance the entire time. I believe a van on my left triggered my car’s actions as it passed. I was in no danger of getting into an accident although I was quite shaken up since this is the first time my car applied its brakes. I have an appointment to bring my car in and would like the automatic braking system disabled. Previously, the car from time to time has alerted of a collision always under 40mph and a previous inspection of my vehicle (after I reported collision warning activation) revealed everything was working properly.
- Forward collision avoidance › Adaptive cruise control · Forward collision avoidance › Automatic emergency braking
The Mazda Radar Cruise Control (MRCC) system performs poorly (it does not hold a set speed well up and down hill; compared to our 2006 Mazda3), but the safety concern is the forceful, sudden, and not-always-predictable braking the vehicle does even if there is not another vehicle in front of us. It…
The Mazda Radar Cruise Control (MRCC) system performs poorly (it does not hold a set speed well up and down hill; compared to our 2006 Mazda3), but the safety concern is the forceful, sudden, and not-always-predictable braking the vehicle does even if there is not another vehicle in front of us. It brakes, sometimes, for a vehicle in the right lane (we, in the left), and continues to brake unless we override the system. No problem--except if there may be someone following too closely, it could cause a collision. It seems to be related to the MRCC, as no "Brake!" warning accompanies the unwanted brake application. I've contacted Mazda numerous times; they recommended taking it to the dealer. I have--they can find nothing wrong. All of this seems related to a MRCC update (SSP C5) that was done to smooth the MRCC's operation. It did fix the sudden deceleration and acceleration when following other vehicles, but now is worse in other aspects. I may be wrong, but it all seems to be a software issue, so it's not surprising that the dealer can find "no concerns". As to the date of this incident, it happens nearly every time we take the car on a highway or interstate.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11011345CUSTOMER SERVICE PROGRAM CSP12 - DENSO LOW-PRESSURE FUEL PUMP CUSTOMER SERVICE PROGRAM WARRANTY EXTENSION: Attention ALL Mazda Dealers: This is a Warranty Extension and not a recall campaign. Repairs are not to be made unless there is a confirmed low-pressure fuel pump failure within the coverage period. As of November 18, 2024 Repair Procedures and Parts and Warranty documents are available.
- 11011341CUSTOMER SERVICE PROGRAM CSP12 - DENSO LOW-PRESSURE FUEL PUMP CUSTOMER SERVICE PROGRAM WARRANTY EXTENSION: Attention ALL Mazda Dealers: This is a Warranty Extension and not a recall campaign. Repairs are not to be made unless there is a confirmed low-pressure fuel pump failure within the coverage period. As of November 18, 2024 Repair Procedures and Parts and Warranty documents are available.
- 11011338CUSTOMER SERVICE PROGRAM CSP12 - DENSO LOW-PRESSURE FUEL PUMP CUSTOMER SERVICE PROGRAM WARRANTY EXTENSION: Attention ALL Mazda Dealers: This is a Warranty Extension and not a recall campaign. Repairs are not to be made unless there is a confirmed low-pressure fuel pump failure within the coverage period. As of November 18, 2024 Repair Procedures and Parts and Warranty documents are available.
- 11011336CUSTOMER SERVICE PROGRAM CSP12 - DENSO LOW-PRESSURE FUEL PUMP CUSTOMER SERVICE PROGRAM WARRANTY EXTENSION: Attention ALL Mazda Dealers: This is a Warranty Extension and not a recall campaign. Repairs are not to be made unless there is a confirmed low-pressure fuel pump failure within the coverage period. As of November 18, 2024 Repair Procedures and Parts and Warranty documents are available.
- 11011331CUSTOMER SERVICE PROGRAM CSP12 - DENSO LOW-PRESSURE FUEL PUMP CUSTOMER SERVICE PROGRAM WARRANTY EXTENSION: Attention ALL Mazda Dealers: This is a Warranty Extension and not a recall campaign. Repairs are not to be made unless there is a confirmed low-pressure fuel pump failure within the coverage period. As of November 18, 2024 Repair Procedures and Parts and Warranty documents are available.
- 11011326CUSTOMER SERVICE PROGRAM CSP12 - DENSO LOW-PRESSURE FUEL PUMP CUSTOMER SERVICE PROGRAM WARRANTY EXTENSION: Attention ALL Mazda Dealers: This is a Warranty Extension and not a recall campaign. Repairs are not to be made unless there is a confirmed low-pressure fuel pump failure within the coverage period. As of November 18, 2024 Repair Procedures and Parts and Warranty documents are available.
- 11011141Some customers may report concerns with interior upholstery surface stains particularly on high contact areas (e.g.: seats, steering wheel, door panels, shifter...etc.). This may be caused by skin oils or chemicals such as hand lotions.
- 11011140When the Telematics Control Unit (TCU) replacement is necessary due to a failure, use MDARS to activate the new TCU after replacement. Use the information in this service alert to initialize the new TCU until the procedure on MGSS is updated.
- 11011139A customer may complain of a rattle noise from the right side of the dash. The noise may be coming from the passenger side airbag.
- 11011138Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF Climate Control 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or "\".
- 11011137On certain subject vehicles, the check engine light is illuminated with diagnostic trouble code (DTC) P0126, due to the fail-safe thermostat being stuck open. Additionally, you may notice one or more of the following symptoms: -Engine takes longer to warm up. -Engine temperature gauge fluctuates. -Low coolant temperature indicator (blue) light stays on longer or turns on while driving. -Poor heater performance, especially at idle. This warranty extension program applies only to the replacement of fail-safe thermostat of the vehicle exhibiting the concerns mentioned above. If the check engine light illumination is determined to be unrelated to the fail-safe thermostat being stuck open, the inspection and repair are not covered under this program.
- 11011133Some customers may experience a check engine light ON with DTC P0126:00 (Thermostat stuck open) and one or more of the following symptoms: Engine takes longer to warm up. Engine temperature gauge fluctuates. Low coolant temperature indicator (blue) light stays on longer or turns on while driving. Poor heater performance, especially at idle.
- 11010992Some customers may experience rear subwoofer audio sound pauses intermittently at high volume levels. When the volume level is lowered, the subwoofer audio sound resumes. The actual volume level may vary depending on the audio source. If the audio source consists of many low frequency (40 - 70 Hz) sounds, the concern may occur at volume level 35 or higher. This concern may be caused by improper audio amplifier control software. To eliminate this concern, the control software has been modified.
- 11009665Mazda Motor Corporation has decided to conduct a Special Service Program (SSP) to extend the warranty coverage for a specific repair of the fail-safe thermostat in the coolant control valve on certain CX-5, Mazda3, CX-3, Mazda6 and CX-30 vehicles that are equipped with the suspected coolant control valve. The warranty coverage for a specific repair of fail-safe thermostat has been extended to 15 years (180 months) /150,000 miles (240,000 km) whichever comes first, from the original warranty start date. Concern Outline: On certain subject vehicles, the check engine light is illuminated with DTC P0126:00 (Thermostat stuck open) stored in memory and one or more of the following symptoms may occur: Engine takes longer to warm up, Engine temperature gauge fluctuates, Low coolant temperature indicator (blue) light stays on longer or turns on while driving, Poor heater performance, especially at idle. This is a warranty extension for the specified repair only. Inspection and replacement of non-failed parts will not be eligible for reimbursement under this SSP to the dealer or customer. This program extends the warranty period for actual failures due to defects in workmanship or materials in accordance with the Mazda Warranty Policy and Procedures. If a customer arrives at your dealership with the concern described, please repair under this Special Service Program.
- 11009664Mazda Motor Corporation has decided to conduct a Special Service Program (SSP) to extend the warranty coverage for a specific repair of the fail-safe thermostat in the coolant control valve on certain CX-5, Mazda3, CX-3, Mazda6 and CX-30 vehicles that are equipped with the suspected coolant control valve. The warranty coverage for a specific repair of fail-safe thermostat has been extended to 15 years (180 months) /150,000 miles (240,000 km) whichever comes first, from the original warranty start date. Concern Outline: On certain subject vehicles, the check engine light is illuminated with DTC P0126:00 (Thermostat stuck open) stored in memory and one or more of the following symptoms may occur: Engine takes longer to warm up, Engine temperature gauge fluctuates, Low coolant temperature indicator (blue) light stays on longer or turns on while driving, Poor heater performance, especially at idle. This is a warranty extension for the specified repair only. Inspection and replacement of non-failed parts will not be eligible for reimbursement under this SSP to the dealer or customer. This program extends the warranty period for actual failures due to defects in workmanship or materials in accordance with the Mazda Warranty Policy and Procedures. If a customer arrives at your dealership with the concern described, please repair under this Special Service Program.
- 11009654The SKYACTIV-DRIVE FW6A-EL AT uses Automatic Transmission Fluid (ATF) Type: FZ. Only use ATF-FZ to fill or top off the fluid level. ATF-FZ is specially designed for use in the SKYACTIV-DRIVE series AT. It is a low viscosity formula with less friction for better fuel economy. NOTE: ATF-FZ is colored blue for easy identification.
- 11009647A new cylinder head assembly for service parts has been newly established for SKYACTIV-G 2.5 with cylinder deactivation when replacement is needed. Valves, valve springs, valve spring seats, and cotters (IN/EX) are included in the new assembly. Hotline and MASH authorization is not required to order parts for performing this repair. If there are any questions on part ordering or part status, contact the Dealer Assistance Group.
- 11009644Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
- 11009636Some vehicles may exhibit a rear console lid with a sticking feeling or a squeaking noise when opening and/or closing. This is caused by an inappropriate shape of the console lid hinge pin where the position of the hinge pin (1) becomes misaligned when the rear console lid is repeatedly opened and closed. When parts around the hinge pin thermally expand, the result creates a gap in the hinge of the rear console lid.
- 11009635Some customers may complain that the rear console lid does not slide smoothly. This may be caused by improperly positioned felt pads attached to the rear console lid lock, which may have moved out of position after repetitive use. The exposed adhesive residue may stick to the rail and disrupt smooth sliding operation.
- 11008580Mazda Connect Services - Frequently Asked Questions (FAQ)
- 11008579Mazda Connect Services - Frequently Asked Questions (FAQ)
- 11008578When the Telematics Control Unit (TCU) replacement is necessary due to a failure, use MDARS to activate the new TCU after replacement. Use the information in this service alert to initialize the new TCU until the procedure on MGSS is updated.
- 11008577Some customers may complain about scratches on the instrument cluster lens.
- 11008576Qi Wireless Charger symptom troubleshooting.
- 11008575Some customers may complain about the Active Driving Display not displaying turn by turn (TBT) travel direction or navigation information.
- 11008574Some customers may experience a Connected Vehicle failure. The MyMazda App may display an Error Code. This document provides Error Code description and recovery information to assist with repairs.
- 11008573Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF Climate Control
- 11008571Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
- 11008430This information will give you the necessary knowledge to respond to customers concerns of Smart Brake Support (SBS) unintended braking. By educating the customer on the system operation, it should reduce their anxiety or distrust of the vehicle.
- 11008429Symptom 1: Some customers may complain about hearing a grinding noise and/or vibration occur when applying the brake. This is due to rust on the rear brake disc plate. The brake pad has insufficient disc-rust prevention performance, resulting in the disc plate rusting. To eliminate this concern, the pad material has been improved to prevent rust on the disc surface. Symptom 2: Some vehicles may exhibit a squeal noise from the rear brakes when braking lightly while driving at a slow speed. The squeal noise is caused by the disc pad surface fluctuating. To eliminate this concern, the brake pads have been modified.
- 11008423The Blind Spot Monitoring (BSM) system can malfunction with the following symptoms if the rear side radar sensors are installed facing the wrong direction. BSM system indicates vehicle on the opposite side. i-ACTIVSENSE indicator ring will not turn green Rear Cross Traffic Alert (RCTA) does not work Rear side radar sensor aiming may fail TPMS DTC(s) stored
- 11007029For improvement of electrical diagnosis, the SKYACTIV Wiring Terminal Test Kits has been delivered all the dealers. The terminal test kit enables you: To check pin fit drag of all PCM terminals used in SKYACTIV vehicles and compare suspect terminal drag with a known good terminal. To measure the voltage/resistance avoiding any terminal damage.
- 11007024Some customers will report that their fuel door was stuck closed and would not open to refuel the vehicle. Follow the repair steps below unless the conditions outlined in TSB 09-019/21 - FUEL-FILLER LID PANEL IS DEFORMED for 2019-2021 Mazda3 and 2020-2021 CX-30 are present.
- 11007022Some vehicles may experience exterior trim heat damage such (melted, separating, etc.) when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 11007019If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
- 11007018Interior parts made of resin have antistatic coating to prevent dust from sticking on the surfaces, and depending on the conditions of use, the antistatic components may crystallize slightly, giving an appearance of white stains on the surface. To remove the stains, wipe the stained surface with a towel soaked with water mixed with a small portion of a neutral detergent. If the white stains reappear again, simply wipe them again in the same way.
- 11007013Auxiliary key blank cutting procedure. There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method B. Auxiliary Key Code Cut Method
- 11007010Some customer's might state that they notice fluid or oil leaking/dripping on the ground when the vehicle is parked. For this concern, inspect the vehicle for any trace of a fluid or oil leak and use the following examples as a guide to determine if it is severe enough to require a repair, or just to clean the area and monitor it at the next service.
- 11007009Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
Every Mazda MAZDA3 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.