2018 Toyota Camry
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Camry › 2018
These records cover every 2018 Toyota Camry. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
8 recalls name the 2018 Toyota Camry. Newest first.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2018 Camry, 2019 Lexus NX300, and 2019 RX350L vehicles. The low-pressure fuel pump inside the fuel tank may fail.
Risk and remedy
Risk
Fuel pump failure can cause an engine stall, increasing the risk of a crash.
Remedy
Dealers will replace the fuel pump assembly, free of charge. Owner notification letters were mailed March 12, 2025. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 25TA01 and 25LA01.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2018-2019 Camry vehicles. The vane cap inside the vacuum pump may break, causing the pump to fail, which could result in a sudden loss of braking assist.
Risk and remedy
Risk
A sudden loss of braking assist can increase the risk of a crash.
Remedy
Dealers will repair or replace the vacuum pump, as necessary, free of charge. Owner notification letters were mailed May 16, 2022. Owners may contact Toyota customer service at 1-800-331-4331.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2018-2019 4Runner, 2019-2020 Avalon, 2019 Corolla Hatchback, 2017-2019 Highlander, 2018-2020 Camry, 2020 Corolla, 2018-2019 Land Cruiser, 2017-2020 Tacoma, 2019-2020 RAV4, 2019-2020 Sequoia, 2017-2020 Sienna, 2019-2020 Tundra, 2018-2020 Lexus ES350, 2017 Lexus GS200t, 2017-2019 Lexus…
Risk and remedy
Risk
If the fuel pump fails, the engine can stall while driving, increasing the risk of a crash.
Remedy
Toyota will notify owners, and dealers will replace the fuel pump assembly with an improved one, free of charge. Owners of specific models were notified that remedy parts were available starting January 21, 2021. Owners of other models will be notified as remedy parts become available. Remedy parts should be available for all affected vehicles by late March 2021. Owners may contact Toyota customer service at 1-888-270-9371 or Lexus customer service at 1-800-255-3987. Note: This recall is an expansion of recall 20V-012. Toyota's number for this recall is 20TA02. Lexus' number for this recall is 20LA01.
Toyota Motor Engineering & Manufacturing (Toyota) recalled certain 2018-2019 4Runner, Highlander, Camry, Land Cruiser, Sequoia, Sienna, Tacoma and Tundra, and Lexus RC 300, RC 350, GS 350, GX 460, IS 300, LC 500, LS 500, LX 570, RX 350L, and 2019 Toyota Avalon and Corolla, and certain Lexus NX 300, and ES 350 vehicles on January 13, 2020. On March 4…
Risk and remedy
Risk
If the fuel pump fails, the engine can stall while driving, increasing the risk of a crash.
Remedy
Toyota will notify owners, and dealers will replace the fuel pump, free of charge. The recall began May 4, 2020. Owners may contact Toyota customer service at 1-888-270-9371 or Lexus customer service at 1-800-255-3987. Toyota's numbers for this recall are 20TB02 and 20TA02 for Toyota vehicles and 20LB01 and 20LA01 for Lexus vehicles.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2017-2019 Toyota Camry, Corolla, Rav4, Sienna, and Yaris iA vehicles equipped with factory-installed floor mats. The load carrying capacity modification label may be incorrect. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number…
Risk and remedy
Risk
An incorrect label may lead to unintentionally overloading the vehicle, increasing the risk of a crash.
Remedy
SET will notify owners and provide a corrected label for placement over the inaccurate label, free of charge. The recall began August 23, 2019. Owners may contact Toyota customer service at 1-888-270-9371. SET's number for this recall is SET19A.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2018 Toyota Camry and Highlander vehicles, 2017 Toyota Sienna and Tacoma vehicles and 2017 Lexus RX350 vehicles. During the manufacturing process, the oil galley in the rotor for the brake booster vacuum pump assembly may have been improperly machined possibly resulting in a sudden loss…
Risk and remedy
Risk
A sudden loss of braking assist can increase the risk of a crash.
Remedy
Toyota will notify owners, and dealers will replace the brake booster vacuum pump, free of charge. The recall began on May 9, 2018. Owners may contact Toyota customer service at 1-888-270-9371, or Lexus customer service at 1-800-255-3987. Toyota's numbers for this recall are J0K/JLD.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2018 Toyota Camry vehicles equipped with a 2.5L, four-cylinder engine. The pistons on these vehicles may be larger than specified, possibly causing the engine to stall.
Risk and remedy
Risk
An engine stall can increase the risk of a crash.
Remedy
Toyota will notify owners, and dealers will inspect the production date codes of the pistons and, if an engine contains a piston from the affected production period, the engine assembly will be replaced, free of charge. The recall is expected to begin May 25, 2018. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's number for this recall is J1M/J0M.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2018 Toyota Camry vehicles equipped with V6 engines. These vehicles have fuel delivery pipes that may not be properly connected to the fuel hoses in the engine compartment.
Risk and remedy
Risk
The improperly connected hoses may leak fuel, which, in the presence of an ignition source, can increase the risk of a fire.
Remedy
Toyota will notify owners, and dealers will inspect the fuel pipes for the correct installation, correcting them as necessary, free of charge. The recall is expected to begin March 30, 2018. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's number for this recall is J0G.
Owner complaints
754 complaints46 involved a crash4 involved a fire45 injuries
What owners report most
Latest complaints
- Forward collision avoidance › Automatic emergency braking · Service brakes
Vehicle Safety Complaint – 2018 Toyota Camry On October 26, 2026, the driver was operating a 2018 Toyota Camry on a public roadway at approximately 45 mph when the vehicle unexpectedly activated its automatic emergency braking system. The dashboard displayed a “BRAKE!” warning, immediately…
Vehicle Safety Complaint – 2018 Toyota Camry On October 26, 2026, the driver was operating a 2018 Toyota Camry on a public roadway at approximately 45 mph when the vehicle unexpectedly activated its automatic emergency braking system. The dashboard displayed a “BRAKE!” warning, immediately followed by extremely forceful braking, comparable to someone suddenly slamming their foot on the brake pedal. The vehicle rapidly decelerated from approximately 45 mph to a complete stop, despite there being no vehicles, pedestrians, or visible obstacles in front of or near the vehicle. The sudden braking caused the driver’s body to lurch forward. According to the driver, the seat belt did not noticeably tighten during the incident. After the vehicle came to a complete stop, the brakes released, and the car slowly began rolling forward without the driver pressing the accelerator. The driver did not intentionally initiate the emergency braking. This unexpected activation created a serious safety hazard and could have resulted in a rear-end collision, loss of vehicle control, or serious injury. The incident raises concerns about a possible malfunction of the vehicle’s Pre-Collision System (PCS), including its radar sensor, forward-facing camera, calibration, or associated software. A VIN search through the NHTSA database indicated zero outstanding safety recalls for this vehicle. I am requesting that NHTSA document and investigate this incident as a potential safety defect involving unintended automatic emergency braking in the 2018 Toyota Camry.
- Power train
Not sure if i'm reporting this correctly. my camry started making noise and it was a transmission issue. i went online and it seems to be a common complaint for 2018 and 2019 toyota camry's, when they reach approx 125k to 135 k. don't know if anything can be done but it would be nice to find out…
Not sure if i'm reporting this correctly. my camry started making noise and it was a transmission issue. i went online and it seems to be a common complaint for 2018 and 2019 toyota camry's, when they reach approx 125k to 135 k. don't know if anything can be done but it would be nice to find out if this is more common then expected and corrections are being made. I even had a routine service i believe last month and all they indicated was it needed a transmission service. thanks
- Vehicle speed control
transmission failure and power loss while driving
- Electrical system · Engine · Fuel/propulsion system
This vehicle is experiencing the same problems since 2022 despite multiple attempts to have the vehicle repaired. The fuel pump was part of the recall and it was replaced in 2020. When these problems started in 2022, I was told they need the codes to figure out what’s going on but yet they still…
This vehicle is experiencing the same problems since 2022 despite multiple attempts to have the vehicle repaired. The fuel pump was part of the recall and it was replaced in 2020. When these problems started in 2022, I was told they need the codes to figure out what’s going on but yet they still couldn’t give me an answer. There was only one code that they addressed which was to replace an engine coil but the car continues breaking down. This most recent time, I fueled the vehicle and it would not start when I was finished. This had happened at least 3 times, all after fueling the vehicle. The car will also shut down while driving, and it is extremely dangerous when power steering fails and there is no acceleration even with the pedal pushed down all the way to the floor in the middle of traffic. I am terrified that I will not only hurt myself but others when this failure causes an accident. One time, the vehicle broke down on a major highway during rush hour, but I was able to get to safety. Other times I had to call a tow because the car was inoperable. The dash lights up with “check engine” and “ics malfunction visit your dealer” each time. I have called corporate and made 15+ trips to get the vehicle diagnosed/fixed but still do not have any answers.
- Forward collision avoidance › Warnings · Fuel/propulsion system
Unknown
- Engine · Vehicle speed control
Transmission defective.
- Power train
Total transmission failure at about 107,770 miles.
- Engine
My 2018 Toyota Camry LE went into Limp mode while drive on the highway causing jerking while driving and tons of error codes on the dash, and issues with safety systems shutting off and accelration. After towing to a dealership, dealership gave me the following description of the defect: Coolant is…
My 2018 Toyota Camry LE went into Limp mode while drive on the highway causing jerking while driving and tons of error codes on the dash, and issues with safety systems shutting off and accelration. After towing to a dealership, dealership gave me the following description of the defect: Coolant is coming through the cylinder walls due to a hairline fracture in the cylinder causing 2 of the 4 cylinders to misfire and coolant to mix with usual contents. We aren't able to identify where the cause of this problem is but it makes the most economical sense to replace the engine with a lower mileage engine and replace the neighboring parts to support the less old engine. I was quoted $8300 approximately. the same vehicle just a few years older are recalled already for the exact same thing - NHTSA Recall 20V064000. The NHTSA Recall states: "The subject vehicles are equipped with a 2.5L 4 Cylinder engine (A25A) and may have been produced with engine blocks containing higher porosity levels. Higher levels of porosity could create cracks in the cooling passages, resulting in coolant leaking internally and/or externally. This may lead to engine noise, engine smoke, warning lights/malfunction indicator illumination, an audible chime sounding, and/or, in some cases, engine overheating and possible internal mechanical engine damage (e.g. seizing of internal engine components). If engine overheating or internal mechanical engine damage were to occur on involved conventional gasoline vehicles, a vehicle stall while driving at higher speeds could occur without prior warning to the driver, increasing the risk of crash."
- Power train
The contact owns a 2018 Toyota Camry. The contact stated that while driving 60 MPH, the vehicle was jerking and hesitating. The failure was a recurring failure. The dealer was contacted and was able to reproduce the failure. The vehicle was diagnosed with transmission failure. The contact was informed that the transmission needed to be replaced. The failure mileage was approximately 69,000.
- Fuel/propulsion system
I am filing a formal complaint regarding a severe safety recall compliance violation and predatory conditional repair tactic committed by an authorized Toyota dealership. My vehicle exhibited severe engine sputtering and stalling symptoms. This vehicle had an active, federally mandated safety…
I am filing a formal complaint regarding a severe safety recall compliance violation and predatory conditional repair tactic committed by an authorized Toyota dealership. My vehicle exhibited severe engine sputtering and stalling symptoms. This vehicle had an active, federally mandated safety recall for a defective low-pressure Denso fuel pump known to cause engine stalling. Upon presenting the vehicle for the safety recall, the dealership's service advisor explicitly and verbally stated that they would not touch, service, or perform the open fuel pump safety recall until I first authorized and paid for an out-of-pocket throttle body replacement. The vehicle was throwing diagnostic trouble codes P2117, P2190, and P2197. While P2117 relates to throttle performance, codes P2190 and P2197 indicate severe fuel delivery, fuel starvation, and air-fuel ratio calculation failures. Low fuel pressure from the recalled, defective fuel pump causes the engine to sputter and die, which forces the electronic throttle body to scramble to catch the dropping RPMs—subsequently tripping the secondary P2117 code. The dealership used this secondary symptom code to withhold a federal safety recall and force a highly inflated $1,351.00 customer-pay repair under duress. To get my vehicle repaired and safe for the road, I was forced to pay for the throttle body. Both the $1,351 throttle body repair and the free fuel pump safety recall were completed on the exact same visit on the exact same day, creating an undeniable paper trail of a forced conditional repair. Holding a critical safety recall hostage behind a costly commercial repair violates federal recall regulations under the National Traffic and Motor Vehicle Safety Act. I am demanding a full corporate goodwill reimbursement of $1,351.00 from Toyota Motor North America and a formal compliance investigation into this dealership's service department practices.
- Power train
2018 Toyota Camry approx 126,000 miles. Transmission had always been rough-- previously jerking and was told by dealer technician that shocks needed to be replaced soon. While out of state and traveling in remote area, the car gave out. Was advised by out of state Toyota dealership technician…
2018 Toyota Camry approx 126,000 miles. Transmission had always been rough-- previously jerking and was told by dealer technician that shocks needed to be replaced soon. While out of state and traveling in remote area, the car gave out. Was advised by out of state Toyota dealership technician that the transmission had blown and the inside of the mechanism had imploded and the car could not be moved at all. According to review of other consumer complaints Toyota was aware of the mechanical defect with transmission and related defective software but failed to disclose to the consumer. Toyota has failed to issue a recall.
- Steering
Tsb-0028-22 - car diagnosed at dealership with issue stated within the service bulletin and as noted in the civil action suit. However, specific vin IS not included in the covered list by manufacturer. Customer will escalate until resolution *intermediate steering shaft assy
- Engine
On September 6, my 2018 toryota camry just stoopped all of the suddden in the middle of a 6 lane road. No warning lights or such until that exact moment. The car went into safe moode as I was driving. The water pump and associated parts failed. The electrical part of the water pump went and took…
On September 6, my 2018 toryota camry just stoopped all of the suddden in the middle of a 6 lane road. No warning lights or such until that exact moment. The car went into safe moode as I was driving. The water pump and associated parts failed. The electrical part of the water pump went and took the pump, thermostat, gaskets, etc. to be repaired after just dying on the road. The car had only 32465 miles at the time of the breakage. The car is out of warranty, but with such low milage this is and unusual repair to be made on a car only8 years old with low milage. It was a $1700 dollar repair. The company has not made any assitance availble, i have called and spoke with someone, have written a letter and now I felt that it was important enough to come here. There are Facebook pages with "broken camry water pumps" up so this is to my way of thinking an ongoing problem. I was lucky I was not hit when the car "stopped" on the road with no warning. The car has been well maintained at an authorized Toyota dealer the whole time I have had it. I am concerned that this is an ongoing problem with the camry.
- Electrical system
I brought my 2018 Camry in because of check engine light and was told it was due to the vsv purge valve ($372) and the coolant bypass valve ($1100)- *note I later found out due to my own research that Toyota has an National Warranty Extensions on this part due to failure on 2018-2023 models! After…
I brought my 2018 Camry in because of check engine light and was told it was due to the vsv purge valve ($372) and the coolant bypass valve ($1100)- *note I later found out due to my own research that Toyota has an National Warranty Extensions on this part due to failure on 2018-2023 models! After agreeing to replace the costly bypass valve I was called and told the light was still on so they ran ANOTHER diagnostic test that now shows a "new" code that I need a new computer ($1400). The faulty part causes computer damage and I was advised online to speak to the service manager and ask for "consequential damage review" as well as have them cover the part since the warranty covers 10 years or 100k miles. Well of course I was denied because my car is over 100k (what 2018 wouldnt be) and told to reach out to Corporate who also said the same thing. What is interesting is this faulty part extension was just established December 2024 which would not help those of us who were already at the 100k mark when they found this error out. I just paid over $1000 today (not to mention all the times I brought it in before for diagnostic test) and my car runs EXACTLY THE SAME- BAD! AND THE ENGINE LIGHT IS STILL ON!!!!!! I will not give them another $1500 for a new computer. I am now looking for a specialized automotive electronics repair company to repair my computer for likely less than $200! Toyota's service department is a SCAM and I would not recommend buying their cars to anyone going further. My family has 3 Toyotas in our driveway now! I am very disappointed and need someone at Toyota to make this error better!
- Power train · Service brakes · Vehicle speed control
The transmission quit moving the car forward in traffic which could have caused a collision. When the transmission started shifting weird and not accelerating normally, the ABS Sensor malfunction light came on. I towed the car to a toyota dealership in [XXX] and they said I needed the transmission…
The transmission quit moving the car forward in traffic which could have caused a collision. When the transmission started shifting weird and not accelerating normally, the ABS Sensor malfunction light came on. I towed the car to a toyota dealership in [XXX] and they said I needed the transmission replaced for $10000(new), which I could not afford. I was expecting it to be a sensor since that was the light that came on. I had the transmission rebuilt by an independent mechanic and during the first test drive, the car applied brakes and came to a complete stop. We took the car to the toyota dealership for a program update that the information we had said was needed. The dealership stated there was no update available. They also told me I could drive the car home. After going about three miles from the dealership the transmission stopped moving the car again in traffic which again could have caused a collision. There were codes being thrown that would not be there when the transmission was rebuilt and subsequent reevaluations. The car has been unusable since XXX INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Power train
My regularly serviced 2018 Toyota Camry is now in need of a $10,000 transmission replacement. Based on research, it is not normal for a modern Toyota Camry to need a new transmission at 125k miles. Toyota has DOCUMENTED complaints that the 2018 Camry's 8-speed automatic transmission has a known…
My regularly serviced 2018 Toyota Camry is now in need of a $10,000 transmission replacement. Based on research, it is not normal for a modern Toyota Camry to need a new transmission at 125k miles. Toyota has DOCUMENTED complaints that the 2018 Camry's 8-speed automatic transmission has a known history of premature failures and is the subject of thousands of owner complaints. A recall needs to be enforced as Toyota has sold DEFECTED 2018 vehicles! I purchased this vehicle in 2018. Anyone who bought the 2018 Camry in 2018 should be a part of a recall & not charged for Toyota’s defect with this being a WELL KNOWN issue.
- Engine · Structure › Body
My panoramic sunroof has a defect , my sunroof stopped working only a few months after having my car , I’ve Spoke with many other people with the same car and it’s common. I had a warranty on my car but they wouldn’t cover the cables for the setup to the roof , and it’s $10,000 at Toyota to get it…
My panoramic sunroof has a defect , my sunroof stopped working only a few months after having my car , I’ve Spoke with many other people with the same car and it’s common. I had a warranty on my car but they wouldn’t cover the cables for the setup to the roof , and it’s $10,000 at Toyota to get it fixed and I’m having transmission problems . I keep my maintenance up to date on my car , I’ve also done my research and transmission failure is also common on this vehicle ! My car is barely over 100,000 miles . I’m very disappointed in Toyota and I won’t be purchasing another ! Can honestly say this is the worse car I’ve had !
- Engine · Power train · Service brakes
After taking the car on a short drive: Pre-collision malfunction; parking brake malf; ICS malf; chk eng reduced power; secondary collision brake malf; rough idle and driving; sometimes won't accelerate (revs only); cruise control won't work; battery drained when off (12.5 v to 10.5 in one day; battery just under 3 years old); after replacing battery: OBD 2:P0302
- Power train
The vehicle has developed a high-pitched whine that is most noticeable around 30 to 55 mph. The pitch increases directly with vehicle speed, not engine RPM. The sound occurs whenever positive throttle is applied and disappears immediately when the accelerator is released, before vehicle speed…
The vehicle has developed a high-pitched whine that is most noticeable around 30 to 55 mph. The pitch increases directly with vehicle speed, not engine RPM. The sound occurs whenever positive throttle is applied and disappears immediately when the accelerator is released, before vehicle speed noticeably decreases. Gear changes do not appear to affect the pitch. I am concerned this may indicate a transmission/transaxle or final-drive problem. No warning lights are currently present.
- Power train
I own a 2018 Toyota Camry SE with approximately 120,000 miles. The vehicle is equipped with the 2.5L engine and 8-speed automatic transmission. I have recently developed a noticeable whining noise from the vehicle's drivetrain during acceleration. The noise is most noticeable at lower speeds…
I own a 2018 Toyota Camry SE with approximately 120,000 miles. The vehicle is equipped with the 2.5L engine and 8-speed automatic transmission. I have recently developed a noticeable whining noise from the vehicle's drivetrain during acceleration. The noise is most noticeable at lower speeds, approximately 10–60 mph, particularly when accelerating from a stop or at lower speeds. The noise becomes less noticeable or disappears when cruising at higher speeds. The noise is load-dependent. When I release the accelerator while traveling at approximately 30–40 mph and allow the vehicle to coast, the whining noise stops immediately. The noise does not occur when the vehicle is stationary and the engine is revved. I am concerned that this may indicate premature wear or a developing problem with the transmission or related drivetrain components. I am particularly concerned about the potential for progressive transmission failure while driving, which could result in loss of motive power and create a safety hazard. At this time, the vehicle remains drivable, but the noise appears to be abnormal and has raised concerns about the reliability and safety of the drivetrain. I am requesting that NHTSA document this complaint and investigate whether similar complaints involving 2017–2024 Toyota Camry vehicles with 8-speed automatic transmissions indicate a broader safety-related defect. I have not yet had the transmission replaced. I can provide additional information, service records, diagnostic results, photographs, or recordings of the noise if requested.
- Engine · Fuel/propulsion system
Reduce power and break power malfunction
- Power train
The transmission has begun failing, with less than 60,000 miles and a perfect maintenance record. While driving I noticed a "whine" while accelerating and it would go away when not pressing the accelerator. It also did not make the noise when in neutral. This is a known issue with the 2018 Toyota…
The transmission has begun failing, with less than 60,000 miles and a perfect maintenance record. While driving I noticed a "whine" while accelerating and it would go away when not pressing the accelerator. It also did not make the noise when in neutral. This is a known issue with the 2018 Toyota Camry and the manufacturer did not send out a notice, any type of additional support or maintenance recommendations to make customers aware.
- Electrical system
Hazard lights turn on by there self once turned off they will turn back on. When I try to use a turn signal the hazard lights will turn on instead of my turn signal
- Air bags › Srs malfunction warning lamp/light · Seat belts
The contact owns a 2018 Toyota Camry. The contact stated that while operating the vehicle, the message "SRS Airbag System Malfunction - Visit Your Dealer" was displayed on the instrument panel. Additionally, the passenger’s seat belt sensor light remained illuminated while the seat was unoccupied.…
The contact owns a 2018 Toyota Camry. The contact stated that while operating the vehicle, the message "SRS Airbag System Malfunction - Visit Your Dealer" was displayed on the instrument panel. Additionally, the passenger’s seat belt sensor light remained illuminated while the seat was unoccupied. The vehicle was not diagnosed or repaired. A dealer was contacted and provided an estimate for a diagnostic test. The manufacturer was not notified of the failure. The failure mileage was 128,000.
- Power train
My transmission is experiencing slipping, which causes the engine to rev up without delivering power to the wheels when I accelerate. This delay in gear engagement creates a high-safety risk during merges and passes because my vehicle cannot match traffic speeds predictably. Also, when pulling out…
My transmission is experiencing slipping, which causes the engine to rev up without delivering power to the wheels when I accelerate. This delay in gear engagement creates a high-safety risk during merges and passes because my vehicle cannot match traffic speeds predictably. Also, when pulling out onto a busy road I am not able to do it normally, I have to do it very slowly because it will miss and the engine revs up. This is a huge concern for all of us Toyota owners with this type of transmission. I see the history and issues have been know for quite sometime and Toyota has done nothing about it.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11011636OBSOLETE NOTICE November 05, 2024: This bulletin is now obsolete. Please see T-SB-0101-24.
- 11010368Some 2019 2022 model year Avalon and Avalon Hybrid, 2018 2024 model year Camry, and 2018 2025 model year Camry Hybrid vehicles may exhibit a condition in which the carpet underneath the door scuff plate becomes untucked and/or a carpet loop is torn. The condition(s) can occur on both the driver and front passenger sides of the vehicle. An improved floor mat No. 2 has been developed to reduce the likelihood of these conditions.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005145Some 2018 2019 model year Toyota Camry vehicles equipped with an A25A-FKS engine may exhibit reduced engine power and/or a MIL ON condition with one or more of the following throttle body Diagnostic Trouble Codes (DTCs) present in freezing temperatures: P210015: Throttle Actuator A Control Motor Circuit Short to Battery or Open. P210019: Throttle Actuator A Control Motor Circuit Current Above Threshold. P211172: Throttle Actuator A Control System Actuator Stuck Open. P01201C: Throttle / Pedal Position Sensor / Switch A Circuit Voltage Out of Range. The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of this condition. Follow the Repair Procedure in this bulletin to address this condition
- 11005123Some 2019 2022 model year Avalon and Avalon Hybrid and 2018 2024 model year Camry and Camry Hybrid vehicles may exhibit a condition in which the carpet underneath the door scuff plate becomes untucked or a carpet loop is torn. The condition(s) can occur on both the front driver and front passenger sides of the vehicles.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11005065Some 2019 2022 model year Avalon and Avalon Hybrid and 2018 2024 model year Camry and Camry Hybrid vehicles may exhibit a condition in which the carpet underneath the door scuff plate becomes untucked or a carpet loop is torn. The condition(s) can occur on both the front driver and front passenger sides of the vehicles.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003619Customers have expressed concerns about the performance of Qi Wireless Chargers. Wireless chargers on applicable vehicles are designed to work with Qi Certified devices only. MagSafe devices, that are not Qi Certified, may not charge as expected with Qi Wireless Chargers.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003564Customers have expressed concerns about the performance of Qi Wireless Chargers. Wireless chargers on applicable vehicles are designed to work with Qi Certified devices only. MagSafe devices, that are not Qi Certified, may not charge as expected with Qi Wireless Chargers.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10252262TSB: Some 2021 ? 2022 model year Avalon, 2018 ? 2024 Camry, and 2019 ? 2024 RAV4 vehicles with A25A-FKS engines may have a MIL ON condition with one or more of the following Diagnostic Trouble Codes (DTCs) upon cold soak start up with engine coolant temperatures between 14F ? 41F: ?P030027 ? Random/Multiple Cylinder Misfire Detected (Emission) Signal Rate of Change Above Threshold ?P030000 ? Random/Multiple Cylinder Misfire Detected ?P030100 ? Cylinder 1 Misfire Detected ?P030200 ? Cylinder 2 Misfire Detected ?P030300 ? Cylinder 3 Misfire Detected ?P030400 ? Cylinder 4 Misfire Detected Follow the Repair Procedure in this bulletin to address these conditions.
- 10252259TSB: Some 2018 ? 2022 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update, however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the expiration date of the dynamic subscription (stored in the head unit), must be checked. If the expiration date has not passed, a license key may be generated without the purchase of an Activation Card Number (ACN). Updating the map without the use of an ACN is considered an Embedded Navigation Update (refer to pg. 10) and performing this update does not extend the subscription to dynamic map services. If the subscription period has expired, or is expiring within the next 90 days, it should be recommended to the customer to purchase an ACN. Utilizing an ACN, will initiate the Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the embedded navigation update and provide dynamic map services for a period of two years from the date that the Dynamic Navigation Update is performed. ACNs are provided in a pamphlet available through the normal parts ordering system. Follow the process in this bulletin to perform the update.
- 10252251TSB: Some 2018 ? 2024 model year Toyota vehicles equipped with an A25A-FKS, A25A-FXS, M20A-FKS, or M20A-FXS engine may exhibit one or more of the following conditions: ?Milky/discolored engine oil. ?An ?Oil Pressure Low? warning message on the Multi-information Display (MID). ?A MIL ON condition with Diagnostic Trouble Codes (DTCs) P05202A (Engine Oil Pressure Sensor/Switch ?A? Signal Stuck in Range) and/or P052477 (Engine Oil Pressure Too Low [Severe]) present. Moisture from blow-by gases condenses and accumulates in the engine oil during short trips in extreme cold weather. When the moisture in the oil freezes, the oil pressure may drop, and the aforementioned warning indicators may display. Follow the procedures in this bulletin to address these conditions.
- 10249315OBSOLETE NOTICE December 04, 2023: This bulletin is now obsolete. Please see T-SB-0097-23.
- 10249312TSB: Some 2018 ? 2024 model year Camry and Camry Hybrid vehicles may exhibit the weatherstrip on the panoramic roof center glass peeling on the edges of the glass. Follow the Repair Procedure in this bulletin to address this condition.
- 10244115TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10244112OBSOLETE NOTICE August 17, 2023: This bulletin is no longer applicable and is now obsolete
- 10244111TT: A very small percentage of customers experience operational difficulties with some telematics features which they cannot resolve on their own. These resources, in conjunction with the Repair Manual, are for dealership personnel to assist those customers with user issues, user errors, and compatibility issues with other vehicle systems and external applications encountered while operating telematics features. Toyota has developed and provided the following Telematics Diagnostic Guide to assist dealer technicians.
- 10241382TSB: Some 2019 ? 2022 model year Avalon and Avalon Hybrid and 2018 ? 2023 model year Camry and Camry Hybrid vehicles may exhibit a condition in which the carpet underneath the door scuff plate becomes untucked or a carpet loop is torn. The condition(s) can occur on both the front driver and front passenger sides of the vehicles.
- 10240052TSB: Some 2019 ? 2022 model year Avalon and Avalon Hybrid and 2018 ? 2023 model year Camry and Camry Hybrid vehicles may exhibit a condition in which the carpet underneath the door scuff plate becomes untucked or a carpet loop is torn. The condition(s) can occur on both the front driver and front passenger sides of the vehicles
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
Every Toyota Camry model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.