2005 Toyota Tacoma
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Tacoma › 2005
These records cover every 2005 Toyota Tacoma. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
10 recalls name the 2005 Toyota Tacoma. Newest first.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2005-2011 Toyota Tacoma Pre-Runner and 4x4 vehicles manufactured September 14, 2009, to October 11, 2010. In the affected vehicles, one of the leaf springs may fracture due to stress or corrosion. While being driven, the broken leaf could move out of position and contact…
Risk and remedy
Risk
If the fuel tank leaks fuel from being punctured, there is an increased risk of a fire.
Remedy
Toyota will notify owners and dealers will install new rear leaf spring assemblies. The recall began on January 29, 2016. Owners may contact Toyota customer service at 1-800-331-4331.
Toyota is recalling certain model year 2005-2010 Tacoma Access Cab vehicles manufactured September 14, 2004, through March 29, 2010; and model year 2011 Tacoma Access Cab vehicles manufactured July 1, 2010, through September 7, 2011. If the access doors are repeatedly and forcefully closed, the screws that attach the seat belt pre-tensioner to the seat belt…
Risk and remedy
Risk
If the seat belt pre-tensioner detaches from the seat belt assembly, the seat belt pre-tensioner will not perform as designed, increasing the risk of injury in a severe crash.
Remedy
Toyota will notify owners, and dealers will inspect the seat belt assemblies. Based on the inspection, the seat belt assembly will be replaced or new pre-tensioner screws will be installed with thread-locking sealant and a retractor spring cover with stopper ribs to prevent loosening of the screws. These services will be provided at no cost to the owner. The recall began during February 2014. Owners may contact Toyota at 1-800-331-4331.
Toyota IS recalling certain model year 2005-2009 tacoma vehicles, manufactured from september 14, 2004, through august 29, 2008. over time, steering wheel vibration may damage the spiral cable assembly (clockspring) that powers the drivers air bag module. if damage occurs, the air bag warning lamp will illuminate and the air bag may become deactivated.
Risk and remedy
Risk
In the event of a crash, the drivers side air bag may not deploy, increasing the risk of personal injury.
Remedy
Toyota will notify owners, and dealers will replace the spiral cable assembly, free of charge. an interim letter IS expected to be mailed to owners during april 2012. owners may contact toyota at 1-800-331-4331.
Gulf states toyota IS recalling certain model year 2005-2010 vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold between september 1, 2005 and june 2, 2008 without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
This does not meet the standard requirements.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. Dealers will also correct the owner's manual. the safety recall began on may 27, 2010. owners may contact gulf states toyota at 713-580-3300.
Southeast toyota IS recalling certain model year 2005-2011 passenger vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
A driver may overload a vehicle which may increase the risk of a crash.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. the safety recall began on may 27, 2010. owners may contact southeast toyota at 1-800-301-6859.
Toyota IS recalling certain model year 2004-2010 passenger vehicles. the accelerator pedal can get stuck in the wide open position due to its being trapped by an unsecured or incompatible driver's floor mat.
Risk and remedy
Risk
A stuck open accelerator pedal may result in very high vehicle speeds and make it difficult to stop the vehicle, which could cause a crash, serious injury or death.
Remedy
Toyota filed an amended defect report on november 25, 2009, stating that dealers will modify the accelerator pedal and, on certain vehicles, alter the shape of the floor surface under the pedal. these changes address the risk of pedal entrapment due to interference with the floor mat. redesigned accelerator pedals will become available beginning in april 2010 and dealers will replace any modified pedal with the new pedal if desired. also, dealers will replace any genuine toyota or lexus all-weather floor mats with redesigned all-weather mats, or repurchase the previous mats from owners who do not want the new ones. additionally, software modifications will be installed on camry, avalon and lexus ES 350, IS 350 and IS 250 models that will ensure that the brake overrides the accelerator in the event both brake and accelerator pedals are applied. toyota will begin mailing letters to owners on december 31, 2009. owners may contact toyota at 1-800-331-4331, lexus at 1-800-255-3987.
Toyota IS recalling 27,080 model year 2005 through 2010 passenger cars built from september 1, 2005 to may 4, 2009. these vehicles were not equipped with load carrying capacity modification labels which fails to conform with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims."
Risk and remedy
Risk
Incorrect load carrying capacity modification labels could result in the vehicle being overloaded, increasing the risk of a crash.
Remedy
Toyota will notify owners and provide them with a new, accurate label to be installed over the inaccurate label free of charge. the safety recall began on august 18, 2009. owners may contact toyota at 1-888-270-9371.
On certain vehicles, due to improper assembly of the air bag inflator, which IS used in the side air bag, the curtain shield air bag, and the knee air bag assembly, some inflators were produced with an insufficient amount of the heating agents necessary for proper air bag deployment. in this condition, the expansion force of the gas may be insufficient to…
Risk and remedy
Risk
This may increase the risk of injury to the occupant in the involved seating position in the event of a crash.
Remedy
Dealers will replace the specific srs air bag. the recall began on april 6, 2006. owners may contact toyota at 1-888-270-9371, scion at 1-866-548-1851, or lexus at 1-800-255-3987.
On certain regular cab pickup trucks equipped with a bench seat, the seat position and seat belt buckle sensor connector pins are incorrectly positioned due to a wire harness manufacturing process error.
Risk and remedy
Risk
In this condition, the seat position and seat belt buckle sensor may not function as designed, affecting the adaptive air bag deployment, which if the vehicle IS involved in a crash, could result in improper occupant restraint.
Remedy
Dealers will inspect the seat position and seat belt fastening condition sensor connector. an additional sub-wire harness will be installed to correct the connector pin manufacturing error, if necessary. the recall began on july 25, 2005. owners may contact toyota at 1-800-431-4331.
On certain pickup trucks equipped with an automatic transmission, there IS a possibility that the parking brake pedal cable lock nut may not have been tightened to the proper torque specification. in this condition, the lock nut may loosen and come off, which will reduce the effectiveness of the parking brake.
Risk and remedy
Risk
This condition could allow the vehicle to roll if the transmission IS not placed into the "park" position and the vehicle IS parked on a slope, thus raising the possibility of a crash.
Remedy
Dealers will inspect and tighten the parking brake pedal cable lock nut to the proper torque specification free of charge. the recall began on march 3, 2005. owners may contact toyota at 1-800-331-4331.
Owner complaints
707 complaints47 involved a crash4 involved a fire16 injuries
What owners report most
Latest complaints
- Structure › Body
I discovered frame perforation rust, for which Toyota sent letters offering to repair or compensate. I have moved to Florida and the letters didn't forward. So I notified Toyota and they said they would not do anything to help. There was a prior class-action lawsuit about this, which prompted…
I discovered frame perforation rust, for which Toyota sent letters offering to repair or compensate. I have moved to Florida and the letters didn't forward. So I notified Toyota and they said they would not do anything to help. There was a prior class-action lawsuit about this, which prompted Toyota's action. I have sent Toyota mechanic statements and photos of the rust along with m y nice letter requesting help. They offered that I could get my vehicle inspected at a Toyota dealer, at my expense, which would auto-enter it into their warranty database, repair order # [XXX] which I did this week. I am writing them back again, appealing for their help. In the interim, I am making this report. I will also be notifying the Florida Attorney General's Consumer Protection Division. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Structure › Body
The frame had rust a lot,had one spot was repaired,still have some need fix
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2005 Toyota Tacoma. The contact discovered a mileage discrepancy after the purchase. The vehicle was a private sale through OfferUp. At the time of purchase, the vehicle mileage was 139,900. It was later discovered that the mileage on the Title was 339,740.
- Structure › Body
Corrocion en el chasis, el motor se encuentra inclinado
- Suspension
The frame is rusting out substantially. The dealer advised me not to drive because the frame could fail at anytime. I have been driving around unaware of the problem. I could have been killed if the framed failed on the highway. There was no warning light. The Vehicle has been into the dealer…
The frame is rusting out substantially. The dealer advised me not to drive because the frame could fail at anytime. I have been driving around unaware of the problem. I could have been killed if the framed failed on the highway. There was no warning light. The Vehicle has been into the dealer and no one mentioned the problem until 08/30/2024. The Vehicle has been maintained and garaged. The vehicle is in good condition and has not been in an accident. I called Toyota and was told I was out of luck because the warranty expired even though the frame problem was Toyotas fault. A truck frame should outlast the engine and the body. I plan to keep the truck for 400,00 miles and my finances are very tight. Toyota is penalizing me because the frame didn't rust out sooner and on Toyotas time frame.
- Structure › Body
The frame has failed and is well beyond unsafe for the road due to the amount of rust and decay. The vehicle was part of the 'Corrosion Resistance Compound Application to Vehicle Frame' recall. I will bring the vehicle for inspection ASAP, if requested. There is absolutely nothing safe when a…
The frame has failed and is well beyond unsafe for the road due to the amount of rust and decay. The vehicle was part of the 'Corrosion Resistance Compound Application to Vehicle Frame' recall. I will bring the vehicle for inspection ASAP, if requested. There is absolutely nothing safe when a vehicle has a faulty structural issue. When I purchased the vehicle there were step rails and spray painted portions of the frame, the parts you could see. Also, when looking up the vehicle, I didn't see any recall issues at that time and thought it was a good sign. After driving it for 6th months, I started feeling a slight resistance feel when accelerating and turning at the same time. I took it to a mechanic and they delivered the news that the frame was deemed unfit for the roads. I found out that the vehicle was brought in for the recall when it came out and at that time the frame was labeled 'not exchangeable' and a slight bandage was applied to the unsafe defective body component that was sold as 'safe.' I filed a claim with a local dealership and they told me that it was still safe for roads. Right now, the frame clips and portions of the frame are visibly rusting off, visible from solely walking up to the truck. Reaching out to Toyota I am very much hoping that the care for their loyal customers equally matches the product that they produce, superior to the competition. I have owned a Toyota for 10 years and never considered purchasing anything else for life, however, coming to a fair solution on this issue will have a tremendous effect on that statement I know to be true, right now. This truck is in OUTSTANDING condition with VERY little rust to the actually black body of the vehicle and had ONLY 165,000 miles on it. Please don't allow this vehicle to be absent for the roads due to an issue that was already agreed that it needed correcting. Please allow myself to continue to feel that Toyota makes an outstanding product because they care about the customer.
- Structure › Frame and members
The contact owns a 2005 Toyota Tacoma. After a visual inspection of the exterior of the vehicle, the contact observed extreme corrosion on the sub frame. There was no warning light illuminated. The vehicle was taken to the dealer, who confirmed the corrosion of the sub frame and deemed the vehicle…
The contact owns a 2005 Toyota Tacoma. After a visual inspection of the exterior of the vehicle, the contact observed extreme corrosion on the sub frame. There was no warning light illuminated. The vehicle was taken to the dealer, who confirmed the corrosion of the sub frame and deemed the vehicle unsafe for driving. The vehicle was not repaired. The manufacturer was notified of the failure but provided no assistance. The failure mileage was 130,000.
- Structure › Body · Suspension
Frame failure due to rust. Suspension is detached with springs hitting frame. NOTE: fuel tank partially detached previously due to rusted brackets 3-4 years ago and all components were replaced. Filed NHTSA report at that time however had technical issues completing… Still have photos.
- Structure › Body
Where the motor mount sits the bracket below collapsed into the Frame itself causing the engine to lower
- Structure › Frame and members
The contact owns a 2005 Toyota Tacoma. The contact stated while changing the oil and inspecting the vehicle, there was rust on the driver's side frame. The dealer had not been contacted. The vehicle had not been repaired. The manufacturer was made aware of the failure and confirmed that a repair was no longer covered under warranty. The approximate failure mileage was 169,000.
- Back over prevention › Rearview system braking · Structure › Body · Wheels
Drivers the problem drunk speeding Hitman killed man do you watch hard no manslaughters still driving just got another traffic ticket and let go again super unfair
- Structure › Frame and members
The contact owns a 2005 Toyota Tacoma. The contact stated that while performing an oil change, he noticed excessive corrosion on the subframe of the vehicle. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was made aware of the failure; however, the manufacturer informed the contact that the vehicle was out of warranty. The failure mileage was approximately 250,000.
- Structure › Body
hello good afternoon my name is [XXX] I have a Toyota Tacoma 2005 could you help me with some information it has a chassis with holes and rotten. Toyota was changing all chassis that had this defect in 2018 to 2020 at no cost, the first owner didn't know about it and I wasn't even warned. I would…
hello good afternoon my name is [XXX] I have a Toyota Tacoma 2005 could you help me with some information it has a chassis with holes and rotten. Toyota was changing all chassis that had this defect in 2018 to 2020 at no cost, the first owner didn't know about it and I wasn't even warned. I would like to know if I am entitled to a free chassis exchange? INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
- Structure › Body · Unknown or other
Hi, I have a 2005 Toyota Tacoma, the chassis is rusty and has holes in it. I went to complain at Toyota, they said the car didn't have a Recall but neither the first owner nor I had news that I would have to change the car's frame. I would like help to resolve this. all parts under the car are very rusty
- Engine · Power train · Suspension
In May of 2018, I purchased a 2005 Toyota Tacoma. After arrival of new title, I received a safety recall notice from Toyota in regards to possible abnormal frame rust. I was instructed to take my Tacoma to nearest Toyota dealership for frame inspection. Prior to taking Tacoma in for frame…
In May of 2018, I purchased a 2005 Toyota Tacoma. After arrival of new title, I received a safety recall notice from Toyota in regards to possible abnormal frame rust. I was instructed to take my Tacoma to nearest Toyota dealership for frame inspection. Prior to taking Tacoma in for frame inspection, I scoped the frame myself, and noticed abnormal rust forming throughout both sides of the frame. Therefore, I took my Tacoma to Berge Toyota in Mesa AZ. for further inspection and to have some other repairs done. Upon my arrival to Berge Toyota, l informed the service writer of the repairs that were needed done and showed him the request from Toyota for the frame inspection. My vehicle was taken to a lift, where a brief frame inspection was performed with a flashlight only and I was told the frame was fine, and the rust I had witnessed during my personal inspection was within a standard tolerance of "normal". On September 12, 2022 my frame cracked in a horseshoe formation around the driver side motor mount, causing the engine to shift and sink approx. 3/4" towards the driver side. This frame failure has caused numerous problems to occur, such as the fan to continuously rub against the shroud, abnormal shifting of the transmission, ramping up and down of RPM's, vehicle's steering locks up and cannot be safely driven, leaving me without transportation After detailed inspection was performed on my Tacoma, the horseshoe crack around the motor mount was found and it was determined this was the source of all the problems. I contacted Berge Toyota where I was informed by their service manager that Berge Toyota was not certified to do the frame inspection or repair, and further explained the safety recall had expired and instructed me to contact Toyota to see what could be done. The question I had for the Berge Toyota service manager, was if they were not certified to do the frame inspection, or repair why did they inspect my frame and inform me it was fine, when it wasn't?
- Structure › Body
My 2005 Toyota Tacoma had a recall due to potential frame rusting. I brought my Truck to my local Toyota Dealership for the frame inspection as stated in the recall notice I received. The frame did not need to be replaced and at a later date the frame was sealed per Toyota's remedy. In March of…
My 2005 Toyota Tacoma had a recall due to potential frame rusting. I brought my Truck to my local Toyota Dealership for the frame inspection as stated in the recall notice I received. The frame did not need to be replaced and at a later date the frame was sealed per Toyota's remedy. In March of 2022 I had an issue with my truck that required the gas tank to be removed. As it turned out there was major rust to the frame that was located behind the gas tank that was never sealed during the original remedy to the frame rusting issue. I contacted Toyota about the issue and was told that the extended warranty for the Issue had expired. I was told to contact the local dealership. In conversation with the dealership I was told there was nothing they can do. I feel that if this issue has happened to my truck, there must be other trucks on the road with the same issue that the owners have no Idea what is happening to their frames that may cause a safety issue should the frame completely fail. My truck is available for inspection. Neither the dealer or Toyota inspected the Issue. I feel Toyota should have had the hindsight to have the dealers remove the gas tank and seal the frame behind the tank.
- Seat belts
The driver side seat belt does not go up and down to adjust position. It is attached to the access door. By not being able to adjust it from going up and down, it makes it hard to strap it into place next to the seat. This may wear out the sides of the seat belt in time. I have not had a Toyota dealer look at it yet. Thanks.
- Unknown or other
Rusty Frame Issue Toyota Tacoma had a warranty enchantment program that expired in 01/31/2019 . I took the Tacoma July 18 2022 to the dealership for regular maintenance and they told me “THE TECH NOTICED 2 LARGES HOLES IN THE FRAME WHICH IS GOING TO COMPROMISE THE STRENGTH OF THE FRAME”. When I…
Rusty Frame Issue Toyota Tacoma had a warranty enchantment program that expired in 01/31/2019 . I took the Tacoma July 18 2022 to the dealership for regular maintenance and they told me “THE TECH NOTICED 2 LARGES HOLES IN THE FRAME WHICH IS GOING TO COMPROMISE THE STRENGTH OF THE FRAME”. When I asked why they didn’t change the frame during the inspection back in 2015 if they knew it was going to be a problem. They refused to give a good answer. I took the Tacoma to the dealership back in 2015 for a frame inspection the nonprofessional inspector chose not change the frame. I contacted Toyota Motor Sales USA and basically was told they couldn’t do anything because the warranty enchantment program already expired. I understand that the warranty enchantment program has expired but I don’t understand how I have full responsibility when I did my part as the customer by taking my Tacoma during the time window of the warranty enchantment program. This is not safe for me, my family of the citizens. I believe there are going to be many more Toyota pickups with this problem.
- Structure › Frame and members
The contact owns a 2005 Toyota Tacoma. The contact stated that while his vehicle was parked, he noticed that the subframe was extremely rusted. The contact noticed a 10-inch crack on the inside driver’s side rear of the vehicle. The vehicle was taken to the dealer dealer and the contact was…
The contact owns a 2005 Toyota Tacoma. The contact stated that while his vehicle was parked, he noticed that the subframe was extremely rusted. The contact noticed a 10-inch crack on the inside driver’s side rear of the vehicle. The vehicle was taken to the dealer dealer and the contact was informed that the subframe needed to be repaired. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was approximately 170,000. Consumer stated rust is the worst near the catalytic converters. It is also bad just in front of the rear tires. It’s a manufacturer flaw where they designed the double wall to where water could get in but not get out and the frame rots from the inside out. This truck was garage kept.
- Power train
The differential drive housing failed due to corrosion resulting in the differential oil leaking out at a significant rate and in loss of lubrication of the differential gears. The condition was detected before any significant loss of material condition or function but could have lead to a loss of…
The differential drive housing failed due to corrosion resulting in the differential oil leaking out at a significant rate and in loss of lubrication of the differential gears. The condition was detected before any significant loss of material condition or function but could have lead to a loss of vehicle control if the differential had failed. The local Toyota Dealer has not reviewed the condition as of yet. A review of several Tacoma internet forum sights finds similar corrosion failures described (oil leaking from differential housing). There is no monitoring/warning indicator for the oil level condition in the differential housing in this vehicle.
- Air bags · Electrical system
My problem was associated with the air bag warning light. It came on and so I took my truck to Big Two Toyota in Chandler AZ. Dealer said I had a faulty clock spring assembly that will prevent the air bag system from functioning properly and was a major safety risk.... So I let Dealer remove and…
My problem was associated with the air bag warning light. It came on and so I took my truck to Big Two Toyota in Chandler AZ. Dealer said I had a faulty clock spring assembly that will prevent the air bag system from functioning properly and was a major safety risk.... So I let Dealer remove and replace it for $511.82. THIS SHOULD HAVE BEEN SAFETY RECALL.... Please look into this issue for me and other Toyota Tacoma truck owners. Thank you.
- Engine · Structure › Body · Unknown or other
The frame of my truck failed at the motor mount. The motor mount has sunk into the frame shifting the motor and effecting performance and other parts. This can be confirmed by anyone. I never received recall information, I can’t find evidence of one issued for this year or my state.
- Engine
The frame caved in to the motor mounts. The motor mounts on the drive side are intact however the frame has broken and the motor mount has fallen into the frame.
- Structure › Body
The contact owns a 2005 Toyota Tacoma. The contact stated while inspecting the vehicle, he noticed punctures and corrosion on the main subframe. The vehicle was not diagnosed or repaired. A dealer was not contacted. The manufacturer had been informed of the failure. The contact stated that an unknown recall repair was performed to the subframe in August 2014. The failure mileage was approximately 255,000.
- Unknown or other
We took our truck to a mechanic to have it looked over before our 18 year old son takes it to college. The mechanic said the frame had so much rust it is unsafe to keep driving it. Once I searched for this problem, Toyota had an extended warranty to cover it, but a recall had never been issued.…
We took our truck to a mechanic to have it looked over before our 18 year old son takes it to college. The mechanic said the frame had so much rust it is unsafe to keep driving it. Once I searched for this problem, Toyota had an extended warranty to cover it, but a recall had never been issued. Therefore, we did not know about it and the warranty time period is up. Now we have a vehicle too unsafe to drive and we didn't know in time to fix it.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10244108TSB: Some 2005 ? 2023 model year Tacoma vehicles equipped with a manual transmission may exhibit a squeak or creak noise from the clutch pedal when it is depressed or released.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10210376OBSOLETE NOTICE Month 09, 2022: This bulletin is now obsolete. Please see T-SB-0014-22.
- 10210375TSB: This Service Bulletin includes procedures to replace damaged or loose front carpet floor retainer(s) without replacing the carpet assembly. Follow the Repair Procedure in this bulletin to replace the loose or damaged carpet floor retainer(s).
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10204571TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10197494Technician Certification Requirements.
- 10197493Updated dealer letter
- 10197490Warranty enhancement program (ZH6): warranty extension for frame corrosion on certain 2005-2010 my tacoma vehicles
- 10197489Brake line color codes.
- 10197488There is a drivetrain vibration and/or noise.
- 10197476Replacement vin plates.
- 10197473Product general information.
- 10197434Technical Instructions for Limited Service Campaign
- 10190460Toyota Safety Recall and Service Campaign - Technician Certification Requirements
- 10190453TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
Every Toyota Tacoma model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.