2009 Toyota Camry
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Camry › 2009
These records cover every 2009 Toyota Camry. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
10 recalls name the 2009 Toyota Camry. Newest first.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010…
Risk and remedy
Risk
If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
Remedy
SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
Toyota Motor Company (Toyota) is recalling certain model year 2009-2011 Tundra, Sequoia, Corolla, Corolla Matrix and Scion xB, 2008-2011 Highlander and Highlander Hybrid, 2007 Camry and Camry Hybrid, 2009 Camry and Camry Hybrid, 2006-2011 RAV4, 2006-2010 Yaris, and 2009-2010 Scion xD and Pontiac Vibe vehicles. During the manufacturing of the Power Window…
Risk and remedy
Risk
If the sliding electrical contacts are not protected by lubricant, debris and moisture that get into the switch may cause a short circuit and the switch assembly may overheat and melt, increasing the risk of a fire.
Remedy
Toyota will notify owners, and dealers will inspect the switch, applying a lubricant if no abnormality is found. If abnormality is found, the PWMS circuit board will be replaced, free of charge. The recall is expected to begin December 20, 2015. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is C0M.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion…
Risk and remedy
Risk
Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
Remedy
SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.
Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013…
Risk and remedy
Risk
If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. This could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.
Remedy
Southeast Toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on March 21, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Toyota is recalling certain model year 2007-2009 Camry, Camry Hybrid, RAV4, Corolla, Corolla Matrix, Tundra, Sequoia, Highlander, Highlander Hybrid, Yaris, Scion xB, Scion xD and Pontiac Vibe vehicles. The power window master switch assemblies in some of these vehicles were built using a less precise process for lubricating the internal components of the…
Risk and remedy
Risk
If the switch overheats, it may melt, possibly resulting in a fire.
Remedy
Toyota will notify its owners, and dealers will inspect the switch and apply a special grease that inhibits heat build up or replace any switch damaged by the defect, free of charge. Toyota owners that experience a problem with a switch should not attempt to make repairs, but should contact their Toyota dealer or the Toyota Customer Experience Center at 1-800-331-4331. General Motors will contact the Pontiac Vibe owners affected by this recall and GM dealers will inspect and repair switches as necessary. Those owners may contact Pontiac Customer Care at 1-800-762-2737.
Toyota IS recalling certain model year 2009 camry vehicles manufactured from july 1, 2008, through february 28, 2009, and model year 2009-2011 venza vehicles manufactured from october 20, 2008, through january 4, 2011. during assembly of the contact-type stop lamp switch, silicone grease may have come in contact with the surface of the switch which could…
Risk and remedy
Risk
Inoperative brake lights would not warn other drivers that the vehicle IS slowing or stopping, increasing the risk of a crash.
Remedy
Toyota will notify owners, and dealers will replace the stop lamp switch, free of charge. the safety recall began on april 12, 2012. owners may contact toyota at 1-800-331-4331.
Gulf states toyota IS recalling certain model year 2005-2010 vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold between september 1, 2005 and june 2, 2008 without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
This does not meet the standard requirements.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. Dealers will also correct the owner's manual. the safety recall began on may 27, 2010. owners may contact gulf states toyota at 713-580-3300.
Southeast toyota IS recalling certain model year 2005-2011 passenger vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
A driver may overload a vehicle which may increase the risk of a crash.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. the safety recall began on may 27, 2010. owners may contact southeast toyota at 1-800-301-6859.
Toyota IS recalling certain model year 2005-2010 avalon, model year 2007-2010 camry, model year 2009-2010 corolla, corolla matrix, RAV4, model year 2010 highlander, model year 2008-2010 sequoia, and model year 2007-2010 tundra vehicles. due to the manner in which the friction lever interacts with the sliding surface of the accelerator pedal inside the…
Risk and remedy
Risk
The accelerator pedal may become hard to depress, slow to return to idle, or, in the worst case, mechanically stuck in a partially depressed position, increasing the risk of a crash.
Remedy
Dealers will install a reinforcement bar in the accelerator pedal which will allow the pedal to operate smoothly. gm will notify owners for the pontiac vibe please see 10v-018. this service will be performed free of charge. the safety recall IS expected to begin on february 5, 2010 and will be completed on march 15, 2010. owners may contact toyota at 1-800-331-4331.
Toyota IS recalling certain model year 2004-2010 passenger vehicles. the accelerator pedal can get stuck in the wide open position due to its being trapped by an unsecured or incompatible driver's floor mat.
Risk and remedy
Risk
A stuck open accelerator pedal may result in very high vehicle speeds and make it difficult to stop the vehicle, which could cause a crash, serious injury or death.
Remedy
Toyota filed an amended defect report on november 25, 2009, stating that dealers will modify the accelerator pedal and, on certain vehicles, alter the shape of the floor surface under the pedal. these changes address the risk of pedal entrapment due to interference with the floor mat. redesigned accelerator pedals will become available beginning in april 2010 and dealers will replace any modified pedal with the new pedal if desired. also, dealers will replace any genuine toyota or lexus all-weather floor mats with redesigned all-weather mats, or repurchase the previous mats from owners who do not want the new ones. additionally, software modifications will be installed on camry, avalon and lexus ES 350, IS 350 and IS 250 models that will ensure that the brake overrides the accelerator in the event both brake and accelerator pedals are applied. toyota will begin mailing letters to owners on december 31, 2009. owners may contact toyota at 1-800-331-4331, lexus at 1-800-255-3987.
Owner complaints
1,294 complaints151 involved a crash19 involved a fire86 injuries2 deaths
What owners report most
Latest complaints
- Structure › Body
Component or System Failed: Unibody structural frame / Front chassis suspension and crumple zone architecture. Description of the Incident and Safety Risk: A structural repair was executed on this vehicle involving an improper "rough pull" on a frame rack/jig rather than replacing the compromised…
Component or System Failed: Unibody structural frame / Front chassis suspension and crumple zone architecture. Description of the Incident and Safety Risk: A structural repair was executed on this vehicle involving an improper "rough pull" on a frame rack/jig rather than replacing the compromised structural components to OEM specification. The auto body facility failed to restore the vehicle's unibody structural integrity. Misaligned body lines and underlying unibody damage remain uncorrected, severely degrading the vehicle's engineered crumple zones. This creates an immediate, severe safety risk. Because the high-strength steel and structural collision-energy management features have been altered and weakened without proper sectioning or component replacement, the vehicle's structural performance in a subsequent impact is entirely compromised. This significantly elevates the risk of severe cabin intrusion and catastrophic structural failure in a future accident, endangering the safety of all occupants. Confirmation and Documentation: The underlying structural and unibody deficiencies have been identified and documented via visual inspection, initial estimates, subsequent supplement records, and detailed parts lists
- Electrical system
I'm not even sure this is the right form for this complaint, but it has to do with non-compliance from Toyota. It's the master window switch recall 12V491. I had to schedule 2 separate appointments for this vehicle at Florence Toyota (Florence, SC), only to have them tell me the first time that…
I'm not even sure this is the right form for this complaint, but it has to do with non-compliance from Toyota. It's the master window switch recall 12V491. I had to schedule 2 separate appointments for this vehicle at Florence Toyota (Florence, SC), only to have them tell me the first time that they didn't have the part, and the second time that it wasn't covered under "warranty" due to the vehicle having been issued a salvage title. This isn't a warranty issue, rather a safety recall that should be addressed and fully reimbursed by Toyota anyway, so I don't understand the problem? Nothing has happened with the switch, thankfully, in all these years. But they keep sending regular alerts that the recall was issued and that I should make an appointment to have it remedied at no cost.
- Engine · Power train
The contact owns a 2009 Toyota Camry. The contact stated that the vehicle jerked while accelerating from a complete stop. Additionally, the vehicle intermittently failed to start, with the ABS warning light displayed on the instrument panel. The vehicle was towed to an independent mechanic for…
The contact owns a 2009 Toyota Camry. The contact stated that the vehicle jerked while accelerating from a complete stop. Additionally, the vehicle intermittently failed to start, with the ABS warning light displayed on the instrument panel. The vehicle was towed to an independent mechanic for repairs, but the failure reoccurred shortly after the repair. The contact stated that while attempting to shift into drive(D), the transmission remained stuck in neutral(N) with the check engine warning light illuminated. The contact stated that the vehicle rolled forward while the vehicle was parked, turned off, with the parking brake engaged. The contact placed trash bins in front of the vehicle to prevent the vehicle from rolling. The manufacturer was not notified of the failure, and the vehicle remained unrepaired. The failure mileage was 127,990.
- Structure › Interior panels › Dashboard
The contact owns a 2009 Toyota Camry. The contact stated that on several occasions while driving at various speeds, there was a glare coming from the dashboard, making it difficult to see out the windshield while driving. The contact stated that the dashboard was sticky to the touch and sunglasses…
The contact owns a 2009 Toyota Camry. The contact stated that on several occasions while driving at various speeds, there was a glare coming from the dashboard, making it difficult to see out the windshield while driving. The contact stated that the dashboard was sticky to the touch and sunglasses were needed while driving the vehicle. The vehicle was taken to a dealer where it was determined that the dashboard needed to be replaced. The vehicle was not repaired. The vehicle was taken to the same dealer for maintenance, and the contact inquired if there was a recall associated with the failure. The manufacturer was notified of the failure. The failure mileage was approximately 116,995.
- Structure › Interior panels › Dashboard
The contact owns a 2009 Toyota Camry. The contact stated that while driving at an undisclosed speed, the glare from the melted dashboard impaired visibility while driving. The contact stated that the glare from the melted dashboard was reflecting onto the front windshield. The vehicle was taken to…
The contact owns a 2009 Toyota Camry. The contact stated that while driving at an undisclosed speed, the glare from the melted dashboard impaired visibility while driving. The contact stated that the glare from the melted dashboard was reflecting onto the front windshield. The vehicle was taken to the dealer; however, the vehicle was not inspected. The contact was informed that the repair was not covered under the recall. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact stated that the failure was a known failure. The manufacturer was made aware of the failure but provided no assistance. The failure mileage was approximately 79,000.
- Unknown or other
The HV battery cooling fan on the 2009 Toyota Camry Hybrid has no protective filter and no cleaning or inspection interval in Toyota’s published Scheduled Maintenance Guide. Toyota acknowledged this exact problem in TSB T-SB-0087-13 (July 2013) for 2012–2016 Camry HV vehicles, stating the cooling…
The HV battery cooling fan on the 2009 Toyota Camry Hybrid has no protective filter and no cleaning or inspection interval in Toyota’s published Scheduled Maintenance Guide. Toyota acknowledged this exact problem in TSB T-SB-0087-13 (July 2013) for 2012–2016 Camry HV vehicles, stating the cooling fan ‘may exhibit an excessive buildup of dust, lint, or other debris that can reduce the efficiency of the HV Battery Cooling System.’ However, Toyota excluded the 2007–2011 generation — which has the same unfiltered cooling fan design — from this TSB. My 2009 Camry Hybrid (VIN: [XXX] , 208,000 miles) has now failed with code P0A80, requiring full battery replacement. The failure is consistent with the cooling fan clogging defect Toyota acknowledged for later model years but never addressed for this generation. I am requesting NHTSA investigate whether Toyota should extend TSB T-SB-0087-13 or issue a recall covering the 2007–2011 Camry Hybrid. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Seats
While driving my seat squeaks as if the bolts are loose.
- Engine · Structure › Body · Unknown or other
Excessive oil consumption, a sticky dash and power window switch
- Structure › Interior panels › Dashboard
The contact owns a 2009 Toyota Camry. The contact stated that the dashboard was sticky, causing a shiny glare on the windshield, preventing the driver from seeing through the windshield. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was made aware of the failure. The failure mileage was approximately 60,000.
- Air bags
The contact owned a 2009 Toyota Camry. The contact stated that while her daughter was driving at approximately 40 MPH, another vehicle ran a stop sign and collided with the drivers front side of the vehicle and the air bags did not deploy as intended. The contact's daughter sustained chest, knee…
The contact owned a 2009 Toyota Camry. The contact stated that while her daughter was driving at approximately 40 MPH, another vehicle ran a stop sign and collided with the drivers front side of the vehicle and the air bags did not deploy as intended. The contact's daughter sustained chest, knee, and right wrist injuries, and she received medical attention. The contact added that the driver's door was not able to open fully after the collision. The fire department arrived, and a police report was filed, but the report number was not available at this time. The vehicle was towed to an impound lot, where it was later deemed totaled. The manufacturer was notified of the failure, and a complaint was filed. In addition, the contact was told that they could not determine what caused the failure. The failure mileage was approximately 200,000.
- Unknown or other
I drove my son’s 2009 Toyota Camry recently and encountered a serious safety concern. When driving into direct sunlight, visibility was significantly impaired due to intense glare reflecting off the dashboard and onto the windshield. The reflection made it difficult to clearly see the road ahead.…
I drove my son’s 2009 Toyota Camry recently and encountered a serious safety concern. When driving into direct sunlight, visibility was significantly impaired due to intense glare reflecting off the dashboard and onto the windshield. The reflection made it difficult to clearly see the road ahead. This is not a cleaning or maintenance issue. The dashboard surface is no longer matte as designed. It has become glossy and reflective due to the well-documented Toyota “melting” or “sticky” dashboard defect that affected many 2009-era Toyota and Lexus vehicles. As the dashboard material degrades, it creates a reflective surface that directly contributes to dangerous glare while driving. This condition presents a genuine safety risk, particularly during sunrise and sunset, when glare is already a known driving hazard. Unfortunately, I understand that Toyota’s warranty enhancement program for this issue has expired, despite the defect continuing to pose a safety concern. I wanted to formally document this issue as a visibility and safety hazard and request guidance on whether Toyota will address this condition given its direct impact on safe vehicle operation.
- Air bags
The vehicle was involved in a rollover crash at 60 mph that ended in striking a tree, which intruded upon the entire backseat area. The driver/passenger airbag(s) did not deploy despite conditions where deployment should have occurred. There were no signs of prior deployment or tampering: to my…
The vehicle was involved in a rollover crash at 60 mph that ended in striking a tree, which intruded upon the entire backseat area. The driver/passenger airbag(s) did not deploy despite conditions where deployment should have occurred. There were no signs of prior deployment or tampering: to my knowledge, the airbag system had not previously deployed or been serviced for that. The airbag system is available for inspection, as the vehicle was sold to the insurance company. My safety was put at risk as I sustained physical injuries that may have been prevented by airbag deployment. The vehicle was inspected by insurance representatives. There were no prior warning lamps regarding the airbags prior to the crash.
- Unknown or other
The dashboard has turned into a sticky residue that reflects a blinding glair and is hazardous to see & drive. Toyota has declined to extend the recall warranty to replace the dash even though this is a hazard and has nearly caused accidents. Please help me get Toyota to make good on replacing.
- Unknown or other
My son wrecked cause of the stickiness of the dashboard the light reflected and he was in an accident . You guys mailed the safest notice to his grandmother at a assisted living facility and I have proof she didn’t get mail there so my son shouldn’t have to suffer we have already put a new motor in it and can’t deive
- Lane departure › Blind spot detection · Unknown or other
My grandma bought a 2009 Toyota Camry well kept she passed away in 2019 and she gave me the car what I read second owner has a 10 warranty they said there was a safety recall on the dashboard she was in a nursing home facility and that where her mail went and she was Bedfast and we have proof of…
My grandma bought a 2009 Toyota Camry well kept she passed away in 2019 and she gave me the car what I read second owner has a 10 warranty they said there was a safety recall on the dashboard she was in a nursing home facility and that where her mail went and she was Bedfast and we have proof of that the dashboard is so sticky there is so much glare from it I’ve wrecked and I know the time frame has past but I read the owner had 10 years it is such a great car but I can’t drive it please help me I can provide proof of everything but I’m scared I will get killed
- Structure › Interior panels › Dashboard
The contact owns a 2009 Toyota Camry. The contact stated that the dashboard was sticky and melting. The contact stated that since moving to the desert, the dashboard coating had degraded and deteriorated. The shine created a glare on the windshield, preventing the contact from driving at night. The…
The contact owns a 2009 Toyota Camry. The contact stated that the dashboard was sticky and melting. The contact stated that since moving to the desert, the dashboard coating had degraded and deteriorated. The shine created a glare on the windshield, preventing the contact from driving at night. The vehicle was taken to the dealer. The contact was informed that it was an aesthetic issue, and the Customer Support Program warranty period had ended. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was unknown.
- Visibility/wiper
I purchased a 2009 Toyota Camry on [XXX]. After a few years, the dashboard became soft and sticky. During the summer of 2018, I noticed it melting on a hot sunny day. I looked into having it replaced. There was a warranty enhancement notification letter previously sent to me, which stated this type…
I purchased a 2009 Toyota Camry on [XXX]. After a few years, the dashboard became soft and sticky. During the summer of 2018, I noticed it melting on a hot sunny day. I looked into having it replaced. There was a warranty enhancement notification letter previously sent to me, which stated this type of known problem would be covered for up to 10 years since car was first placed in service. Unfortunately, I didn’t determine this was enough of a problem to me until [XXX]. I missed the warranty extension by 5 days. I contacted Newbold Toyota on June 29, 2018, and the service manager said that after the 10 years, it was the manufacturer's responsibility and there is nothing they can do, except to charge me for the repair. The repair was estimated at approx. $1,500 for the dashboard replacement. At first, I thought "Oh well, I can live with this." But now the dashboard has melted so much that it now reflects sunlight into the windshield so badly that it is has become a safety hazard. It is very difficult to see through the windshield when driving towards the sun or with the sun directly above on a sunny day (even while wearing sunglasses). So the defective dashboard is now causing a very hazardous driving condition. So I contacted the national Toyota Customer Service Center, and they said essentially the same thing as Newbold Toyota. There was nothing they can do now. Since this design/material flaw has caused such a serious hazard when driving the car, and this is now a safety issue, I believe Toyota should be held responsible and should pay for the repair to fix this safety issue. When I purchased this car, I had no idea the dashboard had an expiration date. Had I noticed the melting a few days earlier they would have paid for the replacement. So why does their responsibility to fix this defect/safety issue end after 10 years? I don’t believe Toyota considers this a safety issue, or I believe they would fix it. Thank you. [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U
- Engine
The contact owns a 2009 Toyota Camry. The contact stated that while his daughter was driving, the "Check Oil" warning light illuminated. The contact added oil to the engine. The contact was informed that the check oil warning light was illuminated. The contact took the vehicle to the dealer where…
The contact owns a 2009 Toyota Camry. The contact stated that while his daughter was driving, the "Check Oil" warning light illuminated. The contact added oil to the engine. The contact was informed that the check oil warning light was illuminated. The contact took the vehicle to the dealer where an oil consumption test was performed. The dealer diagnosed the vehicle and determined that the engine was consuming an excessive amount of engine oil. The contact was adding several quarts of oil every 1,000 miles driven. The vehicle was not repaired due to cost. The manufacturer was made aware of the failure and informed the contact that the Extended Warranty had been exceeded. The failure mileage was approximately 137,000.
- Structure › Interior panels › Dashboard
The contact owns a 2009 Toyota Camry. The contact stated while driving at an undisclosed speed, the reflection from the melted dashboard impaired his view while driving. The contact stated that the dashboard was sticky and shiny and reflected on the windshield while driving. The vehicle was not…
The contact owns a 2009 Toyota Camry. The contact stated while driving at an undisclosed speed, the reflection from the melted dashboard impaired his view while driving. The contact stated that the dashboard was sticky and shiny and reflected on the windshield while driving. The vehicle was not diagnosed or repaired by an independent mechanic or the dealer. The manufacturer was made aware of the failure but provided no assistance. The contact was informed that the Extended Warranty coverage on the vehicle had expired. The failure mileage was approximately 60,000.
- Engine
The engine burned excessive oil and finally the rings and head gasket failed causing the engine to misfire and finally break down at 186,000 miles.
- Structure › Body
The contact owns a 2009 Toyota Camry. The contact stated that the dashboard had started to fracture in several places. The dealer was contacted, and an appointment was scheduled; however, the vehicle had not been taken to the dealer. The vehicle was not repaired. The manufacturer was made aware of…
The contact owns a 2009 Toyota Camry. The contact stated that the dashboard had started to fracture in several places. The dealer was contacted, and an appointment was scheduled; however, the vehicle had not been taken to the dealer. The vehicle was not repaired. The manufacturer was made aware of the failure and opened a case for the failure. The manufacturer referred the contact to the NHTSA Hotline to report the failure. The failure mileage was 20,000. The VIN was not available.
- Engine
I have 2009 Toyota Camry LE, the problem is engine oil, if I changed/filled the engine oil in certified stores, but after 400 miles the engine oil is not in the engine chamber I checked the leaks or any other sort of damage but there's nothing like that I verified the same thing with the dealership…
I have 2009 Toyota Camry LE, the problem is engine oil, if I changed/filled the engine oil in certified stores, but after 400 miles the engine oil is not in the engine chamber I checked the leaks or any other sort of damage but there's nothing like that I verified the same thing with the dealership too. Basically my point is due to extensive consumption of engine oil the engine will brake in the middle of driving and there are chances it will explode and there's a DANGER while driving the car it's like pulled the granite pin and sit above it. And due to this the braking system will fail and the person loose his life and the dependses will be suffered a lot. Please look at this issue. Thank you.
- Engine · Service brakes · Steering
I have 2009 Toyota Camry LE, the problem is engine oil, if I changed/filled the engine oil in certified stores, but after 400 miles the engine oil is not in the engine chamber I checked the leaks or any other sort of damage but there's nothing like that I verified the same thing with the dealership…
I have 2009 Toyota Camry LE, the problem is engine oil, if I changed/filled the engine oil in certified stores, but after 400 miles the engine oil is not in the engine chamber I checked the leaks or any other sort of damage but there's nothing like that I verified the same thing with the dealership too. Basically my point is due to extensive consumption of engine oil the engine will brake in the middle of driving and there are chances it will explode and there's a DANGER while driving the car it's like pulled the granite pin and sit above it. And due to this the braking system will fail and the person loose his life and the dependses will be suffered a lot. Please look at this issue. Thank you.
- Unknown or other
Dashboard Melted. Causes a glare and tacky texture. The dash board emits a chemical smell in the car
- Visibility/wiper
The replaced dashboard ( the first dashboard was replaced due to a recall about melting dashboards) is now melting just like the first one and is causing significant glare in on the windshield. Avoided two (2) near accidents when the glare from the sun impaired my vision of the traffic in front of me.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Power Window Master Switch Fire
On October 10, 2012, Toyota initiated a safety recall of approximately 2.5 million U.S. vehicles involving the following models and model years:2007-2009 Camry and Camry Hybrid, 2009 Corolla and Corolla Matrix, 2008 Highlander and Highlander Hybrid, 2007-2009 RAV4, 2008-2009 Scion xB and xD, 2008-2009 Sequoia…
On October 10, 2012, Toyota initiated a safety recall of approximately 2.5 million U.S. vehicles involving the following models and model years:2007-2009 Camry and Camry Hybrid, 2009 Corolla and Corolla Matrix, 2008 Highlander and Highlander Hybrid, 2007-2009 RAV4, 2008-2009 Scion xB and xD, 2008-2009 Sequoia, 2007-2008 Tundra, 2007-2008 Yaris, and 2009 Pontiac Vibe.See NHTSA recall number 12V-491 for more details, including the affected vehicle manufacture dates for each vehicle model.Note that only early-production 2009 model year vehicles are included in the recall.Toyota and GM dealers will inspect the power window master switch (PWMS) assemblies and apply a specialized grease that inhibits heat build-up.The circuit board in the PWMS may be replaced with a new one if notchy or sticking feeling is observed during the inspection.The failure report summary above shows counts for the vehicles identified at the start of this Engineering Analysis, specifically the approximately 1.4 million vehicles that share an identical PWMS assembly design including, model year 2007-2009 Camry, Camry Hybrid, RAV4, and Yaris built from September 2006 through August 2008, as well as all 2008 Highlander Hybrid.Toyota subsequently identified approximately one million additional vehicles that have a slightly different PWMS design but contain the same defect condition.Note that the totals for complaints and fires shown above may include duplicative reports (between ODI and manufacturer reports).This Engineering Analysis is closed.See attached report for additional information.The ODI reports cited above can be viewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10323848, 10360414, 10392622, 10394453, 10411328, 10429983, 10436663, 10446699, 10447416, 10447417, 10447419, 10447444, 10447515, 10447845, 10447947, 10449270, 10450133, 10450568, 10450606, 10450641, 10451821, 10455540, 10455614, 10456353, 10456438, 10457854, 10457955, 10459730, 10460166, 10460691, 10461220, 10462140, 10462200, 10462247, 10462404, 10462705, 10462761, 10464451, 10464769, 10465421, 10466279, 10466667, 10468126, 10468265, 10475230, 10470313, 10470684, 10471551, 10471824, 10472336, 10472910, 10473753, 10473967, 10473969, 10476921, 10477469, 10478563 and 10478657.
- Power Window Master Switch Fire
ODI has identified certain Toyota vehicles experiencing a higher rate of fire and thermal event incidents among all Toyota vehicles that use the same power window master switch design.They include a total of approximately 1.4 million model year (MY) 2007 through 2009 Camry, Camry Hybrid, RAV4 and Yaris vehicles built…
ODI has identified certain Toyota vehicles experiencing a higher rate of fire and thermal event incidents among all Toyota vehicles that use the same power window master switch design.They include a total of approximately 1.4 million model year (MY) 2007 through 2009 Camry, Camry Hybrid, RAV4 and Yaris vehicles built from approximately September 2006 through August 2008, as well as all MY 2008 Highlander Hybrid vehicles.This Preliminary Evaluation has been upgraded to an Engineering Analysis (EA12-006) to further study the alleged defect and its consequences.The ODI reports cited above can be viewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10461220, 10460691, 10460166, 10459730, 10457955, 10457854, 10456438, 10456353, 10455614, 10455540, 10451821, 10450641, 10450606, 10450568, 10450133, 10449270, 10447947, 10447845, 10447515, 10447444, 10447419, 10447417, 10447416, 10446699, 10436663, 10429983, 10411328, 10407290, 10394453, 10392622, 10360414, 10323848.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10230369DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10230368DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10230367DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
- 10227920DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10227919DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10227918DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
- 10227916DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
- 10227915TI: TECHNICAL INSTRUCTIONS Customer Support Program ZKG Multiple Models and Model Years Vehicles Painted with Blizzard Pearl (070) or Super White (040) Paint Color Coverage for Peeling of Factory-Applied Paint
- 10227914CSP: Customer Support Program ZKG ? Paint Repair Process
- 10227913DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
- 10227912DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10220158DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10211828DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
Every Toyota Camry model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.