2006 Toyota Tacoma
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Tacoma › 2006
These records cover every 2006 Toyota Tacoma. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
11 recalls name the 2006 Toyota Tacoma. Newest first.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010…
Risk and remedy
Risk
If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
Remedy
SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion…
Risk and remedy
Risk
Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
Remedy
SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2005-2011 Toyota Tacoma Pre-Runner and 4x4 vehicles manufactured September 14, 2009, to October 11, 2010. In the affected vehicles, one of the leaf springs may fracture due to stress or corrosion. While being driven, the broken leaf could move out of position and contact…
Risk and remedy
Risk
If the fuel tank leaks fuel from being punctured, there is an increased risk of a fire.
Remedy
Toyota will notify owners and dealers will install new rear leaf spring assemblies. The recall began on January 29, 2016. Owners may contact Toyota customer service at 1-800-331-4331.
Toyota is recalling certain model year 2005-2010 Tacoma Access Cab vehicles manufactured September 14, 2004, through March 29, 2010; and model year 2011 Tacoma Access Cab vehicles manufactured July 1, 2010, through September 7, 2011. If the access doors are repeatedly and forcefully closed, the screws that attach the seat belt pre-tensioner to the seat belt…
Risk and remedy
Risk
If the seat belt pre-tensioner detaches from the seat belt assembly, the seat belt pre-tensioner will not perform as designed, increasing the risk of injury in a severe crash.
Remedy
Toyota will notify owners, and dealers will inspect the seat belt assemblies. Based on the inspection, the seat belt assembly will be replaced or new pre-tensioner screws will be installed with thread-locking sealant and a retractor spring cover with stopper ribs to prevent loosening of the screws. These services will be provided at no cost to the owner. The recall began during February 2014. Owners may contact Toyota at 1-800-331-4331.
Toyota IS recalling certain model year 2005-2009 tacoma vehicles, manufactured from september 14, 2004, through august 29, 2008. over time, steering wheel vibration may damage the spiral cable assembly (clockspring) that powers the drivers air bag module. if damage occurs, the air bag warning lamp will illuminate and the air bag may become deactivated.
Risk and remedy
Risk
In the event of a crash, the drivers side air bag may not deploy, increasing the risk of personal injury.
Remedy
Toyota will notify owners, and dealers will replace the spiral cable assembly, free of charge. an interim letter IS expected to be mailed to owners during april 2012. owners may contact toyota at 1-800-331-4331.
Gulf states toyota IS recalling certain model year 2005-2010 vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold between september 1, 2005 and june 2, 2008 without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
This does not meet the standard requirements.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. Dealers will also correct the owner's manual. the safety recall began on may 27, 2010. owners may contact gulf states toyota at 713-580-3300.
Southeast toyota IS recalling certain model year 2005-2011 passenger vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
A driver may overload a vehicle which may increase the risk of a crash.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. the safety recall began on may 27, 2010. owners may contact southeast toyota at 1-800-301-6859.
Toyota IS recalling certain model year 2004-2010 passenger vehicles. the accelerator pedal can get stuck in the wide open position due to its being trapped by an unsecured or incompatible driver's floor mat.
Risk and remedy
Risk
A stuck open accelerator pedal may result in very high vehicle speeds and make it difficult to stop the vehicle, which could cause a crash, serious injury or death.
Remedy
Toyota filed an amended defect report on november 25, 2009, stating that dealers will modify the accelerator pedal and, on certain vehicles, alter the shape of the floor surface under the pedal. these changes address the risk of pedal entrapment due to interference with the floor mat. redesigned accelerator pedals will become available beginning in april 2010 and dealers will replace any modified pedal with the new pedal if desired. also, dealers will replace any genuine toyota or lexus all-weather floor mats with redesigned all-weather mats, or repurchase the previous mats from owners who do not want the new ones. additionally, software modifications will be installed on camry, avalon and lexus ES 350, IS 350 and IS 250 models that will ensure that the brake overrides the accelerator in the event both brake and accelerator pedals are applied. toyota will begin mailing letters to owners on december 31, 2009. owners may contact toyota at 1-800-331-4331, lexus at 1-800-255-3987.
Toyota IS recalling 27,080 model year 2005 through 2010 passenger cars built from september 1, 2005 to may 4, 2009. these vehicles were not equipped with load carrying capacity modification labels which fails to conform with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims."
Risk and remedy
Risk
Incorrect load carrying capacity modification labels could result in the vehicle being overloaded, increasing the risk of a crash.
Remedy
Toyota will notify owners and provide them with a new, accurate label to be installed over the inaccurate label free of charge. the safety recall began on august 18, 2009. owners may contact toyota at 1-888-270-9371.
On certain vehicles, due to improper assembly of the air bag inflator, which IS used in the side air bag, the curtain shield air bag, and the knee air bag assembly, some inflators were produced with an insufficient amount of the heating agents necessary for proper air bag deployment. in this condition, the expansion force of the gas may be insufficient to…
Risk and remedy
Risk
This may increase the risk of injury to the occupant in the involved seating position in the event of a crash.
Remedy
Dealers will replace the specific srs air bag. the recall began on april 6, 2006. owners may contact toyota at 1-888-270-9371, scion at 1-866-548-1851, or lexus at 1-800-255-3987.
On certain pickup trucks, the bead of the tire may be damaged due to improper assembly of the tires onto the wheels.
Risk and remedy
Risk
If the vehicle IS operated in this condition, there IS a possibility that a bulge may be formed on the sidewall and air may leak from the area of the damaged bead and a crash could occur.
Remedy
Dealers will inspect the tires and replace if necessary free of charge. the recall began on march 27, 2006. owners may contact toyota at 1-800-331-4331.
Owner complaints
782 complaints66 involved a crash7 involved a fire31 injuries
What owners report most
Latest complaints
- Structure › Body
I received a Toyota recall notification in Dec 2015 for a frame rust inspection, RO Number 307016. I have since noticed fairly major frame rust, with a long 2-inch by 7-inch opening on the inside of the frame below the driver-side seat. I took the vehicle to Toyota on 20 APR 2026 for a leaf spring…
I received a Toyota recall notification in Dec 2015 for a frame rust inspection, RO Number 307016. I have since noticed fairly major frame rust, with a long 2-inch by 7-inch opening on the inside of the frame below the driver-side seat. I took the vehicle to Toyota on 20 APR 2026 for a leaf spring recall #302870. I asked them to take a look and was told the recall 307016 had expired. The original recall inspection for rust either failed to identify it or the inspector was inadequate at identifying it.
- Suspension
Voss Toyota would not perform the recall of new leaf springs that has not been completed on my truck. The frame is rusty and they will not touch my truck. There should be an existing recall or customer satisfaction program on the frame of this truck that needs done as well.
- Structure › Body · Suspension
I took my 2006 Toyota Tacoma ext cab 4x4 v6 to have diagnostic run on it . "EXACT PERFORMANCE " Johnson drive . KCK The differential was shot . However , that was not the final . They did not do full diagnostic . They informed me that my frame was rotted and rusted through and would not last till…
I took my 2006 Toyota Tacoma ext cab 4x4 v6 to have diagnostic run on it . "EXACT PERFORMANCE " Johnson drive . KCK The differential was shot . However , that was not the final . They did not do full diagnostic . They informed me that my frame was rotted and rusted through and would not last till spring and was a safety hazard. That was Dec. 2024 . The truck has been parked since . Ive had no transportation and can not run right out and buy another truck . I am also not willing to give up the truck either . I have put a lot of hard earned money into this truck believing it to last forever . The motor and train are sound . I do not want to junk the truck . Please , tell me what I can do . Yes . My vehicle is available for inspection upon request.
- Steering · Structure › Body · Suspension
The frame of my 2006 Toyota Tacoma (VIN: [XXX] ) is severely corroded and compromised. I recently acquired the vehicle and discovered that it was part of a past Toyota recall/program for frame corrosion inspection and replacement. However, it appears the previous owner did not take the vehicle in…
The frame of my 2006 Toyota Tacoma (VIN: [XXX] ) is severely corroded and compromised. I recently acquired the vehicle and discovered that it was part of a past Toyota recall/program for frame corrosion inspection and replacement. However, it appears the previous owner did not take the vehicle in for the service. The frame now shows advanced rust and structural weakness, which puts my safety and the safety of others at risk. I am concerned that the recall program was not adequately communicated or tracked, and I am requesting that the NHTSA review this issue for potential reopening or expansion of coverage for affected vehicles like mine. The vehicle is available for inspection if needed. Thanks. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Structure
The contact owns a 2006 Toyota Tacoma. The contact stated while driving at an undisclosed speed, the contact heard a loud noise coming from the rear of the vehicle with no warning light illuminated. The contact stated that while the vehicle was parked, the contact noticed that the rear subframe of…
The contact owns a 2006 Toyota Tacoma. The contact stated while driving at an undisclosed speed, the contact heard a loud noise coming from the rear of the vehicle with no warning light illuminated. The contact stated that while the vehicle was parked, the contact noticed that the rear subframe of the vehicle was fractured. The vehicle was towed to an independent mechanic, where it was diagnosed that the rear subframe of the vehicle failed and needed to be replaced. The vehicle was not repaired. The dealer was contacted. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 230,000.
- Air bags
The contact owns a 2006 Toyota Tacoma. The contact stated that while driving at an undisclosed speed, the air bag warning light illuminated. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. After investigating the failure, the contact related the…
The contact owns a 2006 Toyota Tacoma. The contact stated that while driving at an undisclosed speed, the air bag warning light illuminated. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 12V092000 (Air Bags), but the VIN was not included. The manufacturer was notified of the failure but provided no assistance. The failure mileage was 220,000.
- Structure › Body
The contact owns a 2006 Toyota Tacoma. The contact stated that the vehicle failed the State Inspection because there was a hole approximately 3 inches wide on the driver's side of the vehicle near the catalytic converter. The vehicle was taken to the dealer, who confirmed that the hole was caused…
The contact owns a 2006 Toyota Tacoma. The contact stated that the vehicle failed the State Inspection because there was a hole approximately 3 inches wide on the driver's side of the vehicle near the catalytic converter. The vehicle was taken to the dealer, who confirmed that the hole was caused by extensive rust and needed to be repaired. The vehicle was not repaired. The manufacturer was made aware of the failure and informed the contact that there was a recall issued twice; however, the recall had expired. The manufacturer referred the contact to the NHTSA Hotline to report the failure. The failure mileage was approximately 130,000.
- Suspension · Unknown or other
The truck's frame has severely rusted. The frame has deteriorated. It is unsafe to drive as the frame is breaking in half. According to Toyota, this was a huge problem with the 2006 Tacoma. They will not fix the frame or offer any solution. My son can not safely drive this vehicle.
- Structure › Body
I went in to get my truck worked on & was told it was not safe. The frame is rusted and cracked. I did not receive a recall notification. Now, I have a broken truck and cannot afford to buy another vehicle or pay to repair this one. This is a safety hazard for the other people on the road and a death trap for the owners with vehicles that Toyota will not stand behind.
- Structure › Body
Toyota Tacoma 2006 TRD, This vehicle was recalled for rust to the frame on 10/03/2018. The frame was replaced by Sheehy Toyota of Fredericksburg, Virginia. The work was done and completed con 02/07/2019. The vehicle supposedly was thoroughly inspected for any problems by the dealership. Then…
Toyota Tacoma 2006 TRD, This vehicle was recalled for rust to the frame on 10/03/2018. The frame was replaced by Sheehy Toyota of Fredericksburg, Virginia. The work was done and completed con 02/07/2019. The vehicle supposedly was thoroughly inspected for any problems by the dealership. Then released to me after the work was done. Then in November of 2019 I moved from Virginia to Nebraska. Used this truck to move with and pulled a trailer over 2,000 miles with it. Little did I know my life was in danger due to negligence by the dealers service department. Recently I replaced the rear bumper on this truck. By doing this it fully exposed the trailer hitch system on the truck. This is when I clearly seen that a part of the trailer hitch was completely rusted through. When replacing the frame on this truck the dealership had to notice this severely damaged part. Yet they did not inform me of this situation. If they had, I would have had the part replaced, due to the chance of it breaking which could have caused an accident. This is nothing short of pure negligence on the part of this dealership. People could have been severely injured or killed due to this negligence. I have pictures of this part just the way they left it.
- Structure › Body
Frame and others components are very rusted
- Structure › Body
Hi My name is [XXX] I currently own a toyota 2006 tacoma for which the frame broke this week and now not drivable. I learned when I took my car to a local dealer for a recall seat belts and other issues in 2021, the Dealer told me that the frame was very rust and that I needed to contact Toyota…
Hi My name is [XXX] I currently own a toyota 2006 tacoma for which the frame broke this week and now not drivable. I learned when I took my car to a local dealer for a recall seat belts and other issues in 2021, the Dealer told me that the frame was very rust and that I needed to contact Toyota USA as there was a recall to rusted frames that involved my vehicle year make. I called Toyota back then and they told me there was nothing they can do as that safety recall was expired. We cannot afford to pay oop for the fix of the frame and plus I emphasized to Toyota that I had never been notified at least I never got a notice. At this point I'm very concerned for my husband safeness that is the car he uses for work, we have been a very loyal customer to Toyota and now I'm very disappointed and more so concerned about my husband safety as Toyota seems not able to fix it I had filed a claim and they did not resolve in our favor. This is a formal complaint in regards to safety. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
- Structure › Body · Suspension · Unknown or other
There are holes in the frame and the frame mounts. Sold with a clean title
- Structure › Body · Suspension
This truck is for sale in Oregon with HOLES/RUST on the frame and the frame mount. It is being sold with a clean title which clearly with the frame damage it is considered a branded title. The car lot that is selling the truck will no disclose the frame issue when asked about the structure damage on the truck. BUYERS BEWARE!!!
- Unknown or other
Im writing on a recall inspection on my 2006 Toyota Tacoma did it at a dealer They told me there was some rust and they would do a underlinement but never contacted me back to have it done .now i have a crack in my frame which im worried ! So im hoping there is or you would issue a recall to have…
Im writing on a recall inspection on my 2006 Toyota Tacoma did it at a dealer They told me there was some rust and they would do a underlinement but never contacted me back to have it done .now i have a crack in my frame which im worried ! So im hoping there is or you would issue a recall to have this done since i think the dealer should have replaced it in the first place please help me and respond [XXX] my email is [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Unknown or other
Brought vehicle to garage for maintenance and mechanic told me the vehicle is unsafe to drive due to rotted frame should have been recalled but I never received a recall notice
- Structure › Frame and members · Suspension
The contact owns a 2006 Toyota Tacoma. The contact stated that after the vehicle was taken to a local dealer for unrelated repairs, the mechanic determined that the rear subframe needed to be replaced. The contact was made aware of NHTSA Campaign Number: 14V604000 (Suspension); however, the VIN was…
The contact owns a 2006 Toyota Tacoma. The contact stated that after the vehicle was taken to a local dealer for unrelated repairs, the mechanic determined that the rear subframe needed to be replaced. The contact was made aware of NHTSA Campaign Number: 14V604000 (Suspension); however, the VIN was not included in the recall. The manufacturer was not made aware of the failure. The approximate failure mileage was 178,000. The VIN was not available.
- Power train
I was driving and all of the sudden I felt a vibration when I let off the gas...I checked under and saw that the drive shaft/yoke was separated a little, so I decided not to drive it anymore and to disassemble it and found out that the lock nut is missing and more likely it came off. I've noticed…
I was driving and all of the sudden I felt a vibration when I let off the gas...I checked under and saw that the drive shaft/yoke was separated a little, so I decided not to drive it anymore and to disassemble it and found out that the lock nut is missing and more likely it came off. I've noticed that no sign that the lock been staked to lock in position (picture attached)...this is a near miss and could possibly there are more like this on the road that could lead to a very serious accident if this comes off while running in high speed. I bought this car in 2005 brand new, and I know for sure that this never been work on...I am a mechanic myself so I does the Maintenace to all my cars...I just want to make the company aware to prevent any possible serious accident...I owe 5 Toyota cars and I know one of the best and safest vehicle.
- Structure › Body · Suspension · Unknown or other
I will try to give you as concise statement of my complaint as possible, however, I have copies I sent to the manufacturer and others that I'm willing to furnish you if requested. On 3/18/21, I wrote to Toyota's Executive VP , Chief Quality Officer, [XXX], stating my compliance with their notice…
I will try to give you as concise statement of my complaint as possible, however, I have copies I sent to the manufacturer and others that I'm willing to furnish you if requested. On 3/18/21, I wrote to Toyota's Executive VP , Chief Quality Officer, [XXX], stating my compliance with their notice of 7/9/15, requiring frame inspection, significant perforation not found, therefore they applied CRC corrosion resistant compound to my frame. As NO critical problem was noted, I felt I was good until during a later inspection was performed and rated more attention. On 3/29/21 during my next oil change I noted on a notation on an unusual service bill, typewritten not the usual custom printed type, a notation that I have 2 holes, approx. 3.5" on my frame, use caution if driving". At this time I found there was an open class action suit against Toyota. Toyota advised me that since I had not responded to more than one notification I was not included in the suit. I replied that "I DID NOT RECEIVE ANY SUCH NOTATION". As they did not send receipt requested or certified, I neither could prove sent or not received. I asked for consideration based on that to which, was denied. I have written also to CT Attorney General, CT US Senator, [XXX], with only the Attorney General's office stating Toyota's response was negative. I realize this is a late request, I was not aware of his avenue. I have Certified copies of each request for help, which I am more than happy to copy and send to you if you will try to help me right Toyota's wrong. I'm an 89 year old male just trying to right a wrong I believe done to me. I DID NOT RECEIVE NOTIFICATION FROM TOYOTA! , If I had, I would not be so persistent. I send my letters CERTIFIED, they should have had to also, could have solved this problem earlier. Please help me, thank you. INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6). The contact has noted that they still have yet to receive any compensation or resolution to this issue.
- Structure › Body
My frame is rusting with parts falling off in my drive. Toyota told me in 2017 the frame did not warrant repair.
- Structure › Body · Unknown or other
the frame is rusting out over the right rear wheel. it had the frame spary ,but iti is still rusting out
- Steering · Suspension · Unknown or other
The frame is rusted so bad. The dealer wouldn’t replace due to the vehicle being registered in Florida as it’s not one of the states affected. But my Toyota came from a Pennsylvania dealer first then shipped to Florida after years of being in Pennsylvania and not having an issue up there. Now I’m stuck with a truck I can’t sell or fix. It’s not right. Where is the quality control on this.
- Structure › Body
The contact owns a 2006 Toyota Tacoma. The contact stated while having the vehicle repaired under recall, the mechanic stated that the subframe was rusted. The vehicle was not repaired. The manufacturer was contacted, and a case was filed. The failure mileage was 50,000.
- Suspension
The contact owns a 2006 Toyota Tacoma. The contact stated upon taking the vehicle to an independent mechanic for front brake repair, she was informed that the front side of the subframe and the passenger's side and the driver's side subframe were severely corroded. The dealer was notified of the…
The contact owns a 2006 Toyota Tacoma. The contact stated upon taking the vehicle to an independent mechanic for front brake repair, she was informed that the front side of the subframe and the passenger's side and the driver's side subframe were severely corroded. The dealer was notified of the failure and informed the contact that she would need to pay for the repair because an unknown Extended Warranty related to the failure had expired. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure but did not provide any assistance. The failure mileage was approximately 70,000.
- Suspension
The frame of the vechile completely rusted, not normally rusted, its obvious that cheap or bad quality material. If it goes like this will break soon.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Sudden and uncontrolled acceleration
The petitioner owns a model year (my) 2006 toyota tacoma equipped with a V6 engine and automatic transmission.in a petition sent to nhtsa's office of defects investigation (odi) dated january 10, 2008, he alleges he experienced two incidents of unwanted acceleration while driving his tacoma.the petitioner reported…
The petitioner owns a model year (my) 2006 toyota tacoma equipped with a V6 engine and automatic transmission.in a petition sent to nhtsa's office of defects investigation (odi) dated january 10, 2008, he alleges he experienced two incidents of unwanted acceleration while driving his tacoma.the petitioner reported that during both incidents, while applying the brake, the engine speed increased of its own accord (without accelerator application), causing sudden and uncontrolled acceleration.the petitioner requested that the agency commence a proceeding to determine the existence of a defect related to motor vehicle safety involving the electronically actuated throttle control system.odi reviewed the petition, assessed voqs, interviewed persons who filed voqs, tested the vehicle, and reviewed toyota's response to an agency information request.the complaints fell into three groups.a majority of the complaints may have involved the tacoma's throttle control system.some complaints did not involve a failure of the throttle control system.for the remaining reports, although there may have been an issue with the throttle control system as one possible explanation, we have been unable to determine a cause related to throttle control or any underlying cause that gave rise to the complaint.for those vehicles where the throttle control system did not perform as the owner believes it should have, the information suggesting a possible defect related to motor vehicle safety IS quite limited.additional investigation IS unlikely to result in a finding that a defect related to motor vehicle safety exists or a nhtsa order for the notification and remedy of a safety-related defect as requested by the petitioner.therefore, in view of the need to allocate and prioritize nhtsa's limited resources to best accomplish the agency's safety mission, the petition IS denied.please see thefederal register notice for further details.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10244108TSB: Some 2005 ? 2023 model year Tacoma vehicles equipped with a manual transmission may exhibit a squeak or creak noise from the clutch pedal when it is depressed or released.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10210376OBSOLETE NOTICE Month 09, 2022: This bulletin is now obsolete. Please see T-SB-0014-22.
- 10210375TSB: This Service Bulletin includes procedures to replace damaged or loose front carpet floor retainer(s) without replacing the carpet assembly. Follow the Repair Procedure in this bulletin to replace the loose or damaged carpet floor retainer(s).
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10204571TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10197494Technician Certification Requirements.
- 10197493Updated dealer letter
- 10197490Warranty enhancement program (ZH6): warranty extension for frame corrosion on certain 2005-2010 my tacoma vehicles
- 10197489Brake line color codes.
- 10197488There is a drivetrain vibration and/or noise.
- 10197476Replacement vin plates.
- 10197473Product general information.
- 10197434Technical Instructions for Limited Service Campaign
- 10190460Toyota Safety Recall and Service Campaign - Technician Certification Requirements
- 10190453TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
Every Toyota Tacoma model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.