2021 Toyota Tacoma

Owner complaints

What owners report most

1. Power train14
2. Service brakes12
3. Unknown or other12
4. Engine12
5. Forward collision avoidance9
6. Electrical system9
7. Air bags7
8. Fuel/propulsion system6
9. Structure6
10. Vehicle speed control5

Latest complaints

• Oct 9, 2026NY
  Engine

  Engine developed a loud knock while under normal driving conditions at 61,000 miles. Oil was changed every 5k miles since new. Dealer says my oil rings on piston skirt have failed and heavy scoring on cylinder #5 Replaced short block under my aftermarket warranty. Toyota refused to cover it because I was 1k miles over factory warranty

• Sep 8, 2026LA
  Power train

  Driving in town 30 to 40mph, (while in drive) the vehicle rev’d up like it was in neutral then went back to normal. That is concerning because it will cause transmission problems & pulling onto a road the truck could shift to (neutral) causing it to not go.

• Aug 29, 2026FL
  Structure › Body

  The cabin air pressure vents behind the back seat are leaking letting water into the vehicle. The seals have dried up. It's causing a moldy smell in the vehicle.

• Aug 8, 2026CA
  Engine · Forward collision avoidance › Warnings
  Having two issues major issues that’s causing me a $10,000 bill. The timing cover is leaking and there is a coolant bypass hose that is leaking. I have spend a lot of maintenance on this truck on maintaining it to have to remove the engine. As for the forward collision warning ive had it go off…

  Having two issues major issues that’s causing me a $10,000 bill. The timing cover is leaking and there is a coolant bypass hose that is leaking. I have spend a lot of maintenance on this truck on maintaining it to have to remove the engine. As for the forward collision warning ive had it go off multiple times witout a vehicle there. While in cruise control ive had it unexpectedly break on me when there was no visible vehicle infront or next to me.

• Jul 13, 2026TX
  Service brakes

  Brake master cylinder is leaking in the interior of truck on driver side floor mat. Oil is come from brake master cylinder seal.

• Jun 26, 2026KY
  Electrical system
  The Multi-Information Display (MID) on the instrument cluster (combination meter) has failed completely. The display shows full-width horizontal RGB scan lines across the entire screen with no readable information. The analog gauges (speedometer and tachometer) remain functional but all digital…

  The Multi-Information Display (MID) on the instrument cluster (combination meter) has failed completely. The display shows full-width horizontal RGB scan lines across the entire screen with no readable information. The analog gauges (speedometer and tachometer) remain functional but all digital display information is unavailable including speed, warnings, fuel economy data, and safety system status indicators. This failure occurred suddenly with no prior warning. Vehicle has approximately 50,000 miles. I am aware that Toyota issued Safety Recall 25V595 in September 2025 covering the identical combination meter failure on 2023-2025 model year Tacomas and other Toyota vehicles. The root cause identified in that recall — accelerated deterioration of the memory device inside the combination meter due to improper programming — appears to be the same failure mechanism present in my 2021 model year vehicle. I am filing this complaint to formally document that this known defect extends to 2021 model year Tacoma vehicles and to request that NHTSA investigate expanding recall 25V595 to include earlier model years. Toyota should be required to repair or replace the combination meter on affected 2021 vehicles at no cost to owners, consistent with the remedy already established for 2023-2025 vehicles. A Toyota case has been opened with the Brand Engagement Center at [XXX]. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

• Jun 25, 2026NY
  Electrical system

  Digital instrument panel speedometer screen has gone blank. No longer displays speed. This occurred while driving the vehicle.

• Jun 10, 2026VT
  Back over prevention › Rearview system braking · Back over prevention › Warnings · Lane departure › Blind spot detection

  About a month ago the Blind spot monitoring system failed, dealer said $2500.00 to repair, about 10 days ago, backup sonar parking system failed, dealer cost to repair $2200.00

• May 26, 2026CA
  Engine

  The plastic coolant crossover valve or pipe failed at 66,000 miles and 5 years of usage. This led to the radiator cracking. After researching online, I read about thousands of Tacoma 3rd generation users with the same issue. Also, the same issue was recalled for several other models of Toyotas but not the Tacoma.

• Apr 23, 2026FL
  Fuel/propulsion system
  After I purchased my 2021 Toyota Tacoma TRD Sport with 4 miles on it and at 1,332 miles on 11/26/21, the Check Engine light with Traction Control Off light came on while I was driving. I immediately pulled over and on the truck media screen it read this: "A malfunction in the electronic control of…

  After I purchased my 2021 Toyota Tacoma TRD Sport with 4 miles on it and at 1,332 miles on 11/26/21, the Check Engine light with Traction Control Off light came on while I was driving. I immediately pulled over and on the truck media screen it read this: "A malfunction in the electronic control of the engine, throttle or automatic transmission has been detected. Contact your Toyota dealer and have your vehicle inspected." The truck was rough idling and had no acceleration. I had the truck towed to dealership where it was purchased and upon diagnostic, it was determined that #3-cylinder injector was reading "Open Circuit" with code P020313. Being under warranty the dealership repaired the bad injector. No further issues until 4/22/26. On 4/22/26 with mileage at 48,361, I started my truck in my driveway and immediately recognized that the truck was rough idling and the Check Engine Light along with the Traction Control Light Off being on. The exact same message displayed on the screen as above, "A malfunction in the electronic control of the engine, throttle or automatic transmission has been detected. Contact your Toyota dealer and have your vehicle inspected.". The truck was towed back to the same dealership and upon diagnostic the same issue of #3-cylinder injector "open circuit" with code P020313 was revealed. It was recommended to replace the bad #3-cylinder injector and also recommended to go ahead and replace all of the spark plugs. The total repair bill we be ~$2600 when I go to pick it up in 3 days. This is not just a coincidence that the exact same #3-cylinder injector has gone bad at 1,332 miles and then again at 48,361 miles. Seems to be a connection between the injector going bad and the issues that they have had with the High Pressure Fuel Pumps. Toyota needs to acknowledge this problem.

• Mar 9, 2026GA
  Service brakes

  when I push the brake pedal, it goes to the floor. I have had the brakes and master cylinder replaced. after about one month the brakes started failing again. I am going to take it back to the mechanic to have them re-evaluate the brakes. No kind of official has inspected my truck. I have been having braking issues for about a year.

• Feb 26, 2026VT
  Lane departure › Blind spot detection · Power train · Steering

  There are three concerns in this write up: at 117000 miles the blind spot monitoring system has fails and will cost $300 to repair. More concerning is that it was recommended I replace the Power Steering Lines at a cost of $927 and the Transmission Lines at a cost of $797 due to severe rusting and corrosion. Its recommended before they rust through and break/leak.

• Feb 5, 2026SC
  Forward collision avoidance › Automatic emergency braking

  Front radar recall- no back cover and goes defective

• Dec 30, 2025CO1 injury
  Air bags

  Vehicle was in car accident where airbags did not deploy.

• Dec 30, 2025CO
  Electrical system

  When vehicle is driven at 85 mph (cruise control set) speedometer jolts. Speed must be reduced to 84 to resolve issue.

• Dec 15, 2025NJ75,000 mi
  Fuel system, gasoline
  The contact owns a 2021 Toyota Tacoma. The contact stated that while her husband was driving at highway speeds, the vehicle stalled with the engine oil warning light flashing on the instrument panel. The contact stated that her husband detected a fuel odor coming from the vehicle after the failure.…

  The contact owns a 2021 Toyota Tacoma. The contact stated that while her husband was driving at highway speeds, the vehicle stalled with the engine oil warning light flashing on the instrument panel. The contact stated that her husband detected a fuel odor coming from the vehicle after the failure. The driver was able to restart the vehicle and drove the vehicle to the dealer. While at the dealer the vehicle was test driven and the failure was acknowledged. The vehicle was then diagnosed with a defective fuel pump. The vehicle was repaired but remained with the dealer. The manufacturer was not notified of the failure. The failure mileage was approximately 75,000.

• Nov 28, 2025WA
  Electrical system

  Heated seat stopped working after smelling a slight burning smell. I investigate and found discolored and burnt electrical connections on the heated seat wires. This happened on the driver's seat. I'm worried the same thing could happen on the passenger side.

• Nov 20, 2025NY
  Service brakes

  truck is under 20 thousand miles right front brake shoes are loose and not in place. the whole brake assembly is completely rusted .brake lines are leaking.

• Nov 18, 2025TX62,000 mi
  Fuel system, gasoline
  The contact owns a 2021 Toyota Tacoma. The contact stated that the vehicle experienced extended cranking on cold start. There was no warning light illuminated. The dealer was contacted and informed the contact that the vehicle was not covered under Toyota Campaign Number: 23TE01(High-Pressure Fuel…

  The contact owns a 2021 Toyota Tacoma. The contact stated that the vehicle experienced extended cranking on cold start. There was no warning light illuminated. The dealer was contacted and informed the contact that the vehicle was not covered under Toyota Campaign Number: 23TE01(High-Pressure Fuel Pump – Low Pressure Fuel Seepage). The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure and informed the contact that the VIN was not included in a recall. The failure mileage was approximately 62,000.

• Nov 14, 2025SC47,000 mi
  Power train
  The contact owns a 2021 Toyota Tacoma. The contact stated that while driving 10 MPH, after depressing the accelerator pedal and then attempting to depress the brake pedal to make a left turn, the vehicle failed to respond as intended. An independent mechanic was contacted. The contact pulled over…

  The contact owns a 2021 Toyota Tacoma. The contact stated that while driving 10 MPH, after depressing the accelerator pedal and then attempting to depress the brake pedal to make a left turn, the vehicle failed to respond as intended. An independent mechanic was contacted. The contact pulled over into a church parking lot. No warning light was illuminated. The vehicle was taken to an independent mechanic to be diagnosed; however, the diagnostic result was unknown. The vehicle was not repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 47,000.

• Sep 30, 2025CA102,000 mi
  Electrical system › Starter assembly · Engine and engine cooling
  The contact owns a 2021 Toyota Tacoma. The contact stated that there was a coolant leak, and the coolant level in the reservoir was low. The coolant reservoir was topped off; however, the failure reoccurred. While having an oil change at Keys Toyota (5855 Van Nuys Blvd, Sherman Oaks, CA 91401); the…

  The contact owns a 2021 Toyota Tacoma. The contact stated that there was a coolant leak, and the coolant level in the reservoir was low. The coolant reservoir was topped off; however, the failure reoccurred. While having an oil change at Keys Toyota (5855 Van Nuys Blvd, Sherman Oaks, CA 91401); the contact was informed about the coolant leak in the rear of the engine. The contact stated that the vehicle failed to start. There were no warning lights illuminated. The contact called the local dealer, who confirmed there was no warranty coverage for the repair. The vehicle was diagnosed with a coolant leak, and the starter needed to be replaced. The manufacturer was contacted, but no assistance was provided. The failure mileage was approximately 102,000.

• Sep 22, 2025NJ
  Unknown or other

  AC compressor pressure release discharges gas. Dealer states new compressor needed. Vehicle is only 4 years old.

• Aug 16, 2025AZ
  Power train

  Transmission constantly seeking a gear usually 5th to 6th while using Cruize control. At times over-reving to near redline. End up having to manuall downshift to fourth back and fourt to drive. End up shifting more frequently that would if driving my mauual 6 speed transmission tacoma with the V6 as well.

• Apr 21, 2025VT24,000 mi
  Fuel system, gasoline
  The contact owns a 2021 Toyota Tacoma. The contact stated that upon starting the vehicle, the fuel pump was very noisy while having a routine oil change at an independent mechanic. There was an abnormal clacking sound detected. There were no warning lights illuminated. The contact stated that the…

  The contact owns a 2021 Toyota Tacoma. The contact stated that upon starting the vehicle, the fuel pump was very noisy while having a routine oil change at an independent mechanic. There was an abnormal clacking sound detected. There were no warning lights illuminated. The contact stated that the failure was related to NHTSA Campaign Number: 20V682000 (Fuel System, Gasoline). The vehicle was taken to the local dealer, where it was diagnosed and determined that sound was coming from the fuel pump. The dealer informed the contact that the sound was normal. The vehicle was not repaired. The manufacturer was not contacted. The failure mileage was approximately 24,000.

• Mar 19, 2025HI
  Unknown or other

  N/a

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11010353Some 2016 2022 model year Tacoma vehicles with Super White (040) paint may exhibit paint peeling along the exterior window door frames and/or inner fender edges under the hood. The affected panel(s) require repainting to address this condition. The paint repair may need to be sublet to a body shop.
• 11010328Technical instructions for customer support program 23te08 coverage for paint peeling on door frames + front inner fenders certain 2016-2022 model year tacoma
• 11010327Customer Support Program 23TE08 Paint Repair Process Updated 10.02.2024 Updated Parts quantity on two parts.
• 11010083Technical instructions for customer support program 23te08 coverage for paint peeling on door frames + front inner fenders certain 2016-2022 model year tacoma
• 11010082In our continuing efforts to ensure the best in customer satisfaction, Toyota is announcing a Customer Support Program to provide coverage for paint peeling on door frames and front inner fenders on certain 2016-2022 model year Tacoma vehicles. Toyota has received some reports of paint peeling along the exterior door window frames and front inner fenders under the hood on certain Tacoma vehicles with 040 Super White paint color. Although the vehicle paint is covered by Toyotas New Vehicle Limited Warranty for three years, or 36,000 miles (whichever comes first), we at Toyota care about the customers ownership experience. Toyota is providing coverage for repairs related to the condition described above.
• 11010081Customer Support Program 23TE08 Paint Repair Process
• 11010080Toyota has received some reports of paint peeling along the exterior door window frames and front inner fenders under the hood on certain Tacoma vehicles with 040 Super White paint color. Although the vehicle paint is covered by Toyotas New Vehicle Limited Warranty for three years, or 36,000 miles (whichever comes first), we at Toyota care about the customers ownership experience. Toyota is providing coverage for repairs related to the condition described above.
• 11010066Customer support program frequently asked questions
• 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
• 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
• 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
• 11005115Toyota plans to conduct Safety Recall and Service Campaign follow-up notifications to owners whose vehicles have not yet had the following Safety Recall and/or Service Campaign repairs completed
• 11005114Safety Recall and Service Campaign completion is an important part of our commitment to customer satisfaction of Toyota products. Toyota will be conducting follow-up notifications to remind owners whose vehicles have not yet had Safety Recall and/or Service Campaign repairs completed in the campaigns listed
• 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
• 11005057Toyota plans to conduct Safety Recall and Service Campaign follow-up notifications to owners whose vehicles have not yet had the following Safety Recall and/or Service Campaign repairs completed
• 11005056Safety Recall and Service Campaign completion is an important part of our commitment to customer satisfaction of Toyota products. Toyota will be conducting follow-up notifications to remind owners whose vehicles have not yet had Safety Recall and/or Service Campaign repairs completed in the campaigns listed
• 11003654Phone call sound quality may be adjusted to fit the Tacoma owners preferences.
• 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11003619Customers have expressed concerns about the performance of Qi Wireless Chargers. Wireless chargers on applicable vehicles are designed to work with Qi Certified devices only. MagSafe devices, that are not Qi Certified, may not charge as expected with Qi Wireless Chargers.
• 11003599Phone call sound quality may be adjusted to fit the Tacoma owners preferences.
• 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11003564Customers have expressed concerns about the performance of Qi Wireless Chargers. Wireless chargers on applicable vehicles are designed to work with Qi Certified devices only. MagSafe devices, that are not Qi Certified, may not charge as expected with Qi Wireless Chargers.
• 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
• 10252259TSB: Some 2018 ? 2022 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update, however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the expiration date of the dynamic subscription (stored in the head unit), must be checked. If the expiration date has not passed, a license key may be generated without the purchase of an Activation Card Number (ACN). Updating the map without the use of an ACN is considered an Embedded Navigation Update (refer to pg. 10) and performing this update does not extend the subscription to dynamic map services. If the subscription period has expired, or is expiring within the next 90 days, it should be recommended to the customer to purchase an ACN. Utilizing an ACN, will initiate the Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the embedded navigation update and provide dynamic map services for a period of two years from the date that the Dynamic Navigation Update is performed. ACNs are provided in a pamphlet available through the normal parts ordering system. Follow the process in this bulletin to perform the update.
• 10251759Ti: 21td02 expired on september 23, 2023 technical instructions for limited service campaign 21td02 additional remote keyless entry key certain 2021 model year tacoma vehicles
• 10251758DP: 21TD02 Expired on September 23, 2023 Due to an unexpected supplier issue, only one (1) Remote Keyless Entry key was included with the subject vehicles when they were delivered to customers. These customers were advised at the time that Toyota would contact them at a later date to arrange for an additional Remote Keyless Entry key to be provided.

Every Toyota Tacoma model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.