1999 Toyota Tacoma
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Tacoma › 1999
These records cover every 1999 Toyota Tacoma. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
5 recalls name the 1999 Toyota Tacoma. Newest first.
Dope, inc. IS recalling 42,540 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain…
Risk and remedy
Risk
Decreased lighting visibility may result in a vehicle crash.
Remedy
Dope, inc. Will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on july 28, 2009. owners may contact dope, inc. At 1-626-272-1798.
Sabersport IS recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain…
Risk and remedy
Risk
Decreased lighting visibility may result in a vehicle crash.
Remedy
Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
Certain ck motorsports combination headlights, clear corner, bumper, and side marker lights sold as replacement lamps for use on the passenger vehicles listed above. some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
Risk and remedy
Risk
Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.
Remedy
Ck motorsport will notify owners and replace the noncompliant lamps free of charge. the recall began on july 1, 2006. owners may contact ck motorsport at 1-909-610-7211.
Certain pro-a motors corner lamps, turn signals, and headlights sold as replacement lamps for use on certain passenger vehicles listed above. some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
Risk and remedy
Risk
Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.
Remedy
Pro-a motors will notify owners and offer to repurchase the lamps. the recall began on april 3, 2006. owners may contact pro-a motors at 323-838-2988.
Equipment description: this recall IS for trailer towing wire harness converters installed by dealers or for installation on 1999-2000 toyota tundra and tacoma vehicles. the connectors integrate the vehicle's tail lights, brake lights, and turn signal lights with those equipped on the trailer, are defective. affected part numbers are: pt207-34000…
Risk and remedy
Risk
An electrical short or open circuit can cause a fault in the converter and a non-operational condition of the trailer lights. if the vehicle IS driven without trailer lights, it may be difficult for other drivers to see the trailer, increasing the risk of a crash.
Remedy
Dealers will notify the customers and install a redesigned trailer towing wire harness converter free of charge. owner notification began august 27, 2001. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact toyota at 1-800-331-4331.
Owner complaints
249 complaints40 involved a crash1 involved a fire28 injuries
What owners report most
Latest complaints
- Structure › Frame and members › Underbody shields
The contact owns a 1999 Toyota Tacoma. The contact stated that while driving at an undisclosed speed, the vehicle was not driving smoothly. The vehicle was driven to the residence. The contact stated that while disconnecting the trailer hitch, the contact proceeded to inspect the vehicle. The…
The contact owns a 1999 Toyota Tacoma. The contact stated that while driving at an undisclosed speed, the vehicle was not driving smoothly. The vehicle was driven to the residence. The contact stated that while disconnecting the trailer hitch, the contact proceeded to inspect the vehicle. The contact stated that the undercarriage was severely corroded. The vehicle was not diagnosed or repaired by an independent mechanic or the dealer. The manufacturer was made aware of the failure but provided no assistance. The failure mileage was approximately 103,000.
- Structure › Body · Suspension · Unknown or other
Hi, i had the recall preventive performed by toyota for rusting and corrosion of the frame. Now, the vehicle is rusting throughout the frame and is very very unsafe to drive. TOYOTA is claiming that it was a program and not a recall and had no documentation to prove. Toyota performed the recall and now the frame is still at risk to crack and very unsafe.
- Structure › Frame and members · Suspension
The contact owns a 1999 Toyota Tacoma. The contact stated while driving at various speeds, an unknown popping sound was coming from the rear-end of the vehicle. Upon inspection, the contact discovered severe corrosion and a crack that had formed on the rear passenger’s side fender. Neither the dealer nor the manufacturer was notified of the failure. The vehicle was not repaired. The failure mileage was 147,813.
- Air bags · Fuel/propulsion system · Service brakes
I went to aguadilla and hormigueros dealers, but they don't want to make a job . Don't bring me a service.
- Air bags
My 1999 Toyota Tacoma was involved in a rear end vehicle collision (the front of my vehicle struck the rear of a vehicle traveling in front of me) at a speed of approximately 40-45 mph. The roadway surface was smooth asphalt at a slight downgrade during clear/dry weather conditions on Monday…
My 1999 Toyota Tacoma was involved in a rear end vehicle collision (the front of my vehicle struck the rear of a vehicle traveling in front of me) at a speed of approximately 40-45 mph. The roadway surface was smooth asphalt at a slight downgrade during clear/dry weather conditions on Monday 7/19/2021 at approximately 2:40 p.m. in Wythe County, VA. Neither the driver side nor passenger airbags deployed in this collision and the passenger side airbag switch was in the "ON" position. The front end damage was considerable to include destruction of front grille with radiator and other components pushed well into the engine compartment, hood, quarter panels, windshield cracked, and right front wheel joint assembly nearly detached. *Vehicle is available for inspection. *Complete failure of airbag deployment. *No indication of any airbag system issues with this vehicle. *Vehicle component has not been inspected by anyone since collision date. *No warning lamps or indicators prior to collision date. *I am the original and only owner of this vehicle since the purchase date in January, 1999. *Vehicle has 329000+ miles with certain parts of the engine being rebuilt in 2017 and prior to collision vehicle was in very good shape.
- Suspension
Frame rusting from inside out. Vehicle has been in same family since purchased new in 2000 and no recall notice was ever received. Rest of vehicle is in GREAT shape.
- Unknown or other
The Toyota Tacoma 1999 has a complete damaged , rusted, broken frame which is dangerous. I took the car to the dealer and they said the recall for the frame is already expired and they will not accept it, what could i do to resolve this issue. Thank You
- Unknown or other
Within the last 6 months my frame IS rusting out have never had a problem with them until now I was they had extended a recall of repair or purchase vehicle 15 years but my frame has been good up until these last 6 months I have called a toyota dealer ship can't get any…
Within the last 6 months my frame IS rusting out have never had a problem with them until now I was they had extended a recall of repair or purchase vehicle 15 years but my frame has been good up until these last 6 months I have called a toyota dealer ship can't get any help it looks like something could be done because during the time of the recall this truck had no problems and now the frame IS rusting out from under it so could somebody help me with this
- Unknown or other
Rusted frame. *tr
- Structure › Body · Suspension › Front › Springs › Leaf spring assembly
TL* the contact owns a 1999 toyota tacoma. The vehicle was taken to be state inspected, but it did not pass due to severe rust under the bed of the vehicle. The contact was informed that the leaf springs were rusted and needed a new frame. The vehicle was not taken to the dealer for diagnostic…
TL* the contact owns a 1999 toyota tacoma. The vehicle was taken to be state inspected, but it did not pass due to severe rust under the bed of the vehicle. The contact was informed that the leaf springs were rusted and needed a new frame. The vehicle was not taken to the dealer for diagnostic testing. The manufacturer was notified of the failure. The vehicle was not repaired. The approximate failure mileage was 150,000.
- Unknown or other
In the summer of 2016 I had noticed a long strip of metal hanging below my 1999 toyota tacoma. It turned out to be a part of the frame. after a more thorough investigation I had found the whole frame rusted. then through research deemed it not safe to drive. in 2009 , after hearing from a…
In the summer of 2016 I had noticed a long strip of metal hanging below my 1999 toyota tacoma. It turned out to be a part of the frame. after a more thorough investigation I had found the whole frame rusted. then through research deemed it not safe to drive. in 2009 , after hearing from a friend(not toyota), of an frame rust issue I made an appointment for an inspection at the dealer and was told it was good with no recommendation to replace nor treat . I left thinking I had a good one (frame) that wasn't affected by the rust problem. fast forward to 2016 when obvious signs of the issue become present and then find out there was a 15 year window to have the frame replaced, treated or bought back. this was not my daily driver but depended on frequently for hauling and projects. So here it sits going on three years still not knowing what to do with it. it runs great and too nice to scrap. And probably to costly to fix. a buy back would be the best resolution
- Structure › Frame and members · Trailer hitches
TL* the contact owns a 1999 toyota tacoma. The contact stated that the vehicle was included in nhtsa campaign number: 01e041000 (trailer hitches). The manufacturer had not sent a recall notification. The vehicle was purchased from an independent source who did not mention if the vehicle was…
TL* the contact owns a 1999 toyota tacoma. The contact stated that the vehicle was included in nhtsa campaign number: 01e041000 (trailer hitches). The manufacturer had not sent a recall notification. The vehicle was purchased from an independent source who did not mention if the vehicle was inspected before it was sold. The contact was not informed of the vehicle's extensive rust, corrosion, and holes pertaining to the frame until after it was purchased. The dealer was not contacted. The manufacturer issued 14 technical service bulletins regarding the structure. The manufacturer was contacted to determine if the recall remedy would still apply. The contact was waiting on their response. The vehicle was not repaired. The approximate failure mileage was 103,000.
- Structure › Frame and members
TL* the contact owns a 1999 toyota tacoma. The contact stated that the frame was deteriorated and rusted. There were no warning indicators illuminated. The vehicle was taken to an independent mechanic who stated that the vehicle was not able to be repaired due to the frame. The contact researched…
TL* the contact owns a 1999 toyota tacoma. The contact stated that the frame was deteriorated and rusted. There were no warning indicators illuminated. The vehicle was taken to an independent mechanic who stated that the vehicle was not able to be repaired due to the frame. The contact researched and found that the vehicle was not included in a warranty. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was contacted and stated that the fifteen year warranty for the frame had expired. No further assistance was provided. The failure mileage was 164,603.
- Structure › Body · Suspension
TL* the contact owns a 1999 toyota tacoma. While driving 20 mph over a bump in the road, the contact heard a loud abnormal noise coming from the vehicle. Upon inspecting the vehicle, the contact noticed that the rear shock absorber fractured and that there was a hole in the frame. Del toyota (2945…
TL* the contact owns a 1999 toyota tacoma. While driving 20 mph over a bump in the road, the contact heard a loud abnormal noise coming from the vehicle. Upon inspecting the vehicle, the contact noticed that the rear shock absorber fractured and that there was a hole in the frame. Del toyota (2945 lincoln hwy e, thorndale, pa 19372, (610) 383-6200) was contacted and stated that the vehicle was sold as IS without further assistance. The vehicle was not taken to the dealer for diagnostic testing or repairs. The manufacturer was made aware of the failure. The failure mileage was 83,000.
- Vehicle speed control
While driving approximately 35 mph the I applied pressure to the brake pedal and the vehicle accelerated.
- Structure › Body
Frame perforated due to rust, unsafe to drive.
- Exterior lighting · Structure › Body
The body IS totally rust and broken. IS unsafe to drive. I am the third owner
- Unknown or other
Takata recall vehicle was recalled for frame corrosion and was taken to dealer and inspected 11/21/11 and results was said to be ok. vehicle was taken for yearly inspection 5/29/18 and was rejected for corrosion which IS almost completely through the frame.
- Power train · Structure › Body · Suspension
Bought 99 toyota tacoma truck.verified with dealer who did the frame exam in 2014 for rust. At 207000 miles. It passed imspectiom in 2014??? Now 4 yrs later and 18000 additional miles, it's rusted in half?
- Structure › Body
99 toyota frame IS rusted through when carfax report specifically listed a toyota dealer checked same vehicle for frame rust in 2014 with 207000 miles on it. It passed if that's what u want to call it. Now in 2018 with an additional 15,000 miles on it, it has rusted through.
- Power train
Premature failure of drive shaft universal joints at 160,000 miles
- Structure › Body
Frame rusted out, causing the body to drop and a bolt to settle on my gas tank, resulting in a fuel leak. Needs a new frame to fix.
- Suspension
In ma you need to have an annual vehicle inspection. I went for that inspection and was told that they could not pass the truck because of a severely rusted frame. I went to the dealer who sold me the vehicle and was told to either agree to pay for a frame replacement or junk the truck. I can't drive the vehicle without a valid inspection.
- Structure › Frame and members
TL* the contact owns a 1999 toyota tacoma. The contact stated during state inspection they were made aware of the vehicle's frame having severe corrosion. The sullivan brothers toyota located in kingston, ma was contacted where it was confirmed the frame needed to be replaced. The contact declined…
TL* the contact owns a 1999 toyota tacoma. The contact stated during state inspection they were made aware of the vehicle's frame having severe corrosion. The sullivan brothers toyota located in kingston, ma was contacted where it was confirmed the frame needed to be replaced. The contact declined replacement due to the cost of the repair. The manufacturer was not made aware of the failure. The failure mileage was approximately 86,600. Updated 10/12/17*lj *tr
- Structure › Body
When I changed the oil in march, I noticed a huge hole on the inside of the left frame member, next to the gas tank. I then checked the right side, and found a long line of rusted through holes along the bottom of that frame member. I feel this IS a major safety defect by the oem's selection of steel grades.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10197476Replacement vin plates.
- 10197473Product general information.
- 10190460Toyota Safety Recall and Service Campaign - Technician Certification Requirements
- 10190453TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10188913TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2021 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10187241TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10186195TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10174891TSB: OBSOLETE NOTICE April 07, 2020: This bulletin is now obsolete. Please see T-SB-0032-20. Replacement Certification Labels and VIN Plates
- 10174890TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, T-SB-0144-08, and T-SB-0304-17. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10152205TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0101-11. Applicability has been updated to include 2016 ? 2017 model year vehicles. Service Bulletin No. T-SB-0101-11 is Obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.
- 10145776Update on Technician Certification Requirements.
- 10145749Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.
- 10145748Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.
- 10143953TSB: REVISION NOTICE July 31, 2018 Rev2: ? The Supersession Notice has been updated. January 11, 2018 Rev1: ? The Supersession Notice has been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08 are obsolete and any printed versions should be discarded. Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin. Replacement Certification Label and VIN Plate Criteria A replacement certification label and/or VIN plate may be requested if: ? The vehicle was in an accident and the label and/or plate is damaged or attached to a part that will be replaced during the repair. ? The label and/or plate was stolen.
- 10143927TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0043-14. ? Applicability has been updated to include 2017 ? 2018 model year Toyota vehicles. Service Bulletin No. T-SB-0043-14 is obsolete and any printed versions should be discarded. The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system. NOTE New security provisions are required to obtain a reset passcode. It is critical to review the instructions for this new process BEFORE attempting to get a passcode in the new system.
- 10142568Provides instructions for returning Walker Exhaust Systems' BM Premium Pipe (P/N 55096). Because the part did not have the oxygen sensor fitting drilled out, it will not allow the sensor to be installed.
- 10133915Toyota vehicles are equipped with SRS, including various airbags and in some models, seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pretensioner devices did not perform as expected, please follow the steps in the recommendations section below.
- 10133649TSB: OBSOLETE NOTICE November 21, 2017: This bulletin is now obsolete. Please see T-SB-0304-17.
- 10132812Tech Tip: Low battery voltage can contribute to a MIL "ON" condition for P0335 (Crankshaft Position Sensor Circuit) and/or P0340 (Camshaft Position Sensor Circuit) due to inconsistent rotational speed of the engine's crankshaft.
- 10132715TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased.
- 10132708TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased.
- 10132410TSB: REVISION NOTICE July 20, 2017 Rev1: Applicability has been updated to exclude 2007 ? 2017 model year Avanza vehicles. Some hazardous material treatment and handling regulations at the state and local level define the pre-disposal deployment of airbag and pre-tensioner assemblies as hazardous material treatment. Hazardous material treatment may require special training, certification or licensing in certain areas. TMS recommends that dealership personnel carefully review and follow ALL local and state regulations, and where necessary, contract with Environmental Protection Agency (EPA) Licensed Hazardous Waste Transportation and Disposal facilities.
- 10132295This bulletin is now obsolete. Please see T-SB-0054-13.
- 10132287California (CA), Federal (FED), and 50 State Certified emission control underhood labels (emission labels) may be obtained through your dealership?s Parts Department utilizing standard replacement parts ordering procedures. Follow the guidelines outlined in this bulletin to ensure proper label application.
- 10132136The appearance of spots in tempered glass (when viewed at certain angles) is the result of the heat treating and quick quenching process during manufacturing.
- 10132084The purpose of this service bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL ?ON,? shifting issues, and/or transmission damage. Use the information in this bulletin when installing an automatic transmission/transaxle assembly
- 10132055Beginning in 1998, Toyota introduced side airbags as optional equipment. Toyota does NOT recommend replacement of original seat covers with non-Toyota leather or other seat cover materials on vehicles due to the following: Seat covers NOT recommended by Toyota may affect side airbag performance, in general or in part, during an accident. Modifications that negatively affect side airbag performance can result in severe occupant injuries. Seat covers are an integral part of this safety system. Replacing fabric seat covers with non-Toyota leather or other seat cover materials may compromise the effectiveness of this safety system. The design of the seat is complex, integrating safety and strength with comfort and luxury. Toyota strongly discourages modifying original equipment seats that have optional side airbags. Additionally, Toyota strongly advises against the installation or use of aftermarket seat covers, which could impair the performance of the side airbags in the event of an accident.
- 10131993This bulletin is now obsolete. Please see T-SB-0185-13.
- 10131988The following procedures are recommended during routine maintenance or in the event of a customer concern for wiper performance.
- 10131984A new Special Service Tool (SST 09709-00002) has been introduced to aid in the inspection procedure for certain vehicles equipped with a floor pedal-type parking brake system. This bulletin references the correct method for installing the Brake Pedal Force Gauge. Refer to the appropriate Repair Manual for parking brake pedal travel inspection and adjustment specification.
- 10131961Toyota vehicles are equipped with Supplemental Restraint Systems (SRS), including various airbags and in some models, seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pre-tensioner devices did not perform as expected (including an unintended deployment event), please follow the steps in the recommendations section below.
- 10131928A key part to maintain the proper function and safe operation of the vehicle's braking system is to perform a visual inspection when installing brake pads, calipers, and discs. The following recommendations are intended to provide general tips for the inspection and/or installation of Toyota Complete Maintenance Care (TCMC) front brake pads and discs. Always refer to the model specific Repair manual and TIS publications for specific repair instructions.
- 10131713TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, and T-SB-0144-08 are obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. REVISION NOTICE January 11, 2018 ? The Supersession Notice has been updated. Any previous printed versions of this bulletin should be discarded. Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin.
- 10123420TSB: Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin.
- 10111416TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system. NOTE: There are new security provisions required to obtain a Reset Pass-Code. It is critical that the instructions for this new process are reviewed BEFORE attempting to get a Pass-Code in the new system.
- 10111390TSB: When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.
Every Toyota Tacoma model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.