2015 Ford Expedition

Recalls

3 recalls name the 2015 Ford Expedition. Newest first.

• Back over prevention › Sensing system › Camera

  Sep 3, 2025NHTSA 25V5720001,456,417 vehicles

  Ford Motor Company (Ford) is recalling certain 2015-2019 Lincoln MKC, Mustang, F-350 SD, F-250 SD, F-450 SD, 2015-2017 Lincoln Navigator, Expedition, 2015-2018 Edge, Transit Connect, 2016-2019 F-550 SD, Transit, 2017-2019 Econoline, and 2019 Ranger vehicles. The rearview camera may display a distorted, inverted, or blank image when the vehicle is in reverse.

  Risk and remedy

  Risk

  A rearview camera that displays an inverted, distorted, or blank image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.

  Remedy

  Dealers will inspect and replace the rearview camera as necessary, free of charge. Owner notification letters were mailed January 13, 2026. Ford owners will receive letters in phases, beginning January 2026 and June 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S89. This recall expands previous NHTSA recall number 25V270. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning September 8, 2025.

  Full recall details →

• Back over prevention › Sensing system › Camera

  Apr 23, 2025NHTSA 25V270000160,729 vehicles

  Ford Motor Company (Ford) is recalling certain 2015 F-250, F-350, F-450, Expedition, Lincoln Navigator, and MKC vehicles. The rearview camera printed circuit board terminal header connector may be loose or damaged, which can result in a blank or distorted image.

  Risk and remedy

  Risk

  A blank or distorted rearview camera image can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.

  Remedy

  Dealers will replace the rearview camera, free of charge. Owner notification letters were mailed October 16, 2025. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 25S42. This recall expands previous recall number 22V-082.

  Full recall details →

• Electrical system › Wiring › Interior/under dash

  Aug 26, 2022NHTSA 22V648000198,482 vehicles

  Ford Motor Company (Ford) is recalling certain 2015-2017 Ford Expedition and Lincoln Navigator vehicles. The front blower motor located behind the glove box may fail.

  Risk and remedy

  Risk

  Front blower motor failure can increase the risk of a vehicle interior fire.

  Remedy

  Dealers will replace the front blower motor assembly, free of charge. Owner notification letters were mailed August 4, 2023. Remedy parts are expected to become available in the second quarter of 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S56.

  Full recall details →

Owner complaints

What owners report most

1. Electrical system45
2. Engine31
3. Power train29
4. Fuel/propulsion system19
5. Unknown or other18
6. Back over prevention17
7. Visibility16
8. Vehicle speed control15
9. Structure9
10. Service brakes8

Latest complaints

• Jun 12, 2026TX
  Power train · Unknown or other
  I am driving a 2015 Ford Expedition that utilizes the 6R80 transmission. I am actively experiencing the severe, dangerous highway downshifting failure described in Ford's F-150 safety recall. The truck is throwing codes P0705, P0706, and P0707. My car will go into limp-mode and lose acceleration…

  I am driving a 2015 Ford Expedition that utilizes the 6R80 transmission. I am actively experiencing the severe, dangerous highway downshifting failure described in Ford's F-150 safety recall. The truck is throwing codes P0705, P0706, and P0707. My car will go into limp-mode and lose acceleration while driving, light up the wrench and stop displaying the gear and idle high and accelerate at half the speed. When I turn my car off, it will not turn back on until the engine has cooled off.

• Mar 10, 2026LA159,722 mi
  Back over prevention
  The contact owns a 2015 Ford Expedition. The contact stated that while reversing, the rearview camera displayed the message "Camera Unavailable - Please Contact Dealer" was displayed. No warning lights were illuminated. The contact received notification of NHTSA Campaign Number: 25V572000 (Back…

  The contact owns a 2015 Ford Expedition. The contact stated that while reversing, the rearview camera displayed the message "Camera Unavailable - Please Contact Dealer" was displayed. No warning lights were illuminated. The contact received notification of NHTSA Campaign Number: 25V572000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The vehicle remained at the residence. A dealer was contacted and asked the contact if another recall letter had been sent. The manufacturer was not notified of the failure. The failure mileage was approximately 159,722.

• Mar 9, 2026NV90,000 mi
  Back over prevention
  The contact owns a 2015 Ford Expedition. The contact received notification of NHTSA Campaign Number: 25V572000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall…

  The contact owns a 2015 Ford Expedition. The contact received notification of NHTSA Campaign Number: 25V572000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while reversing, the message "Back Up Camera Unavailable - Contact Dealer" was displayed. The vehicle was not diagnosed or repaired by an independent mechanic or the dealer. The manufacturer was made aware of the failure but confirmed that parts were not yet available. The failure mileage was approximately 90,000.

• Feb 6, 2026MI
  Power train

  Issue I’m having with my 2015 Ford expedition Limited, is on multiple occasions when I’m at highway speeds my vehicle downshifts and decelerates. While im driving through the city streets, my vehicle downshifts randomly and does not upshift. On these occasions I’ve had to safely pull over and turn my vehicle off and on. Doing so resolves the problem for about 10 miles, and then back to the same issue.

• Feb 3, 2026TN
  Back over prevention

  The contact owns a 2015 Ford Expedition. The contact received notification of NHTSA Campaign Number: 25V270000 (BACK OVER PREVENTION); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.

• Jan 31, 2026SC
  Engine · Power train

  Driving at 58 mph with cruise on, using the cruise - button to reduce speed to 50 the vehicle drastically downshifted causing the engine to over-rev and ultimately caused catastrophic engine failure, a blown engine.

• Jan 27, 2026KS
  Electrical system · Unknown or other

  There is a loud sound coming from behind the glove box when the heater is going. This issue was recalled in 2023 but it has returned.

• Nov 25, 2025CA
  Unknown or other

  When accelerating from a complete stop making a left turn vehicle starting shaking and I could not accelerate. I was not on a safe road to pull out of the roadway. I had to turn the car off and back on again thankfully I was able to safely get the car home but this happened with no warning at all. This could have easily ended in an accident.

• Nov 6, 2025TX115,000 mi
  Back over prevention
  The contact owns a 2015 Ford Expedition. The contact received notification of NHTSA Campaign Number: 25V572000 (Back Over Prevention). The contact stated that while in reverse(R), the camera displayed a black screen with a message "Camera Unavailable - Contact Dealer", and the vehicle hit an…

  The contact owns a 2015 Ford Expedition. The contact received notification of NHTSA Campaign Number: 25V572000 (Back Over Prevention). The contact stated that while in reverse(R), the camera displayed a black screen with a message "Camera Unavailable - Contact Dealer", and the vehicle hit an elderly woman's shopping cart. There were no injuries. The vehicle was taken to a dealer, and the contact was informed that the parts were not yet available. The contact stated that while in reverse(R), the camera displayed a black screen with the message "Camera Unavailable - Contact Dealer", and the vehicle almost struck a toddler walking with his parents behind the vehicle. The vehicle was taken to the same dealer however, parts were still not available. The manufacturer was notified of the failure. The failure mileage was 115,000.

• Nov 4, 2025AZ124,000 mi
  Back over prevention · Electrical system
  The contact owns a 2015 Ford Expedition. The contact received notification of NHTSA Campaign Number: 25V572000 (BACK OVER PREVENTION). However, the part to do the recall repair was not yet available. The contact stated that the rearview camera failed to activate while the vehicle was in reverse(R).…

  The contact owns a 2015 Ford Expedition. The contact received notification of NHTSA Campaign Number: 25V572000 (BACK OVER PREVENTION). However, the part to do the recall repair was not yet available. The contact stated that the rearview camera failed to activate while the vehicle was in reverse(R). The contact stated that the failure obstructed the driver's visibility, which prevented the driver from safely operating the vehicle, especially during hot weather. No warning lights were illuminated. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. The contact stated that on a separate occasion, the contact stated that while the vehicle was stopped at a traffic light or stop sign, the running boards moved independently. Occasionally, while exiting the vehicle, the running boards opened halfway. No warning lights were illuminated. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was approximately 124,000.

• Oct 28, 2025FL100,000 mi
  Back over prevention
  The contact owns a 2015 Ford Expedition. The contact stated that the rearview camera image was distorted while reversing. The contact received notification of NHTSA Campaign Number: 25V270000 (Back Over Prevention). The local dealer was contacted, and an appointment was scheduled for the recall…

  The contact owns a 2015 Ford Expedition. The contact stated that the rearview camera image was distorted while reversing. The contact received notification of NHTSA Campaign Number: 25V270000 (Back Over Prevention). The local dealer was contacted, and an appointment was scheduled for the recall repair; however, the dealer later informed the contact that the part was not yet available to do the recall repair. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was approximately 100,000.

• Oct 25, 2025IN
  Electrical system
  Purchased 12/2023 2015 Ford Expedition April of 2024 we began to have issues with the Sync System and Climate Control. We took it back to the original dealer and a second Ford dealer and neither was able to diagnose the issue. As they could not get it to duplicate while there. However it has…

  Purchased 12/2023 2015 Ford Expedition April of 2024 we began to have issues with the Sync System and Climate Control. We took it back to the original dealer and a second Ford dealer and neither was able to diagnose the issue. As they could not get it to duplicate while there. However it has happened numerous times since. The symptoms seem to have no rhyme or reason as to when they will happen, but they do follow the same pattern each time. The Sync screen will turn itself off completely and randomly. Screen goes Black System shuts down as if the power button was pushed. When you do push the power button to turn the system back on the temperature display in the left hand corner will no longer be displayed. This is the indication the system is still not working properly. The Air Conditioner will then turn itself off. Then the blower will switch to defrost and high heat, all in its own. You cannot adjust the setting or turn the heat off. It continues to blow on high heat in defrost mode until it decides to switch back to AC. This could last 2 seconds could be 20 minutes It will also read the gas gauge wrong, registering 20 miles left of gas even if you just filled up. This has all happened in the summer months causing extreme heat in the vehicle even with all the windows down. We replaced the Blower motor resistor and its wiring harness. Checked the blower at the same time, it is running smoothly. We also replaced the relay #3 responsible for climate control. We attempted the replace the intake manifold temperature sensor, but have been sent the wrong sensor twice, and it does not fit correctly. Now we have a fan running so loudly it sounds like out engine is idling high when it is not. We also now have no heat at all in the vehicle. When I checked the recalls the dates for the 2023 (22S56) are within the recall years but our vin says it's not. Manufactured 9/2014 Recall is for 1/2014-6/2017 No heat in the winter and extreme uncontrollable heat in the summer

• Oct 21, 2025TX
  Unknown or other

  Rear back window blew out spontaneously. If my kids had been in the car it could have injured them with flying glass. No warnings prior. It had not been inspected prior because there had not been an issue before this. This is the second time it has happened in the same vehicle. First time was June 2023 and happened again 10/20/2025.

• Oct 10, 2025MN152,000 mi
  Back over prevention
  The contact owns a 2015 Ford Expedition. The contact stated that while reversing, the back-over prevention camera screen displayed a black screen. The contact stated that because of the failure, the bumper on the rear passenger's side and the passenger's side mirror were damaged. The vehicle was…

  The contact owns a 2015 Ford Expedition. The contact stated that while reversing, the back-over prevention camera screen displayed a black screen. The contact stated that because of the failure, the bumper on the rear passenger's side and the passenger's side mirror were damaged. The vehicle was taken to an independent mechanic; however, the vehicle was not inspected. The contact was advised to take the vehicle to the dealer for assistance. The contact received notification of NHTSA Campaign Number: 25V572000 (Back Over Prevention); however, parts for the recall repair were not yet available. The manufacturer was not made aware of the failure. The failure mileage was approximately 152,000.

• Sep 22, 2025TN
  Electrical system · Engine · Unknown or other
  My 2015 Ford Expedition needs to added to the recall 22S56. I just paid $1,200 to have that part fixed cause it burnt up. Replaced the front blower motor assembly. My husband burnt his hand on the wire exposed under the dash then the mechanic said the blower motor has burnt up the components around…

  My 2015 Ford Expedition needs to added to the recall 22S56. I just paid $1,200 to have that part fixed cause it burnt up. Replaced the front blower motor assembly. My husband burnt his hand on the wire exposed under the dash then the mechanic said the blower motor has burnt up the components around it. The fan, motor, control, and wire assembly all was burnt up. Ford needs to be made to include my vehicle in their recall as that vehicle year, model, plant made in and date made all match.

• Sep 3, 2025PA
  Back over prevention › Rearview system braking · Electrical system
  Rear backup camera works periodically, there is a recall on the 2015 Expedition for this problem, but I’m being told my vehicle (VIN) is not included. The repair cost is over $1000. Why ins’t my Expedition included in the recall - I’m having the exact problem as documented in the recall. How many…

  Rear backup camera works periodically, there is a recall on the 2015 Expedition for this problem, but I’m being told my vehicle (VIN) is not included. The repair cost is over $1000. Why ins’t my Expedition included in the recall - I’m having the exact problem as documented in the recall. How many others are being affected by this problem but being excluded in the recall. Please investigate, this problem seems to be larger then the current recall.

• Sep 2, 2025PA
  Back over prevention › Rearview system braking · Lane departure › Blind spot detection · Unknown or other
  Back-up Camera, the BACK OVER PREVENTION: SENSING SYSTEM: CAMERA only works intermittently. I'm being told me vehicle is not part of the current recall in the 2015 Expedition that was issued in April 2025, yet my vehicle (a 2015 Expedition) is experiencing the problems detailed in the recall. Why…

  Back-up Camera, the BACK OVER PREVENTION: SENSING SYSTEM: CAMERA only works intermittently. I'm being told me vehicle is not part of the current recall in the 2015 Expedition that was issued in April 2025, yet my vehicle (a 2015 Expedition) is experiencing the problems detailed in the recall. Why isn't my vehicle part of this recall, shouldn't the recall be expanded to all 2015 Expeditions experiencing problems with faulty back-up cameras?

• Aug 27, 2025TX
  Electrical system
  Current recall reference# 22S56 front blower motor on some 2015–2017 Expedition SUVs and have issued a recall for affected vehicles. The front blower motor in certain vehicles may experience overheating and risk of interior fire. So my vehicle has gone thru 2 fixes for recall. But the issue…

  Current recall reference# 22S56 front blower motor on some 2015–2017 Expedition SUVs and have issued a recall for affected vehicles. The front blower motor in certain vehicles may experience overheating and risk of interior fire. So my vehicle has gone thru 2 fixes for recall. But the issue caused by the blower motor was the actual risk of fire were the Wiring Harness. Which were burnt and original from the first repair that were already defaulted. So brand new motor and modular install but no new wiring harness that are already burnt. They just went ahead and plugged them back in with notice or even a heads up that you are still in danger of potential fire

• Jul 2, 2025TN122,000 mi
  Back over prevention
  The contact owns a 2015 Ford Expedition. The contact stated while parked occupied in the vehicle or while attempting to reverse the vehicle the rearview camera failed to display an image. The message contact your ford dealer for service illuminated. A dealer was contacted. The vehicle was taken to…

  The contact owns a 2015 Ford Expedition. The contact stated while parked occupied in the vehicle or while attempting to reverse the vehicle the rearview camera failed to display an image. The message contact your ford dealer for service illuminated. A dealer was contacted. The vehicle was taken to a dealer where it was diagnosed that rearview needed to be replaced; however, they informed her that her vin was not included in the recall. The vehicle was not repaired. The contact was relating the failure to NHTSA Campaign Number: 25V270000(BACK OVER PREVENTION); however, the VIN was not included in the recall. The manufacturer was notified they informed her that the vin was not included in the recall and opened a case. The contact was referred to the NHTSA Hotline for assistance. The failure mileage was 122,000.

• Jun 20, 2025AR118,000 mi
  Back over prevention
  The contact owns a 2015 Ford Expedition. The contact stated that while reversing, the back over prevention camera system displayed a black screen and failed to function as intended. The contact stated that occasionally, the back-over prevention camera system displayed a fuzzy green display. The…

  The contact owns a 2015 Ford Expedition. The contact stated that while reversing, the back over prevention camera system displayed a black screen and failed to function as intended. The contact stated that occasionally, the back-over prevention camera system displayed a fuzzy green display. The vehicle was not diagnosed or repaired by an independent mechanic or the dealer. The dealer was made aware of the failure but provided no assistance. The contact was informed that parts were not yet available. The contact received notification of NHTSA Campaign Number: 25V270000 (Back Over Prevention); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure; however, was unable to confirm when parts would be available. The failure mileage was 118,000. VIN tool confirms parts not available.

• Jun 19, 2025RI
  Power train

  Vehicle will shift in and out of gears randomly while driving I’m concerned about driving on the highway and getting into or causing an accident because it happens at random and then stops No lights on dashboard and vehicle just passed inspection I believe it is a problem with the TCM and there has been an extended warranty issues for the same part in different models for ford including the fiesta and focus I believe

• May 27, 2025FL92,000 mi
  Back over prevention
  The contact owns a 2015 Ford Expedition. The contact stated that while reversing, the back-over prevention camera failed to function as intended. The contact stated that the back-over prevention camera had displayed a black screen. The dealer was made aware of the failure. The vehicle was not…

  The contact owns a 2015 Ford Expedition. The contact stated that while reversing, the back-over prevention camera failed to function as intended. The contact stated that the back-over prevention camera had displayed a black screen. The dealer was made aware of the failure. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was made aware of the failure. The contact referenced an unknown recall repair; however, the VIN was not included. The contact was advised to contact the NHTSA Hotline to report the failure. The failure mileage was approximately 92,000.

• May 16, 2025CO70,000 mi
  Back over prevention
  The contact owns a 2015 Ford Expedition. The contact received NHTSA Campaign Number: 25V270000 (BACK OVER PREVENTION); however, the part to do the recall repair was not yet available. The contact stated that while driving at an undisclosed speed, the rearview camera displayed the vehicles in the…

  The contact owns a 2015 Ford Expedition. The contact received NHTSA Campaign Number: 25V270000 (BACK OVER PREVENTION); however, the part to do the recall repair was not yet available. The contact stated that while driving at an undisclosed speed, the rearview camera displayed the vehicles in the rear and not the vehicles in front. No warning lights were illuminated. The local dealer was contacted. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was approximately 70,000. VIN tool confirms parts not available.

• May 14, 2025LA
  Engine and engine cooling › Exhaust system › Emission control › Catalytic convertor
  The contact owns a 2015 Ford Expedition. The contact stated while the vehicle was parked, the check engine warning light illuminated. The vehicle was taken to a dealer where it was diagnosed and determined that the catalytic converter needed to be replaced. The contact researched and was made aware…

  The contact owns a 2015 Ford Expedition. The contact stated while the vehicle was parked, the check engine warning light illuminated. The vehicle was taken to a dealer where it was diagnosed and determined that the catalytic converter needed to be replaced. The contact researched and was made aware of an unknown recall; however, the VIN was not included. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was unknown.

• Apr 14, 2025MN132,000 mi
  Engine
  The contact owns a 2015 Ford Expedition. The contact stated while attempting to drive from being stationary, the vehicle hesitated and stalled. The vehicle was towed to an independent mechanic, where it was diagnosed and determined that the engine needed to be replaced or rebuilt. The contact…

  The contact owns a 2015 Ford Expedition. The contact stated while attempting to drive from being stationary, the vehicle hesitated and stalled. The vehicle was towed to an independent mechanic, where it was diagnosed and determined that the engine needed to be replaced or rebuilt. The contact stated that the timing chain had been replaced on two separate occasions. The vehicle was not repaired. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline to report the failure. The approximate failure mileage was 132,000.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11008948While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions. While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions.
• 11005305This article supersedes TSB 22-2219 to update the Parts List and Service Procedure to clarify applicable steps by vehicle application. Some 2003-2020 Expedition/Navigator and 2006-2020 F-150 (non-Raptor) vehicles equipped with 4WD may exhibit grinding/clicking/ratcheting noise from the front wheel area. This may be due to partial engagement of the integrated wheel ends (IWE). To correct this condition, follow the Service Procedure to remove and cap the vacuum supply line or to reprogram the transfer case control module (TCCM) and replace any worn vacuum and/or IWE components.
• 10254138All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
• 10251934During service and repair requiring removal and replacement of a crankshaft bolt and/or crankshaft damper, achieving proper torque of the crankshaft pulley bolt is critical. Incorrect torque may allow the bolt to loosen resulting in the timing gear breaking and engine damage. Replacement of the bolt is critical to the repair and accurately following the installation procedure in the Workshop Manual (WSM) Section, 303-01 is extremely important. The bolt torque procedure can be found in the crankshaft front seal removal and installation procedure or in the engine assembly procedure.
• 10235153For 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identification number (VIN) from a different vehicle. Most modules on these affected vehicles are VIN/vehicle specific and hardware variations between modules do exist. Swapping a module from a vehicle or ordering a module using a different vehicle/VIN can cause ineffective repairs and additional vehicle down time. Make sure all appropriate Workshop Manual (WSM) procedures are followed when diagnosing the condition prior to all module replacements and only order modules using the correct VIN.
• 10214754Some 2003-2020 Expedition/Navigator and 2006-2020 F-150 (non-Raptor) vehicles equipped with 4WD may exhibit grinding/clicking/ratcheting noise from the front wheel area. This may be due to partial engagement of the integrated wheel ends (IWE). To correct this condition, follow the Service Procedure to remove and cap the vacuum supply line or to reprogram the transfer case control module (TCCM) and replace any worn vacuum and/or IWE components.
• 10205031Touchscreen navigation system - arabic language - blank screen
• 10204988Illuminated MIL with DTC P0087 - Built on or before 07/17/2015 This artt icle supersedes TSB 15-0184 to update the Part List.
• 1020498749 CFR Part 579.5 Monthly Communications - March 2016 Air bag warning light illuminated with diagnostic trouble code (DTC) B141B and/or B141C
• 1020498649 CFR Part 579.5 Monthly Communications - January 2016
• 10201050Some 2015-2021 Ford and Lincoln vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTC) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. This may be due to small debris causing the VCT solenoid to stick. Before attempting any component diagnosis or replacement of the VCT solenoid, refer to Powertrain Control and Emissions Diagnosis (PC/ED) pinpoint test HK12 to cycle the affected VCT solenoid 10 times to attempt to clear the debris. For claiming, use causal part 6M280 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
• 10194428Some 2015-2021 Ford and Lincoln vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTC) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. This may be due to small debris causing the VCT solenoid to stick. Before attempting any component diagnosis or replacement of the VCT solenoid, refer to Powertrain Control and Emissions Diagnosis (PC/ED) pinpoint test HK11 to cycle the affected VCT solenoid 10 times to attempt to clear the debris. For claiming, use causal part 6M280 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
• 10183767Some 2012-2016 vehicles equipped with a touchscreen navigation system and the language set to Arabic may exhibit a blank screen. This may be the result of the ribbon cables not being fully seated inside the front display interface module (FDIM) or an improper software configuration of the FDIM.
• 10183749In some of the affected vehicles, the front control/display interface module (FCDIM) may have been unintentionally programmed for the European market instead of the North American market
• 10181917Some 2003-2020 Expedition/Navigator and 2006-2020 F-150 vehicles equipped with TOD transfer cases may exhibit grinding/clicking/ratcheting noise from the front wheel area. This may be due to partial engagement of the integrated wheel ends (IWE). To correct this condition, follow the Service Procedure steps to remove and cap the vacuum supply line.
• 10180428Some 2009-2020 Ford and Lincoln vehicles equipped with turbochargers may exhibit an oil leak from the turbocharger oil supply or return tubes, O-rings or 6.7L pedestal gasket. Although oil may collect on the turbocharger, it is very rare for a turbocharger to leak oil. To isolate the source of the leak, refer to Workshop Manual (WSM), Section 303-00 General Information > Diagnosis and Testing > Engine > Engine Oil Leaks - Fluorescent Oil Additive Method procedure. When an oil leak is present at a turbocharger oil supply or drain tube, remove the affected oil tube and inspect for damage, and replace the O-ring seals, pedestal gasket or oil tube as required. Refer to WSM, Section 303-04. For claiming, use the affected oil tube or pedestal gasket as the causal part and applicable labor operations in Sections 6 and 9 of the Service Labor Time Standards (SLTS) Manual.
• 10177863This article supersedes TSB 19-2026 to update the vehicle model years affected. Some 2000 and newer Ford/Lincoln/Mercury vehicles equipped with aluminum body panels may exhibit corrosion concerns appearing as bubbled and/or peeling paint with or without accompanying white dust. Panel replacement is recommended.
• 10176835This article supersedes TSB 20-2028 to update the description of Labor Operation D. Some 2013-2018 F-150/Expedition/Navigator vehicles equipped with 4-wheel drive (4WD) may exhibit an intermittent grinding noise while driving in 2-wheel drive (2WD) mode most commonly on acceleration. This may be due to a loss of vacuum to the integrated wheel end (IWE) actuators and/or wear of the IWE components. To correct the condition, follow the Service Procedure steps to reprogram the transfer case control module (TCCM) and replace any worn vacuum and/or IWE components.
• 10172972SSM 48619 - Various Vehicles - Perimeter Alarm Armed And Original Vehicle Keys Cannot Be Accessed to Enter Vehicle - CAN Protection Strategy Some 2013-2016 Model Year Vehicles may exhibit a concern in which the Perimeter Alarm is active and the original keys cannot be accessed to disable the perimeter alarm. This concern would most often occur when a customer loses keys and the dealership is attempting to program new keys to the vehicle. The Workshop Manual (WSM), Section 419-01A Perimeter Anti-Theft Alarm - System Operation and Component Description has been updated to inform of the Controller Area Network (CAN) Protection Strategy. Follow the procedure outlined to prevent replacement of the Body Control Module (BCM) on CAN Protection Strategy equipped vehicles when original keys are lost and perimeter alarm is active. Refer to the WSM for further detail on the CAN Protection Strategy. Lost keys and replacement of BCM for lost keys is non-warrantable.
• 10171859Some 2013-2018 F-150/Expedition/Navigator vehicles equipped with 4-wheel drive (4WD) may exhibit an intermittent grinding noise while driving in 2-wheel drive (2WD) mode most commonly on acceleration. This may be due to a loss of vacuum to the integrated wheel end (IWE) actuators and/or wear of the IWE components. To correct the condition, follow the Service Procedure steps to reprogram the transfer case control module (TCCM) and replace any worn vacuum and/or IWE components.
• 10170914Some 2013-2018 F-150/Expedition/Navigator vehicles equipped with 4-wheel drive (4WD) may exhibit an intermittent grinding noise while driving in 2-wheel drive (2WD) mode most commonly on acceleration. This may be due to a loss of vacuum to the integrated wheel end (IWE) actuators and/or wear of the IWE components. To correct the condition, follow the Service Procedure steps to reprogram the transfer case control module (TCCM) and replace any worn vacuum and/or IWE components.
• 10169986Some 2015-2020 Ford and Lincoln vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. This may be due to small debris causing the VCT solenoid to stick. Before attempting any component diagnosis or replacement of the VCT solenoid, refer to Powertrain Control and Emissions Diagnosis (PC/ED) pinpoint test HK11 to cycle the affected VCT solenoid 10 times to attempt to clear the debris. For claiming, use causal part 6M280 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
• 10164508Some 2010-2020 vehicles may exhibit distorted glass with a subtle orange peel pattern or streaking etched into the surface. This is caused by hydrofluoric acid which is used in some car wash solutions as a cleaning agent. Hydrofluoric acid can attack the glass and cause visual distortion and/or discoloration on the outer surface which cannot be removed by further cleaning. If this type of distortion is found, inspect the area of the glass that is covered by the cowl and/or molding. The portion of glass that is covered by the cowl or molding will not be affected by the acid. Hydrofluoric acid damage is not a defect in material or workmanship and is not a warrantable condition.
• 10164497For Ford and Lincoln vehicles that require positive or negative battery terminal replacement, it is not necessary to replace the complete battery cable harness (14300 and 14301) for this concern. Positive battery cable clamp BT4Z-14450-AA and negative battery cable clamp BT4Z-14450-BA are available for this type of repair. Do not cut or shorten the battery cable, instead carefully remove the affected battery cable clamp and clean the cable end as necessary to preserve wire length. Some rework may be necessary for some vehicle environments. Bend the new positive battery cable clamp as needed and crimp it to the existing battery cable. Make sure to use heat shrink tubing over the battery cable to battery cable clamp connection. Obtain the heat shrink tube locally.
• 10164426Some 2013-2018 F-150/Expedition/Navigator vehicles equipped with four wheel drive (4WD) may exhibit an intermittent grinding noise while driving in two wheel drive (2WD) mode most commonly on acceleration. This may be due to a loss of vacuum to the integrated wheel end (IWE) actuators and/or wear of the IWE components. To correct the condition, follow the Service Procedure steps to replace the worn vacuum and/or IWE components.
• 10163591Some 2015-2017 Expedition/Navigator front and rear bumper parking aid sensor harnesses FL7Z-15K867-A and BL7Z-15K868-A are currently not available. It is recommended that dealers repair or rebuild these harnesses until harnesses become available. For harness FL7Z-15K867-A, use 9U2Z-14S411-CC pigtail kits for C1428, C1429, C1430, and C1431 (front parking sensor connectors), use CU2Z-14S411-MA pigtail kits for C1322, C1323, C1750 and C1751 (fog lights and DRLs), and CU2Z-14S411-ADA for C110 (bumper-to-body harness). For the BL7Z-15K868-A harness, use 9U2Z-14S411-CC pigtail kits for C4009, C4010, C4011, and C4012 (rear parking sensors), use FU2Z-14S411-DB for C494 (bumper-to-body harness). For unused/open cavities, cut the pigtail wire 1" from the connector and use heat shrink to seal the wire to prevent water entry.
• 10163573Some 2009-2017 Expedition/Navigator, 2009-2014 F-150/Mustang, 2008-2009 Sable, 2008-2019 Taurus/Flex/MKT, 2013-2019 Police Interceptor Sedan/Utility, and 2011-2019 Explorer vehicles may exhibit inoperative or intermittent HVAC blower motor function at various fan speed settings. This may be due to a poor electrical connection at the blower motor speed control. If the blower motor speed control is determined to be the causal part, replacement of the electrical connector pigtail harness (14S411) to the blower motor speed control is also recommended to avoid repeat repairs. Use pigtail harness service part numbers 3U2Z-14S411-ZEA or CU2Z-14S411-FA, as both parts are interchangeable. Refer to Wiring Diagram, Cell 5 for recommended splicing procedures.
• 10160931On vehicles equipped with an automatic transmission it is imperative that the converter pilot hub be greased with Motorcraft Multi-Purpose Grease Spray XL-5-A even if grease was not applied from the factory. Also verify that the engine/transmission alignment dowel pins are present as well as the engine crankshaft dowel pin, if equipped, when installing the transmission. Failure to adequately lubricate the converter hub greatly increases the likelihood of the flexplate cracking in the future. Missing dowels may cause a misalignment issue also resulting in a premature failure. Refer to Workshop Manual (WSM), Section 307-01.
• 10159494SSM 47948 - 2010-2019 Various Vehicles - Turbocharged Engines - Oil Supply Filter Replacement When Replacing The Turbocharger Or The Turbocharger Oil Supply Tube For 2010-2019 vehicles equipped with turbocharged engines, when diagnosing and/or replacing turbo related concerns, all steps within the Workshop Manual (WSM) procedure must be followed including replacement of all mandatory discarded parts. When specified in the WSM, the turbocharger oil supply filter must be replaced whenever the turbocharger or the turbocharger oil supply tube are replaced. Turbocharger bearing failure may occur if oil starvation occurs due to a restricted filter.
• 10159489Some 2013-2019 vehicles equipped with a EVDC air conditioning (A/C) compressor may exhibit poor A/C performance/improper climate function and/or a diagnostic trouble code (DTC) P06A0 in the powertrain control module (PCM). To support the proper diagnosis of this compressor, the EVDC control valve tester has been developed and is available from Rotunda (339-EVDC100). A tester has been provided to each U.S. dealership free of charge with shipments completed 19-Apr-2019 (reference EFC07013 on FMCDealer.com). This tester will help reduce the potential for misdiagnosis and unnecessary compressor replacement. Make sure that this tester is used for warranty repairs and document the test results in the Technician Comments field. Refer to the Rotunda catalog for a video and user manual which provide detailed operating instructions.
• 10156887Some 2015-2017 vehicles may experience a no crank concern due to a security access key table error. When attempting to program keys or perform a parameter reset, the procedure may fail and the Integrated Diagnostic System (IDS) scan tool may display an error 232: Key Table Not Allocated. If this error message is encountered, the Body Control Module (BCM) is internally faulted and requires replacement. For claiming, use causal part 15604 and applicable labor operations in section 10 of the Service Labor Times Standards (SLTS) manual.
• 10156877Some 2009-2017 Expedition/Navigator, 2009-2014 F-150/Mustang, 2008-2009 Sable, 2008-2019 Taurus/Flex/MKT, 2013-2019 Police Interceptor Sedan/Utility, and 2011-2019 Explorer vehicles may exhibit inoperative or intermittent HVAC blower motor function at various fan speed settings. This may be due to a poor electrical connection at the blower motor speed control. If the blower motor speed control is determined to be the causal part, replacement of the electrical connector pigtail harness (14S411) to the blower motor speed control is also recommended to avoid repeat repairs. Refer to Wiring Diagram, Cell 5 for recommended splicing procedures. Refer to Wiring Diagram, Cells 54/55 to obtain the service pigtail connector part number.
• 10156863Some 2000 and newer Ford, Lincoln and Mercury vehicles equipped with aluminum body panels may exhibit corrosion concerns appearing as bubbled and/or peeling paint with or without accompanying white dust. Panel replacement is recommended. Follow the Service Procedure steps to correct the condition
• 10155575Some 2015-2017 vehicles may experience a no crank concern due to a security access key table error. When attempting to program keys or perform a parameter reset, the procedure may fail and the Integrated Diagnostic System (IDS) scan tool may display an error 232: Key Table Not Allocated. If this error message is encountered, the Body Control Module (BCM) is internally faulted and requires replacement. For claiming, use causal part 15604 and applicable labor operations in section 10 of the Service Labor Times Standards (SLTS) manual.
• 10155565Some 2009-2017 Expedition/Navigator, 2009-2014 F-150/Mustang, 2008-2009 Sable, 2008-2019 Taurus/Flex/MKT, 2013-2019 Police Interceptor Sedan/Utility, and 2011-2019 Explorer vehicles may exhibit inoperative or intermittent HVAC blower motor function at various fan speed settings. This may be due to a poor electrical connection at the blower motor speed control. If the blower motor speed control is determined to be the causal part, replacement of the electrical connector pigtail harness (14S411) to the blower motor speed control is also recommended to avoid repeat repairs. Refer to Wiring Diagram, Cell 5 for recommended splicing procedures. Refer to Wiring Diagram, Cells 54/55 to obtain the service pigtail connector part number.
• 10155551Some 2000 and newer Ford, Lincoln and Mercury vehicles equipped with aluminum body panels may exhibit corrosion concerns appearing as bubbled and/or peeling paint with or without accompanying white dust. Panel replacement is recommended. Follow the Service Procedure steps to correct the condition
• 10153969Some 2012-2019 Vehicles may require repairs to the Smartlink system. Smartlink is a Ford Licensed Accessory which has a warranty provided by the accessory manufacturer. Warranty replacement parts for Smartlink that are ordered through Ford are not reimbursable through the Ford Motor Company warranty system. Please see the Warranty and Policy Manual for further information on Ford Licensed Accessories.
• 10152473For 2010-2019 vehicles equipped with turbocharged engines, when diagnosing and/or replacing turbo related concerns, all steps within the Workshop Manual (WSM) procedure must be followed including replacement of all mandatory discarded parts. For all turbocharged engine applications, the turbocharger oil supply filter (6C683 gas engine/6L625 connector style or 6A968 diesel engine) must be replaced whenever the turbocharger or the turbocharger oil supply tube are replaced. Turbocharger bearing failure may occur if oil starvation occurs due to a restricted filter.
• 10149748Some 2013-2018 F-150/Expedition/Navigator vehicles may exhibit an intermittent grinding noise coming from the right or left IWE area in 2WD mode. Follow the Service Procedure steps to correct the condition.
• 10143109Some 2013-2018 F-150, 2015-2018 Transit/Expedition, and 2015-2017 Navigator vehicles equipped with a 3.5L EcoBoost engine with greater than 20,000 miles may exhibit a tick type noise from the cylinder block area. This noise may be caused by a cracked piston skirt. The noise can be isolated to a cylinder using a stethoscope or other suitable listening device. Canceling the affected cylinder will reduce or eliminate the noise. If the noise is isolated to a specific cylinder, it is recommended to replace the short block. If the noise cannot be isolated using the methods described, refer to the Workshop Manual (WSM) for diagnosis. A cracked piston skirt does not result in metal contamination of the engine or any related cylinder head damage. Prior approval for short block replacement is not required under new vehicle limited warranty coverage.

Every Ford Expedition model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.