2020 Toyota Tacoma

Recalls

1 recall names the 2020 Toyota Tacoma. Newest first.

• Fuel system, gasoline › Delivery › Fuel pump

  Nov 4, 2020NHTSA 20V6820001,525,742 vehicles

  Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2018-2019 4Runner, 2019-2020 Avalon, 2019 Corolla Hatchback, 2017-2019 Highlander, 2018-2020 Camry, 2020 Corolla, 2018-2019 Land Cruiser, 2017-2020 Tacoma, 2019-2020 RAV4, 2019-2020 Sequoia, 2017-2020 Sienna, 2019-2020 Tundra, 2018-2020 Lexus ES350, 2017 Lexus GS200t, 2017-2019 Lexus…

  Risk and remedy

  Risk

  If the fuel pump fails, the engine can stall while driving, increasing the risk of a crash.

  Remedy

  Toyota will notify owners, and dealers will replace the fuel pump assembly with an improved one, free of charge. Owners of specific models were notified that remedy parts were available starting January 21, 2021. Owners of other models will be notified as remedy parts become available. Remedy parts should be available for all affected vehicles by late March 2021. Owners may contact Toyota customer service at 1-888-270-9371 or Lexus customer service at 1-800-255-3987. Note: This recall is an expansion of recall 20V-012. Toyota's number for this recall is 20TA02. Lexus' number for this recall is 20LA01.

  Full recall details →

Owner complaints

What owners report most

1. Fuel/propulsion system21
2. Power train15
3. Engine14
4. Service brakes12
5. Forward collision avoidance11
6. Electrical system9
7. Vehicle speed control9
8. Unknown or other9
9. Air bags4
10. Steering4

Latest complaints

• Oct 14, 2026CA
  Steering
  The steering rack has failed multiple times. The rack that was installed in the vehicle when I bought it new had cracked by 53,000 miles - not ideal, but these things happen. (This was discovered by my local Toyota dealership when I brought it in for service.) I returned for a six-month service…

  The steering rack has failed multiple times. The rack that was installed in the vehicle when I bought it new had cracked by 53,000 miles - not ideal, but these things happen. (This was discovered by my local Toyota dealership when I brought it in for service.) I returned for a six-month service with no problems. When I returned for my 60,000-mile service, thirteen months after the rack was replaced, the new steering rack had also cracked. This was after less than 7,000 miles driven on the new rack, almost entirely on paved roads in a temperate part of the country. At about twelve months, the rack began to make significant groaning sounds when making turns at low speeds. No warning lights have come on to indicate a problem with either rack's failure. The rack is currently being replaced by the dealership. However, I received a call today that the new rack they had installed has also been shown to be deficient, so they are removing it and replacing it with another part they had in stock. At this point, that's 3 problematic steering racks by 60,000 miles. From what I've read online, this is a relatively common problem for third-generation Tacomas. I'm concerned that the parts Toyota is producing are deficient and need to be re-evaluated. I'm worried that if I were not monitoring this problem so closely, I might be in danger of a crash if the rack were to have worsening issues at high speeds.

• Oct 13, 2026KS
  Electrical system · Forward collision avoidance › Adaptive cruise control · Vehicle speed control
  Occasionally Center cluster on start up is black it has gotten more frequent. No odometer, No cruise control, no digital speedometer. The truck has 12,000 miles on it now today October 13,2026. Selling dealer out of town has no knowledge of issue. Local dealer at time it exhibited issue said never…

  Occasionally Center cluster on start up is black it has gotten more frequent. No odometer, No cruise control, no digital speedometer. The truck has 12,000 miles on it now today October 13,2026. Selling dealer out of town has no knowledge of issue. Local dealer at time it exhibited issue said never seen that before just disconnect battery for 30mins that will fix it that’s what we do. Was waiting for recall or TSB but am tired of waiting.

• Oct 6, 2026TX
  Unknown or other

  The rear quarter panel pressure vents failed which allowed water intrusion into the cabin of the truck. Severe mold and smell has occurred due to water damage. There were no warnings from toyota or dealership about these pieces failing and causing damage. To have a dealership replace just the parts, NOT including ruined carpet and pads due to mold, I was quoted $800- $5000 to replace a $60 piece of plastic

• Aug 18, 2026MS
  Visibility/wiper

  The wiper motor does not move fast enough to keep the windshield clear in heavy rain. Yes it is available to be inspected. Unable to see while driving even after slowing down. Only when encountering heavy rain. No No

• Aug 4, 2026VA
  Power train
  The Clutch in the Manual Transmission makes a "creaking" noise, and you can feel it when driving too, when depressing the clutch pedal... The creaking noise is annoying, but the feel of the creaking is very distracting when driving the manual transmission, depressing the creaky clutch can distract…

  The Clutch in the Manual Transmission makes a "creaking" noise, and you can feel it when driving too, when depressing the clutch pedal... The creaking noise is annoying, but the feel of the creaking is very distracting when driving the manual transmission, depressing the creaky clutch can distract you from the road because you can feel it; and it only get's worse when left alone. This is a recurring issue on my 2020 Tacoma. It was "fixed" by the dealer in 2022, I think, and now it's happening again... same "creaking" issue that starts out small and gets louder and more violent (you can feel the "creaking" in the pedal more) with time. This really seems like a parts failure and not a lube job. There is a TSB out for this issue (T-SB-0112-19), but this really should be upgraded to a recall.

• Jun 9, 2026GA
  Unknown or other
  I am reporting a safety-related failure of an aftermarket bull bar / grille guard purchased through Amazon. The bull bar detached from the vehicle while the vehicle was in motion on a public road. After detaching, the bar was dragged on the road and was only partially held by the fog light wiring.…

  I am reporting a safety-related failure of an aftermarket bull bar / grille guard purchased through Amazon. The bull bar detached from the vehicle while the vehicle was in motion on a public road. After detaching, the bar was dragged on the road and was only partially held by the fog light wiring. This created a road hazard and could have caused loss of control, damage to other vehicles, or injury to pedestrians or other drivers. The failure appears to be at or near the welded joint / mounting area, suggesting a possible manufacturing or weld defect rather than normal wear. The product was installed on the vehicle before the incident and failed during normal driving. Product: - Product type: Aftermarket bull bar / grille guard - Brand / seller: Topline_autopart / Amazon - Purchased from: Amazon - Order number: 114-8975268-2481806 - Purchase date: November 21, 2025 Vehicle: - Year / Make / Model: 2020 Toyota Tacoma - Incident date: Mar. 7th 2026 - Approximate speed: 45mph - Location: Exit 111 at I-16 EB I have photos of the failed weld / mounting area, the damaged bull bar, and Amazon order information. I am concerned that other units of this product may have the same defect and could detach while driving.

• Apr 10, 2026PA
  Power train

  Fluid weeping/leaking/staining on differential housing

• Mar 17, 2026TX
  Fuel/propulsion system · Unknown or other · Vehicle speed control
  On Sunday, March 15,2026, I was driving from Houston, TX to Pharr, TX at the speed of 75mph on the left lane to pass an 18 wheeler, with another 18 wheeler behind me, and my truck started idling erratically. I lost speed and my service engine light came on. My truck slowed down and I almost got in…

  On Sunday, March 15,2026, I was driving from Houston, TX to Pharr, TX at the speed of 75mph on the left lane to pass an 18 wheeler, with another 18 wheeler behind me, and my truck started idling erratically. I lost speed and my service engine light came on. My truck slowed down and I almost got in a car accident with the 18 wheelers because the truck did this. The truck behind me slowed down on time and it went immediately to the right lane to avoid hitting my truck. I feared for my life. All the vehicles behind me and the 18 wheelers also went to the right lane to avoid me. By this time, the TRAC light had already come on also. I managed a space of no vehicles and steered towards the right safety lane. I pulled over at the local truck stop and stoped my truck to rest. After about 5 minutes I tried starting my truck and it wasn’t starting. I am a little mechanically inclined, so I started troubleshooting the truck. My code reader gave these codes: P1605-00, P0300-27, P0300-85, and P0302-00. Unscathed to start the truck after a while and got back on the road. The drive was brutal, as the truck kept burping erratically, but I made it home safely. I took my truck to the mechanic and he did some repairs and told me the issue is the fuel pump. I have checked the recalls for my truck but it shows zero recalls for my truck. Luckily I am alive to report this life threatening safety issue that Toyota has on this model. How do I get Toyota responsible to make the repairs on my truck? The part alone is over $1200 at O’Reily auto parts.

• Mar 10, 2026TX
  Steering

  This is a safety issue and a known issue. Toyota is reporting that it is wear and tear and denying my goodwill repair but it is a technical service bulletin TSB #0082-21 - so it is a safety issue. I emailed and called and have case number with Toyota - 260225002292

• Feb 6, 2026NM
  Engine · Power train
  I am having same issue as the incident i found here 12/06/2025, LISTED UNDER COMPLAINTS-I live in Rio Rancho NM- Concern it involves the automatic transmission torque converter specifically torque-converter lock-up behavior, The issue presents as a vibration/shudder during steady -speed driving…

  I am having same issue as the incident i found here 12/06/2025, LISTED UNDER COMPLAINTS-I live in Rio Rancho NM- Concern it involves the automatic transmission torque converter specifically torque-converter lock-up behavior, The issue presents as a vibration/shudder during steady -speed driving , we are driving around 30-40 miles per hour when it happens, The vehicle remains in my possession and is available for inspection upon request. The vibration/shudder occurs during steady cruising at moderate speeds which affects vehicle smoothness and driver confidence, while no accident has occurred yet, the behavior is unexpected and distracting and could impact safe vehicle operation, particularly during highway driving or when maintaining steady speed in traffic, I Took it to my Toyota dealer a few months ago they said they could not find any issues, I am taking it again tomorrow and now I CAN SHOW THEM THAT I FOUND THE SAME ISSUE UNDER COMPLAINTS, I NEED TO TOYOTA TO FIX MY ISSUE ASAP,

• Jan 22, 2026NY
  Engine · Forward collision avoidance › Adaptive cruise control · Power train
  Toyota has a manufacturing defect going on with their v6 in Gen 3Tacoma's. I have a 2020 Limited with 48,200 miles that needs a new cylinder head. It threw a check engine light on me, and luckily enough I took it to the dealership within about 30 miles, otherwise my engine could have exploded. I…

  Toyota has a manufacturing defect going on with their v6 in Gen 3Tacoma's. I have a 2020 Limited with 48,200 miles that needs a new cylinder head. It threw a check engine light on me, and luckily enough I took it to the dealership within about 30 miles, otherwise my engine could have exploded. I have videos from the dealership inspection that I cannot attach here. I have since found via the error code a history of these issues on newer trucks. [XXX] [XXX] [XXX] [XXX] [XXX] [XXX] I believe that this issue could pose serious safety issues for someone who is not as immediate on stopping driving, as it was just a check engine light. If you were to drive on this light down the highway, and have catastrophic failure, the Tacoma becomes a completely unpowered hazard. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

• Jan 15, 2026NC
  Power train
  The concern involves the automatic transmission torque converter, specifically torque-converter lock-up behavior. The issue presents as a vibration/shudder during steady-speed driving. The vehicle remains in my possession and is available for inspection upon request. The vibration/shudder occurs…

  The concern involves the automatic transmission torque converter, specifically torque-converter lock-up behavior. The issue presents as a vibration/shudder during steady-speed driving. The vehicle remains in my possession and is available for inspection upon request. The vibration/shudder occurs during steady cruising at moderate speeds, which affects vehicle smoothness and driver confidence. While no accident occurred, the behavior is unexpected and distracting and could impact safe vehicle operation, particularly during highway driving or when maintaining steady speed in traffic. Has the problem been reproduced or confirmed by a dealer or independent service center? Yes. The concern has been reported to and evaluated by a Toyota dealership. Diagnostic checks did not produce fault codes, but the symptoms are consistent with torque-converter lock-up issues that occur without triggering warning lights or diagnostic trouble codes. Has the vehicle or component been inspected by the manufacturer, police, insurance representatives, or others? The vehicle has been inspected by a Toyota dealership service department. It has not been inspected by police or insurance representatives, as no accident or collision occurred. Were there any warning lamps, messages, or other symptoms prior to the failure, and when did they first appear? No warning lights or messages were displayed. The primary symptom was a noticeable vibration/shudder during steady-speed driving, which began after the vehicle was purchased in July and after routine dealer-performed maintenance. The condition developed without advance warning indicators.

• Jan 12, 2026CA120,000 mi
  Fuel system, gasoline
  The contact owns a 2020 Toyota Tacoma. The contact stated that while driving approximately 35 MPH, the vehicle stalled. The vehicle lost power steering assist and brakes, but was able to coast to the side of the road. The contact stated that the low oil and brake warning lights were illuminated…

  The contact owns a 2020 Toyota Tacoma. The contact stated that while driving approximately 35 MPH, the vehicle stalled. The vehicle lost power steering assist and brakes, but was able to coast to the side of the road. The contact stated that the low oil and brake warning lights were illuminated, and a message to “Contact Dealer” was displayed. The vehicle was hauled by a friend's truck to a parking lot. The contact used a hand scanner and retrieved fault codes for the fuel pump, brake override, drive start control malfunction, and low oil pressure. The vehicle was towed back to the residence. The contact had not taken the vehicle to a local dealer or independent mechanic to be diagnosed or repaired. The contact researched online and related the failure to NHTSA Campaign Number: 20V682000 (Fuel System, Gasoline). The manufacturer was informed of the failure, and the contact was informed that the VIN was not included in the recall. The failure mileage was approximately 120,000.

• Jan 5, 2026NY
  Engine · Power train
  Vehicle accelerated on its own at highway speed, had to hit the brake in order for it to stop accelerating. Other more common issue is that vehicle RPMs go up when trying to accelerate but vehicle does not accelerate, just RPMs go up. This happened about 5 times over the past year and a half.…

  Vehicle accelerated on its own at highway speed, had to hit the brake in order for it to stop accelerating. Other more common issue is that vehicle RPMs go up when trying to accelerate but vehicle does not accelerate, just RPMs go up. This happened about 5 times over the past year and a half. Most noticeable time was where I couldn’t accelerate after at all until I pulled over and put it in park. Then back to drive again and worked fine. This car has been brought over to Lia Toyota of rockland numerous times with this second issue and they can never duplicate nor fix the problem

• Nov 5, 2025TN
  Service brakes

  Brake fluid leaking into cab from master cylinder

• Nov 2, 2025HI
  Fuel/propulsion system

  Unknown

• Sep 13, 2025CA
  Fuel/propulsion system
  Driving the car on the freeway and upon exiting it stalled going up an incline without any warning. Could have caused a major accident and I am lucky that it did not happen on the freeway. I researched and found out that 2019-2020 Toyota pickups had this known issue in which the fuel pump fails…

  Driving the car on the freeway and upon exiting it stalled going up an incline without any warning. Could have caused a major accident and I am lucky that it did not happen on the freeway. I researched and found out that 2019-2020 Toyota pickups had this known issue in which the fuel pump fails without any warning. As a result, Toyota did issue a recall, however when I contacted them and provided the Vin number, they indicated my truck was not covered under the recall. I am very upset that a 5 year old truck failed on the fuel pump and Toyota is not covering it under the recall since this is a known issue that could have resulted in a serious accident.

• Sep 10, 2025NM12,000 mi
  Back over prevention
  The contact owns a 2020 Toyota Tacoma. The contact stated that while reversing, the rear-view camera failed to display a centered rear-view image. The contact observed that the rearview image was misaligned, potentially compromising the back over prevention system. No warning lights were…

  The contact owns a 2020 Toyota Tacoma. The contact stated that while reversing, the rear-view camera failed to display a centered rear-view image. The contact observed that the rearview image was misaligned, potentially compromising the back over prevention system. No warning lights were illuminated. No warning lights were illuminated. The vehicle was taken to the local dealer; however, the vehicle was not diagnosed or repaired due to the cost. The manufacturer was made aware of the failure. The failure mileage was approximately 12,000.

• Sep 10, 2025NM
  Back over prevention

  The contact owns a 2020 Toyota Tacoma. The contact stated that while in reverse, the rearview camera failed to display a centered rearview image. The contact observed that the rearview image was misaligned, potentially compromising the back over prevention system. No warning lights were illuminated. The vehicle was not repaired. The failure mileage was unknown. The VIN was unavailable.

• Aug 11, 2025FL
  Structure › Body

  Pressure release vents mounted on rear of the cab are leaking water during rain storms causing mold build up in carpet.

• May 11, 2025FL
  Service brakes

  My brake master cylinder is leaking brake fluid under the steering column and dripping inside. This seems to have a recall but they only did it for trucks up to 2019 and my 2020 has the same exact issue.

• May 9, 2025CA
  Engine
  The timing chain cover is leaking oil which will render the vehicle inoperable which is a safety concern. The diagnosis was done at Toyota and I am being told to repair the truck already at 84,000 miles. The cost of the repair is astronomical ($6,666). The problem appears to be a gasket which to…

  The timing chain cover is leaking oil which will render the vehicle inoperable which is a safety concern. The diagnosis was done at Toyota and I am being told to repair the truck already at 84,000 miles. The cost of the repair is astronomical ($6,666). The problem appears to be a gasket which to reach for repair requires dropping the engine. It is not fair that consumers bear this burden for faulty design linked directly to a safety concern (engine will stop working because of oil leak).

• Apr 11, 2025CA
  Fuel/propulsion system

  The truck suddenly stopped Took it to a mechanic and had to replace the fuel pump. AAA tow company along with the mechanic that fixed the issue said that it is odd a truck so new with fuel pump issues I have the bad fuel pump and invoices. The truck stopped working at 55,247mi on the odometer

• Apr 2, 2025ME
  Power train
  Throwout bearing premature failure. Saftey was put at risk with harsh shifting and potential transmission failure while merging into traffic due to not going into gear. Was brought to a shop to install a new TOB and had to replace my pressure plate as well due to wear. TOB is now doing something…

  Throwout bearing premature failure. Saftey was put at risk with harsh shifting and potential transmission failure while merging into traffic due to not going into gear. Was brought to a shop to install a new TOB and had to replace my pressure plate as well due to wear. TOB is now doing something similar causing noises due to wear on the shaft it rides on. This is a very very common problem and should be addressed as a failure point especially for what little milage is on the truck.

• Mar 18, 2025LA
  Air bags · Seat belts

  Front passenger seat belt/SRS lights flashing and staying on. I recently gave someone a ride and when they adjusted the seat/seat belt these lights on the dash came on and will not go off. My guess it is the SRS/seatbelt/seat pretensioner.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11010353Some 2016 2022 model year Tacoma vehicles with Super White (040) paint may exhibit paint peeling along the exterior window door frames and/or inner fender edges under the hood. The affected panel(s) require repainting to address this condition. The paint repair may need to be sublet to a body shop.
• 11010328Technical instructions for customer support program 23te08 coverage for paint peeling on door frames + front inner fenders certain 2016-2022 model year tacoma
• 11010327Customer Support Program 23TE08 Paint Repair Process Updated 10.02.2024 Updated Parts quantity on two parts.
• 11010083Technical instructions for customer support program 23te08 coverage for paint peeling on door frames + front inner fenders certain 2016-2022 model year tacoma
• 11010082In our continuing efforts to ensure the best in customer satisfaction, Toyota is announcing a Customer Support Program to provide coverage for paint peeling on door frames and front inner fenders on certain 2016-2022 model year Tacoma vehicles. Toyota has received some reports of paint peeling along the exterior door window frames and front inner fenders under the hood on certain Tacoma vehicles with 040 Super White paint color. Although the vehicle paint is covered by Toyotas New Vehicle Limited Warranty for three years, or 36,000 miles (whichever comes first), we at Toyota care about the customers ownership experience. Toyota is providing coverage for repairs related to the condition described above.
• 11010081Customer Support Program 23TE08 Paint Repair Process
• 11010080Toyota has received some reports of paint peeling along the exterior door window frames and front inner fenders under the hood on certain Tacoma vehicles with 040 Super White paint color. Although the vehicle paint is covered by Toyotas New Vehicle Limited Warranty for three years, or 36,000 miles (whichever comes first), we at Toyota care about the customers ownership experience. Toyota is providing coverage for repairs related to the condition described above.
• 11010066Customer support program frequently asked questions
• 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
• 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
• 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
• 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
• 11003654Phone call sound quality may be adjusted to fit the Tacoma owners preferences.
• 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11003619Customers have expressed concerns about the performance of Qi Wireless Chargers. Wireless chargers on applicable vehicles are designed to work with Qi Certified devices only. MagSafe devices, that are not Qi Certified, may not charge as expected with Qi Wireless Chargers.
• 11003599Phone call sound quality may be adjusted to fit the Tacoma owners preferences.
• 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11003564Customers have expressed concerns about the performance of Qi Wireless Chargers. Wireless chargers on applicable vehicles are designed to work with Qi Certified devices only. MagSafe devices, that are not Qi Certified, may not charge as expected with Qi Wireless Chargers.
• 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
• 10252259TSB: Some 2018 ? 2022 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update, however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the expiration date of the dynamic subscription (stored in the head unit), must be checked. If the expiration date has not passed, a license key may be generated without the purchase of an Activation Card Number (ACN). Updating the map without the use of an ACN is considered an Embedded Navigation Update (refer to pg. 10) and performing this update does not extend the subscription to dynamic map services. If the subscription period has expired, or is expiring within the next 90 days, it should be recommended to the customer to purchase an ACN. Utilizing an ACN, will initiate the Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the embedded navigation update and provide dynamic map services for a period of two years from the date that the Dynamic Navigation Update is performed. ACNs are provided in a pamphlet available through the normal parts ordering system. Follow the process in this bulletin to perform the update.
• 10247828TSB: All 2020 ? 2023 model year 4Runner, 2018 ? 2022 model year Sequoia, 2018 ? 2023 model year Tacoma, and 2018 ? 2021 model year Tundra vehicles are equipped with Pre-collision System (PCS) and Dynamic Radar Cruise Control (DRCC) as part of the Toyota Safety Sense (TSS) package. The PCS and DRCC systems are designed to help mitigate a potential collision and maintain a pre-determined traveling distance. It is recommended to disable the PCS and DRCC systems on vehicles that have been modified (ride height, oversized wheels/tires, brush bars, etc.) in a way that potentially disrupts the functionality of these systems. Vehicle owner?s written consent is required before performing the calibration to permanently disable the PCS and DRCC systems. Follow the Repair Procedure in this bulletin to disable the PCS and DRCC systems.
• 10246039FAQ: Certain 2016-2022 Model Year Tacoma Vehicles Painted with Super White (040) Paint Color Coverage for Paint Peeling on Door Frames + Front Inner Fenders Frequently Asked Questions
• 10246038RL: Toyota has received some reports of paint peeling along the exterior door window frames and front inner fenders under the hood on certain Tacoma vehicles with 040 Super White paint color.
• 10246037DP: Toyota has received some reports of paint peeling along the exterior door window frames and front inner fenders under the hood on certain Tacoma vehicles with 040 Super White paint color.
• 10244115TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks
• 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.

Every Toyota Tacoma model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.