2015 Toyota Camry

Recalls

1 recall names the 2015 Toyota Camry. Newest first.

• Steering › Electric power assist system

  Mar 13, 2015NHTSA 15V144000110,085 vehicles

  Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2015 Camry, Camry Hybrid, Highlander, and Highlander Hybrid, and 2014-2015 Rav4 vehicles. A component of the electric power steering (EPS) electronic control unit (ECU) may have been damaged during the manufacturing process. Over time, this damage may result in failure of…

  Risk and remedy

  Risk

  An unexpected loss of power steering increases the risk of a crash.

  Remedy

  Toyota will notify owners, and dealers will inspect the serial number of the EPS ECU or steering column assembly. If the number is within the affected range, the EPS ECU will be replaced, free of charge. The recall began on May 7, 2015. Owners may contact Toyota customer service at 1-800-331-4331.

  Full recall details →

Owner complaints

What owners report most

1. Steering105
2. Service brakes37
3. Power train36
4. Electrical system31
5. Unknown or other26
6. Engine24
7. Air bags21
8. Vehicle speed control17
9. Fuel/propulsion system14
10. Structure13

Latest complaints

• Sep 4, 2026CA168,000 mi
  Electrical system › Instrument panel › Speedometer/odometer

  Odometer Fraud. The contact purchased a 2015 Toyota Camry. The contact discovered that there was a mileage discrepancy after the purchase. The vehicle was a private sale. At the time of purchase, the mileage was 113,000. It was later discovered upon checking a Carfax report that the mileage was 168,000.

• Sep 2, 2026TXCrash4 injuries
  Air bags

  On August 19, 2026, due to my seizure, my car hit another car, then fence, and finally trees in a backyard. I had fractures in my brow bone, breast, ribs, and backbone because of the hit. My wife and daughter in the back seat also had serious injuries. The side airbag came out but front airbag didn’t. The malfunction of front airbag risked my and my families’ life.

• Aug 26, 2026VA
  Equipment › Electrical › Infotainment

  The contact owns a 2015 Toyota Camry. The contact stated that the infotainment system had become inoperable. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was notified of the failure and referred the contact to the dealer. The failure mileage was unknown.

• Jun 30, 2026MD
  Service brakes
  The vehicle's braking system intermittently self-activates, engaging the brakes with no obstruction, pedestrian, or object present in the vehicle's path and no driver input. This creates an unpredictable, unprovoked braking event while driving, which is a direct safety hazard to the driver and to…

  The vehicle's braking system intermittently self-activates, engaging the brakes with no obstruction, pedestrian, or object present in the vehicle's path and no driver input. This creates an unpredictable, unprovoked braking event while driving, which is a direct safety hazard to the driver and to other vehicles on the road that may not anticipate sudden deceleration. A distinct pattern has been observed: after the brake pedal is touched, the vehicle behaves as though it believes it is on an incline, repeatedly reapplying the brakes on its own in a pulsing or repeated manner, even on flat, level ground with no incline present. This repeated self-application occurs without further driver input. The dealership has attempted repairs on multiple occasions. On the first visit, the brake booster was replaced. This did not resolve the issue, and additionally caused the brake lights to remain illuminated overnight, draining the vehicle battery. On a second visit, a brake bracket was replaced; the self-braking defect recurred within minutes of leaving the dealership. On a third visit, the vehicle was retained by the dealership for approximately three weeks, during which a brake switch was replaced; the defect recurred after approximately one day of normal driving. The problem has been reproduced and acknowledged by the dealership's service department on multiple occasions, as evidenced by the repeated repair attempts targeting the braking system (brake booster, brake bracket, brake switch). Despite three separate repair attempts across different brake-related components, the dealership has been unable to identify or correct the root cause. Dealership service management stated they can only make repair recommendations and cannot guarantee that any given repair will resolve the issue, and that their process involves replacing parts until the defect happens to stop occurring. The dashboard brake warning light is on, and an ABS warning light also illuminates intermittently.

• May 26, 2026CACrash1 injury
  Unknown or other
  On Friday, December 5, 2025, I was coming out of the driveway at the Jack In The Box on the corner of El Camino & Nobili Avenue in Santa Clara. My foot was on the break as I was going to stop at the end of the driveway to check to see if there was any traffic coming down Nobili before I exited the…

  On Friday, December 5, 2025, I was coming out of the driveway at the Jack In The Box on the corner of El Camino & Nobili Avenue in Santa Clara. My foot was on the break as I was going to stop at the end of the driveway to check to see if there was any traffic coming down Nobili before I exited the Jack In The Box driveway. All of a sudden before I even hit the end of the driveway while I had my foot on the brake, the car started to speed up (unintentional acceleration)and I continued to press my foot down harder on the brake, but nothing could stop it. A lot of black smoke came up out of the steering wheel area where it attached to the dashboard & all of the air bags around the car deployed. Then my car completely turned itself around and the front of my car was now facing the driveway that I had just come out of. This torque of acceleration and braking is why my car spun around 180 degrees. The vehicle had sustained damage to the front end, the hood, front bumper cover, right front head lamp was cracked, and the Toyota emblem was missing. (See attached photos taken at the time of the accident) Since all of the air bags in the whole car had completely deployed, I found that the only way I could get out of the car was to slide myself under the air bag that surrounded the driver side door. As I got out of the car, the rib that is directly under my right breast began to hurt very badly and it was hard for me to take a breath with the pain from that rib. I also had a bad headache, too. Plus, the top of my left hand was all red and felt like something had scratched the whole back of my hand. It hurt to touch it. I was also light-headed.The car, I was told, looked like I had hit a wall. The whole left front side of the car was severely mangled - the hood, the fender, and the tire was flat. The shocking thing was that I had not had an encounter with any car, nor had they hit me, to account for this damage.The Police & Fire Dept.& EMT's were called.

• May 20, 2026MO
  Structure › Body

  My white paint has started chipping in big chucks all over the car on every panel

• May 11, 2026GA
  Unknown or other

  Factory paint is delaminating and peeling in large sheets without collision damage. This appears consistent with known Toyota paint defects affecting similar vehicles.

• Jan 18, 2026MI
  Visibility › Defroster/defogger/hvac system

  When the air conditioner is set to heating, cold air blows on the passenger side, while the driver’s side works correctly.

• Nov 24, 2025AZ
  Seat belts

  Seatbelts do not retract properly. It is the driver side, passenger side and rear passenger side

• Oct 3, 2025IL
  Air bags

  !

• Sep 12, 2025IL82,600 mi
  Service brakes, hydraulic
  The contact owns a 2015 Toyota Camry. The contact stated that while driving at various speeds and attempting to decelerate, there was an abnormal sound while depressing the brake pedal and the brake went to the floorboard. No warning light was illuminated. The vehicle was towed to a local dealer…

  The contact owns a 2015 Toyota Camry. The contact stated that while driving at various speeds and attempting to decelerate, there was an abnormal sound while depressing the brake pedal and the brake went to the floorboard. No warning light was illuminated. The vehicle was towed to a local dealer where it was diagnosed and determined that the brake master cylinder and brake pump might need to be replaced. The vehicle was not repaired due to the cost. The manufacturer was made aware of the failure. The failure mileage was approximately 82,600.

• Jul 18, 2025NC
  Tires
  P20565R16 all four tires. These tires from Bridgestone have a UTQG rating of 640 A A with a "warranty" by the manufacture of 75,000 miles. The current set of tires on my car have approximately 18,000 miles and are very worn. The tire wear gauge reads 5/32 reaming tread. I doubt that the next…

  P20565R16 all four tires. These tires from Bridgestone have a UTQG rating of 640 A A with a "warranty" by the manufacture of 75,000 miles. The current set of tires on my car have approximately 18,000 miles and are very worn. The tire wear gauge reads 5/32 reaming tread. I doubt that the next 3/32 (5/32 - 2/32) will give me the remaining 57,000 miles. I buy my tires based on the UTQG rating. It's a good indicator of tire wear and has been fairly reliable up to this point. I Googled the tire to see if others have similar experience. The answer was YES. It appears that Bridgestone has a problem with tire wear on these tires. Reviews all pointed to terrible tire wear. Sadly, My wife's car had Firestone tires that we just replaced. Those had only 22,000 miles, but had a 600 UTQG rating. It appears that Firestone /Bridgestone do not know how tear wear works. First time in my life I was this disappointed in a tire company, but Firestone certainly had it's share of problems in the past. Someone needs to do an evaluation of Firestone tire rating practice. For me, it's too late. Thanks.

• Jun 23, 2025TX174,000 mi
  Steering
  The contact owns a 2015 Toyota Camry. The contact stated that while driving at an undisclosed speed, the contact became aware that the electronic power steering was not functioning properly, requiring the steering wheel be manually returned to center upon completing a turn. No warning lights were…

  The contact owns a 2015 Toyota Camry. The contact stated that while driving at an undisclosed speed, the contact became aware that the electronic power steering was not functioning properly, requiring the steering wheel be manually returned to center upon completing a turn. No warning lights were illuminated. The vehicle was taken to an independent mechanic, who diagnosed a failure with the steering sensor. The vehicle was not repaired. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 15V144000 (Steering), but the VIN was not included. The manufacturer was notified of the failure but provided no assistance. The failure mileage was 174,000.

• Jan 28, 2025MACrash
  Electrical system · Steering
  I am writing to report a serious incident involving my 2015 Toyota Camry LE (VIN: [XXX] ), which I believe is connected to a potential defect or recall issue. On [XXX], I was involved in a car crash that resulted in my vehicle being totaled. The circumstances of the crash strongly suggest that…

  I am writing to report a serious incident involving my 2015 Toyota Camry LE (VIN: [XXX] ), which I believe is connected to a potential defect or recall issue. On [XXX], I was involved in a car crash that resulted in my vehicle being totaled. The circumstances of the crash strongly suggest that it was caused or exacerbated by issue sudden loss of power steering assistance The details of the crash are as follows: Date/Time: [XXX] Location: [XXX] Fall River While driving at low speeds, I experienced a sudden loss of power steering, making it difficult to control the vehicle and avoid a collision. I am deeply concerned about the potential safety implications of this issue and believe it may be related to [NHTSA campaign ID 15V144000 or defect steering electric power assis INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

• Dec 13, 2024WA
  Air bags · Electrical system · Lane departure › Blind spot detection
  The sunroofs have a drain which sometimes can plug up. This car was maintained several times a year since purchase by Toyota dealer. When the drain plugged up this fall, water backed up and came down inside of the passenger compartment on top of the electrical fuses, body computer. The leak IS…

  The sunroofs have a drain which sometimes can plug up. This car was maintained several times a year since purchase by Toyota dealer. When the drain plugged up this fall, water backed up and came down inside of the passenger compartment on top of the electrical fuses, body computer. The leak IS NOT DETECTABLE by owner or occupant. But when it manifests itself, it does so with the Blind Spot Monitor failing randomly, the seat belt warning lights might or might not work, the airbag safety system fails, sometimes the whole instrument dash acts erractic including random on/off blinking, the tire pressure monitoring system fails. All these problems can occur before owner is ever aware of the problem. Since one of the items that is getting corrosion is a fuse block - potential fire while parked in a garage or while being drive is a possibility. In an accident failure of air bags can result in a fatality. I'm an engineer, so when things started blinking on dash - I took pictures or had another occupant take pictures. I showed them to the dealer service - they didn't make the connection with corrosion on the body computer that monitors and manages all the systems including the anti-lock and rollover system. It's in for repair at dealer now, now idea on the cost - but they've said damage is extensive AND we caught it before most people encounter it. I checked and could find no Toyota Service Bulletin that warned to look for the problem, repair techs had vehicle for week trying to find problem - and it took me insisting on looking for corrosion before they found it. This should result in: 1)Toyota special service bulletin to inspect every year and verify sunroof drain not blocked. 2) read diagnostics codes of the body network computer for issues, 3)Toyota special service recall to repair damage free to customers.

• Nov 12, 2024VA
  Service brakes

  The ABS system failure with out warning and it was hard to control on the HWY

• Oct 15, 2024IL110,000 mi
  Power train › Automatic transmission › Torque converter
  The contact owns a 2015 Toyota Camry. The contact stated while driving 20-30 MPH and depressing the accelerator pedal, the vehicle started shuddering and there was a 20-30 seconds lag in acceleration, which required the contact to release and to depress the accelerator pedal until the vehicle…

  The contact owns a 2015 Toyota Camry. The contact stated while driving 20-30 MPH and depressing the accelerator pedal, the vehicle started shuddering and there was a 20-30 seconds lag in acceleration, which required the contact to release and to depress the accelerator pedal until the vehicle responded as needed. There was no warning light illuminated. The vehicle was taken to the dealer, where it was diagnosed and determined that the torque converter had failed and needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline for assistance. The failure mileage was approximately 110,000.

• Oct 11, 2024CACrash1 injury
  Air bags
  The contact owned a 2015 Toyota Camry. The contact stated while driving at 70 MPH during nighttime, an animal jumped on the roadway and veered to the side attempting to avoid the animal. The steering wheel failed to turn in the desired direction and crashed into a guard rail. During the crash, the…

  The contact owned a 2015 Toyota Camry. The contact stated while driving at 70 MPH during nighttime, an animal jumped on the roadway and veered to the side attempting to avoid the animal. The steering wheel failed to turn in the desired direction and crashed into a guard rail. During the crash, the contact's head was hurt by the steering wheel, and no air bags deployed. The vehicle was towed by the insurance company and deemed a total loss. A police report was filed. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was unknown. The VIN was not available.

• Aug 1, 2024CA84,256 mi
  Electronic stability control (esc) · Exterior lighting › Headlights · Service brakes, hydraulic
  The contact owns a 2015 Toyota Camry. The contact stated while driving 40 MPH and attempting to activate the headlights, the vehicle lost motive power with the ABS and stabili-trak warning lights illuminated. The vehicle was able to restart; however, the failure recurred. The dealer was not…

  The contact owns a 2015 Toyota Camry. The contact stated while driving 40 MPH and attempting to activate the headlights, the vehicle lost motive power with the ABS and stabili-trak warning lights illuminated. The vehicle was able to restart; however, the failure recurred. The dealer was not contacted, and the vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 84,256.

• Jul 25, 2024CA
  Electrical system · Steering

  I have the same issue described in a recall notice for my year make and model. My EPS light is coming on and I'm losing power to the vehicle. My VIN was not included in the recall. Steering: Electric power assist system Recall date 2015-03-12 Recall no.15V144000. This is very concerning as it could cause an accident resulting in injuries or death. I would like to have my vehicle checked for the recall.

• Jun 6, 2024TXCrash
  Air bags

  I was in an accident going approximately 35 mph. The car was deemed a total loss after inspection. There was damage to both left and right bumper, hood and pretty much the entire front of the car crumpled. The airbags did not deploy at all. I believe they failed and should have deployed

• May 7, 2024IL64,000 mi
  Power train

  The contact owns a 2015 Toyota Camry. The contact stated that while driving at undisclosed speeds, the check engine warning light illuminated. The vehicle was taken to a local dealer where it was diagnosed that the transmission needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and a case was opened. The failure mileage was approximately 64,000.

• Mar 2, 2024PA
  Electrical system · Steering · Vehicle speed control
  Intermittent EPS warning light illuminates during highway driving with steering wheel lock-up subsequently followed by a reset of certain electrically powered items associated with but not necessarily limited to the following systems: 1. Stability Control System warning indication 2. TPMS light 3.…

  Intermittent EPS warning light illuminates during highway driving with steering wheel lock-up subsequently followed by a reset of certain electrically powered items associated with but not necessarily limited to the following systems: 1. Stability Control System warning indication 2. TPMS light 3. Radio power cycles 4. Check engine light. After turning the car off and then back on again these issues clear initially, but will intermittently happen at random durations of time anywhere from an additional 1 to 3 hours of driving. I've been discussing with Toyota Customer Service, who has known issues with the 2015 Toyota Camry under NHTSA Campaign ID: 15V144000, but they are trying to tell me that it only applies to V6 and Hybrid 2015 Camry's. I feel that this is also applicable to my vehicle VIN: [XXX] . I feel Toyota is refusing to acknowledge this critical safety issue affecting more 2015 Toyota Camry vehicles. I've never had an issue like this with 5 other previously owned vehicles. When asked if I could pay for the fix myself they informed me that it is not possible without a recall! My Toyota dealer is refusing to fix the issue and Toyota Customer Service hasn't responded in over 3 weeks to my inquiry. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

• Feb 17, 2024IA
  Air bags
  The steering wheel clockspring ribbon was worn down in the middle, resulting in an open circuit of the SRS. The wear is between the ribbon and inside wall of the container that houses the ribbon. It appears to be a designing flaw or manufacturing defect. The wear was discovered by tearing down the…

  The steering wheel clockspring ribbon was worn down in the middle, resulting in an open circuit of the SRS. The wear is between the ribbon and inside wall of the container that houses the ribbon. It appears to be a designing flaw or manufacturing defect. The wear was discovered by tearing down the clockspring unit. Airbag light on the dashboard was lit in November 2023. Replaced the clockspring unit on 2/17/2024. Without fixing the problem, the airbag on the steering wheel does not function when needed.

• Feb 7, 2024RI
  Engine

  The car burns oil excessively, I bought this car 11/07/2022 every week to 2 weeks I have to put 2-2 1/2 quarts of oil in. There is nothing wet under the car no oil stains anywhere so oil is not leaking. I spend so much money on oil it's not normal.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
• 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
• 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
• 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
• 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11003619Customers have expressed concerns about the performance of Qi Wireless Chargers. Wireless chargers on applicable vehicles are designed to work with Qi Certified devices only. MagSafe devices, that are not Qi Certified, may not charge as expected with Qi Wireless Chargers.
• 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11003564Customers have expressed concerns about the performance of Qi Wireless Chargers. Wireless chargers on applicable vehicles are designed to work with Qi Certified devices only. MagSafe devices, that are not Qi Certified, may not charge as expected with Qi Wireless Chargers.
• 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
• 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
• 10244115TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks
• 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
• 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
• 10230369DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10230368DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10230367DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
• 10227920DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10227919DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10227918DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
• 10227916DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
• 10227915TI: TECHNICAL INSTRUCTIONS Customer Support Program ZKG Multiple Models and Model Years Vehicles Painted with Blizzard Pearl (070) or Super White (040) Paint Color Coverage for Peeling of Factory-Applied Paint
• 10227914CSP: Customer Support Program ZKG ? Paint Repair Process
• 10227913DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
• 10227912DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
• 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
• 10224108TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition

Every Toyota Camry model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.