2019 Mazda MAZDA3
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mazda › MAZDA3 › 2019
These records cover every 2019 Mazda MAZDA3. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
6 recalls name the 2019 Mazda MAZDA3. Newest first.
Mazda North American Operations (Mazda) is recalling certain 2019-2020 Mazda3 vehicles. The Smart Brake System (SBS) can falsely detect an obstacle while driving, activating the automatic emergency braking system and suddenly stopping the vehicle.
Risk and remedy
Risk
Stopping the vehicle unexpectedly increases the risk of a crash.
Remedy
Mazda will notify owners, and dealers will update the SBS software. In addition, vehicles with certain production dates will receive an instrument cluster software update or replacement and a replacement owner's manual. These repairs will be performed free of charge. The recall began February 14, 2020. Owners may contact Mazda customer service at 1-800-222-5500, Option 4. Mazda's number for this recall is 4219L.
Mazda North American Operations (Mazda) is recalling certain 2019 Mazda3 vehicles equipped with manual dimming mirrors. The adhesive between the interior rearview mirror and the housing may not be properly bonded, allowing the mirror to detach from the housing. Note: Vehicles equipped with auto dimming mirrors are not affected by this recall.
Risk and remedy
Risk
Rearward visibility will be reduced without the rearview mirror, increasing the risk of a crash.
Remedy
Mazda will notify owners, and dealers will replace the interior rearview mirror assembly, free of charge. The recall began September 19, 2019. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 3919G.
Mazda North American Operations (Mazda) is recalling certain 2019 Mazda3 vehicles. The seat cover material on both front seats may interfere with the head restraint lock release button, causing it to stick in the release position and not allow the head restraint to lock into place.
Risk and remedy
Risk
Loose head restraints may increase the risk of injury in the event of a crash.
Remedy
Mazda will notify owners, and dealers will install spacers at the bottom of the lock release buttons on both front seat head restraints, free of charge. The recall began August 20, 2019. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 3819F.
Mazda North American Operations (Mazda) is recalling certain 2018-2019 CX-5, Mazda6, and 2019 Mazda3 vehicles. A software error in the powertrain control module (PCM) may cause the engine to stall.
Risk and remedy
Risk
An unexpected stall increases the risk of a crash.
Remedy
Mazda will notify owners, and dealers will reprogram the PCM software, free of charge. The recall began August 20, 2019. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 3719F.
Mazda North American Operations (Mazda) is recalling certain 2019 Mazda3 vehicles. The lug nuts on all four wheels may loosen, potentially resulting in a wheel detaching from the vehicle.
Risk and remedy
Risk
A wheel separating from the vehicle increases the risk of a crash.
Remedy
Mazda will notify owners, and dealers will tighten the front and rear wheel lug nuts to the correct specification, free of charge. The recall began July 9, 2019. Owners may contact Mazda customer service at 1-800-222-5500, Option 4. Mazda's number for this recall is 3519F.
Mazda North American Operations (Mazda) is recalling certain 2019 Mazda3 vehicles. Due to incorrect programing, the passenger air bag deactivation indicator light may erroneously turn off although the passenger air bag is deactivated. In addition, the seat belt status indicators for both the front passenger seat and/or rear seats may erroneously turn off…
Risk and remedy
Risk
Incorrect indicator warning lights may lead the driver and/or passengers to be unaware of deactivated air bags or unfastened seat belts, increasing the risk of injury.
Remedy
Mazda will notify owners, and dealers will replace the passenger air bag/seat belt status indicator assembly, free of charge. The recall began July 9, 2019. Owners may contact Mazda customer service at 1-800-222-5500, Option 4. Mazda's number for this recall is 3319E.
Owner complaints
74 complaints3 involved a crash1 injuries
What owners report most
Latest complaints
- Seat belts
Driver’s side seat belt would not retract.
- Visibility/wiper
The driver-side sun visor has suffered an internal mechanical failure where the internal plastic tension components have cracked under normal use. As a direct result, the sun visor will not stay up and randomly drops down completely unprompted while the vehicle is in motion. This creates an…
The driver-side sun visor has suffered an internal mechanical failure where the internal plastic tension components have cracked under normal use. As a direct result, the sun visor will not stay up and randomly drops down completely unprompted while the vehicle is in motion. This creates an immediate, sudden, and dangerous visibility hazard by blocking my forward view of the road while driving.Mazda has formally recognized this specific engineering defect across 2019–2025 Mazda 3 vehicles in Technical Service Bulletin (TSB) MC-11016209-0001, explicitly stating that the internal stay components crack. However, because Mazda has only issued a TSB and not a safety recall, out-of-warranty owners are forced to pay out-of-pocket to repair a component critical to safe driving visibility. This issue needs to be escalated to a formal safety recall before it causes an accident due to forward view obstruction.
- Air bags
1. What component or system failed or malfunctioned, and is it available for inspection upon request? The airbag system, specifically the curtain airbags and related airbag control components, malfunctioned by deploying spontaneously without any collision or impact. The vehicle and deployed airbags…
1. What component or system failed or malfunctioned, and is it available for inspection upon request? The airbag system, specifically the curtain airbags and related airbag control components, malfunctioned by deploying spontaneously without any collision or impact. The vehicle and deployed airbags are still available and can be inspected upon request. 2. How was your safety or the safety of others put at risk? The spontaneous deployment of all four curtain airbags created an immediate safety hazard. Airbag deployment can cause injury, disorientation, or loss of control, especially if it occurs unexpectedly. Although the vehicle was stationary at the time, deployment without warning posed a serious risk of injury to occupants and could have resulted in a crash if it had occurred while driving. 3. Has the problem been reproduced or confirmed by a dealer or independent service center? The problem has not been reproduced, as the airbags have already deployed. However, the spontaneous deployment itself is clear evidence of a malfunction. The issue has not been resolved or repaired, and responsibility for repair has not been accepted. 4. Has the vehicle or component been inspected by the manufacturer, police, insurance representatives, or others? The incident was reported to Progressive Insurance, which denied coverage because there was no accident or collision. The vehicle has not yet been inspected by the manufacturer for defect analysis. No police inspection occurred because there was no crash or injury. 5. Were there any warning lamps, messages, or other symptoms of the problem prior to the failure, and when did they first appear? Yes. The airbag warning light was illuminated prior to the incident, indicating a potential system fault. Additionally, a strong chemical odor was noticed inside the vehicle immediately before deployment, originating from the front passenger side, moments before all four curtain airbags deployed.
- Unknown or other
Driver side door handle failed. Cannot enter or exit through driver side door. If something were to happen that we need to get out in an emergency situation we cannot exit through the driver side door. No damage occurred. Just stopped working
- Forward collision avoidance › Automatic emergency braking · Forward collision avoidance › Warnings · Service brakes
To whom it may concern, I was on a back road late in the evening not far from home [XXX] and a small deer ran into the road. I needed to brake to avoid hitting the deer. After breaking, a Brake System Malfunction warning message and i-ACTIVESENSE System Malfunction warning illuminated on my…
To whom it may concern, I was on a back road late in the evening not far from home [XXX] and a small deer ran into the road. I needed to brake to avoid hitting the deer. After breaking, a Brake System Malfunction warning message and i-ACTIVESENSE System Malfunction warning illuminated on my dashboard. I brought the car to a Mazda dealership the next morning. The technician determined that the brake fluid level sensor became stuck, requiring replacement of the brake fluid reservoir and the brake fluid level sensor. What failed: The repairs include replacement of the Brake Fluid Reservoir and the Brake Fluid Level Sensor. This is the link to the dealer report [XXX] . No one other than the dealer has inspected these parts to my knowledge. There was no accident of any kind. I personally felt unsafe after these parts failing and reached out to Mazda Customer Care to request investigation of the issue. The case manager just called me back today to say they could not help me. Mazda has denied warranty coverage, claiming the parts are not covered. However, I really do feel this is a critical safety system component that failed after normal emergency use with no collision or impact. Why I feel this is a safety concern: - The brake warning system became unreliable after a single emergency stop. - My car only has 42k miles and is in excellent condition and is fully dealer serviced. - A driver could lose the ability to receive proper brake system warnings if this failure occurs again. - A critical brake sensor should not fail under normal driving conditions, and its failure could lead to delayed driver response in an actual brake fluid loss scenario. It makes me worry for the future. For your consideration: I believe this represents a safety-related defect that should be investigated, as it affects the reliability of the brake system warning indicators in the 2019 Mazda 3. I appreciate your time and consideration. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Seat belts
The seat belt stopped retracting and no longer works, it was reported directly to the Mazda agency, but the warranty was not valid. The dealer said that the tensioners no longer work and the seat belt needs to be replaced.
- Seat belts · Unknown or other
For the seat belt it does not retract back and there was no issue before. It suddenly stopped working and all of the seatbelt is out. This is a safety issue for anyone sitting in the front passenger seat. For the unknown part the button in the trunk to pull the back passenger seats down suddenly…
For the seat belt it does not retract back and there was no issue before. It suddenly stopped working and all of the seatbelt is out. This is a safety issue for anyone sitting in the front passenger seat. For the unknown part the button in the trunk to pull the back passenger seats down suddenly stopped working and no issues before then. I’m more concerned with the seat belt because this is a huge safety concern and issue. The seatbelt does not retract at all, leaving it completely extended and unusable. This issue occurred without any prior incident, accident, or external damage—it simply stopped working. This failure poses a serious safety risk, as the seatbelt cannot properly restrain a passenger in case of a sudden stop or crash. I have checked for recalls on my vehicle but found none related to this issue. I request that NHTSA investigate this issue, as it may indicate a manufacturing defect. If necessary, I would also like to request a recall or manufacturer repair program to address this safety concern.
- Air bags
A few weeks ago the following error message popped up on my dashboard: “Airbag Malfunction. Have vehicle inspected”. This message came and went intermittently whenever I had a passenger in the vehicle. I scheduled and appointment at my local Mazda dealership service center and in the meantime…
A few weeks ago the following error message popped up on my dashboard: “Airbag Malfunction. Have vehicle inspected”. This message came and went intermittently whenever I had a passenger in the vehicle. I scheduled and appointment at my local Mazda dealership service center and in the meantime looked up the issue and found that it was extremely common and caused by a design flaw where the wire harness to the seat airbags was too short causing eventual failure. The issue was so prominent that Mazda even issued a service bulletin on how to fix it which included replacing the wire harness and adding extra security clips to help prevent future failure. So I get my car to the service center and after looking at it they confirm this exact issue, say it is not covered under any extended warranty and tell me that it will cost approximately $1,000 to fix (diagnostic, parts plus labor). I asked how a safey issue such as an airbag not deploying isn’t covered and they reaffirm that it is NOT a safety issue and that there is no recall for it nor would it fail inspection with that error message. They also did confirm that in the event of an accident that airbag would not deploy while that error message was showing. I am at a loss right now and am not sure what to do as I cannot afford a $1,000 fix and am very confused as to how this design flaw for what I believe to be a safety issue is not covered under a recall.
- Engine
This began on 10.19.24 and as of 11.03.24 is ongoing and not repaired. On 10/19/24, while I was at a red light, the RPMs on my vehicle went up and down repeatedly. After I arrived at my destination, which was about a half mile away, and put the car in park, the RPMs repeatedly went up and down…
This began on 10.19.24 and as of 11.03.24 is ongoing and not repaired. On 10/19/24, while I was at a red light, the RPMs on my vehicle went up and down repeatedly. After I arrived at my destination, which was about a half mile away, and put the car in park, the RPMs repeatedly went up and down between 1,000 and 2,000 RPMs and the check engine light came on, and a message displayed saying malfunction - have the vehicle inspected. I spent $100 at my mechanic who could not pinpoint the issue. After I picked up the car, I stopped to get gas and then my battery died. I then decided to take my car to the dealer where I purchased it, Mazda of Roswell. After I put the car in park at the Mazda of Roswell service department, the RPMs started going back and forth between 1,000 and 2,500 RPMs. My car spent 6 days at Mazda of Roswell, where the service dept was unresponsive and my car was never inspected. I then spent $1600 at North Roswell Automotive, only to have the issue appear again after driving less than two miles. I am not sure it is safe to drive a vehicle in which the RPMs are unstable. So far this has only happened when the car is idling or in park. If it happens when the car is in motion I hope I am able to control the vehicle. My car needs service at a Mazda dealer but I need the dealer to be honest with me about what to expect in terms of how long it will take to address the issue. Since this is an engine issue, this issue could be something that causes the car to stall or fail at any time, including while I am in traffic; it could also be electrical, since the battery suddenly died without warning. This would place myself and others on the road in danger. I purchased the battery just over one year ago, so I do not know if there is an issue there.
- Structure › Body
The car has had a lot of issues. The inside driver side glass for the display dash fogged up and had to be replaced. The first replacement didn’t fix it and I had to threaten legal action to get Mazda to replace the glass a second time before it finally resolved the issue. The car (which is washed…
The car has had a lot of issues. The inside driver side glass for the display dash fogged up and had to be replaced. The first replacement didn’t fix it and I had to threaten legal action to get Mazda to replace the glass a second time before it finally resolved the issue. The car (which is washed and waxed weekly), got rust on it in year 3. Mazda repaired it and promised it would not return. 14 months later the rust is back and Mazda won’t repair it. I have escalated with no avail. I have had to replace the air conditioning fan for over $1K. I bought the car brand new with 59 miles on it, I have kept up on every maintenance and kept records and today it has 18,000 miles and I am told the transmission needs replaced. 18,000 miles on a garage kept car? This is not right!
- Engine
I had an oil change back in April of 2024. I have been driving the last couple of days and after about 15 minutes my low oil light comes. this car has 58.800 miles on it. I stopped at a oil express to see if I was low on oil but they said I was at full. I also checked to see if they saw anything…
I had an oil change back in April of 2024. I have been driving the last couple of days and after about 15 minutes my low oil light comes. this car has 58.800 miles on it. I stopped at a oil express to see if I was low on oil but they said I was at full. I also checked to see if they saw anything leaking but they also said they didn't see anything. if the gasket is bad 58,000 that is telling me it's a faulty product. I'm afraid that my engine could lock up on the highway and cause a bad accident.
- Power train
I noticed oil was leaking and my engine was steaming after driving. My mechanic found a crack in a cylinder after watching YouTube and finding out Mazda has this issue.
- Fuel/propulsion system
Shown engine light on dashboard and Car was struggling to run while pressing the gas, took to the mazda dealership and they told low pressure and high pressure fuel pump needs to be replaced.
- Unknown or other
The engine coolant system/electronic coolant control valve is known for failing on the N/A Skyactiv-G engine. When it fails, it fails stuck open. There is a TSB out for this problem (01-011/21). This results in the engine coolant never making it to operating temperature, and poor heater performance…
The engine coolant system/electronic coolant control valve is known for failing on the N/A Skyactiv-G engine. When it fails, it fails stuck open. There is a TSB out for this problem (01-011/21). This results in the engine coolant never making it to operating temperature, and poor heater performance during cold weather. When I took it to a dealer, they stated that the check engine light must come on from DTC P0126:00 before they can address the problem under warranty. Even after driving the car and having 30+ minute drives where the temperature gauge never makes it past the first tick (blue), I haven't had the check engine light come on. It's unclear what circumstances are required for DTC P0126:00 to occur, but I've never had a car essentially not get warm during an entire 30+ mile highway drive, even when it's 0 fahrenheit outside. It appears like this is a degenerative problem as I did not have this problem last cold season. This year, since the first day it has been colder than about 45 degrees, the engine has struggled to reach operating temperature, and of course is even worse now that it is colder. Without the heated seat, it would be difficult to be comfortable in this car due to this problem.
- Engine
Cylinder head is leaking oil due to known defect by Mazda. The rocker arm rubs the cylinder and causes the wall the thin and oil to leak through. Oil sprays on exhaust and other moving parts causing a safety concern due to possible oil combustion. This is in relation to TSB SA-031/21. Only…
Cylinder head is leaking oil due to known defect by Mazda. The rocker arm rubs the cylinder and causes the wall the thin and oil to leak through. Oil sprays on exhaust and other moving parts causing a safety concern due to possible oil combustion. This is in relation to TSB SA-031/21. Only alert is the low engine oil light due to the leak. At this point, oil has already covered a majority of the engine compartment and exhaust manifold.
- Engine
Cracked cylinder head causing oil leak. Confirmed by Mazda Dealership. Vehicle has always had routine maintenance and remote start used to warm engine prior to driving. No warning lights appeared to alert driver prior to noticing issue- took it in because driver could smell burning oil which is a…
Cracked cylinder head causing oil leak. Confirmed by Mazda Dealership. Vehicle has always had routine maintenance and remote start used to warm engine prior to driving. No warning lights appeared to alert driver prior to noticing issue- took it in because driver could smell burning oil which is a fire risk to safety of occupants while using vehicle. This type of issue is a manufacturer flaw and should be covered with recall since there are a lot of people online experiencing the exact same issue.
- Electrical system
The vehicle's battery has gone dead on several occasions since replacing the OEM battery. The OEM battery which was approximately 3 years old, also had gone dead, prompting its replacement. The battery has gone dead within 1-2 days of not using the car. Charging the battery by running it is only a…
The vehicle's battery has gone dead on several occasions since replacing the OEM battery. The OEM battery which was approximately 3 years old, also had gone dead, prompting its replacement. The battery has gone dead within 1-2 days of not using the car. Charging the battery by running it is only a temporary fix as the car needs to be constantly driven in order to charge the battery, which is not usual and customary for the maintenance of a vehicle. This cannot be functioning to manufacturer's specifications, as I find it extremely difficult to believe that manufacturer's specifications stipulate to drive the car with more frequency. This is a safety issue. Should this happen during the winter months, an individual may be left stranded. The NHTSA must demand Mazda to issue a safety recall to fix this safety issue.
- Engine · Unknown or other
Vehicle will over heat and then show warning messages that auto light system malfunction and engine will shut off randomly.
- Power train
The contact owns a 2019 Mazda Mazda3. The contact stated while driving 40 MPH, the vehicle lost motive power with the vehicle network malfunction, vehicle inspection”, the check engine warning light and all the safety features were disabled, and the windshield wipers turned on independently. The…
The contact owns a 2019 Mazda Mazda3. The contact stated while driving 40 MPH, the vehicle lost motive power with the vehicle network malfunction, vehicle inspection”, the check engine warning light and all the safety features were disabled, and the windshield wipers turned on independently. The contact was able to pull over on the side of the road. The contact mentioned that the gear shifter failed to shift out of park(P) and the vehicle was turned off. The vehicle was restarted, and the contact was able to operate the vehicle normally. The vehicle was taken to the dealer for a diagnostic test and stated that no failure was found however, the failure reoccurred. The vehicle was taken back to the dealer and the dealer stated that they were aware of the failure, but the vehicle needed to be diagnosed by a Tech. The vehicle was not repaired. The manufacturer was not contacted. The failure mileage was 36,329.
- Electrical system › Instrument cluster/panel · Engine · Exterior lighting
The contact owns a 2019 Mazda Mazda3. The contact stated while driving approximately 30 MPH, the vehicle lost motive power and stalled. The contact stated that after pulling over to the shoulder the vehicle would not immediately restart. The contact stated that approximately five minutes later, the…
The contact owns a 2019 Mazda Mazda3. The contact stated while driving approximately 30 MPH, the vehicle lost motive power and stalled. The contact stated that after pulling over to the shoulder the vehicle would not immediately restart. The contact stated that approximately five minutes later, the vehicle restarted without pressing the start button. The contact stated that the message "Network Malfunction" was displayed. The contact stated that several electrical malfunctions had previously occurred with the vehicle including the front windshield wipers independently activating, with the headlights and instrument cluster lights flickering. The cause of the failure was not yet determined. The local dealer was notified of the failure. The manufacturer was not yet notified of the failure. The failure mileage was 59,000.
- Fuel/propulsion system
Faulty Fuel pump by factory
- Fuel/propulsion system
Check engine light appeared then I had a dead battery. I purchased a new one and the check engine light went away for a while until now. Then I found a letter online that I never received of a recall for california vehicles that were manufactured during specific dates. Mine is listed as one but it does not have an active recall.
- Fuel/propulsion system
Dealer service tech stated the high pressure and low pressure fuel pumps failed and needed replaced. My car was not included in the recall regarding fuel pumps for Mazda, so the dealer would only cover 50 percent of the cost. Service tech and warranty service rep stated that Mazda was aware that…
Dealer service tech stated the high pressure and low pressure fuel pumps failed and needed replaced. My car was not included in the recall regarding fuel pumps for Mazda, so the dealer would only cover 50 percent of the cost. Service tech and warranty service rep stated that Mazda was aware that what happened to my car is a factory malfunction but because my car is out of warranty they would not cover the entire expense. My car is 3 years old and only has approximately 67,000 miles on the engine. The fuel injectors were replaced at 10,000 miles by warranty. The service tech even stated this is obviously regarding the recall of the fuel pumps and did not understand why my car was not included.
- Forward collision avoidance
The contact owns a 2019 Mazda Mazda3. The contact stated while driving 35 MPH, the brake warning light illuminated and the vehicle would brake suddenly without the driver depressing the brake pedal. The failure had become recurring. The contact had taken the vehicle to a local dealer where it was…
The contact owns a 2019 Mazda Mazda3. The contact stated while driving 35 MPH, the brake warning light illuminated and the vehicle would brake suddenly without the driver depressing the brake pedal. The failure had become recurring. The contact had taken the vehicle to a local dealer where it was diagnosed and determined that the failure could not be duplicated. The vehicle had not been repaired. The contact researched online and related the failure to NHTSA Campaign Number: 19V907000 (Forward Collision Avoidance). The manufacturer had been informed of the failure. The failure mileage was approximately 15,000.
- Electrical system · Forward collision avoidance › Automatic emergency braking · Power train
the vehicle started surging at low soeeds and accelarating and control module issues for the transmission
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11011345CUSTOMER SERVICE PROGRAM CSP12 - DENSO LOW-PRESSURE FUEL PUMP CUSTOMER SERVICE PROGRAM WARRANTY EXTENSION: Attention ALL Mazda Dealers: This is a Warranty Extension and not a recall campaign. Repairs are not to be made unless there is a confirmed low-pressure fuel pump failure within the coverage period. As of November 18, 2024 Repair Procedures and Parts and Warranty documents are available.
- 11011341CUSTOMER SERVICE PROGRAM CSP12 - DENSO LOW-PRESSURE FUEL PUMP CUSTOMER SERVICE PROGRAM WARRANTY EXTENSION: Attention ALL Mazda Dealers: This is a Warranty Extension and not a recall campaign. Repairs are not to be made unless there is a confirmed low-pressure fuel pump failure within the coverage period. As of November 18, 2024 Repair Procedures and Parts and Warranty documents are available.
- 11011338CUSTOMER SERVICE PROGRAM CSP12 - DENSO LOW-PRESSURE FUEL PUMP CUSTOMER SERVICE PROGRAM WARRANTY EXTENSION: Attention ALL Mazda Dealers: This is a Warranty Extension and not a recall campaign. Repairs are not to be made unless there is a confirmed low-pressure fuel pump failure within the coverage period. As of November 18, 2024 Repair Procedures and Parts and Warranty documents are available.
- 11011336CUSTOMER SERVICE PROGRAM CSP12 - DENSO LOW-PRESSURE FUEL PUMP CUSTOMER SERVICE PROGRAM WARRANTY EXTENSION: Attention ALL Mazda Dealers: This is a Warranty Extension and not a recall campaign. Repairs are not to be made unless there is a confirmed low-pressure fuel pump failure within the coverage period. As of November 18, 2024 Repair Procedures and Parts and Warranty documents are available.
- 11011331CUSTOMER SERVICE PROGRAM CSP12 - DENSO LOW-PRESSURE FUEL PUMP CUSTOMER SERVICE PROGRAM WARRANTY EXTENSION: Attention ALL Mazda Dealers: This is a Warranty Extension and not a recall campaign. Repairs are not to be made unless there is a confirmed low-pressure fuel pump failure within the coverage period. As of November 18, 2024 Repair Procedures and Parts and Warranty documents are available.
- 11011326CUSTOMER SERVICE PROGRAM CSP12 - DENSO LOW-PRESSURE FUEL PUMP CUSTOMER SERVICE PROGRAM WARRANTY EXTENSION: Attention ALL Mazda Dealers: This is a Warranty Extension and not a recall campaign. Repairs are not to be made unless there is a confirmed low-pressure fuel pump failure within the coverage period. As of November 18, 2024 Repair Procedures and Parts and Warranty documents are available.
- 11011141Some customers may report concerns with interior upholstery surface stains particularly on high contact areas (e.g.: seats, steering wheel, door panels, shifter...etc.). This may be caused by skin oils or chemicals such as hand lotions.
- 11011140When the Telematics Control Unit (TCU) replacement is necessary due to a failure, use MDARS to activate the new TCU after replacement. Use the information in this service alert to initialize the new TCU until the procedure on MGSS is updated.
- 11011139A customer may complain of a rattle noise from the right side of the dash. The noise may be coming from the passenger side airbag.
- 11011138Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF Climate Control 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or "\".
- 11011137On certain subject vehicles, the check engine light is illuminated with diagnostic trouble code (DTC) P0126, due to the fail-safe thermostat being stuck open. Additionally, you may notice one or more of the following symptoms: -Engine takes longer to warm up. -Engine temperature gauge fluctuates. -Low coolant temperature indicator (blue) light stays on longer or turns on while driving. -Poor heater performance, especially at idle. This warranty extension program applies only to the replacement of fail-safe thermostat of the vehicle exhibiting the concerns mentioned above. If the check engine light illumination is determined to be unrelated to the fail-safe thermostat being stuck open, the inspection and repair are not covered under this program.
- 11011133Some customers may experience a check engine light ON with DTC P0126:00 (Thermostat stuck open) and one or more of the following symptoms: Engine takes longer to warm up. Engine temperature gauge fluctuates. Low coolant temperature indicator (blue) light stays on longer or turns on while driving. Poor heater performance, especially at idle.
- 11010992Some customers may experience rear subwoofer audio sound pauses intermittently at high volume levels. When the volume level is lowered, the subwoofer audio sound resumes. The actual volume level may vary depending on the audio source. If the audio source consists of many low frequency (40 - 70 Hz) sounds, the concern may occur at volume level 35 or higher. This concern may be caused by improper audio amplifier control software. To eliminate this concern, the control software has been modified.
- 11009665Mazda Motor Corporation has decided to conduct a Special Service Program (SSP) to extend the warranty coverage for a specific repair of the fail-safe thermostat in the coolant control valve on certain CX-5, Mazda3, CX-3, Mazda6 and CX-30 vehicles that are equipped with the suspected coolant control valve. The warranty coverage for a specific repair of fail-safe thermostat has been extended to 15 years (180 months) /150,000 miles (240,000 km) whichever comes first, from the original warranty start date. Concern Outline: On certain subject vehicles, the check engine light is illuminated with DTC P0126:00 (Thermostat stuck open) stored in memory and one or more of the following symptoms may occur: Engine takes longer to warm up, Engine temperature gauge fluctuates, Low coolant temperature indicator (blue) light stays on longer or turns on while driving, Poor heater performance, especially at idle. This is a warranty extension for the specified repair only. Inspection and replacement of non-failed parts will not be eligible for reimbursement under this SSP to the dealer or customer. This program extends the warranty period for actual failures due to defects in workmanship or materials in accordance with the Mazda Warranty Policy and Procedures. If a customer arrives at your dealership with the concern described, please repair under this Special Service Program.
- 11009664Mazda Motor Corporation has decided to conduct a Special Service Program (SSP) to extend the warranty coverage for a specific repair of the fail-safe thermostat in the coolant control valve on certain CX-5, Mazda3, CX-3, Mazda6 and CX-30 vehicles that are equipped with the suspected coolant control valve. The warranty coverage for a specific repair of fail-safe thermostat has been extended to 15 years (180 months) /150,000 miles (240,000 km) whichever comes first, from the original warranty start date. Concern Outline: On certain subject vehicles, the check engine light is illuminated with DTC P0126:00 (Thermostat stuck open) stored in memory and one or more of the following symptoms may occur: Engine takes longer to warm up, Engine temperature gauge fluctuates, Low coolant temperature indicator (blue) light stays on longer or turns on while driving, Poor heater performance, especially at idle. This is a warranty extension for the specified repair only. Inspection and replacement of non-failed parts will not be eligible for reimbursement under this SSP to the dealer or customer. This program extends the warranty period for actual failures due to defects in workmanship or materials in accordance with the Mazda Warranty Policy and Procedures. If a customer arrives at your dealership with the concern described, please repair under this Special Service Program.
- 11009654The SKYACTIV-DRIVE FW6A-EL AT uses Automatic Transmission Fluid (ATF) Type: FZ. Only use ATF-FZ to fill or top off the fluid level. ATF-FZ is specially designed for use in the SKYACTIV-DRIVE series AT. It is a low viscosity formula with less friction for better fuel economy. NOTE: ATF-FZ is colored blue for easy identification.
- 11009647A new cylinder head assembly for service parts has been newly established for SKYACTIV-G 2.5 with cylinder deactivation when replacement is needed. Valves, valve springs, valve spring seats, and cotters (IN/EX) are included in the new assembly. Hotline and MASH authorization is not required to order parts for performing this repair. If there are any questions on part ordering or part status, contact the Dealer Assistance Group.
- 11009644Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
- 11009636Some vehicles may exhibit a rear console lid with a sticking feeling or a squeaking noise when opening and/or closing. This is caused by an inappropriate shape of the console lid hinge pin where the position of the hinge pin (1) becomes misaligned when the rear console lid is repeatedly opened and closed. When parts around the hinge pin thermally expand, the result creates a gap in the hinge of the rear console lid.
- 11009635Some customers may complain that the rear console lid does not slide smoothly. This may be caused by improperly positioned felt pads attached to the rear console lid lock, which may have moved out of position after repetitive use. The exposed adhesive residue may stick to the rail and disrupt smooth sliding operation.
- 11008580Mazda Connect Services - Frequently Asked Questions (FAQ)
- 11008579Mazda Connect Services - Frequently Asked Questions (FAQ)
- 11008578When the Telematics Control Unit (TCU) replacement is necessary due to a failure, use MDARS to activate the new TCU after replacement. Use the information in this service alert to initialize the new TCU until the procedure on MGSS is updated.
- 11008577Some customers may complain about scratches on the instrument cluster lens.
- 11008576Qi Wireless Charger symptom troubleshooting.
- 11008575Some customers may complain about the Active Driving Display not displaying turn by turn (TBT) travel direction or navigation information.
- 11008573Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF Climate Control
- 11008571Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
- 11008430This information will give you the necessary knowledge to respond to customers concerns of Smart Brake Support (SBS) unintended braking. By educating the customer on the system operation, it should reduce their anxiety or distrust of the vehicle.
- 11008429Symptom 1: Some customers may complain about hearing a grinding noise and/or vibration occur when applying the brake. This is due to rust on the rear brake disc plate. The brake pad has insufficient disc-rust prevention performance, resulting in the disc plate rusting. To eliminate this concern, the pad material has been improved to prevent rust on the disc surface. Symptom 2: Some vehicles may exhibit a squeal noise from the rear brakes when braking lightly while driving at a slow speed. The squeal noise is caused by the disc pad surface fluctuating. To eliminate this concern, the brake pads have been modified.
- 11008423The Blind Spot Monitoring (BSM) system can malfunction with the following symptoms if the rear side radar sensors are installed facing the wrong direction. BSM system indicates vehicle on the opposite side. i-ACTIVSENSE indicator ring will not turn green Rear Cross Traffic Alert (RCTA) does not work Rear side radar sensor aiming may fail TPMS DTC(s) stored
- 11007029For improvement of electrical diagnosis, the SKYACTIV Wiring Terminal Test Kits has been delivered all the dealers. The terminal test kit enables you: To check pin fit drag of all PCM terminals used in SKYACTIV vehicles and compare suspect terminal drag with a known good terminal. To measure the voltage/resistance avoiding any terminal damage.
- 11007024Some customers will report that their fuel door was stuck closed and would not open to refuel the vehicle. Follow the repair steps below unless the conditions outlined in TSB 09-019/21 - FUEL-FILLER LID PANEL IS DEFORMED for 2019-2021 Mazda3 and 2020-2021 CX-30 are present.
- 11007022Some vehicles may experience exterior trim heat damage such (melted, separating, etc.) when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 11007019If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
- 11007018Interior parts made of resin have antistatic coating to prevent dust from sticking on the surfaces, and depending on the conditions of use, the antistatic components may crystallize slightly, giving an appearance of white stains on the surface. To remove the stains, wipe the stained surface with a towel soaked with water mixed with a small portion of a neutral detergent. If the white stains reappear again, simply wipe them again in the same way.
- 11007013Auxiliary key blank cutting procedure. There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method B. Auxiliary Key Code Cut Method
- 11007010Some customer's might state that they notice fluid or oil leaking/dripping on the ground when the vehicle is parked. For this concern, inspect the vehicle for any trace of a fluid or oil leak and use the following examples as a guide to determine if it is severe enough to require a repair, or just to clean the area and monitor it at the next service.
- 11007009Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
- 11006995Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
Every Mazda MAZDA3 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.