2005 Toyota Camry
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Camry › 2005
These records cover every 2005 Toyota Camry. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
5 recalls name the 2005 Toyota Camry. Newest first.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010…
Risk and remedy
Risk
If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
Remedy
SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
Toyota IS recalling certain model year 2004 avalon vehicles; 2004 and 2005 camry, camry solara, highlander, and sienna vehicles, 2006 highlander hybrid; 2004 and 2005 lexus es330 and rx330; and 2006 lexus rx400h vehicles manufactured from june 1, 2004 through march 31, 2005, equipped with the 1mz-fe or 3mz-fe engine. the amount of adhesive agent applied…
Risk and remedy
Risk
In some cases, the belt for the power steering pump may become detached from the pulley which could result in a loss of power steering and a sudden increase in steering effort, increasing the risk of a crash.
Remedy
Toyota will notify owners, and dealers will check the crankshaft pulley to identify whether it was produced by the u.s. Supplier. if so, the dealer will replace the pulley with a new one at no charge. the safety recall IS expected to begin during early january 2012. owners may contact toyota at 1-800-331-4331.
Gulf states toyota IS recalling certain model year 2005-2010 vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold between september 1, 2005 and june 2, 2008 without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
This does not meet the standard requirements.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. Dealers will also correct the owner's manual. the safety recall began on may 27, 2010. owners may contact gulf states toyota at 713-580-3300.
Southeast toyota IS recalling certain model year 2005-2011 passenger vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
A driver may overload a vehicle which may increase the risk of a crash.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. the safety recall began on may 27, 2010. owners may contact southeast toyota at 1-800-301-6859.
On certain passenger vehicles equipped with a front passenger power seat, when installing certain rear-facing infant child seat bases onto the seat with an excessively high seatbelt tension, it may be possible to unseat a component called the buckle status switch from the seat belt buckle.
Risk and remedy
Risk
If the switch becomes unseated, the front passenger occupant classification system may mistake the rear-facing child restraint for an unbelted adult occupant, and may not suppress the deployment of the front passenger airbag.
Remedy
Dealers will replace the front passenger seatbelt buckle status switch. this safety improvement campaign (ssc 40M) began on december 20, 2004. owners should contact toyota at 1-800-331-4331 or lexus at 1-800-255-3987..
Owner complaints
721 complaints223 involved a crash10 involved a fire126 injuries18 deaths
What owners report most
Latest complaints
- Electrical system · Engine · Structure › Body
car caught on fire in apartment complex over night. whole car was destroyed
- Electrical system
The contact owned a 2005 Toyota Camry. The contact stated that his daughter's vehicle caught on fire while parked in a residential area. The vehicle was unoccupied during the fire; the contact was alerted by the fire department. The fire originated from the engine, it was reported that the cause of…
The contact owned a 2005 Toyota Camry. The contact stated that his daughter's vehicle caught on fire while parked in a residential area. The vehicle was unoccupied during the fire; the contact was alerted by the fire department. The fire originated from the engine, it was reported that the cause of the fire was faulty wiring. There were 2 vehicles next to the vehicle that was damaged in the event of the fire. The fire was extinguished by the fire department. A police report was filed. The vehicle was totaled. No injuries were reported. The dealer was not notified of the failure. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 142,000.
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2005 Toyota Camry. It was discovered that there was a mileage discrepancy. The vehicle was a private sale. At the time of purchase, the mileage was 125,647; however, the contact found a repair bill from January 10th, 2018, that indicated that the mileage as 233,045. Additionally, a Carfax Report indicated that the mileage was 248,083 on March 15th, 2022.
- Service brakes · Unknown or other · Vehicle speed control
When slowly finishing my entry into a parking spot and braking the car suddenly accelerated to a high speed and bolted over the curb with a planter zone into another parked car directly facing my parking lane hitting the front passenger side. My car was still accelerating and hit another car to the…
When slowly finishing my entry into a parking spot and braking the car suddenly accelerated to a high speed and bolted over the curb with a planter zone into another parked car directly facing my parking lane hitting the front passenger side. My car was still accelerating and hit another car to the left of the first parked car, hitting it in the rear driver side door. My car kept going until I was finally able to get the brake to work and it stopped just before another parking lot curb with planter zone. As far as I can tell the brake and or accelerator malfunctioned dangerously and suddenly. It could also have been a malfunctioning TPS (throttle positioning sensor). I would like my car inspected to determine what caused this malfunction. While everyone involved said they felt fine. One person, in the first car hit, was sitting in the driver seat, luckily no one was in the front passenger seat. That driver said she was ok. The second car was unoccupied. This dangerous incident had no warnings or symptoms prior to the accident. My online research shows that there was a recall that included my make and year for sticky pedal, floormat, and deformed accelerator cable housing. These can cause unintended acceleration or unresponsive pedal. According to the Toyota website my VIN has no outstanding recalls though. I would like my car checked out because any recall repair, if done, may not have been done thoroughly enough to prevent the collision I experienced on September 28, 2025, some 15 years or so after the 2010 recall.
- Service brakes, hydraulic · Steering
The contact owns a 2005 Toyota Camry. The contact’s brother performed brake repair on the vehicle and added Prestone DOT 3 brake fluid to the brake reservoir. The contact stated that several days later, while driving at approximately 25 MPH, the brakes locked up and the vehicle failed to move. The…
The contact owns a 2005 Toyota Camry. The contact’s brother performed brake repair on the vehicle and added Prestone DOT 3 brake fluid to the brake reservoir. The contact stated that several days later, while driving at approximately 25 MPH, the brakes locked up and the vehicle failed to move. The vehicle was taken to the brother’s residence by her brother while driving and depressing the accelerator and brake pedal simultaneously. The contact’s brother flushed the brake lines however, the failure persisted. The contact’s brother became aware of NHTSA Campaign Number: 24E101000 (Service Brakes, Hydraulic, Steering) from the NHTSA.gov website. The vehicle was towed to a dealer where it was diagnosed that there was cross contamination of the braking system and the entire braking system needed to be replaced. The manufacturer was notified of the failure. The failure mileage was unknown.
- Fuel/propulsion system · Unknown or other
Just bought this car on 3/12/2025 Was assured nothing wrong. When taking off it goes about 8 ft then hesitates causing the car behind to almost hit me. Twice it's happened. Pulling out of busy intersections is dangerous. Also it will down shift while driving regularly. Causing cars to run up on you. It also almost died at.a stop sign. Could be tranmission. Not sure exactly.
- Service brakes
While going about 15MPH the car accelerated on its own . Had a hard time finally stopping vehicle breaking and put the car in neutral.
- Unknown or other
Unattended acceleration. I was on a slight incline, trying to enter the highway. I was stopped with my foot on the break with all of a sudden acceleration, and I started to surge forward. I kept my foot on the break and kept the car from moving forward, but it did seemed to it, going into high gear…
Unattended acceleration. I was on a slight incline, trying to enter the highway. I was stopped with my foot on the break with all of a sudden acceleration, and I started to surge forward. I kept my foot on the break and kept the car from moving forward, but it did seemed to it, going into high gear to want to move forward. Then put it in neutral and in reverse to back up a couple feet so that I wasn’t hit by a moving car on the highway. And then drove the car home. And Toyota to report the problem.
- Service brakes, hydraulic › Foundation components › Master cylinder
The contact owns a 2005 Toyota Camry. The contact stated that while driving at slow speeds, the brake was depressed and failed to respond, and the vehicle drove over the parking block. There were no warning lights illuminated. The contact drove the vehicle to her residence. The vehicle was towed to…
The contact owns a 2005 Toyota Camry. The contact stated that while driving at slow speeds, the brake was depressed and failed to respond, and the vehicle drove over the parking block. There were no warning lights illuminated. The contact drove the vehicle to her residence. The vehicle was towed to a local dealer, where it was diagnosed that the brake master cylinder was leaking and needed to be replaced. The vehicle was not repaired. The manufacturer was not contacted. The failure mileage was 72,000.
- Engine
The contact owns a 2005 Toyota Camry. The contact stated while driving approximately 40 MPH, smoke started coming from the engine compartment. The contact stated that the check engine warning light was illuminated. The contact was able to pull over and the vehicle was towed to a local dealer and…
The contact owns a 2005 Toyota Camry. The contact stated while driving approximately 40 MPH, smoke started coming from the engine compartment. The contact stated that the check engine warning light was illuminated. The contact was able to pull over and the vehicle was towed to a local dealer and was diagnosed with needing the engine replaced. The vehicle was not repaired. The manufacturer was not informed of the failure. The failure mileage was approximately 170,000
- Air bags · Air bags › Air bag/restraint control module
July 14, 2021 arriving back to New Jersey from Las Vegas. I pick up my vehicle Wednesday night at Hoboken NJ garage , heading home my 2005 Toyota Camry vehicle air bag (steering wheel) deployed. As I was driving (15mph) no lights was on the dashboard, no pot holes on the street and there was no…
July 14, 2021 arriving back to New Jersey from Las Vegas. I pick up my vehicle Wednesday night at Hoboken NJ garage , heading home my 2005 Toyota Camry vehicle air bag (steering wheel) deployed. As I was driving (15mph) no lights was on the dashboard, no pot holes on the street and there was no accident involving my vehicle. I was hit in the face from the air bag pretty hard it almost made me crash into a electric pole and gas station. 911 was called, the Jersey City police department, fire department and Ambulance arrived. The area was block off looking for car parts or pot holes nothing was found so the police report can be completed. I treated inside the ambulance at the scene, my left hand was burned and head/ neck was hurting. I just decline going to the hospital at the moment. The police called a towing company as I called my car insurance to informing them the situation. As my vehicle was being towed away the police officer said its a malfunction problem it can be a recall I don't know about. The following day I was in touch with my claim agent from my insurance, letting them no where my vehicle was towed at. They informed me to get in touch with the Toyota to see if they going to take full responsibility of the air bag being deployed on July 14, 2021 . I called Toyota Corporation and gave them all the information they asked and then I was told a inspector would reach out to inspect my 2005 Toyota Camry vehicle but it has to be a auto body shop. The place the police got my vehicle towed to the night ofJuly 14, 2021 from Hoboken NJ was not a auto body shop. It was just inside a gate full of other cars. I paid full price for storage fees end up getting my 2005 Camry to a auto body shop in Jersey City NJ were the Toyota Corporation inspector came out July 27 2021 . I called Toyota Corporation multiple times they kept saying it takes up to 30days to make decision from the inspection notes. Yesterday August 25 2001 I received a email they not taking blame.
- Unknown or other
Toyota camry 2005 LE sunroofproblems water
- Seat belts
Locking mechanism for seat belt buckle IS broken
- Tires
Total tire tread separation less than 2 months after purchase
- Engine · Unknown or other · Vehicle speed control
On 03/29/20 I was backing into a parking space in a restaurant parking lot when I pressed on the accelerator the car took off like a rocket ship and I hit a truck. This IS my 1ST accident. it happened so fast but I immediately took my foot off the accelerator and both feet were on the floor and both hands on the wheel after I felt the acceleration. Toyota IS denying my claim.. Can you review?
- Air bags · Steering
TL* the contact owned a 2005 toyota camry. The contact stated that while driving 65 mph, an item flew out of a truck while in motion. The contact moved into the right lane safely, then safely went over back to the left lane. The contact then maneuvered the steering wheel slightly to the right, and…
TL* the contact owned a 2005 toyota camry. The contact stated that while driving 65 mph, an item flew out of a truck while in motion. The contact moved into the right lane safely, then safely went over back to the left lane. The contact then maneuvered the steering wheel slightly to the right, and the steering wheel spin out of control. The contact lost control of the vehicle as a result, the vehicle crashed into a concrete barrier. The contact sustained a bloody nose and ankle injuries. The front passenger sustained three broken vertebrae in the back and broken right arm. Both injured required medical attention. The contact does not remember if a police report was filed. The vehicle was towed to a tow yard. The vehicle was not taken to a dealer. In addition, the contact also stated that the air bags partially deploy. The vehicle was destroyed. The contact called the manufacturer and was informed that they would sent out an inspector and informed the contact that they don't normally sent out inspector only if there was a death involved. A report was filed from the inspector that the steering wheel could come undone. The approximate failure mileage was between 800 or 1000. The vin was not available.
- Air bags · Steering · Unknown or other
My vehicle was in motion 70 mph on the highway I take everyday as I was mildly turning with the road the steering wheel spung to the left and the car went out od control spinning and ended on the right shoulder where than my car started to flip over none stop and the airbags didnt not burst or come out.
- Engine
The engine roared and immediately I was going too fast. put on the brakes and it did not reoccur but it scared me. I was on a city street and turning into the right lane from the left lane. Fortunately the street was not too busy. I did not hit anything.
- Seat belts
TL* the contact owns a 2005 toyota camry. The contact stated that the seat belts were folded over and appeared very loose. The seat belts had no strength and would not tighten. The vehicle was taken to I-10 toyota (78980 varner rd, indio, ca 92203, (760) 565-0447) where the mechanics unfolded the…
TL* the contact owns a 2005 toyota camry. The contact stated that the seat belts were folded over and appeared very loose. The seat belts had no strength and would not tighten. The vehicle was taken to I-10 toyota (78980 varner rd, indio, ca 92203, (760) 565-0447) where the mechanics unfolded the front driver and passenger seat belts; however, the failure recurred. The contact's son had to get the vehicle repaired five times. The seat belts continued to fold and were too tight to fasten. The manufacturer was not made aware of the failures. The failure mileage was 77,800. *Tt *tr
- Service brakes
Brake pedal IS "stuttering" at quick stops. when traffic light turns yellow and I press down brake firmly, the brake works, then releases by itself. I have to quickly press it again to actually stop vehicle. this "stutter" causes the car to lurch forward a few feet. it's a bit scary to not…
Brake pedal IS "stuttering" at quick stops. when traffic light turns yellow and I press down brake firmly, the brake works, then releases by itself. I have to quickly press it again to actually stop vehicle. this "stutter" causes the car to lurch forward a few feet. it's a bit scary to not have control over braking appropriately. should be a recall on brakes!!!! dangerous!!! Happening consistently for last 3 months!!!
- Air bags
Started receiving constant red illuminated air bag icon on the dashboard with no known cause.
- Electrical system · Engine · Service brakes
Takata recalled on the highways my shaking and didn't want to stop
- Unknown or other
I am disputing that this vehicle has me listed as an owner. I have never owned a 2005 toyota camry. I want it removed from my record(s) immediately!!!!
- Unknown or other
Melting shiny dashboard that has created safety issues when driving at night and on sunny days.
- Fuel/propulsion system · Steering
Takata recall, my power steering has been leaking. 05/2018 I noticed it when I was pulling out of driveway, I reversed out and started to turn a little bit and it started to made a grinding noise and kind of hard to turn.(2) takata recall my car IS overheatng as I was pulling into a driveway I…
Takata recall, my power steering has been leaking. 05/2018 I noticed it when I was pulling out of driveway, I reversed out and started to turn a little bit and it started to made a grinding noise and kind of hard to turn.(2) takata recall my car IS overheatng as I was pulling into a driveway I stopped put it in neutral pulled the emergency brake sat there for 3 minutes and the dial went to extremely hot, I turned it off immediately. Ever since then it drives hotter than usual not as hot as it was that day and I can smell burnt rubber when I'm driving or burnt something I'm not getting good gas mileage it idles rough after it's been warmed
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Engine surging
The petitioner owns a my 2006 toyota camry with a 4-cylinder engine that was purchased new in january 2006. The petitioner also previously owned a my 2005 camry. He alleges that both vehicles exhibited vehicle engine surging, which he described as a short duration (1 to 2 second) increase in engine speed occurring…
The petitioner owns a my 2006 toyota camry with a 4-cylinder engine that was purchased new in january 2006. The petitioner also previously owned a my 2005 camry. He alleges that both vehicles exhibited vehicle engine surging, which he described as a short duration (1 to 2 second) increase in engine speed occurring while the accelerator pedal IS not depressed. In an initial interview, the petitioner estimated that 6 to 8 surge incidents, of varying severity, occurred in the my 2006 vehicle over the course of 10,000 miles and 7 months of ownership. The petitioner reports that the brake system IS effective at overcoming the surge. However, he IS concerned about reports filed with nhtsa alleging uncontrolledsurging in my 2002 to 2006 camry vehicles bringing those vehicles to a high rate of speed (in some cases, purportedly, with the brakes applied).after review and analysis of the available information, odi has not identified a vehicle-based defect that would have produced the alleged engine surge in the petitioner?s vehicle, nor was it able to witness such an event when road testing the petitioner?s vehicle.evaluation of a suspect throttle actuator removed from the petitioner?s vehicle did not reveal a component problem. Warranty and parts sales of the actuator are unremarkable.these data do not support the existence of a wide-spread defect or ongoing concern. The fault detection and reaction strategy described in toyota?s technical documents indicates that a loss of throttle control due to a component or system failure would be detected within a one second periodafter which engine power would be limited. The petitioner?s my 2006 vehicle brake system overcomes full engine power at easily achievable brake pedal forces. Based on the analysis conducted, it IS unlikely that nhtsa would issue an order for the notification and remedy of a safety related defect at the conclusion of the investigation requested in the petition.consequently, in view of the need to allocate and prioritize nhtsa?s limited resources to best accomplish the agency?s safety mission, the petition IS denied.please see the march 9, 2007 federal register notice for further details.
- Vehicle speed control
In a letter dated july 8, 2005, and after experiencing two incidents (and one crash) where he alleges his model year (my) 2002 camry accelerated without driver input, mr. Jordan ziprin petitioned the national highway traffic safety administration?s (nhtsa) office of defects investigation (odi) to commence a proceeding…
In a letter dated july 8, 2005, and after experiencing two incidents (and one crash) where he alleges his model year (my) 2002 camry accelerated without driver input, mr. Jordan ziprin petitioned the national highway traffic safety administration?s (nhtsa) office of defects investigation (odi) to commence a proceeding to determine the existence of a defect within the etc system in my 2002 to 2005 toyota and lexus vehicles, or to reopen a prior investigation preliminary evaluation (pe) 04-021.in a letter dated august 18, 2005, mr. Ziprin amended his petition to include allegations of interrelated brake and acceleration problems that allegedly result in inappropriate and uncontrollable vehicle accelerations.the 1172 vehicle owner questionnaire reports cited by the petitioner involve 4 lexus and 15 toyota models defining a population of 7 million vehicles.the reports typically alleged a defect in the brake system, the throttle control system, or a combination of both systems.in its review of the reports, odi a) failed to find evidence to support the existence of a brake related defect in the cited models, and b) determined that many cited products were not equipped with etc.accordingly, odi restricted its analysis to the 432 petitioner reports involving my 2002 to 2005 camry, solara, and ES models (all equipped with etc) that alleged an abnormal throttle control event (see the january 3, 2006 federal register notice for further details).about 40% of the 432 reports involve a driveability concern where the operator intentionally applies the throttle pedal, in expectation that the vehicle will accelerate, and then experiences a delay or hesitation in vehicle response.these reports involve vehicle response to intentional driver commands which odi considers unrelated to the allegations raised by the petitioner.therefore, the reports do not provide support for the investigation requested.about 20% of the reports involve incidents where operators allege vehicle acceleration without driver input and an inability of the brake system to control the vehicle when applied.neither the reports, nor the interviews conducted by odi, identified any vehicle-based cause to explain the incidents or disclosed evidence to support that a failure of the brake or throttle control system had occurred.because these reports do not indicate a distinct safety defect for investigation, the reports do not provide support for the investigation requested by the petitionerthe remaining reports (~ 40%, similar to the petitioner?s and those of pe04-021) typically describe incidents where a vehicle IS being maneuvered at slow speed in a close quarter situation at which point the operator alleges that the vehicle accelerates without driver input and crashes.in the aftermath, operators are unsure of whether the brakes were applied or not, sometimes stating there was insufficient time to use the brake; a crash occurred and the operator believes an uncommanded acceleration caused it.in spite of the effort expended during pe04-021 and during this analysis, odi has not identified any vehicle-based cause to explain the reports, or uncovered any evidence to indicate that a throttle control system failure occurred.therefore, the reports have ambiguous significance and do not constitute a basis on which any further investigative action IS warranted.based on the analysis conducted, it IS unlikely that the nhtsa would issue an order for the notification and remedy of a safety related defect at the conclusion of the investigation requested in the petition.consequently, in view of the need to allocate and prioritize nhtsa?s limited resources t
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10210375TSB: This Service Bulletin includes procedures to replace damaged or loose front carpet floor retainer(s) without replacing the carpet assembly. Follow the Repair Procedure in this bulletin to replace the loose or damaged carpet floor retainer(s).
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10204571TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10197476Replacement vin plates.
- 10197473Product general information.
- 10190460Toyota Safety Recall and Service Campaign - Technician Certification Requirements
- 10190453TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10188913TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2021 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10187241TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10186195TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10177782TSB: OBSOLETE NOTICE June 23, 2020: This bulletin is now obsolete. Please see T-SB-0063-20.
- 10177781TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. ST005-01, SU001-08, and T-SB-0391-08. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Be sure to review the entire content of this service bulletin before proceeding. This Service Bulletin provides best practice procedures for vehicle pulling complaint, diagnosis, and repair for 2002 ? 2021 model year Toyota vehicles. This information supplements Repair Manual procedures when the symptoms are: ?Vehicle Pulling: The vehicle moves to the right or left when the driver holds the steering wheel while driving straight ahead without exerting steering effort. ?Steering Wheel Off Center: The vehicle travels straight, but the steering wheel is not pointed straight ahead. The vehicle is not pulling. Before repairing a vehicle pulling to one side, it is necessary to clearly identify the cause of the pulling condition. Frequently, pulling to one side is diagnosed as a wheel alignment concern. However, the actual cause may be related to the lateral force generated by the tires, vehicle damage, road crown or worn components. Performing a wheel alignment when tire force is the cause could result in the wheel alignment being set at a value outside of specifications. This could then cause other problems such as uneven tire wear, etc. A customer may notice a pull to the left when in the left lanes of travel and notice a pull to the right or no pull when traveling in the right lanes of travel on the very same section of roadway. This road crown effect is environmental and cannot be corrected with suspension adjustments or any other wheel or tire modification discussed in this bulletin.
- 10174891TSB: OBSOLETE NOTICE April 07, 2020: This bulletin is now obsolete. Please see T-SB-0032-20. Replacement Certification Labels and VIN Plates
- 10174890TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, T-SB-0144-08, and T-SB-0304-17. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10172843OBSOLETE NOTICE February 12, 2020: This bulletin is now obsolete. Please see T-SB-0010-20.
Every Toyota Camry model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.