2011 Toyota Tacoma
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Tacoma › 2011
These records cover every 2011 Toyota Tacoma. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
9 recalls name the 2011 Toyota Tacoma. Newest first.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2011-2016 Toyota Tacoma and 4Runner vehicles equipped with accessory hood scoops installed by SET or SET dealers. The adhesive attaching the hood scoop may weaken, allowing the hood scoop to detach from the vehicle.
Risk and remedy
Risk
If the hood scoop detaches, it may become a road hazard, increasing the risk of a crash.
Remedy
SET will notify owners, and dealers will mechanically fasten the scoop to the hood, free of charge. The recall began on September 1, 2017. Owners may contact SET customer service at 1-954-429-2000. SET's number for this recall is SET17B.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010…
Risk and remedy
Risk
If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
Remedy
SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion…
Risk and remedy
Risk
Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
Remedy
SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2005-2011 Toyota Tacoma Pre-Runner and 4x4 vehicles manufactured September 14, 2009, to October 11, 2010. In the affected vehicles, one of the leaf springs may fracture due to stress or corrosion. While being driven, the broken leaf could move out of position and contact…
Risk and remedy
Risk
If the fuel tank leaks fuel from being punctured, there is an increased risk of a fire.
Remedy
Toyota will notify owners and dealers will install new rear leaf spring assemblies. The recall began on January 29, 2016. Owners may contact Toyota customer service at 1-800-331-4331.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2008-2014 FJ Cruiser and Tacoma vehicles equipped with accessory wheels and tires installed by Toyota or dealers prior to the vehicle's first sale. The affected vehicles may list incorrect spare tire size and/or cold tire inflation information on the tire placard. As such…
Risk and remedy
Risk
If the spare tire is inflated to the incorrect pressure provided on the placard, tire failure may occur while it is being driven on, increasing the risk of a crash.
Remedy
For the involved vehicles, overlay stickers to correct the tire placard will either be mailed to owners or provided to dealers for placement over the incorrect information on the placard. The recall is expected to begin in September 2014. Owners may contact Toyota customer service at 1-800-331-4331.
Toyota is recalling certain model year 2005-2010 Tacoma Access Cab vehicles manufactured September 14, 2004, through March 29, 2010; and model year 2011 Tacoma Access Cab vehicles manufactured July 1, 2010, through September 7, 2011. If the access doors are repeatedly and forcefully closed, the screws that attach the seat belt pre-tensioner to the seat belt…
Risk and remedy
Risk
If the seat belt pre-tensioner detaches from the seat belt assembly, the seat belt pre-tensioner will not perform as designed, increasing the risk of injury in a severe crash.
Remedy
Toyota will notify owners, and dealers will inspect the seat belt assemblies. Based on the inspection, the seat belt assembly will be replaced or new pre-tensioner screws will be installed with thread-locking sealant and a retractor spring cover with stopper ribs to prevent loosening of the screws. These services will be provided at no cost to the owner. The recall began during February 2014. Owners may contact Toyota at 1-800-331-4331.
Southeast Toyota is recalling certain model year 2008 and 2010-2013 Toyota Tundra, 2010-2012 Rav4, 2012 Toyota Sequoia, 2010-2011 Toyota Corolla, 2010-2011 Toyota Camry and Camry Hybrid, 2010-2013 Toyota Highlander and Highlander Hybrid, 2010-2013 Toyota FJ Cruiser, 2011 Toyota Land Cruiser, 2010-2013 Toyota Venza, 2010-2011 Toyota 4Runner, 2010-2013 Toyota…
Risk and remedy
Risk
An inaccurate label could lead to owners overloading their vehicles and tires. An overloaded vehicle can result in a tire failure which may result in a vehicle crash, personal injury, or property damage.
Remedy
Southeast Toyota will notify owners and provide a corrected label with instructions concerning its installation. A small group of the affected vehicles will need additonal remedies which are still being developed. The recall began on May 28, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013…
Risk and remedy
Risk
If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. This could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.
Remedy
Southeast Toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on March 21, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Toyota IS recalling certain model year 2008 through 2011 FJ cruiser, land cruiser, tacoma, sequoia and tundra vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 138, "tire pressure monitoring system (TPMS)." when factory-installed wheels and tires were replaced with toyota authorized accessory wheels and LT…
Risk and remedy
Risk
Failure to warn of tire deflations IS a non-compliance with fmvss 138 and could lead to tire failure increasing the risk of a crash.
Remedy
For the land cruiser, sequoia, tacoma and tundra vehicles, the dealer will re-calibrate the tire pressure monitoring system on affected vehicles and install an updated tire and loading information label at no charge. for the FJ cruiser vehicles, the TPMS cannot be reset so the electronic control unit (ecu) for the TPMS will be replaced. toyota IS currently developing the remedy ecu. if an owner IS not certain whether his or her vehicle IS equipped with these accessories, please contact any toyota dealer for an inspection at no charge. the safety recall began on march 31, 2011. owners may contact toyota at 1-800-331-4331.
Owner complaints
186 complaints8 involved a crash6 involved a fire7 injuries2 deaths
What owners report most
Latest complaints
- Air bags
I purchased a vehicle from a car dealer "as is" with a clean title. About two months after purchase I took it to a mechanic after I got an airbag light and he told me the vehicle was missing airbags and was in a hard enough collision that it caused the airbags to deploy. This was not listed on the Carfax report and was not disclosed to me. I would have never purchased a vehicle if I knew it was missing airbags.
- Suspension
The contact owns a 2011 Toyota Tacoma. While inspecting underneath the vehicle, the contact discovered that the vehicle was only equipped with three leaf springs instead of four. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was made aware of the…
The contact owns a 2011 Toyota Tacoma. While inspecting underneath the vehicle, the contact discovered that the vehicle was only equipped with three leaf springs instead of four. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was made aware of the failure and informed the contact that there was no recall for the failure associated with the VIN. The failure mileage was unknown.
- Air bags
The contact owns a 2011 Toyota Tacoma. The contact stated that over time the horn intermittently became inoperable; however, the horn operated while in the middle of making a turn. The contact was concerned about the failure because the horn and the air bag in the steering wheel were connected by…
The contact owns a 2011 Toyota Tacoma. The contact stated that over time the horn intermittently became inoperable; however, the horn operated while in the middle of making a turn. The contact was concerned about the failure because the horn and the air bag in the steering wheel were connected by the clockspring. No warning lights were illuminated. The local dealer was contacted; however, the vehicle was not diagnosed or repaired because the VIN was not associated with a recall related to the failure. The local dealer confirmed that the VIN was not included in a recall related to the failure. The manufacturer was notified of the failure. The failure mileage was 88,000.
- Structure · Suspension
The contact owns a 2011 Toyota Tacoma. The contact stated that while performing a routine engine oil change, extensive corrosion was observed across the entire undercarriage. The severe rust damage fully compromised the vehicle's structural frame, control arms, and several underbody components. The…
The contact owns a 2011 Toyota Tacoma. The contact stated that while performing a routine engine oil change, extensive corrosion was observed across the entire undercarriage. The severe rust damage fully compromised the vehicle's structural frame, control arms, and several underbody components. The dealer was not notified of the failure, but the vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 200,000.
- Unknown or other
Chassis recall under Toyota Recall Program ZKA/LSC K0D. While the window of this recall closed in 2017, my vehicle was sold to me several years after 2017. The vehicle chassis is in a critical state and is likely to snap in half. I have sent a letter and photos to: Toyota Motor Corp., Federal…
Chassis recall under Toyota Recall Program ZKA/LSC K0D. While the window of this recall closed in 2017, my vehicle was sold to me several years after 2017. The vehicle chassis is in a critical state and is likely to snap in half. I have sent a letter and photos to: Toyota Motor Corp., Federal Highway Admin, Toyota Clearwater, Consumer Financial Protection Bureau, FL House of Rep and BBB Natl Programs. All of the above were sent via trackable and signature required USPS. The vehicle should have been prohibited from any resale if the recall can be closed. As i understand it, technically there should be no expiration date on a significant failure. I do not have $13,000 to get a new vehicle and I do not want to resell to shift the risk to someone else. At minimum Toyota should be forced to buy back the vehicle , replace the chassis or offer a safe used replacement option. Please help me understand where I go from here. Looking for your support and resolution.
- Suspension
2011 Tacoma, 4x4. Leaf spring is broken on the passenger side. 130,000 miles. According to Toyota my vin is not included under recall 14V-604. I do believe this is either an error or deliberate oversight to avoid responsibility. Manufacturer date 05/11 so according to the recall notice it falls within the date range but not the effected Vins.
- Service brakes · Suspension
I purchased the truck December 6th 2025 within a thousand Miles within the end of the year I experienced brake failure on the highway I laid under the truck to patch the brake failure and found a cracked leaf spring suspension component which there's already a recall for that exact make and model…
I purchased the truck December 6th 2025 within a thousand Miles within the end of the year I experienced brake failure on the highway I laid under the truck to patch the brake failure and found a cracked leaf spring suspension component which there's already a recall for that exact make and model just not my VIN number for that cracked leaf spring there was a recall for frame rust and just rust in general and my brake lines rusted out but a certified technician from the used car dealership said it was safe and road Worthy I experienced a brake fire on the front calipers shortly after this brake failure the fire caused 7800 worth of damage I got quoted from Toyota to fix it and that doesn't cover the $2,000 worth of leaf springs which there was already an exact recall for this exact model of truck for the exact damage depicted but somehow my VIN is not applicable for this repair.
- Structure › Frame and members
The contact owns a 2011 Toyota Tacoma. The contact stated that while attempting to have an inspection completed on the vehicle, the contact was informed by the mechanic that the inspection could not be completed due to several holes in the underbody frame of the vehicle. The dealer was not…
The contact owns a 2011 Toyota Tacoma. The contact stated that while attempting to have an inspection completed on the vehicle, the contact was informed by the mechanic that the inspection could not be completed due to several holes in the underbody frame of the vehicle. The dealer was not contacted. The vehicle was not repaired. The manufacturer was informed of the failure. The manufacturer referred the contact to the NHTSA Hotline to report the failure. The failure mileage was approximately 168,000.
- Electrical system
Blower Fan had been cutting off. Only running intermittent on High. Took to Toyota dealer June 2025. Was told it was a Cabin Air Filter Clogged. Paid for replacement and clean out of system. Continued to not work. Called a mechanic and asked for a diagnostic. Was told it was a “known issue”…
Blower Fan had been cutting off. Only running intermittent on High. Took to Toyota dealer June 2025. Was told it was a Cabin Air Filter Clogged. Paid for replacement and clean out of system. Continued to not work. Called a mechanic and asked for a diagnostic. Was told it was a “known issue” with Toyota Tacomas. Had been a recall in later years. I ordered the blower motor resistor and wiring harness from Toyota parts department. It was on back order due to the issue being widespread. July 2025 parts came in. Returned truck to the shop. The techichian replaced the motor blower resistor and the new wiring harness. However, he cut the burnt wires off and spliced the new wires into old wires back to the motor. Aug 2025 motor has stopped working again. Back to the Toyota shop. The truck needs a new blower motor. The labor will be 1200. Plus the labor I’ve already paid for three other shop visits plus parts. The motor blower is on back order till mid September. The motor has been let unplugged due to “risk of fire”. But I’ve been given the vehicle again to drive. It has had a risk of fire since June. The wires have been overheating and smelling. This should have been a recall in 2011. Just as it was in the later Toyota Tacoma. Pleas investigate
- Fuel/propulsion system · Structure › Body
The underside of my 2011 Toyota Tacoma is experiencing tremendous rust. Dealer said since there was not perforation, nothing to be done. Brackets holding wiring, body panels and now gas tank have rusted and failed. The gas tank strap is a major concern. It is available for inspection. The gas tank…
The underside of my 2011 Toyota Tacoma is experiencing tremendous rust. Dealer said since there was not perforation, nothing to be done. Brackets holding wiring, body panels and now gas tank have rusted and failed. The gas tank strap is a major concern. It is available for inspection. The gas tank is held up now by one unrusted strap and rubber bungee cords I applied. Dealer or independence service center has not seen it. Nearest dealer is a ferry ride away, I live on an island. No inspection by manufacturer etc. No warning lights or messages.
- Suspension · Unknown or other
I am the third owner of a 2011 Toyota Tacoma Access Cab 2.7L. I purchased it in Oct. 2024 in NY. At that time, there were no visible signs of frame rust. Within 6 months, it developed severe corrosion, including deterioration at the suspension mounts. The vehicle is no longer safe to drive and is…
I am the third owner of a 2011 Toyota Tacoma Access Cab 2.7L. I purchased it in Oct. 2024 in NY. At that time, there were no visible signs of frame rust. Within 6 months, it developed severe corrosion, including deterioration at the suspension mounts. The vehicle is no longer safe to drive and is available for inspection. Toyota previously recalled earlier Tacomas for the same issue, but for 2011–2017 models, they issued a Limited Service Campaign (K0D) and Customer Support Program (ZKA), which expired after only 12 years (vs. 15 years previously). This was not classified as a recall, despite serious safety concerns. The prior owner appears to have driven zero miles from 2020–2022, when the campaign was active. The vehicle was registered in Vermont, where statewide COVID restrictions closed dealerships and suspended non-essential services. No extension or accommodations were provided by Toyota. I discovered the corrosion on [XXX], during a frame inspection immediately after investing $4,800 in bodywork. The mechanic noted the corrosion was extensive and abnormal for a 2011 model—more consistent with a truck from the 1980s. Toyota’s decision to time this campaign at the height of COVID and shorten the eligibility window appears negligent and possibly strategic. Now in 2025, many owners are finding catastrophic frame rot after Toyota's limited program has ended. I urge NHTSA to investigate this as a true safety defect, not a service courtesy. Owner testimonials of frame failure after expiration: [XXX] [XXX] [XXX] [XXX] [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Carry handle, shell, base · Chest clip, buckle, harness
The locking mechanism, the vechile was park we put the child in to turn it rear facing and it wouldn’t lock into place, so we turned it forward facing and it still wouldn’t lock into place. The child’s seat will not lock into position. Then we noticed where the lock off is the plastic is bent…
The locking mechanism, the vechile was park we put the child in to turn it rear facing and it wouldn’t lock into place, so we turned it forward facing and it still wouldn’t lock into place. The child’s seat will not lock into position. Then we noticed where the lock off is the plastic is bent upward from the seat belt itself. The chest clip is also Magnetic and had to be replaced all ready by manufacturer due to it not latching. This will not let me upload the video
- Unknown or other
Severe Frame rust
- Structure
The contact owns a 2011 Toyota Tacoma. The contact stated that while working underneath the vehicle, he noticed a hole in the frame rail, passenger's side, rear of the vehicle. The vehicle was taken to a local dealer where it was inspected under a Service Bulletin however, the vehicle was not…
The contact owns a 2011 Toyota Tacoma. The contact stated that while working underneath the vehicle, he noticed a hole in the frame rail, passenger's side, rear of the vehicle. The vehicle was taken to a local dealer where it was inspected under a Service Bulletin however, the vehicle was not repaired. The manufacturer was made aware of the failure; however, the manufacturer confirmed that the vehicle was no longer under Warranty for the repair and a case was opened. The vehicle was not repaired. The failure mileage was approximately 150,000.
- Steering
Steering shaft u- joint seizure causing loss of vehicle steering. Very dangerous.
- Unknown or other
The horn on my truck no longer works. Cruise control is intermittent at times. Vehicle was taken to my independent repair shop I've been told it is the clock spring in my steering wheel. My concern is the air bag would quit working. Been told same vehicle from 2012 and newer was fixed by Toyota for same problem.
- Exterior lighting
1.) Headlights are yellowing. 2.) Hard to see at night. 3.) Everyone has the same problem. The government should mandate going back to glass headlights for safety reasons. Buffing them only lasts a short period of time and the elderly can't afford to buy new OEM headlights every 6 years as they…
1.) Headlights are yellowing. 2.) Hard to see at night. 3.) Everyone has the same problem. The government should mandate going back to glass headlights for safety reasons. Buffing them only lasts a short period of time and the elderly can't afford to buy new OEM headlights every 6 years as they are very, very expensive. This is a safety issue, as yellow lenses equal more nighttime accidents, fact. This should have been addressed years ago.
- Steering · Suspension
The contact owns a 2011 Toyota Tacoma. The contact stated that after taking the vehicle for repair, the contact was made aware of rust on the steering shaft and the support arms and the front end of the vehicle. The contact took the vehicle to the dealer and the contact was informed that there was…
The contact owns a 2011 Toyota Tacoma. The contact stated that after taking the vehicle for repair, the contact was made aware of rust on the steering shaft and the support arms and the front end of the vehicle. The contact took the vehicle to the dealer and the contact was informed that there was no fix for the failure. The vehicle had not been repaired. The manufacturer was made aware of the failure. The approximate failure mileage was 144,000.
- Suspension
My vehicle failed the state of Maine safety inspection due to a broken leaf spring. I had the vehicle further inspected at a Toyota dealership and they reported the same issue. They gave me an estimate to replace the rear springs for a total cost to me of $2321.00. This an expense that I do not…
My vehicle failed the state of Maine safety inspection due to a broken leaf spring. I had the vehicle further inspected at a Toyota dealership and they reported the same issue. They gave me an estimate to replace the rear springs for a total cost to me of $2321.00. This an expense that I do not believe should have to bare, as this vehicle is only used for personal use. The heaviest load this vehicle has carried is a few bags of fertilizer.
- Power train
Vehicle was brought to dealer to replace ROTTED transmission cooler lines. During inspection it was noticed that the vehicles rack & pinion steering tube is almost completely ROTTED through as well, this is a complicated and expensive repair, which if it completely fails will render the vehicle…
Vehicle was brought to dealer to replace ROTTED transmission cooler lines. During inspection it was noticed that the vehicles rack & pinion steering tube is almost completely ROTTED through as well, this is a complicated and expensive repair, which if it completely fails will render the vehicle unsafe for the road, a danger to myself and others on the road. The vehicle has only 127,000 miles. I was also informed that the vehicle no longer qualifies for frame replacement under recall ' because I waited too long '
- Structure › Body · Suspension
Toyota Tacoma was sprayed in 2020 for frame rust. Rust has began again on the frame. Also the suspension and behind the two rear wheels rust is rampant. Lots and lots of rust but no new holes since was sprayed. Pictures attached of the 2011 Toyota Tacoma with 68,000 miles.
- Exterior lighting › Headlights
The contact owns a 2011 Toyota Tacoma. The contact stated that the driver's and passenger's side headlights were inoperable. Upon inspection, the contact noticed that the headlight assemblies were extremely hot and had melted. The vehicle was taken to the dealer where it was diagnosed that the…
The contact owns a 2011 Toyota Tacoma. The contact stated that the driver's and passenger's side headlights were inoperable. Upon inspection, the contact noticed that the headlight assemblies were extremely hot and had melted. The vehicle was taken to the dealer where it was diagnosed that the driver's and passenger's side headlight assemblies needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 210,000.
- Electrical system · Structure › Body · Unknown or other
This VIN number was totaled due to a bent frame after being rear ended on June 10th. I fear my insurance company (USAA) will attempt to commit fraud by not reporting the title as salvage.
- Structure › Frame and members › Underbody shields
The contact owns a 2011 Toyota Tacoma. Upon purchase of the vehicle, the contact received a Carfax report from the independent dealer that the vehicle had been placed under a service campaign for frame corrosion. The contact took the vehicle to a dealer where he was denied the service campaign…
The contact owns a 2011 Toyota Tacoma. Upon purchase of the vehicle, the contact received a Carfax report from the independent dealer that the vehicle had been placed under a service campaign for frame corrosion. The contact took the vehicle to a dealer where he was denied the service campaign because his vehicle was in a non-cold climate state. The manufacturer was also notified, and also denied his claim. The contact stated that he had discovered corrosion on the sub frame of the vehicle. The vehicle was not repaired. The failure mileage was unknown.
- Air bags · Electrical system · Unknown or other
My vehicle failed va inspection due to the horn not working. I have to get the spiral cable replaced per the auto repair shop. this was a recall on tacoma's up to 2009 (recall b1801) but not my year. my year should be part of the recall. I believe this also impacts the airbag deployment from the steering wheel.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251757Ti: K0D expired on 10/31/2023. Technical instructions for limited service campaign K0D frame corrosion resistant compound (crc) application certain 2016 ? 2017 model year tacoma
- 10251756K0D expired on 10/31/2023.
- 10251755DP: K0D expired on 10/31/2023. Toyota has received reports regarding frame corrosion perforation on 2011 ? 2017 model year Tacoma vehicles. In these reports, customers have indicated that vehicles operated in specific cold climate areas with high road salt usage may exhibit more-than-normal corrosion to the vehicle?s frame. This condition is unrelated to and separate from normal surface rust which is commonly found on metallic surfaces after some years of usage and/or exposure to the environment.
- 10251742Ti: K0D expired on 10/31/2023. Technical instructions for limited service campaign K0D frame corrosion resistant compound (crc) application certain 2011 ? 2015 model year tacoma
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10244108TSB: Some 2005 ? 2023 model year Tacoma vehicles equipped with a manual transmission may exhibit a squeak or creak noise from the clutch pedal when it is depressed or released.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10238142DL: Toyota has received a number of reports regarding vehicle frame corrosion perforation on certain 2011-2017 model year Tacoma vehicles. These reports have indicated that these vehicles, when operated in specific cold climate areas (Cold Climate States1) with high road salt usage, or exposed to other environmental factors, may exhibit more-than-normal corrosion to the vehicle?s frame. Although perforation of the vehicle?s frame is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to vehicle frame corrosion perforation. A separate program (limited Service Campaign K0D) will include CRC (Corrosion Resistant Compound) application. CRC application will be covered under Limited Service Campaign (LSC K0D) for a period of two years and will only be available for vehicles registered/regularly operated in the Cold Climate States that do not meet vehicle frame replacement criteria.
- 10238141DP: Toyota has received a number of reports regarding vehicle frame corrosion perforation on certain 2011-2017 model year Tacoma vehicles. These reports have indicated that these vehicles, when operated in specific cold climate areas (Cold Climate States1) with high road salt usage, or exposed to other environmental factors, may exhibit more-than-normal corrosion to the vehicle?s frame. Although perforation of the vehicle?s frame is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to vehicle frame corrosion perforation. A separate program (limited Service Campaign K0D) will include CRC (Corrosion Resistant Compound) application. CRC application will be covered under Limited Service Campaign (LSC K0D) for a period of two years and will only be available for vehicles registered/regularly operated in the Cold Climate States that do not meet vehicle frame replacement criteria.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10224147DP: Toyota has received reports regarding frame corrosion perforation on 2011 ? 2017 model year Tacoma vehicles. In these reports, customers have indicated that vehicles operated in specific cold climate areas with high road salt usage may exhibit more-than-normal corrosion to the vehicle?s frame. This condition is unrelated to and separate from normal surface rust which is commonly found on metallic surfaces after some years of usage and/or exposure to the environment.
- 10224130DP: Toyota has received reports regarding frame corrosion perforation on 2011 ? 2017 model year Tacoma vehicles. In these reports, customers have indicated that vehicles operated in specific cold climate areas with high road salt usage may exhibit more-than-normal corrosion to the vehicle?s frame. This condition is unrelated to and separate from normal surface rust which is commonly found on metallic surfaces after some years of usage and/or exposure to the environment
- 10224108TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10220205DP: Toyota has received reports regarding frame corrosion perforation on 2011 ? 2017 model year Tacoma vehicles. In these reports, customers have indicated that vehicles operated in specific cold climate areas with high road salt usage may exhibit more-than-normal corrosion to the vehicle?s frame. This condition is unrelated to and separate from normal surface rust which is commonly found on metallic surfaces after some years of usage and/or exposure to the environment
- 10220183TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10220159DP: Toyota has received reports regarding frame corrosion perforation on 2011 ? 2017 model year Tacoma vehicles. In these reports, customers have indicated that vehicles operated in specific cold climate areas with high road salt usage may exhibit more-than-normal corrosion to the vehicle?s frame. This condition is unrelated to and separate from normal surface rust which is commonly found on metallic surfaces after some years of usage and/or exposure to the environment
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
Every Toyota Tacoma model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.