2003 Toyota Tacoma
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Tacoma › 2003
These records cover every 2003 Toyota Tacoma. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
5 recalls name the 2003 Toyota Tacoma. Newest first.
Toyota is recalling certain model year 2001 through 2004 Tacoma light trucks manufactured from August 28, 2000, through August 27, 2004, and originally sold, or currently registered, in the following cold climate states with high road salt usage: Connecticut, Delaware, Illinois, Indiana, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, New…
Risk and remedy
Risk
Corrosion of the plate could cause it to break, which could result in detachment of the spare tire from the vehicle. Detachment of the spare tire could result in a road hazard which may increase the risk of a vehicle crash.
Remedy
Toyota will notify owners, dealers will inspect the vehicle and replace the spare tire carrier lift plate as necessary, free of charge. The recall began in February 2013. Owners may contact their Toyota dealer or the Toyota Customer Experience Center at 1-800-331-4331.
Certain aj motorsport combination lamps sold as replacement lamps for use on the above listed passenger vehicles. combination lamps not equipped with amber side reflectors fail to conform with the requirements of federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
Risk and remedy
Risk
Lack of amber side reflectors in the lamps will decrease lighting visibility to other drivers and may possibly result in a vehicle crash.
Remedy
Aj motorsport will notify owners and offer reimbursement for the lamps. the recall began on july 31, 2006. owners may contact aj motorsport at 626-618-2026.
Certain pro-a motors corner lamps, turn signals, and headlights sold as replacement lamps for use on certain passenger vehicles listed above. some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
Risk and remedy
Risk
Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.
Remedy
Pro-a motors will notify owners and offer to repurchase the lamps. the recall began on april 3, 2006. owners may contact pro-a motors at 323-838-2988.
On certain sport utility vehicles, due to a manufacturing issue in the front suspension lower ball joint, there IS a possibility that the surface of the ball of the joint may have been scratched. the ball joint may eventually experience excessive wear and looseness, resulting in increased steering effort.
Risk and remedy
Risk
The lower ball joint may separate from the knuckle causing loss of steering control and a crash could occur.
Remedy
Dealers will replace the front suspension lower ball joints free of charge. the recall began on july 5, 2005. owners may contact toyota at 1-800-331-4331.
On certain pickup trucks, during side impact ncap test (i.e. Lincap test), a flange at the rear end of the double cab body deformed and interfered with the fuel inlet hose that connects the fuel filler pipe and fuel tank, resulting in damage to the fuel inlet hose.
Risk and remedy
Risk
This damage could result in fuel leakage, which could result in a fire if in the presence of an ignition source.
Remedy
Dealers will install a fuel hose protector on the body flange. owner notification began june 3, 2003. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact toyota at 1-800-331-4331.
Owner complaints
360 complaints30 involved a crash1 involved a fire21 injuries
What owners report most
Latest complaints
- Air bags · Seat belts
I was traveling on highway 12 at 60 mph when the seat belts exploded and cinched up tight to child safety lock mode. There was an odor of burning wires/electrical.
- Steering · Suspension
I took my 2003 Toyota Tacoma and for a tire alignment and was told by an employee of the tire shop that my rack and pinion needed to be replaced and lower ball joints. I checked the VIN number and it said I have zero recalls, but there is a general recall on this make a model that I have what do I…
I took my 2003 Toyota Tacoma and for a tire alignment and was told by an employee of the tire shop that my rack and pinion needed to be replaced and lower ball joints. I checked the VIN number and it said I have zero recalls, but there is a general recall on this make a model that I have what do I do? I also have the steering has a lot of play whenever I go for a bump in the road like the tires catch the road so I kind of swerve a little bit and I feel that it’s very unsafe to me and other drivers.
- Suspension
Invoice no. XXX Frame recall. I have a receipt stating…”J# 20TOZFRAM,;CS FRAM Inspection TECY(S):351 Warrenty inspected Frame, Frame failed, perforation, Replaced Frame at Dealer”. Except they did not replace the frame, I have a receipt stating they replaced the “ spare tire rack assembly. Now…
Invoice no. XXX Frame recall. I have a receipt stating…”J# 20TOZFRAM,;CS FRAM Inspection TECY(S):351 Warrenty inspected Frame, Frame failed, perforation, Replaced Frame at Dealer”. Except they did not replace the frame, I have a receipt stating they replaced the “ spare tire rack assembly. Now, my frame is so rusted it will not pass inspection next September. It has been welded already, at the tune of $2500.00. This truck has 122,000 miles. I want the truck fixed. I’ve been in touch with the BBB and the attorney general, and others. The attorney general suggested I get a lawyer. This is a a gross deception from the Orleans Dealer in [XXX] . INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Structure › Body · Suspension
While driving at both high speeds (highway) and local road speed limits, Toyota Tacoma's rear passenger side frame split completely in half. While performing maneuvers such as right turns, vehicle wobbled and I, driver, lost temporary control of vehicle. Upon further inspection, rear driver side…
While driving at both high speeds (highway) and local road speed limits, Toyota Tacoma's rear passenger side frame split completely in half. While performing maneuvers such as right turns, vehicle wobbled and I, driver, lost temporary control of vehicle. Upon further inspection, rear driver side frame also contains stress fractures which are symmetric to the rear passenger side of truck. Potential for accident has increased exponentially. Pictures provided. Brought evidence of clear safety hazard to local Metro Detroit dealership at 773 S Rochester Rd Unit B, Rochester Hills, MI 48307 on 04NOV25, and called Toyota Corporate on 05NOV25. Toyota Corporate neglected my concerns about safety hazard and potential harm to myself and family. Safety recall needs to be issued immediately. This issue stems from a well known recall from Toyota of Toyota Tacoma's, 1996-2004, which contained an OEM defect of excessive corrasion to the frames, causing premature failure of the frames due to excessive rust build up which impacts frame integrity and increases probability of failures such as observed in my case.
- Suspension
Prior to July, 2010, I received a letter from Toyota stating my Tacoma Frame was recalled. I wouldn’t have known otherwise. I set up an appointment with the Orleans Toyota dealer and set up an appointment. They gave me a loaner and had my truck for two weeks. I thought my frame had been replaced.…
Prior to July, 2010, I received a letter from Toyota stating my Tacoma Frame was recalled. I wouldn’t have known otherwise. I set up an appointment with the Orleans Toyota dealer and set up an appointment. They gave me a loaner and had my truck for two weeks. I thought my frame had been replaced. All this time went by and now my frame is dangerously rusted. Last year I spent $2500 getting it spot welded. This year the mechanic says he may not be able to pass it next time. This provoked me to research all my bills for the truck. What I found was unbelievable to me. I never looked at my billing receipt from Orleans Toyota, but believed the frame was done. Not the case. They replaced the 83341 Spare Tire Carrier 5092 Wpt. Part=04002-11204. My Tacoma has 122,000 on it now. I’m [XXX]. I cannot afford a new car payment . From what I understand there are 100s of people with the same problem of seriously rusted frames. I need your help. Thank youL [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Suspension
What component or system failed or malfunctioned, and is it available for inspection upon request? While driving over railroad tracks, the lower ball joint separated from its socket, which caused the CV axle shaft to break apart and led to the separation of the upper ball joint. As a result, the…
What component or system failed or malfunctioned, and is it available for inspection upon request? While driving over railroad tracks, the lower ball joint separated from its socket, which caused the CV axle shaft to break apart and led to the separation of the upper ball joint. As a result, the front driver's side tire folded under the fender, causing the truck to abruptly veer off the road and into the right shoulder All parts are available for inspection How was your safety or the safety of others put at risk? When the failure occurred, I was driving over a series of railroad tracks when the truck suddenly veered off the road onto the shoulder. This abrupt veering and stopping put my safety—and the safety of others—at risk, as the drivers behind me had to react suddenly to avoid a collision. Has the problem been reproduced or confirmed by a dealer or independent service center? The truck was serviced in 2006 in response to the recall, having the lower ball joints replaced, however the replacement parts may have failed Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? No Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? No
- Structure
The contact owns a 2003 Toyota Tacoma. The contact stated that while the vehicle was parked, the contact noticed that the rear subframe of the vehicle was corroded and the subframe had detached from the vehicle. The vehicle was towed to the residence. The dealer was contacted; however, the vehicle…
The contact owns a 2003 Toyota Tacoma. The contact stated that while the vehicle was parked, the contact noticed that the rear subframe of the vehicle was corroded and the subframe had detached from the vehicle. The vehicle was towed to the residence. The dealer was contacted; however, the vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure. The approximate failure mileage was 260,000.
- Structure › Frame and members
The contact owns a 2003 Toyota Tacoma. The contact stated that while the vehicle was parked, the contact became aware that the rear sub frame on the driver's and passenger's side were corroded. The dealer was contacted. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure and referred the contact to the NHSTA Hotline for assistance. The approximate failure mileage was 345,000.
- Structure › Body
The frame rusted through and there are holes in the frame The frame broke while my wife was driving home from work. Had to get it towed to the house No No No, no symptoms
- Air bags
I was getting on the freeway when my truck either got hit by someone or it sped up without me pressing the gas causing me to spin and catch the bushes on the side of the on-ramp where I rolled and slammed my front end continuing to roll 3 times. I broke my back due to the airbag failure to deploy
- Air bags
I was getting on the freeway and was hit by another driver (who fled the scene and didn’t get caught) and my truck spun around 180 before catching bushes and rolling three times smashing my front end and almost collapsing my roof and my airbags failed to deploy as well as my seatbelt tensioner not…
I was getting on the freeway and was hit by another driver (who fled the scene and didn’t get caught) and my truck spun around 180 before catching bushes and rolling three times smashing my front end and almost collapsing my roof and my airbags failed to deploy as well as my seatbelt tensioner not tightening resulting in me breaking my back in three spots. I was going approximately 35-45 mph and the first roll from the top of the embankment dropped about 15 which is where the front end got smashed due to being front heavy and this is where I broke my back before continuing to roll
- Structure › Body
Hello I Just wanted to check if my vehicle was ever in a crash. 2/29/24 VIN. [XXX] 03 Toyota Tacoma 2WD 4 cyl. EMail is [XXX] Thanks [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Structure › Body
This truck was sprayed for frame rust at Kern Toyota Winchester, Va 10/07/2010 a problem Toyota was very aware of and tried to put a band-aid on a known issue that would rust out and not pass inspection or worse yet cause a terrible accident or cause harm to driver/passengers or other drivers. We…
This truck was sprayed for frame rust at Kern Toyota Winchester, Va 10/07/2010 a problem Toyota was very aware of and tried to put a band-aid on a known issue that would rust out and not pass inspection or worse yet cause a terrible accident or cause harm to driver/passengers or other drivers. We have had another vehicle in the family by Toyota that they replaced the entire frame and now they state that is not true. However, we had a rental for over a month while they did replace entire frame for same issue. Now our above truck that is in wonderful shape nothing else wrong but frame that is rusted did not pass inspection requiring parts that need welded. So we have a good truck that only thing wrong is the issue Toyota knew they used faulty equipment/parts for.
- Structure › Frame and members · Suspension
The contact owns a 2003 Toyota Tacoma. The contact stated while driving at an undisclosed speed, the front driver’s side wheel detached from the vehicle. The contact was able to navigate the vehicle to safety. The vehicle was towed to an independent mechanic where it was diagnosed that the front…
The contact owns a 2003 Toyota Tacoma. The contact stated while driving at an undisclosed speed, the front driver’s side wheel detached from the vehicle. The contact was able to navigate the vehicle to safety. The vehicle was towed to an independent mechanic where it was diagnosed that the front driver’s side ball joint had failed and needed to be replaced. The contact was informed that the VIN was included in NHTSA Campaign Number: 05V225000 (Suspension). The vehicle was towed to the dealer where the vehicle remained and was diagnosed that the rear frame was rusted and needed to be replaced. The dealer informed the contact that the vehicle was included in an unknown warranty extension; however, the vehicle was not repaired. The manufacturer was notified of the failure, but no assistance was provided. The failure mileage was approximately 310,000.
- Unknown or other
The DARCARS Toyota dealership in Rckville, MD has refused to repair an outstanding safety recall issue for my 2003 Toyota PreRunner truck. I had received a recall notice from Toyota for my 2003 Toyota PreRunner. On July 21, 2023, I arrived for my 7:30 a.m. appt at DARCARS to get the spare tire…
The DARCARS Toyota dealership in Rckville, MD has refused to repair an outstanding safety recall issue for my 2003 Toyota PreRunner truck. I had received a recall notice from Toyota for my 2003 Toyota PreRunner. On July 21, 2023, I arrived for my 7:30 a.m. appt at DARCARS to get the spare tire lift carrier repaired. Although it was still within the eligible recall period, a very annoyed service manager told me that DARCARS would not repair it. Although I had made the appt 1+ weeks earlier, he told me no repair parts had been ordered in preparation for repairing the hazard. After I insisted the safety recall issue created a dangerous hazard for me and other drivers since the spare tire located underneath the truck might fall down onto the roadway while driving, he became angry and said the spare tire lift carriage must first be inspected (a 5-10 min inspection) to determine if corrosion on the lift was present. Since I had expected the dangerous part was going to be replaced, I agreed to the inspection. A Toyota service rep drove the truck to the service bays for an inspection. Although my appt was scheduled as the first day of the day, I waited over an hour with no response from the manager or the service rep. During this hour wait, I asked on at two occasions if the inspection was completed and was told "No" with no details provided. I finally walked outside to the back of the DARCARS dealership and discovered my truck had been sitting in a parking lot. No no one had bothered to inspect it. Due to the attitude of the DARCARS service manager, service rep, lack of communication, and the failure to have ordered any parts to repair the safety hazard, it became obvious that DARCARS had no intention of correcting the safety hazard. They intended to stall and make receiving the recall repairs as difficult as possible -- and requiring a second service visit. (Afterward, a non-Toyota mechanic performed a inspection and confirmed the lift carrier are severely corroded.)
- Structure › Body
We bought the truck used from a dealer about 10 -12 years ago. We've always taken good care of it, and kept it in a garage. It always passed inspection with no problems, and there is nothing wrong with the truck, except at the last inspection about 2 weeks ago the mechanic said the frame has…
We bought the truck used from a dealer about 10 -12 years ago. We've always taken good care of it, and kept it in a garage. It always passed inspection with no problems, and there is nothing wrong with the truck, except at the last inspection about 2 weeks ago the mechanic said the frame has completed rusted through and the truck is not safe to drive. We can't get it fixed. I called Toyota and they said since it was no longer under warranty, too bad. They did "open a case" for us and I'm supposed to hear back from them next week, but I don't have much hope that they will do anything. The truck only has about 90,000 miles on it, despite being 20 years old. It is in good shape in every other way.
- Air bags · Steering · Suspension
I was driving home on March 10 2023 well out of no where my Toyota Tacoma something on the front end suspension broke it looks to me the recal that Toyota fixed before I even got the truck well sent me into 3 trees head on 55mph no airbag deployed I didn't have a chance to try and stop the vehicle I thought I was going to die I know the road I was on isn't the best shape I need help
- Vehicle speed control › Accelerator pedal
The contact owned a 2003 Toyota Tacoma. The contact stated that while driving up the driveway at 5 MPH and turning into the garage, the accelerator pedal was depressed but went down to the floorboard and became stuck. The contact lost control of the vehicle, and the vehicle crashed into the fence…
The contact owned a 2003 Toyota Tacoma. The contact stated that while driving up the driveway at 5 MPH and turning into the garage, the accelerator pedal was depressed but went down to the floorboard and became stuck. The contact lost control of the vehicle, and the vehicle crashed into the fence gate and the corner of the neighbor's residence. The air bags did not deploy. There was no injury sustained. There was no police report filed. The vehicle was towed to a salvage yard, where it was totaled. The contact related the failure to NHTSA Campaign Number: 09V388000 (Vehicle Speed Control). The dealer and the manufacturer were not notified of the failure. The failure mileage was approximately 230,000.
- Structure › Frame and members · Tires
The contact owns a 2003 Toyota Tacoma. The contact received notification of the NHTSA Campaign Number: 12V542000 (Tires) and the vehicle was taken to the dealer for the recall repair; however, the dealer declined to perform the recall repair due to rust on the subframe, and the spare tire carrier…
The contact owns a 2003 Toyota Tacoma. The contact received notification of the NHTSA Campaign Number: 12V542000 (Tires) and the vehicle was taken to the dealer for the recall repair; however, the dealer declined to perform the recall repair due to rust on the subframe, and the spare tire carrier needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the issue and the contact was advised to call the NHTSA Hotline. The failure mileage was approximately 236,000.
- Structure › Body
frame. We did have the frame checked a few times since we were made aware of the issue with rusted frames. Terrible noise. Technician says frame is being held to cap by two inches of rusted frame on both side just above rear wheel. Our repair person says of there was a recall, he can fix it. It…
frame. We did have the frame checked a few times since we were made aware of the issue with rusted frames. Terrible noise. Technician says frame is being held to cap by two inches of rusted frame on both side just above rear wheel. Our repair person says of there was a recall, he can fix it. It thought there was a recall. He said otherwise the truck looks perfect. We are original owers. have kept truck in perfect condition. This is our second toyota truck and fourth toyota car. I can't imagine you would not authorize/pay for frame replacement, new/used. we are crushed. please advise if you can authorize/pay for repair/replacement. Our repair person advised we should not drive for fear of truck splitting in half.
- Structure › Frame and members · Suspension
The contact owns a 2003 Toyota Tacoma. The contact stated that the entire subframe of the vehicle was rusted due to severe corrosion. There were no warning lights illuminated. The vehicle was taken to an independent mechanic who confirmed the subframe corrosion. The vehicle was not repaired. The…
The contact owns a 2003 Toyota Tacoma. The contact stated that the entire subframe of the vehicle was rusted due to severe corrosion. There were no warning lights illuminated. The vehicle was taken to an independent mechanic who confirmed the subframe corrosion. The vehicle was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 200,000. The VIN was not available. The contact stated that there was an opportunity to have the frame of the vehicle coated but that make the corrosion worse. The contact feels as though the vehicle is unsafe to drive.
- Air bags
The local dealership Cloninger Ford /Toyota told me that I need to replace the airbag ECU and Pretensioner on drivers side. The cost estimate was $1,500.00. I have seen that Toyota has given recalls on other models for this defect. I have a 2003 Toyota Tacoma. I am submitting this complaint…
The local dealership Cloninger Ford /Toyota told me that I need to replace the airbag ECU and Pretensioner on drivers side. The cost estimate was $1,500.00. I have seen that Toyota has given recalls on other models for this defect. I have a 2003 Toyota Tacoma. I am submitting this complaint with hopes for my case to be considered. The airbag light cam on on my truck 2 months ago and Cloninger Toyota replaced the front seat belt assy. and erased dics. This cured the problem (light on) for a few weeks. Please consider this issue for recall further than you have at this point.
- Air bags
Truck crashed into rocks on shoulder and rolled over. Driver side Windshield and roof crushed. Air bag did not deploy. Sheriff took a report of crash.HI213530034 Greenspot road. Highland , CA. Vehicle is in possession of coparts authorized by USAA insurance
- Steering · Suspension · Unknown or other
While driving, on the highway, the rear shock absorber support mount came loose, allowing the truck bed to come loose from the frame/chassis. Fortunately only the passenger side came loose, keeping the truck's bed attached to the rear of the truck I later found that this particular model has a…
While driving, on the highway, the rear shock absorber support mount came loose, allowing the truck bed to come loose from the frame/chassis. Fortunately only the passenger side came loose, keeping the truck's bed attached to the rear of the truck I later found that this particular model has a problem with Frame rot which generated a Toyota bulletin. I bought the truck from Toyota, as a used truck in 2011, but received no notifications of this potentially hazardous vehicle. If the bed had come loose at highway speed, any vehicle following the 2003 Toyota Tacoma truck would have been severely damaged or potentially resulted in the death of the people in the cars following behind me and the truck. There was a Toyota bulletin issued previously which was not disclosed to me at the time of purchase. The vehicle has been in Toyota shops regularly for inspections, maintenance and other repairs but the shop never mentioned anything about a "rusty" frame. Upon further research, I have found multiple Toyota Tacoma owners with similar issues with the frame. I believe Toyota knowingly manufactured and sold a defective product with serious potential safety issues. This vehicle either should be banned from the road for the safety of all drivers.
- Structure › Frame and members › Underbody shields
The contact owns a 2003 Toyota Tacoma. The contact stated while changing the oil, he noticed that the undercarriage of the vehicle was rusted which resulted in the sub-frame being compromised. The vehicle was diagnosed but not repaired. The manufacturer was informed of failure of the failure but offered no assistance. The failure mileage was approximately 140,000.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10197476Replacement vin plates.
- 10197473Product general information.
- 10190460Toyota Safety Recall and Service Campaign - Technician Certification Requirements
- 10190453TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10188913TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2021 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10187241TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10186195TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10177782TSB: OBSOLETE NOTICE June 23, 2020: This bulletin is now obsolete. Please see T-SB-0063-20.
- 10177781TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. ST005-01, SU001-08, and T-SB-0391-08. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Be sure to review the entire content of this service bulletin before proceeding. This Service Bulletin provides best practice procedures for vehicle pulling complaint, diagnosis, and repair for 2002 ? 2021 model year Toyota vehicles. This information supplements Repair Manual procedures when the symptoms are: ?Vehicle Pulling: The vehicle moves to the right or left when the driver holds the steering wheel while driving straight ahead without exerting steering effort. ?Steering Wheel Off Center: The vehicle travels straight, but the steering wheel is not pointed straight ahead. The vehicle is not pulling. Before repairing a vehicle pulling to one side, it is necessary to clearly identify the cause of the pulling condition. Frequently, pulling to one side is diagnosed as a wheel alignment concern. However, the actual cause may be related to the lateral force generated by the tires, vehicle damage, road crown or worn components. Performing a wheel alignment when tire force is the cause could result in the wheel alignment being set at a value outside of specifications. This could then cause other problems such as uneven tire wear, etc. A customer may notice a pull to the left when in the left lanes of travel and notice a pull to the right or no pull when traveling in the right lanes of travel on the very same section of roadway. This road crown effect is environmental and cannot be corrected with suspension adjustments or any other wheel or tire modification discussed in this bulletin.
- 10174891TSB: OBSOLETE NOTICE April 07, 2020: This bulletin is now obsolete. Please see T-SB-0032-20. Replacement Certification Labels and VIN Plates
- 10174890TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, T-SB-0144-08, and T-SB-0304-17. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10171405TSB: Vehicles may display evidence of a fluid leak or fluid seep from powertrain components. This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address the condition. NOTE This bulletin applies to ALL powertrain fluids excluding fuel and coolant.
- 10164330TSB: REVISION NOTICE July 01, 2019 Rev2: ? Applicability has been updated to 2019 ? 2020 model year Toyota vehicles. ? The Techstream Preparation and Process Overview sections have been updated. October 30, 2017 Rev1: ? Applicability has been updated to include 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0012-13. Service Bulletin No. T-SB-0012-13 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. NOTE ECU is a Toyota term used to describe integrated computerized devices responsible for managing the operation of a system or subsystem. For the purposes of this bulletin, the term ?ECU? is used as a generic label for the following SAE J1930 standard references: ? Powertrain Control Module (PCM) ? Engine Control Module (ECM) ? Transmission Control Module (TCM) ? Any other Toyota specific control unit
- 10152245Technical Instructions: This Limited Service Campaign has expired as of January 31, 2017.
- 10152244Dealer Package: This Limited Service Campaign has expired as of January 31, 2017.
- 10152205TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0101-11. Applicability has been updated to include 2016 ? 2017 model year vehicles. Service Bulletin No. T-SB-0101-11 is Obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.
- 10150418TSB: Supersession Notice. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.
- 10149217TSB: Supersession Notice. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.
- 10145776Update on Technician Certification Requirements.
- 10145749Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.
- 10145748Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.
Every Toyota Tacoma model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.