2016 Toyota Camry
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Camry › 2016
These records cover every 2016 Toyota Camry. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
2 recalls name the 2016 Toyota Camry. Newest first.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2016 Toyota Camry and Highlander, 2015-2016 Toyota Tundra, Scion FR-S, and tC vehicles. The Load Carrying Capacity Modification Label may not reflect the correct added weight of the installed accessories. As a result, these vehicles fail to comply with the requirements of Federal…
Risk and remedy
Risk
An incorrect label may lead an owner to overload the vehicle, increasing the risk of a crash.
Remedy
SET will notify owners, and provide a corrected label for placement over the inaccurate label, free of charge. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2016 Avalon and Camry vehicles manufactured November 30, 2015 to March 4, 2016. The occupant classification system (OCS) that activates or deactivates the front passenger seat air bag system may have been improperly calibrated. As a result, the front passenger air bag and…
Risk and remedy
Risk
Air bags that do not deploy as intended during a crash increase the risk of injury.
Remedy
Toyota will notify owners, and dealers will recalibrate the OCS, free of charge. The recall began by May 13, 2016. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's number for this recall is G0J.
Owner complaints
184 complaints41 involved a crash2 involved a fire35 injuries
What owners report most
Latest complaints
- Engine
I own a 2016 Toyota Camry SE with the 2.5L 4-cylinder engine. The vehicle currently has approximately 155,000 miles and is experiencing excessive engine oil consumption. The engine requires oil to be added approximately every 800–1,000 miles despite regular maintenance and the use of…
I own a 2016 Toyota Camry SE with the 2.5L 4-cylinder engine. The vehicle currently has approximately 155,000 miles and is experiencing excessive engine oil consumption. The engine requires oil to be added approximately every 800–1,000 miles despite regular maintenance and the use of full-synthetic high-mileage motor oil. The spark plugs were also replaced approximately 20,000 miles ago. I am concerned that this level of oil consumption is excessive and could result in the engine operating with insufficient oil between normal service intervals, potentially causing engine damage or failure while the vehicle is being driven. I am aware that other owners of Toyota vehicles equipped with 2.5L engines have reported excessive oil consumption, including complaints involving the 2016 Camry. I am requesting that NHTSA document this issue and evaluate whether there is a pattern of excessive oil consumption affecting these vehicles. I have not received notice from Toyota of a recall or warranty enhancement covering excessive oil consumption on my vehicle.
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2016 Toyota Camry. It was discovered that there was a mileage discrepancy after the purchase. The vehicle was a private sale. At the time of purchase, the mileage was 163,000, and at the time of the registration, it was discovered that the mileage was 293,148.
- Air bags
The contact owns a 2016 Toyota Camry. The contact stated that while his daughter was driving the vehicle, the vehicle was involved in a front-end crash while making a left turn at an intersection. The air bags failed to deploy upon impact. The contact's daughter suffered bruising to the chest and…
The contact owns a 2016 Toyota Camry. The contact stated that while his daughter was driving the vehicle, the vehicle was involved in a front-end crash while making a left turn at an intersection. The air bags failed to deploy upon impact. The contact's daughter suffered bruising to the chest and stomach but had not yet sought medical attention. A Police report was not filed. The vehicle was towed to a storage facility and was waiting to be towed to another independent mechanic to be inspected. The failure mileage was approximately 120,000.
- Structure › Body
The factory-applied paint (Toyota color code 070, Blizzard Pearl) is delaminating and peeling off both the driver-side and passenger-side A-pillars, exposing primer underneath. The clear coat and color coat are separating from the substrate in sheets. This is not impact damage or external wear — it…
The factory-applied paint (Toyota color code 070, Blizzard Pearl) is delaminating and peeling off both the driver-side and passenger-side A-pillars, exposing primer underneath. The clear coat and color coat are separating from the substrate in sheets. This is not impact damage or external wear — it is a failure of paint adhesion. Toyota has acknowledged this defect in Customer Support Program ZKG, which covers 2008–2017 Camry vehicles finished in 070 Blizzard Pearl and 040 Super White. My vehicle is a 2016 Camry in 070. The program provides coverage for 10 years from date of first use. My in-service date was December 2015, so coverage expired in December 2025 — shortly before the defect progressed enough to require repair. The vehicle has been serviced at Toyota dealerships since delivery, with 25 documented service visits beginning with the pre-delivery inspection in October 2015. I contacted the selling brand's local dealer and the Toyota Brand Engagement Center. Both confirmed the vehicle is outside the 10-year window and declined repair. I am paying out of pocket. I am filing so this defect is recorded. The peeling is progressive and will expose bare metal on the A-pillar, which is part of the vehicle's roof-crush and rollover protection structure. In a road-salt environment this creates a corrosion risk on a structural member. No crash, fire, or injury has occurred.
- Structure › Body
1. Component / System Failed: - The primary exterior paint and clear coat layer completely separated from the factory electro-coat (E-coat) primer on the vehicle's body structure (specifically near the rear quarter panel, roof pillar, and doors). The vehicle and affected component are available for…
1. Component / System Failed: - The primary exterior paint and clear coat layer completely separated from the factory electro-coat (E-coat) primer on the vehicle's body structure (specifically near the rear quarter panel, roof pillar, and doors). The vehicle and affected component are available for inspection upon request. 2. Safety / Risk to Safety: - While driving at highway speeds (65+ mph), large, thick sheets of brittle paint layer detach and fly off the vehicle. This creates an unexpected road debris hazard for trailing motor vehicles, potentially causing driver distraction or windshield impact for vehicles behind me. Furthermore, large paint loss around the roof/windshield pillars creates noticeable glares and glare reflection in direct sunlight, compromising visual clarity. 3. Dealer / Professional Confirmation: - Yes. I brought the vehicle to a local Toyota dealership service center. The service department confirmed the paint detachment, noting it matches the known factory primer adhesion failure pattern addressed under Toyota Customer Support Program ZJB. However, they stated the extended program window had elapsed and refused coverage. 4. Prior Inspections: - The vehicle has been inspected by a Toyota dealership service department. It has not been inspected by police or insurance representatives as no collision has occurred yet. 5. Warning Lamps, Messages, or Prior Symptoms: - No dashboard warning lights or messages appeared prior to the failure, as this is a structural/body paint adhesion defect. The issue first appeared as minor blistering/bubbling along the panel edges without any external impact or stone chip damage, and rapidly progressed into large, multi-inch sections peeling off down to the bare grey primer.
- Electrical system · Steering
The vehicle touch screen stopped working. It doesn't allow the options to be chosen (radio, audio, and general settings) . The screen remains frozen. The estimated cost for repair is $2,000. The steering wheel vibrate and makes noises when vehicle speed is 40 or above. Diagnostic reports a steering column replacement. Estimated cost $ 800- 2,000
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2016 Toyota Camry. The vehicle was a private sale from Facebook Marketplace. The contact stated that after purchasing the vehicle, the vehicle experienced various mechanic failure. The vehicle was taken to an independent mechanic where it was discovered that…
Odometer Fraud. The contact purchased a 2016 Toyota Camry. The vehicle was a private sale from Facebook Marketplace. The contact stated that after purchasing the vehicle, the vehicle experienced various mechanic failure. The vehicle was taken to an independent mechanic where it was discovered that there was a mileage discrepancy. At the time of the purchase, the mileage was approximately 117,000; however, it was later discovered that the mileage was 257,080.
- Structure › Body › Trunk lid
The METAL trunk torsion bar broke with no warning or symptoms while I was sitting in my vehicle with the trunk closed. While it sounds minimal, it caused such a deafening sound I initially thought there had been an explosion in the rear of my vehicle. This occurred a few minutes after I removed…
The METAL trunk torsion bar broke with no warning or symptoms while I was sitting in my vehicle with the trunk closed. While it sounds minimal, it caused such a deafening sound I initially thought there had been an explosion in the rear of my vehicle. This occurred a few minutes after I removed an item from the trunk and closed the trunk. I was sitting in the driver's seat with the car running about to back up when the explosive sound occurred. If the trunk had still been open, the risk of significant injury and death would have been quite high given the explosive sound made when it broke and slammed the interior of the trunk. If it had hit my head, chest or an artery with that level of force, it likely would have caused death in my opinion. There were ZERO warnings. My trunk worked fine, no symptoms of any kind that it was about to fail and that is what makes this so dangerous. This is a part that never should have failed. It should last the lifetime of the car. The largest part of the broken torsion bar IS available for inspection. The smaller piece that broke off and became a potentially lethal projectile must be somewhere behind the paneling, but I have not been able to find it. I can make my car available if an inspector would like to search for the missing piece. I have received a quote from the dealer for replacement, so it has been inspected. Components that failed in the trunk: 64531-06500 Hinge Torsion Bar Right Hand 64127-06110 Torsion Bar Bracket/Hardware Kit. Rear Spoiler/Hardware Kit Note- There is also a 64532-06500 Hinge Torsion Bar Left Hand that could possibly fail in the same way.
- Structure › Body
Paint delamination. It's a known issue. Toyota extended warranty to cover but the local dealership who sold the car is no help. First noticed the paint pealing a few months ago. Started small now increasing significantly.
- Air bags
My daughter accidentally rear ended someone in her Toyota Camry. The damage to the front end was severe enough that the car has been totaled but the air bags did not deploy.
- Air bags
Airbags did not deploy after an accident that resulted in the hood crumpling. Car was at a complete stop when hit from behind at approximately 45mph, resulting in the car being pushed forward into the back of another vehicle.
- Vehicle speed control
Was gliding into my garage foot was on brake, (so no speed at all) when I heard a sudden engine roar and car picked up speed and was propelling me toward the back wall of the garage. I immediately jammed on my brake but was not able to stop before hitting racks and wall at the back of my garage. this acceleration of the car resulted in property damage to car and and property.
- Unknown or other
The driver door began to rattle when the door was closed or when driving down the road. I took it to my Toyota dealer and when they removed the door panel they found the intrusion bar's weld had failed. They confirmed it was a safety issue and referred me to their body shop. The body shop informed…
The driver door began to rattle when the door was closed or when driving down the road. I took it to my Toyota dealer and when they removed the door panel they found the intrusion bar's weld had failed. They confirmed it was a safety issue and referred me to their body shop. The body shop informed they are not allowed to reweld the bar and the only fix is to replace the door. This car has never been in an accident so my only conclusion is that when the car was manufactured the weld was improperly performed. I cannot afford to replace this door and I'm left to drive a car with no intrusion bar to protect me in an accident. I find this very concerning and this should not be something I should have to repair. In conclusion I believe this is Toyota manufacturing issue and they should be responsible for replacing this door which is endangering my safety as an owner and consumer. Thank you.
- Electrical system
The radio touchscreen does not work and the buttons on the steering wheel do not function as well. I am unable to touch the screen and the radio changes stations abruptly without me touching it. I am unable to listen to music or change the radio to Bluetooth to listen to my music on my phone.
- Electrical system · Unknown or other
Malfunction of connections to radio system. All buttons surrounding radio, including radio control buttons on steering wheel, do not function. The screen still turns on and displays the typical home screen but the screen does not function either leaving the radio system stuck on the home screen.…
Malfunction of connections to radio system. All buttons surrounding radio, including radio control buttons on steering wheel, do not function. The screen still turns on and displays the typical home screen but the screen does not function either leaving the radio system stuck on the home screen. Again , none of the buttons and/or screen functions work connected to the radio. The clock time is still displayed and will change but it is the wrong time but once again, cannot be changed because the functions surrounding the radio do not work.
- Seat belts › Rear/other › Retractor
The contact owns a 2016 Toyota Camry. The contact stated that the seat belts of the driver’s and passenger’s side rear seats failed to retract, causing concerns for the contact. There was no warning light illuminated. The vehicle was taken to a local dealer, where it was diagnosed, and the contact…
The contact owns a 2016 Toyota Camry. The contact stated that the seat belts of the driver’s and passenger’s side rear seats failed to retract, causing concerns for the contact. There was no warning light illuminated. The vehicle was taken to a local dealer, where it was diagnosed, and the contact was informed that the seat belt retractors were faulty and needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 132,393.
- Air bags
Car accident, got hit from the front and back. Car is totaled from the accident, airbags failed to deploy
- Engine · Exterior lighting · Visibility/wiper
The engine quit running whenever the headlights, turn signals, or wipers were turned on. This was obviously a serious safety problem when driving! It began intermittently on 6/30/25, but it became a consistent problem by 7/7/25, so I took the car to the closest Toyota Dealership for evaluation.…
The engine quit running whenever the headlights, turn signals, or wipers were turned on. This was obviously a serious safety problem when driving! It began intermittently on 6/30/25, but it became a consistent problem by 7/7/25, so I took the car to the closest Toyota Dealership for evaluation. I can provide their service report to you if requested. It took them 6 hours and $1000 to diagnose the problem as bad electrical grounding points (high resistance), which were only revealed after they removed the front bumper. In my opinion, it is an unsafe design to have poor grounding for headlights cause the engine to die.
- Unknown or other
the engine pull broke. the mechanics told me it’s a common issue with toyota so why is there not a recall. it causes the car to stall and today it would not go forward. this is safety issue if it happens while i’m driving
- Power train
I have a 2016 Toyota Camry LE and I'm having problems with the shaft and that is dangerous. I see that other Camry's are having the same problem as my car is. I think this problem need to be reported as a recall.
- Electrical system
Radio stopped working
- Engine · Power train
Subject: Investigation Request: Excessive Oil Consumption in 2012-2017 Toyota 2.5L Engines To Whom It May Concern, I am writing to request an investigation into a critical defect with Toyota’s 2.5L 4-cylinder engines in 2012-2017 vehicles, including my 2016 Toyota Camry SE. Despite regular…
Subject: Investigation Request: Excessive Oil Consumption in 2012-2017 Toyota 2.5L Engines To Whom It May Concern, I am writing to request an investigation into a critical defect with Toyota’s 2.5L 4-cylinder engines in 2012-2017 vehicles, including my 2016 Toyota Camry SE. Despite regular maintenance and timely oil changes, my vehicle began consuming oil excessively around 120,000 miles, leading to significant safety risks. The problem began with sluggish acceleration and grinding noises, both hazardous in city traffic. After hearing grinding noises, I checked the oil level, and the dipstick was completely dry, despite still having 3,000 miles until my next scheduled oil change. The engine was consuming one quart of oil per week under normal driving conditions. Despite multiple visits to Toyota-certified dealerships, the issue was overlooked or minimized. Eventually, a dealership diagnosed worn piston rings, but by 130,000 miles, my engine had completely failed. I’m thankful [XXX] that my engine never quit while I was driving at highway speeds or in city traffic, as it could have been a serious accident. This issue is well-documented among owners of 2015-2017 Toyota Camrys and other models equipped with the same engine, even when vehicles are properly maintained. This defect not only threatens engine reliability but also endangers drivers by causing performance failures, such as grinding noises, sluggish acceleration, and unexpected power loss. Toyota has issued recalls for similar engine defects in other vehicles but has failed to address this issue for the 2.5L 4-cylinder engines in the 2012-2017 models. I urge the NHTSA to investigate this widespread issue and hold Toyota accountable for ensuring the safety and reliability of these vehicles. Many drivers, including myself, are at risk without proper action. Thank you for addressing this pressing matter. Sincerely, [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Latches/locks/linkages › Trunk lid › Latch · Structure › Body › Trunk lid
While loading groceries in my trunk, the torsion bar sheared off and broke (the hook part). It fell hard on my shoulder (fortunately not my neck or head). I have never seen steel actually break rather than bend. I tried to fix it but could not. Trunk is heavy and unstable (falls easily), as is…
While loading groceries in my trunk, the torsion bar sheared off and broke (the hook part). It fell hard on my shoulder (fortunately not my neck or head). I have never seen steel actually break rather than bend. I tried to fix it but could not. Trunk is heavy and unstable (falls easily), as is part of car in back. Went to Toyota dealer and found out no recall, and "iffy" fix. They wanted $488.50 to try and fix. My body shop estimated $164. and purchased correct Toyota parts, followed their instructions. The bars only held for a few minutes, then they failed to hold up the trunk again. I was almost injured again with this failure, but managed to catch it in time. They refunded me $100. since they said there was no more "play" to work with. Went on social media only to find that many Toyota Camry 2016 and 2015s had torsion bar failures, with no recall. Some said that they spent over $1000. trying to fix it, but never could, no matter what dealership or body shop repaired it. Others gave up and sold it. It is not something that I can "live with". the trunk is heavy to life and unstable. Have to hold it while trying to put things in trunk. I have had 6 Toyotas in my life and 3 cars with Auto Nation, but have never had the lack of integrity, follow-through and non-solutions that I have experienced with the purchase of this car. Unlike others, I can't afford to sell/replace my car at this time, and can't live with it as is. I truly love my car, but do not feel safe using it and am totally frustrated. All I want is for Toyota and/or its mfr.) to own up to the design flaw and either fix or replace it. Note: I have photos of broken part, failure, and estimates, but couldn't get them to download onto your form. (It just kept deleting the form and having me start over). Please advise if I can send another way.
- Unknown or other
The car is beige and peeling everywhere. I know there is a recall for paint for white and Blizzard, but its doing the same for the beige color. I would like it repainted.
- Unknown or other
Radio screen failure.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003619Customers have expressed concerns about the performance of Qi Wireless Chargers. Wireless chargers on applicable vehicles are designed to work with Qi Certified devices only. MagSafe devices, that are not Qi Certified, may not charge as expected with Qi Wireless Chargers.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003564Customers have expressed concerns about the performance of Qi Wireless Chargers. Wireless chargers on applicable vehicles are designed to work with Qi Certified devices only. MagSafe devices, that are not Qi Certified, may not charge as expected with Qi Wireless Chargers.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244115TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10230369DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10230368DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10230367DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
- 10227920DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10227919DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10227918DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
- 10227916DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
- 10227915TI: TECHNICAL INSTRUCTIONS Customer Support Program ZKG Multiple Models and Model Years Vehicles Painted with Blizzard Pearl (070) or Super White (040) Paint Color Coverage for Peeling of Factory-Applied Paint
- 10227914CSP: Customer Support Program ZKG ? Paint Repair Process
- 10227913DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
- 10227912DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10224108TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
Every Toyota Camry model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.