2009 Toyota Tacoma
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Tacoma › 2009
These records cover every 2009 Toyota Tacoma. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
13 recalls name the 2009 Toyota Tacoma. Newest first.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010…
Risk and remedy
Risk
If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
Remedy
SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion…
Risk and remedy
Risk
Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
Remedy
SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2005-2011 Toyota Tacoma Pre-Runner and 4x4 vehicles manufactured September 14, 2009, to October 11, 2010. In the affected vehicles, one of the leaf springs may fracture due to stress or corrosion. While being driven, the broken leaf could move out of position and contact…
Risk and remedy
Risk
If the fuel tank leaks fuel from being punctured, there is an increased risk of a fire.
Remedy
Toyota will notify owners and dealers will install new rear leaf spring assemblies. The recall began on January 29, 2016. Owners may contact Toyota customer service at 1-800-331-4331.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2008-2014 FJ Cruiser and Tacoma vehicles equipped with accessory wheels and tires installed by Toyota or dealers prior to the vehicle's first sale. The affected vehicles may list incorrect spare tire size and/or cold tire inflation information on the tire placard. As such…
Risk and remedy
Risk
If the spare tire is inflated to the incorrect pressure provided on the placard, tire failure may occur while it is being driven on, increasing the risk of a crash.
Remedy
For the involved vehicles, overlay stickers to correct the tire placard will either be mailed to owners or provided to dealers for placement over the incorrect information on the placard. The recall is expected to begin in September 2014. Owners may contact Toyota customer service at 1-800-331-4331.
Toyota is recalling certain model year 2006-2008 RAV4, 2006-2010 Yaris, 2008-2010 Highlander, and 2009-2010 Tacoma, Corolla, Corolla Matrix and General Motors Pontiac Vibe vehicles. In the affected vehicles, the steering column assembly contains electrical connections to the driver's airbag module housed in a spiral cable assembly, which includes a…
Risk and remedy
Risk
If the FFC is damaged, connectivity to the driver's air bag module could be lost and the air bag deactivated. The failure of the driver's air bag to deploy in the event of a crash that typically necessitates deployment increases the risk of injury to the driver.
Remedy
Toyota will notify the Toyota vehicle owners, and General Motors will notify the Pontiac Vibe owners. Toyota sent owners an interim notification letter in May 2014 to advise owners of the recall. Toyota will mail owners a second letter when remedy parts are available. General Motors sent Pontiac Vibe owners an Interim letter on June 20, 2014 notifying them that parts are currently unavailable. General Motors sent notices to the Pontiac Vibe owners on September 15, 2014, that a remedy is available. The recall began on October 27, 2014. Owners may contact Toyota at 1-800-331-4331. Owners may contact General Motors at 1-800-762-2737.
Toyota is recalling certain model year 2005-2010 Tacoma Access Cab vehicles manufactured September 14, 2004, through March 29, 2010; and model year 2011 Tacoma Access Cab vehicles manufactured July 1, 2010, through September 7, 2011. If the access doors are repeatedly and forcefully closed, the screws that attach the seat belt pre-tensioner to the seat belt…
Risk and remedy
Risk
If the seat belt pre-tensioner detaches from the seat belt assembly, the seat belt pre-tensioner will not perform as designed, increasing the risk of injury in a severe crash.
Remedy
Toyota will notify owners, and dealers will inspect the seat belt assemblies. Based on the inspection, the seat belt assembly will be replaced or new pre-tensioner screws will be installed with thread-locking sealant and a retractor spring cover with stopper ribs to prevent loosening of the screws. These services will be provided at no cost to the owner. The recall began during February 2014. Owners may contact Toyota at 1-800-331-4331.
Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013…
Risk and remedy
Risk
If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. This could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.
Remedy
Southeast Toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on March 21, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Toyota IS recalling certain model year 2005-2009 tacoma vehicles, manufactured from september 14, 2004, through august 29, 2008. over time, steering wheel vibration may damage the spiral cable assembly (clockspring) that powers the drivers air bag module. if damage occurs, the air bag warning lamp will illuminate and the air bag may become deactivated.
Risk and remedy
Risk
In the event of a crash, the drivers side air bag may not deploy, increasing the risk of personal injury.
Remedy
Toyota will notify owners, and dealers will replace the spiral cable assembly, free of charge. an interim letter IS expected to be mailed to owners during april 2012. owners may contact toyota at 1-800-331-4331.
Toyota IS recalling certain model year 2008 through 2011 FJ cruiser, land cruiser, tacoma, sequoia and tundra vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 138, "tire pressure monitoring system (TPMS)." when factory-installed wheels and tires were replaced with toyota authorized accessory wheels and LT…
Risk and remedy
Risk
Failure to warn of tire deflations IS a non-compliance with fmvss 138 and could lead to tire failure increasing the risk of a crash.
Remedy
For the land cruiser, sequoia, tacoma and tundra vehicles, the dealer will re-calibrate the tire pressure monitoring system on affected vehicles and install an updated tire and loading information label at no charge. for the FJ cruiser vehicles, the TPMS cannot be reset so the electronic control unit (ecu) for the TPMS will be replaced. toyota IS currently developing the remedy ecu. if an owner IS not certain whether his or her vehicle IS equipped with these accessories, please contact any toyota dealer for an inspection at no charge. the safety recall began on march 31, 2011. owners may contact toyota at 1-800-331-4331.
Gulf states toyota IS recalling certain model year 2005-2010 vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold between september 1, 2005 and june 2, 2008 without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
This does not meet the standard requirements.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. Dealers will also correct the owner's manual. the safety recall began on may 27, 2010. owners may contact gulf states toyota at 713-580-3300.
Southeast toyota IS recalling certain model year 2005-2011 passenger vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
A driver may overload a vehicle which may increase the risk of a crash.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. the safety recall began on may 27, 2010. owners may contact southeast toyota at 1-800-301-6859.
Toyota IS recalling certain model year 2004-2010 passenger vehicles. the accelerator pedal can get stuck in the wide open position due to its being trapped by an unsecured or incompatible driver's floor mat.
Risk and remedy
Risk
A stuck open accelerator pedal may result in very high vehicle speeds and make it difficult to stop the vehicle, which could cause a crash, serious injury or death.
Remedy
Toyota filed an amended defect report on november 25, 2009, stating that dealers will modify the accelerator pedal and, on certain vehicles, alter the shape of the floor surface under the pedal. these changes address the risk of pedal entrapment due to interference with the floor mat. redesigned accelerator pedals will become available beginning in april 2010 and dealers will replace any modified pedal with the new pedal if desired. also, dealers will replace any genuine toyota or lexus all-weather floor mats with redesigned all-weather mats, or repurchase the previous mats from owners who do not want the new ones. additionally, software modifications will be installed on camry, avalon and lexus ES 350, IS 350 and IS 250 models that will ensure that the brake overrides the accelerator in the event both brake and accelerator pedals are applied. toyota will begin mailing letters to owners on december 31, 2009. owners may contact toyota at 1-800-331-4331, lexus at 1-800-255-3987.
Toyota IS recalling 27,080 model year 2005 through 2010 passenger cars built from september 1, 2005 to may 4, 2009. these vehicles were not equipped with load carrying capacity modification labels which fails to conform with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims."
Risk and remedy
Risk
Incorrect load carrying capacity modification labels could result in the vehicle being overloaded, increasing the risk of a crash.
Remedy
Toyota will notify owners and provide them with a new, accurate label to be installed over the inaccurate label free of charge. the safety recall began on august 18, 2009. owners may contact toyota at 1-888-270-9371.
Owner complaints
520 complaints25 involved a crash18 involved a fire2 injuries
What owners report most
Latest complaints
- Structure › Frame and members
The contact's cousin owns a 2009 Toyota Tacoma. Upon inspection underneath the vehicle, the contact discovered severe frame corrosion on the passenger’s side that could eventually cause the subframe to fracture. The contact stated that an unknown dealer had inspected the subframe in 2018 under…
The contact's cousin owns a 2009 Toyota Tacoma. Upon inspection underneath the vehicle, the contact discovered severe frame corrosion on the passenger’s side that could eventually cause the subframe to fracture. The contact stated that an unknown dealer had inspected the subframe in 2018 under recall, and the vehicle passed the inspection. The dealer was notified of the failure and referred the contact to the manufacturer for assistance. The manufacturer was notified of the failure by phone. The failure mileage was approximately 140,000.
- Unknown or other
My truck has experienced a major coolant leak, but it's not the radiator nor the water pump. After replacing both the radiator and water pump, the leak remains. Upon further investigation, the hose connecting to the coolant bypass housing has come completely disconnected from the housing and the…
My truck has experienced a major coolant leak, but it's not the radiator nor the water pump. After replacing both the radiator and water pump, the leak remains. Upon further investigation, the hose connecting to the coolant bypass housing has come completely disconnected from the housing and the male connector, which is part of the housing is completely gone. After further research, I've come across numerous posts on multiple forums of other people experiencing the same issue with the same hose disconnecting and the same part of the coolant bypass housing completely gone. Had I not caught this problem while in my driveway, the truck would have leaked all the coolant and caused major issues possibly resulting in an accident on the road.
- Structure › Frame and members
The contact owns a 2009 Toyota Tacoma. The contact stated that the frame on the driver’s and passenger’s side was severely rusted. The dealer was contacted about the failure and about the warranty enhancement program ZH6, which was associated with the failure. The manufacturer had extended the…
The contact owns a 2009 Toyota Tacoma. The contact stated that the frame on the driver’s and passenger’s side was severely rusted. The dealer was contacted about the failure and about the warranty enhancement program ZH6, which was associated with the failure. The manufacturer had extended the warranty coverage for frame corrosion on certain 2005–2010 model year Toyota Tacoma vehicles. The dealer informed the contact that the program had expired. The manufacturer was made aware of the failure. The manufacturer informed the contact that the warranty program had expired. The failure mileage was approximately 217,000.
- Steering
Unknown.no accident ,Steering is tight. Started noticing it May 12 2026.
- Structure › Body
Real bumper assembly rotted off the frame was dragging behind the truck I'm at 60mph luckily nobody was behind me pulled over and removed it all both frame rails was rusted in half Hanging On by a little piece every place I called will not fix it want me to buy a whole frame truck has 220 miles on it with no rear bumper
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2009 Toyota Tacoma. The contact discovered a mileage discrepancy after the purchase. The vehicle was a private sale. At the time of purchase, the vehicle mileage was 127,619. It was later discovered through Carfax in August 2025 that the mileage on the Title was 297,651.
- Structure › Frame and members
The contact owns a 2009 Toyota Tacoma. The contact stated that after maintenance service on the vehicle, it was discovered that the front subframe of the vehicle was severely corroded. The vehicle was taken to an independent mechanic, where it was inspected, and determined that the entire subframe…
The contact owns a 2009 Toyota Tacoma. The contact stated that after maintenance service on the vehicle, it was discovered that the front subframe of the vehicle was severely corroded. The vehicle was taken to an independent mechanic, where it was inspected, and determined that the entire subframe had failed and needed to be replaced. The vehicle was not repaired. The vehicle was then taken to the dealer, where the same diagnostic result was provide,d and the contact was informed that the entire subframe needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure. The approximate failure mileage was 85,000.
- Structure
The contact owns a 2009 Toyota Tacoma. The contact stated that upon further inspection, the contact became aware that the chassis was rusted. The local dealer was contacted; however, the contact was informed that an unknown Toyota recall for warranty coverage had expired. The manufacturer was made aware of the failure. The failure mileage was approximately 110,000.
- Structure › Body
The frame has rusted and holes are unsafe. I am worried about driving my vehicle. the safety of me and other drivers on the road I am traveling are at risk. I went to liberty toyota in burlington, nj and they refused to repair. the rust IS unusual and there have been other years affected and frames replaced. my wife purchased this truck from liberty toyota
- Structure › Body · Unknown or other
Vehicle: 2009 Toyota Tacoma VIN: [XXX] Mileage: 128,400 Owner: Jacob Grove, Anderson, SC Summary of Issue: The frame of this 2009 Toyota Tacoma has developed severe rust perforation that makes the vehicle unsafe to drive. My independent mechanic has refused to work on it due to safety concerns…
Vehicle: 2009 Toyota Tacoma VIN: [XXX] Mileage: 128,400 Owner: Jacob Grove, Anderson, SC Summary of Issue: The frame of this 2009 Toyota Tacoma has developed severe rust perforation that makes the vehicle unsafe to drive. My independent mechanic has refused to work on it due to safety concerns, and Toyota of Greenville (SC) has confirmed that the frame is extensively corroded and requires replacement. Background: Toyota previously issued a Customer Support Program (CSP) for frame corrosion affecting 2005–2009 Tacomas in northern states, including Ohio, where this truck was purchased and operated. In June 2018, the vehicle was inspected at Don Wood Toyota in Athens, OH (91,600 miles). The dealership recorded “no perforation” and did not apply the protective coating or replace the frame. The truck has been minimally driven since (an average of 6,000 miles per year). In May 2024, at 128,400 miles, a mechanic and dealership confirmed the frame has multiple areas of severe perforation, including around brake lines and exhaust mounts. Concern: It is unreasonable that a vehicle frame could go from “no perforation” to “severe perforation” in only 36,000 miles and six years of light use. This indicates either: The 2018 inspection under Toyota’s CSP was inadequate, or The frame was already compromised but not properly addressed at the time. Safety Risk: The vehicle cannot be safely lifted, worked on, or driven in its current condition. The rapid deterioration presents a risk of frame failure while driving, endangering occupants and others on the road. Request: I am submitting this complaint so that NHTSA is aware of ongoing frame corrosion failures in 2005–2009 Toyota Tacomas, even in cases where Toyota previously inspected and declined to repair during the CSP period. This case demonstrates that the problem may not have been properly identified or corrected during program inspections, leaving unsafe vehicles on the road. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Structure › Frame and members
The contact owns a 2009 Toyota Tacoma. The contact stated that while driving at an undisclosed speed, there was an abnormal sound coming from underneath the vehicle. Upon inspection, the contact discovered a branch lodged beneath the vehicle and the corroded subframe with a hole in the front…
The contact owns a 2009 Toyota Tacoma. The contact stated that while driving at an undisclosed speed, there was an abnormal sound coming from underneath the vehicle. Upon inspection, the contact discovered a branch lodged beneath the vehicle and the corroded subframe with a hole in the front passenger’s side subframe. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was made aware of the failure. The failure mileage was approximately 113,000.
- Service brakes
Brake failure because of rusted brake lines.
- Service brakes
Brake failure resulting from rusted brake lines. Vehicle has not been inspected by manufacturer police or any other entity. No warning lamps or other indicators that detected brake failure.
- Structure › Body
I just learned from my Mechanic that the Frame Corrosion is bad. The frame was inspected by Vanderstyne (now West Herr) Toyota on 06/20/2020. It passed the Inspection at that time, so they did not do anything. But within 4.5 years and only a little more than 6,000 miles driving since then - this…
I just learned from my Mechanic that the Frame Corrosion is bad. The frame was inspected by Vanderstyne (now West Herr) Toyota on 06/20/2020. It passed the Inspection at that time, so they did not do anything. But within 4.5 years and only a little more than 6,000 miles driving since then - this corrosion shows up. I think the Toyota Specs for the Corrosion Inspection were not sufficient. Toyota should be held accountable for their negligence. I only have 72,900 miles on this Tacoma. I would have liked to keep it for another 5 years or so, but now I cannot and Toyota washed their hand when I contacted them.
- Structure › Frame and members
See Attached Letter
- Structure › Body
My frame is rusting and has holes in places. Is there a recall for that?
- Structure › Body
Chassis in the middle frame back left too much rust and big hole due to rust
- Structure
See attached document for complaint
- Exterior lighting
Headlight shows visible signs of over heating of the amber lenses on both driver and passenger side. Amber lenses are melted, obscured, burned through and causing additional discoloration to the clear lens of the headlight itself. This creates a safety issue for both driver and passenger side…
Headlight shows visible signs of over heating of the amber lenses on both driver and passenger side. Amber lenses are melted, obscured, burned through and causing additional discoloration to the clear lens of the headlight itself. This creates a safety issue for both driver and passenger side headlights and amber lights not illuminating properly but also reducing the reliability and longevity of the lighting systems themselves.
- Structure › Body
We recently went to have new tires put on the Tacoma at Costco. The Costco technician said that the frame was rusted and he had a similar problem with his Tacoma and Toyota repaired it. He told us that he couldn't install the new tires with the rusted frame and suggested that we go to our Toyota…
We recently went to have new tires put on the Tacoma at Costco. The Costco technician said that the frame was rusted and he had a similar problem with his Tacoma and Toyota repaired it. He told us that he couldn't install the new tires with the rusted frame and suggested that we go to our Toyota Dealer. We went to Toyota Direct in Columbus, Ohio (where we have had the vehicle serviced every time) and they took pictures of the rust and told us they would call us back. Although we have inquired several times, they had not called us back so we reached out to Toyota Corporate and they said that the recall/warranty extension had expired and there was nothing they could do. Costco has refused to install the new tires until the frame is repaired. (our problem is not with Costco.) The Costco tech did tell us that he was surprised that the rust had not been noticed before by the Dealer during regular service as it would not have appeared so quickly. So the complaint goes against Toyota Corporate and Toyota Direct... why did they not notice any rust while the warranty/recall was in effect or any of the service visits if this is a standard problem with 2009 Toyotas. If the vehicle has a rusted frame, that could be dangerous to whoever is driving the vehicle. In addition, without being able to have new tires installed due to the frame issue, that creates another safety concern with winter weather approaching and tires that need replaced.
- Suspension
Frame is rusted out under engine above axle housing.
- Structure › Body
Just learned from CT Toyota dealer that my 2009 Toyota Tacoma frame has significant corrosion and that it's time to replace frame or vehicle. Very disappointed. Vehicle did go in for recall service on 12/7/17 and CRC spray was applied as frame was determined ok at that time. Looks like that…
Just learned from CT Toyota dealer that my 2009 Toyota Tacoma frame has significant corrosion and that it's time to replace frame or vehicle. Very disappointed. Vehicle did go in for recall service on 12/7/17 and CRC spray was applied as frame was determined ok at that time. Looks like that didn't help much to prevent further corrosion less than 6 years later. Voicing my frustration over those that got new frames are still driving on road, while I have to retire my truck. Extending warranty to 12 years from date of first use clearly did me no help. Do I and others like this have any options?
- Unknown or other
Frame rotten from salt corrosion. Rust holes in frame.
- Structure › Body
Rust flaking frame small hole
- Suspension
I have a 2009 Toyota Tacoma that has a significant amount of frame rust. I have recently learned that Toyota lost a class action lawsuit on this model of Tacoma because the frames would rot quickly. I was not aware of this recall, nor was I notified and because of that I missed the 12-year windows…
I have a 2009 Toyota Tacoma that has a significant amount of frame rust. I have recently learned that Toyota lost a class action lawsuit on this model of Tacoma because the frames would rot quickly. I was not aware of this recall, nor was I notified and because of that I missed the 12-year windows for Toyota to replace the frame. Toyota's Owner app made no mention of this either. The only recall that I received was an issue with leaf springs which I had corrected when the parts came in. I'd like to know what I can do to have my truck's frame replaced, or something comparable.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10244108TSB: Some 2005 ? 2023 model year Tacoma vehicles equipped with a manual transmission may exhibit a squeak or creak noise from the clutch pedal when it is depressed or released.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10210376OBSOLETE NOTICE Month 09, 2022: This bulletin is now obsolete. Please see T-SB-0014-22.
- 10210375TSB: This Service Bulletin includes procedures to replace damaged or loose front carpet floor retainer(s) without replacing the carpet assembly. Follow the Repair Procedure in this bulletin to replace the loose or damaged carpet floor retainer(s).
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10204571TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10203532TT: Some customers may encounter Bluetooth connectivity concerns such as: ?Difficulty to pair the phone. ?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
- 10197494Technician Certification Requirements.
- 10197493Updated dealer letter
- 10197490Warranty enhancement program (ZH6): warranty extension for frame corrosion on certain 2005-2010 my tacoma vehicles
- 10197489Brake line color codes.
- 10197488There is a drivetrain vibration and/or noise.
- 10197476Replacement vin plates.
- 10197473Product general information.
Every Toyota Tacoma model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.