2011 Mazda MAZDA3
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mazda › MAZDA3 › 2011
These records cover every 2011 Mazda MAZDA3. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
2 recalls name the 2011 Mazda MAZDA3. Newest first.
Mazda North American Operations (Mazda) is recalling certain 2011 Mazda2 and 2010-2011 Mazda3 and Mazdaspeed3 vehicles equipped with a manual seat lifter. In the affected vehicles, the seat height adjustment lifter links may break or detach from the seat frame and the seat angle may incline causing the driver to not be able to maintain an appropriate…
Risk and remedy
Risk
If the driver cannot maintain an appropriate driving position, there is an increased risk of a crash.
Remedy
Mazda will notify owners, and dealers will inspect the seat lifter links and install a reinforcement bracket to the lifter links, or replace the entire seat adjuster unit, free of charge. The recall began April 7, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 0917B.
Mazda North American Operations (Mazda) is recalling certain model year 2010-2013 Mazda3 and Mazdaspeed3 vehicles manufactured November 18, 2008, to June 8, 2013, 2012-2015 Mazda5 vehicles manufactured October 26, 2010, to June 22, 2015, 2016 CX-3 vehicles manufactured June 1, 2015, to December 26, 2015, and 2013-2016 CX-5 vehicles manufactured December 15…
Risk and remedy
Risk
If the lift gate falls unexpectedly, it may hit the user, increasing their risk of injury.
Remedy
Mazda dealers will replace the both lift gate supports, free of charge, however parts are not currently available. The recall began April 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9916H.
Owner complaints
132 complaints12 involved a crash2 involved a fire13 injuries
What owners report most
Latest complaints
- Air bags · Seats
The contact owns a 2011 Mazda Mazda3. The contact stated that while operating the vehicle, the front driver’s side seat wobbled and was unsecured. The vehicle was taken to the local dealer, who determined that the front driver’s side seat lifter link was inoperable and needed to be replaced. The…
The contact owns a 2011 Mazda Mazda3. The contact stated that while operating the vehicle, the front driver’s side seat wobbled and was unsecured. The vehicle was taken to the local dealer, who determined that the front driver’s side seat lifter link was inoperable and needed to be replaced. The vehicle was not yet repaired. The manufacturer was notified of the failure, but no assistance was provided. The contact was informed that the VIN was not included in NHTSA Campaign Number: 17V082000 (SEATS). The contact stated that the vehicle had experienced the failure listed in the recall. Additionally, the contact stated that the dashboard was melted and warped. The contact was concerned that the front air bags would not properly deploy due to the warped dashboard housing in the front driver and passenger side air bags. The failure mileage was 167,850.
- Air bags
The airbag system failed to deploy during a major accident I was in, where my car rolled multiple times, and the collision that totaled my car. This includes the front airbags, impact sensors, and/or the airbag control module not activating. The vehicle is currently in the possession of the…
The airbag system failed to deploy during a major accident I was in, where my car rolled multiple times, and the collision that totaled my car. This includes the front airbags, impact sensors, and/or the airbag control module not activating. The vehicle is currently in the possession of the insurance company and can be made available for inspection upon request. During the crash, no airbags deployed, which significantly increased the risk of serious injury or death. The lack of airbag deployment left my partner and me completely unprotected at the moment of impact, including the number of times we rolled, seriously putting our safety at severe risk The vehicle is no longer drivable. The police report notes that the airbags did not deploy. The vehicle is in the process of inspection by my insurance adjusters as part of the total‑loss evaluation. The manufacturer has not yet inspected the airbag system, but the vehicle can be made available if Mazda requests an inspection. There were no warning lights, messages, or symptoms indicating an airbag or safety system issue before the crash. The airbag system gave no indication of malfunction before the failure occurred.
- Unknown or other
I was driving it and randomly the AT and TC , and check engine light came on and the car went into limp mode, after doing some research it appears to happen to all 2009-2011 Mazda3's and it's a safety hazard. It's a safety hazard because of when it's stuck in limp mode sometimes if your at a light…
I was driving it and randomly the AT and TC , and check engine light came on and the car went into limp mode, after doing some research it appears to happen to all 2009-2011 Mazda3's and it's a safety hazard. It's a safety hazard because of when it's stuck in limp mode sometimes if your at a light or something it'll start shifting and if you're not holding the brake completely down it will make the car lurch forward like 2-3 feet more if you don't react fast enough. This is a serious problem as it can cause a wreck. And you never know when it's going to happen there will be no symptoms it will just go into limp mode sometimes it'll rapidly go in and out and I'm sure that's causing damage to my transmission. Please make Mazda recall the TCM part and replace it. Thank you so much for taking the time to read my complaint/safety issue. Have a good day or night!!!
- Unknown or other
The instrument panel above the information display in my 2011 Mazda3 has warped and created a visible gap, which is a known defect previously covered under Mazda’s Special Service Program A9 (SSP A9). While originally described as a cosmetic issue, in my vehicle the gap now allows engine odors and…
The instrument panel above the information display in my 2011 Mazda3 has warped and created a visible gap, which is a known defect previously covered under Mazda’s Special Service Program A9 (SSP A9). While originally described as a cosmetic issue, in my vehicle the gap now allows engine odors and emissions to enter the passenger cabin. This condition presents a safety and health risk to occupants. My daughter drives the vehicle daily to college and is regularly exposed to these fumes. To confirm the problem, I used a Temtop M2000C Advanced Air Quality Monitor and recorded the following CO₂ levels inside the cabin compared to outside air: - Outside vehicle (baseline): 348 ppm - Inside after 1 minute: 436 ppm - Inside after 5 minutes: 1,027 ppm - Inside after 15 minutes: 1,645 ppm According to the monitor’s air quality guide, 1,501–2,500 ppm CO₂ is classified as “Unhealthy.” These readings indicate a measurable intrusion of emissions into the cabin. Mazda Customer Experience has acknowledged the vehicle is outside the SSP A9 warranty window and denied repair assistance, but I believe this issue is no longer cosmetic. The defect now creates a condition that may adversely affect occupant health and safety and should be considered under NHTSA’s authority for potential investigation. The vehicle can be inspected upon request. A Mazda dealer (Group 1 Mazda Denton, Texas) has provided a repair estimate of $1,307.77 for instrument panel replacement. Photos of the gap and air quality readings are available.
- Unknown or other
The car is jerking and check engine light is on. Also when you are stopped and press on the gar it takes a bit to get speed. The transmission control module needs to be replaced. There seems to be this issue on many mazda's just not sure why a recall hasn't been done for this case.
- Engine · Seats
Defective Driver's seat construction made by Mazda Mfg Corp. I was the first person to report this cheaply made driver's seat failure to Mazda Corp in Irvine, CA in early 2015 or 2016. Recall was finally issued a year afterwards because Mazda dragged their feet, and only after I threatened to sue…
Defective Driver's seat construction made by Mazda Mfg Corp. I was the first person to report this cheaply made driver's seat failure to Mazda Corp in Irvine, CA in early 2015 or 2016. Recall was finally issued a year afterwards because Mazda dragged their feet, and only after I threatened to sue them if I was ever in an accident, and the seat was to totally fall apart, and maim me for life did they finally take action. The Recall fix (cheap bandaid clamp that again failed because seat frame welds had failed as well) was never done right, and as a result the seat totally fell apart, and Ed Howard Lincoln Mazda of Sarasota, FL didn't want to do anything further at that point (cost out of pocket wise). I was told by a different Mazda Dealership in Ft Myers, FL that that defective seat should have been totally replaced if they would've handled it correctly. So Ed Howard Lincoln Mazda really screwed me on that one! As related to the 2.5L Mazda engine, I also had/have a engine failure part there as well. It's called the ENGINE COOLANT (WATER) OUTLET FLANGE, and the bottom left hand bolt (1 of 4 bolts total) that's suppose to hold this cheap plastic part in place was stripped (over-torqued) at the production assembly line time that the engine was made (put together). Now the cheap plastic replacement part is leaking again from the same lower left hand corner, and this is a well Known Ford & Mazda 2.5L engine failure design as stated in many a Mazda online forum! This also should have been recalled, as now my 2011 Mazda 3 is down again. Engine overheated again on Oct 13, 2023. Prior repair to replace this defective Flange was done in Feb or Mar of 2022. Cheap Plastic parts put on a Metal engine just don't work well at all. Common Physics would tell you that! I have documents in my storage unit if you need them.
- Seats
My seat lifter broke causing the driver's seat to rock back and forth. I brought my vehicle to my local dealer on 05/18/2022 to have an outstanding NHTSA recall 17V-082 performed to repair the issue. I was informed that the necessary part to repair the seat was on backorder and there was no ETA…
My seat lifter broke causing the driver's seat to rock back and forth. I brought my vehicle to my local dealer on 05/18/2022 to have an outstanding NHTSA recall 17V-082 performed to repair the issue. I was informed that the necessary part to repair the seat was on backorder and there was no ETA, but that I would be contacted when a part was available. Over the following nine months, I periodically followed up to see if they had received the part, culminating with being told by the dealer on 03/02/2023 that the part order was canceled and flagged as no longer available and that I needed to contact Mazda directly. I then called Mazda, who told me that the part was indeed marked as retired and advised that I seek an aftermarket replacement, of which none is available. They did check in my local area and found only one remaining part in a dealer's inventory, which I'll be driving to on 03/11/2023 to have the repair done. There has been no consideration made by Mazda for my safety while driving the vehicle, and for anyone still requiring this repair, the part is "retired" and no longer available from Mazda for an open recall.
- Power train
The contact owns a 2011 Mazda Mazda3. The contact stated while driving at an undisclosed speed, the clutch became inoperable. There were no warning lights illuminated. The dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was notified but no additional assistance was provided. The failure mileage was approximately 80,000.
- Suspension
The contact owns a 2011 Mazda Mazda3. The contact stated that while driving at an undisclosed speed, the steering wheel started to shake. The contact stated that the tire pressure warning light and check engine warning lights intermittently illuminated. The vehicle was taken to the dealer where it…
The contact owns a 2011 Mazda Mazda3. The contact stated that while driving at an undisclosed speed, the steering wheel started to shake. The contact stated that the tire pressure warning light and check engine warning lights intermittently illuminated. The vehicle was taken to the dealer where it was diagnosed that the suspension, seat connector, and an unknown software needed to be updated. The contact then stated that due to the suspension failure, the tires were worn prematurely. The vehicle was repaired; however, the failure recurred. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure and the contact was advised to call the NHTSA Hotline for assistance. The failure mileage was approximately 170,000.
- Unknown or other
Transmission Control Module Failed while driving. Do to this there was a loss in ability to properly shift which made driving dangerous. There has been several online reports and accounts about this specific car signaling a check engine light coming on, AT light coming on and when other indirect or…
Transmission Control Module Failed while driving. Do to this there was a loss in ability to properly shift which made driving dangerous. There has been several online reports and accounts about this specific car signaling a check engine light coming on, AT light coming on and when other indirect or incorrect codes like Solenoid (A), (B), or (C). Luckily I did not crash therefore, I have no inspections have been necessary by police or insurance representatives. But I did have my local mechanic shop diagnose the problem. I noticed the car shifted a little weird but, no lights, warning, or messages came prior to failure. In the first couple of minutes prior to the first failure, was a simple check engine light which read a code for the Solenoid. Local shop diagnosed Transmission Control Module Failure and proceeded to "fix" the module. Second Failure was mid drive, AT light came on and a few minutes into my drive back home to park the car, it failed.
- Fuel/propulsion system
The Baffle in my tank has broken loose for uncertain reasons. This seems to be a common problem with Mazda and has had a recall in the 2015 models even.
- Steering
UNKNOWN. Electric power steering just suddenly stopped working for no apparent reason. Very hard to steer. DANGEROUS!
- Electrical system · Visibility/wiper
The Dashboard is peeling above the display screen that shows information for Radio,CD, AUX, Time, Volume, Temp Outside, etc (black display screen with orange text/font). Above this display screen the dashboard is lifting up. Which has created about a 1 inch+ gap/spacing between the display and…
The Dashboard is peeling above the display screen that shows information for Radio,CD, AUX, Time, Volume, Temp Outside, etc (black display screen with orange text/font). Above this display screen the dashboard is lifting up. Which has created about a 1 inch+ gap/spacing between the display and dashboard This gap has resulted in the following: 1). Inhaling of windshield fluid through AC vents (4 total on dashboard) -- when using windshield wipers to dispense windshield fluid to wipe windshield clean of dirt/debris. You can smell the funes from the windshield fluid. And windows are not open when using the windshield wipers. 2). The material used for the dashboard has peeled off and gone in between the gap. It has resulted in the AC vents dispensing the material when adjusting the open and close feature of the AC vent or making any direction adjustment of where I want the air conditioning to blow in the car. 3) The gap/spacing between dashboard and display screen has also resulted in the interior side of the windshield to have a buildup of smog on the windshield. It has resulted in issues seeing at night time when cars are driving towards me with their headlights on. When i wipe down, it will be covered again with smog/film in a few days.
- Air bags · Electrical system · Steering
When I’m driving the car, electricity of the car goes off, including headlights. The steering wheel gets locked. It doesn’t do that regularly. Sometimes, it takes weeks to do that, but sometimes it happens once in every five minutes. The red airbag light on the odometer turns on or off randomly.…
When I’m driving the car, electricity of the car goes off, including headlights. The steering wheel gets locked. It doesn’t do that regularly. Sometimes, it takes weeks to do that, but sometimes it happens once in every five minutes. The red airbag light on the odometer turns on or off randomly. But, the worse case is that the airbags are not working while my steering wheel gets locked at the same time. They all start happening around the same time. I took my car to the Mazda Service and another mechanics. Neither of them found the issue. When I leave the car with them, the car doesn’t show these malfunctions. It literally randomly occurs. Therefore, they told me that I need to bring the car when it start happening in regular basis to understand the exact cause for the issue. I don’t know when it becomes a regular issue. 4-5 days ago, when I was turning right on a small street, the wheel locked again. I was about to crash. It’s a deadly malfunction, so I don’t want to wait until then.
- Seats
The contact owns a 2011 Mazda Mazda3. The contact received notification of NHTSA Campaign Number: 17V082000 (Seats) however, the part to do the recall repair was not yet available. The local dealer was contacted several times. The contact stated that the manufacturer had exceeded a reasonable…
The contact owns a 2011 Mazda Mazda3. The contact received notification of NHTSA Campaign Number: 17V082000 (Seats) however, the part to do the recall repair was not yet available. The local dealer was contacted several times. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact stated that the front driver's seat was unsteady while driving and the failure had been recurring since 2017. The vehicle was not diagnosed or repaired. The failure mileage was approximately 100,000. Parts distribution disconnect.
- Unknown or other
Automatic transmission failure. It causes the vehicle to jar around and have misproper steering. For example improper acceleration causes inability to move in a fluid motion. Causes risks of someone rearending or hitting another vehicle.
- Electrical system · Exterior lighting
my Mazda 3 2011 passenger headlight always had water coming into the headlight itself. It has condensation and it is hard to see when using the headlight itself at night. have to wait a few days or so to clear up and then my headlights will flicker because of the water seeping inside of it.
- Unknown or other
My Mazda 3 2011 dash is splitting and it was inspected by the Mazda dealership. It pulls a safety issue because the glue and sticky material that was coming from the dash is shining into my eyes every time I drive during daylight. I am afraid the airbags will be affected too because the dash is coming part that means air bags can be a malfunction also.
- Seats
The seat height adjustment lifter link has broken and my driver seat wobbles tilting up and down during normal operation. There is a recall for this exact issue for this exact model of vehicle 2011 Mazda 3.
- Seats
My exact make and model and year was recalled in 2017 for a driver seat problem. My specific vehicle avoided recall because it was manufactured in November 2010, as the recall only included those manufactured up until September 2010. How is it that my vehicle had the same EXACT problem of those…
My exact make and model and year was recalled in 2017 for a driver seat problem. My specific vehicle avoided recall because it was manufactured in November 2010, as the recall only included those manufactured up until September 2010. How is it that my vehicle had the same EXACT problem of those models but was not included? The seat lifter clamp BROKE-the same exact problem warned about in the recall. I can't afford the $800 repair and this is NOT even my fault.
- Electrical system · Engine · Unknown or other
Transmission slips out and shift shock in first gear to second year. Over revving and bucking on the freeway. These are BAD transmissions
- Air bags · Structure › Body · Unknown or other
The dashboard IS lifting up possibly affecting the drivers side and passengers side airbags deployment. I am very concerned I dont know when it happened
- Seats
The driver seat IS causing server lower back pain regardless of the position of the seat. I tried all ways I could adjust the seat but the curvature in the seat IS pushing against my lower back. I have been easy on the zoom zoom effect but in acceleration and breaking, it just hurts my lower back.
- Electrical system
Anti theft system activated on me after I shut off the car. Was sitting in a parking lot waiting for my daughter to get out of work. I shut the car off and it wouldn't start. My mechanic said the anti theft system activated which shouldn't of happened.
- Visibility › Windshield
TL* the contact owns a 2011 mazda mazda3. The contact stated while driving at various speeds, when he heard an abnormal noise coming from the rear windshield. The vehicle was taken to the local dealer seacoast mazda (180 spaulding turnpike, portsmouth, nh 03801, (603) 436-6811) where the mechanic…
TL* the contact owns a 2011 mazda mazda3. The contact stated while driving at various speeds, when he heard an abnormal noise coming from the rear windshield. The vehicle was taken to the local dealer seacoast mazda (180 spaulding turnpike, portsmouth, nh 03801, (603) 436-6811) where the mechanic was unable to duplicate the failure. The contact stated he continued to experience the failure in cold weather. The manufacturer had been informed of the failure. The failure mileage was approximately 44,500.*ln consumer stated problem occurs when the car IS off without the key.*jb
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007022Some vehicles may experience exterior trim heat damage such (melted, separating, etc.) when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 11007019If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
- 11006987In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealers responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the Speedometer Replacement Label. Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazdas vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMOs services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
- 11005671Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 11003398Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 10251387Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 10244679If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
- 10243569Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 10240496Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 10237216If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
- 10232299Speedometer replacement procedure
- 10226924If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices. Examples: 1. Devices connected to the DLC-2 (battery discharge/DTC stored) 2. Cell phone charger/accessory in 12V socket (engine no start or unable to turn off) 3. GPS tracking device (engine no start/battery discharge) 4. Dash cam (DTC stored) 5. Non-certified USB cable (Apple Carplay/ Android Auto will not connect) 6. Over-sized wheels/tires (incorrect GPS location)
- 10226814Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines below to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal.
- 10225724Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 10217209In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer.
- 10215274This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.
- 10213430Excessive condensation or water within the headlamp assembly caustion
- 10213429Paint damage Mazda pocket paint guide
- 10213427HandsFree bluetooth module and/or text messaging troubleshooting procedure
- 10213425Speedometer replacement procedure
- 10213423Siriusxm satellite radio registration transfer after unit replacement
- 10213422Proper usage of driver's floor mat.
- 10213421Condensation/Fog in front and rear combination lights
- 10213417Passenger fAirbag deactivation (PAD) indicator light illumination
- 10213399Brake noise, judder and dragging diagnosis and servicing
- 10213398Clunk/bang/buzz noise during first forward movement after sitting
- 10213387Shock absorber replacement guidelines
- 10213385Stains appear on wheels
- 10213333Battery test procedure requirements using the GR81291
- 10213332Battery Maintenance
- 10213330PreMixed long life "FL22" Engine Coolant
- 10213329Engine Start /Stop Procedure with room fuse removed
- 10213326Mazda guidelines for factory scheduled maintenance
- 10213185Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines below to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal.
- 10209778The Mazda DCA-8000 is required for all warranty battery testing. If the Mazda DCA-8000 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code.
- 10209761Accessory instructions can be found on OneMazda under Dealer Resources - Parts & Accessories.
- 10208567Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 10208556Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 10206002Automatic Transmission/Transaxle Cooler and Lines Flushing Procedure: Automatic Transaxle/Transmission (A/T) oil cooler and lines must be power flushed completely before an overhauled or replacement A/T is installed (except SKYACTIV-DRIVE). The most common cause of repeat A/T failures is lack of lubrication to the front and rear planetary gears. This is usually caused by an accumulation of metal particles and debris (from a previous A/T failure) on the internal mesh type baffle of the oil cooler. Power flushing will remove the restriction by back flushing, followed by forward flushing to dislodge a restriction, then back flushing again. This will in turn ensure full ATF flow for the transmission when it is operating.
- 10205994Battery Maintenance: This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.
Every Mazda MAZDA3 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.