2007 Toyota Camry
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Camry › 2007
These records cover every 2007 Toyota Camry. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
10 recalls name the 2007 Toyota Camry. Newest first.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010…
Risk and remedy
Risk
If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
Remedy
SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
Toyota Motor Company (Toyota) is recalling certain model year 2009-2011 Tundra, Sequoia, Corolla, Corolla Matrix and Scion xB, 2008-2011 Highlander and Highlander Hybrid, 2007 Camry and Camry Hybrid, 2009 Camry and Camry Hybrid, 2006-2011 RAV4, 2006-2010 Yaris, and 2009-2010 Scion xD and Pontiac Vibe vehicles. During the manufacturing of the Power Window…
Risk and remedy
Risk
If the sliding electrical contacts are not protected by lubricant, debris and moisture that get into the switch may cause a short circuit and the switch assembly may overheat and melt, increasing the risk of a fire.
Remedy
Toyota will notify owners, and dealers will inspect the switch, applying a lubricant if no abnormality is found. If abnormality is found, the PWMS circuit board will be replaced, free of charge. The recall is expected to begin December 20, 2015. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is C0M.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion…
Risk and remedy
Risk
Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
Remedy
SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.
Toyota is recalling certain model year 2007-2009 Camry, Camry Hybrid, RAV4, Corolla, Corolla Matrix, Tundra, Sequoia, Highlander, Highlander Hybrid, Yaris, Scion xB, Scion xD and Pontiac Vibe vehicles. The power window master switch assemblies in some of these vehicles were built using a less precise process for lubricating the internal components of the…
Risk and remedy
Risk
If the switch overheats, it may melt, possibly resulting in a fire.
Remedy
Toyota will notify its owners, and dealers will inspect the switch and apply a special grease that inhibits heat build up or replace any switch damaged by the defect, free of charge. Toyota owners that experience a problem with a switch should not attempt to make repairs, but should contact their Toyota dealer or the Toyota Customer Experience Center at 1-800-331-4331. General Motors will contact the Pontiac Vibe owners affected by this recall and GM dealers will inspect and repair switches as necessary. Those owners may contact Pontiac Customer Care at 1-800-762-2737.
Gulf states toyota IS recalling certain model year 2005-2010 vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold between september 1, 2005 and june 2, 2008 without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
This does not meet the standard requirements.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. Dealers will also correct the owner's manual. the safety recall began on may 27, 2010. owners may contact gulf states toyota at 713-580-3300.
Southeast toyota IS recalling certain model year 2005-2011 passenger vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
A driver may overload a vehicle which may increase the risk of a crash.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. the safety recall began on may 27, 2010. owners may contact southeast toyota at 1-800-301-6859.
Toyota IS recalling certain model year 2005-2010 avalon, model year 2007-2010 camry, model year 2009-2010 corolla, corolla matrix, RAV4, model year 2010 highlander, model year 2008-2010 sequoia, and model year 2007-2010 tundra vehicles. due to the manner in which the friction lever interacts with the sliding surface of the accelerator pedal inside the…
Risk and remedy
Risk
The accelerator pedal may become hard to depress, slow to return to idle, or, in the worst case, mechanically stuck in a partially depressed position, increasing the risk of a crash.
Remedy
Dealers will install a reinforcement bar in the accelerator pedal which will allow the pedal to operate smoothly. gm will notify owners for the pontiac vibe please see 10v-018. this service will be performed free of charge. the safety recall IS expected to begin on february 5, 2010 and will be completed on march 15, 2010. owners may contact toyota at 1-800-331-4331.
Toyota IS recalling certain model year 2004-2010 passenger vehicles. the accelerator pedal can get stuck in the wide open position due to its being trapped by an unsecured or incompatible driver's floor mat.
Risk and remedy
Risk
A stuck open accelerator pedal may result in very high vehicle speeds and make it difficult to stop the vehicle, which could cause a crash, serious injury or death.
Remedy
Toyota filed an amended defect report on november 25, 2009, stating that dealers will modify the accelerator pedal and, on certain vehicles, alter the shape of the floor surface under the pedal. these changes address the risk of pedal entrapment due to interference with the floor mat. redesigned accelerator pedals will become available beginning in april 2010 and dealers will replace any modified pedal with the new pedal if desired. also, dealers will replace any genuine toyota or lexus all-weather floor mats with redesigned all-weather mats, or repurchase the previous mats from owners who do not want the new ones. additionally, software modifications will be installed on camry, avalon and lexus ES 350, IS 350 and IS 250 models that will ensure that the brake overrides the accelerator in the event both brake and accelerator pedals are applied. toyota will begin mailing letters to owners on december 31, 2009. owners may contact toyota at 1-800-331-4331, lexus at 1-800-255-3987.
Certain all weather floor mats (awfm) specifically sold as an optional accessory for use on the 2007 and 2008 model year lexus es350 and toyota camry vehicles. the awfm includes two grommet holes and retaining hooks (clips) to secure the mat to the vehicle's carpet. if the awfm IS not secured by itself or if it IS placed on top of an existing carpeting…
Risk and remedy
Risk
The accelerator pedal may temporarily become stuck in a partially depressed position when returning to the idle position. if this condition occurs, it may increase the possibility of a crash.
Remedy
Toyota will notify owners of all 2007 and 2008 lexus es350 and toyota camry vehicles about the recall even though not all of these owners will have purchased the all weather mats. if the owner had not purchased the mats, they are not affected by the recall. this letter will advise owners when replacement mats will be available or how to return the all weather floor mat set to obtain a refund. a second letter will be sent after mats are available requesting owners to return their mats to a lexus or toyota dealer for exchange of the driver's side mat. the first letter IS expected to be sent during early october 2007 and the second in late november 2007. owners can contact the lexus customer assistance center at 1-800-255-3987 or the toyota customer experience center at 1-888-270-9371.
On certain vehicles, due to improper assembly of the air bag inflator, which IS used in the side air bag, the curtain shield air bag, and the knee air bag assembly, some inflators were produced with an insufficient amount of the heating agents necessary for proper air bag deployment. in this condition, the expansion force of the gas may be insufficient to…
Risk and remedy
Risk
This may increase the risk of injury to the occupant in the involved seating position in the event of a crash.
Remedy
Dealers will replace the specific srs air bag. the recall began on april 6, 2006. owners may contact toyota at 1-888-270-9371, scion at 1-866-548-1851, or lexus at 1-800-255-3987.
Owner complaints
2,888 complaints271 involved a crash64 involved a fire180 injuries4 deaths
What owners report most
Latest complaints
- Air bags · Steering
The contact owns a 2007 Toyota Camry. The contact stated that while her daughter was driving at approximately 20-25 MPH over gravel, the steering wheel locked, preventing steering control. The vehicle crashed center mass into the corner of a building. The air bags failed to deploy upon impact.…
The contact owns a 2007 Toyota Camry. The contact stated that while her daughter was driving at approximately 20-25 MPH over gravel, the steering wheel locked, preventing steering control. The vehicle crashed center mass into the corner of a building. The air bags failed to deploy upon impact. Smoke was present following the crash, rendering the vehicle undrivable. The vehicle was towed to a service center. The driver and passengers sustained muscle injuries and received medical treatment from a Doctor. The insurance company inspected the vehicle. The failure mileage was approximately 68,000.
- Unknown or other · Visibility/wiper
The dash has liquefied making it shiny causing it to be reflective making it nearly impossible to see out of the front window. This happens on a normal sunny day or at night with car lights hitting and reflecting. This should be a safety campaign.
- Electrical system
The contact owns 2007 Toyota Camry. The contact stated while driving at an undisclosed speed, the contact's son who was seated in the rear seat, became aware of an abnormal odor inside the vehicle. The contact stated that there was black smoke between the front driver's side near the steering wheel…
The contact owns 2007 Toyota Camry. The contact stated while driving at an undisclosed speed, the contact's son who was seated in the rear seat, became aware of an abnormal odor inside the vehicle. The contact stated that there was black smoke between the front driver's side near the steering wheel and the driver's seat. There was dark black smoke inside the door switch location. No warning lights were illuminated. The contact parked the vehicle, and the contact and son exited the vehicle. The contact stated that while exiting the vehicle, there was fire inside the door panel. The Fire Department arrived and extinguished the fire. The vehicle was towed to a local tow yard. A Police report was not filed. No injuries were sustained. The vehicle was not inspected by the insurance company. The dealer was made aware of the failure. The contact was informed that an unknown recall for the door master switch replacement was completed on 05/14/2025. The manufacturer was made aware of the failure, and a case was filed. The failure mileage was unknown.
- Engine
My 2007 Toyota Camry was manufactured with faulty piston rings that Toyota acknowledges that causes the engine to burn oil. I need to put 1/4 of quart of oil per week to avoid the engine from burning and up risking it from catching on fire. Toyota offered to fix this issue from 2008-2010, but I was…
My 2007 Toyota Camry was manufactured with faulty piston rings that Toyota acknowledges that causes the engine to burn oil. I need to put 1/4 of quart of oil per week to avoid the engine from burning and up risking it from catching on fire. Toyota offered to fix this issue from 2008-2010, but I was not notified nor was I aware of this issue. It wasn't until 2020 when my car got about 70k miles that I started to notice the oil burning. It now has 92k miles and the issue has worsened and Toyota will not fix their defect.
- Engine · Exterior lighting
Vehicle runs low of engine oil quickly. I've gotten oil changes by dealer and always explain i have to purchase oil every 3 weeks to top off. Was told its a leak but I never see oil on the ground where I park.Its been like this since I've purchased the vehicle. The headlights are not bright no matter if i change the bulb or the actual headlight
- Structure › Interior panels › Dashboard
My 2007 Toyota Camry has a severely melted and sticky dashboard, a known manufacturing defect (Program ZE6). The surface has become highly reflective, creating a blinding sun glare on the windshield that significantly obstructs my visibility while driving, posing an immediate safety hazard.…
My 2007 Toyota Camry has a severely melted and sticky dashboard, a known manufacturing defect (Program ZE6). The surface has become highly reflective, creating a blinding sun glare on the windshield that significantly obstructs my visibility while driving, posing an immediate safety hazard. Additionally, the melting material releases pungent chemical fumes (VOCs) in the cabin, causing respiratory discomfort and health concerns. Despite being a documented safety defect, Toyota refused a goodwill repair because the initial warranty program has expired. A safety defect that impairs driver vision should not have an expiration date.
- Electrical system · Seat belts · Unknown or other
Driver seat belt gets stuck sometimes or sometimes does not want to click not often but pretty randomly. The driver window control panel also started to smoke for 5 minutes the smoke started coming out the whole driver panel door and caused excessive heat. Seems that something burnt it was smelling like burnt plastic .
- Engine
I purchased my 2007 Toyota Camry brand new. Since early ownership, the vehicle has suffered from excessive engine oil consumption. Toyota acknowledged this issue and performed major engine repairs at a Toyota dealership, including replacing pistons and piston rings under their oil consumption…
I purchased my 2007 Toyota Camry brand new. Since early ownership, the vehicle has suffered from excessive engine oil consumption. Toyota acknowledged this issue and performed major engine repairs at a Toyota dealership, including replacing pistons and piston rings under their oil consumption program, but the defect continued. The vehicle continues to consume approximately 1.5 quarts of oil every 1–2 months. This defect affects engine reliability and long-term safety. Despite these repairs, the oil consumption problem was never resolved. I was instructed by Toyota to track the amount of oil I was forced to purchase and was told I would be reimbursed. I complied, but Toyota never reimbursed me. I have an extensive repair history with Toyota. A Toyota dealership technician informed me that my repair history is unusually extensive and described it as a “book” in Toyota’s system. The vehicle continues to consume excessive oil, requiring frequent top-offs that pose a risk of engine failure if not constantly monitored. Toyota has failed to permanently correct a known defect despite repeated repair attempts. I believe this is a widespread defect affecting 2007 Toyota Camry vehicles equipped with the 2AZ-FE engine and request NHTSA review this matter.
- Visibility
See attached document for complaint.
- Electrical system · Service brakes · Vehicle speed control
When I purchased this vehicle there were no problems, no lights on my dash, the trim all matched and was the color blue. Then after having a falling out with some family members I started noticing problems with my HVAC system. It started with antifreeze leaks then id fix it and the next week the…
When I purchased this vehicle there were no problems, no lights on my dash, the trim all matched and was the color blue. Then after having a falling out with some family members I started noticing problems with my HVAC system. It started with antifreeze leaks then id fix it and the next week the radiator hose would be leaking again. I started really keeping track of everything about my car after that. Next I started noticing parts changed and parts missing. My VSC fuse block in the engine bay is completely missing now. Next I started noticing while driving my seat would move without me doing anything. The family member that I had a falling out with is in the HVAC union also. While driving I hear some type of switch click on and a gas smell starting coming out of my vents. Also I noticed after getting an aliment done that someone had adjusted the aliment bolts over night it's very noticable. You can clearly see where someone ran new electric wires for something. I went to the police 3 the mea about the issue but no investigation. Please help.
- Fuel/propulsion system · Service brakes
Contacted TMC and was told a recall WAS performed on my car in 2010 for excessive acceleration. However, after further investigation, I learned there was not ONE but TWO different recalls for SIMILAR circumstances(acceleration) and was not informed whether BOTH were completed. I have had vehicle…
Contacted TMC and was told a recall WAS performed on my car in 2010 for excessive acceleration. However, after further investigation, I learned there was not ONE but TWO different recalls for SIMILAR circumstances(acceleration) and was not informed whether BOTH were completed. I have had vehicle for approx. 5 years and have intermittently experienced the SAME problem. The last few weeks, it has happened more frequently and is becoming dangerous to drive! Also, I was told, since the ONE recall was completed, TMC declined to address the recent problem. Is there a possibility the FIRST recall was not COMPLETELY SUFFICIENT for both. I hope I can get an answer, as I have run out of options. I don't believe I should have to PAY for something that was supposedly FIXED even 10 years ago! I would, again appreciate any help. Thank you.
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2007 Toyota Camry. The contact discovered a mileage discrepancy after the purchase. The vehicle was a private sale. At the time of purchase, the vehicle mileage was 144,000. It was later discovered that the mileage on the Title was 291,510.
- Air bags
Heard a pop while driving and the side airbag cover doesn’t properly stay in place
- Service brakes
ABS and VSC lights on the dash have been flashing on and off for the last few years. They always went off after flashing. 2 weeks ago they both flashed on and the warning message "Check VSC System" came on with a loud buzzing whine. Now they will not go off. The brake pedal pulses back when…
ABS and VSC lights on the dash have been flashing on and off for the last few years. They always went off after flashing. 2 weeks ago they both flashed on and the warning message "Check VSC System" came on with a loud buzzing whine. Now they will not go off. The brake pedal pulses back when applied and felt very hard. It took the car a long time to stop which is a safety danger. Took it to an independent mechanic and he diagnosed that the ABS system has failed. He also mentioned that Toyota issued several Customer Support Notices to repair or replace the unit but I did not get them even though I am the only owner and still resides at the same address. He gave me the notices and I went to a Toyota dealer but it refuse to provide any warranty work and wanted to charge me for another diagnosis, stating the notices had long expired.
- Forward collision avoidance › Automatic emergency braking · Fuel/propulsion system · Service brakes
All of a sudden, all of my warning lights came on including: brake light, check vcs system, ABS, all of the exclamation lights, etc.. Ive been very diligent about the maintenace on y vehicle and had the codes read and reset, but they keep coming back on. The major issues are the ABS, catalytic…
All of a sudden, all of my warning lights came on including: brake light, check vcs system, ABS, all of the exclamation lights, etc.. Ive been very diligent about the maintenace on y vehicle and had the codes read and reset, but they keep coming back on. The major issues are the ABS, catalytic converter eror code & the ABS making it difficult to break. Ive had it looked at and the mechanics are saying that this IS a common problem. also, the mirror visor on driver side stopped working & constantly falls down blocking my view. Its very dangerous! Please advise toyota of these issues. Ive already had the hybrid battery completely replaced and breaks & routers, but the codes showing are: •p0420 and •p1423, •c1391, - ask about a recall •b1241, •b2784, •b2281, •c2124 thank you so much!
- Engine
Engine—was told by dealership that we needed a new motor because of lack of oil in engine - had not seen oil drips or any smoking out of muffler. No lights on dashboard. Only been serviced by dealership. Told us; we needed to keep check and add oil as needed until we decided on a new motor or…
Engine—was told by dealership that we needed a new motor because of lack of oil in engine - had not seen oil drips or any smoking out of muffler. No lights on dashboard. Only been serviced by dealership. Told us; we needed to keep check and add oil as needed until we decided on a new motor or trade. Either is not a good option because of expense. We are probably going to bite the bullet and have to trade with not being able to get much out of trade because of this. The car is in very good condition, no wrecks and had hoped we were to get more mileage. We keep check and add oil. Know this is just a complaint, but am sure others had same problem.
- Structure › Interior panels › Dashboard
The contact owns a 2007 Toyota Camry. The contact had received notification of the Toyota Warranty Enhancement Program – ZE6. The contact stated that gradually over time the dashboard had started peeling and cracking. The local dealer was contacted; however, the vehicle was not diagnosed or…
The contact owns a 2007 Toyota Camry. The contact had received notification of the Toyota Warranty Enhancement Program – ZE6. The contact stated that gradually over time the dashboard had started peeling and cracking. The local dealer was contacted; however, the vehicle was not diagnosed or repaired. The contact was advised to be patient for the parts to become available. A dealer was not contacted. The manufacturer was notified of the failure. The approximate failure mileage was 50,000.
- Engine
Excessive engine oil consumption. Penske Toyota of Downey would Not fix my car when I took it in. I received a letter from Corporate Toyota. I also received a letter on the sticky dash board. They replaced the dash board but, they would Not fixed my engine problem. I took their word for it and now…
Excessive engine oil consumption. Penske Toyota of Downey would Not fix my car when I took it in. I received a letter from Corporate Toyota. I also received a letter on the sticky dash board. They replaced the dash board but, they would Not fixed my engine problem. I took their word for it and now I have to check my oil often and keep oil in my trunk. I never get an oil warning light. I just have to make sure by checking it often. Penske refused to fix my car, they told me it was normal for my car to lose oil. I was made aware of both problems back to back by Corporate Toyota but Penske said no. No problem here according to them. So… the problem just got worst and worst over time.
- Engine and engine cooling
The contact owns a 2007 Toyota Camry. The contact stated that while operating the vehicle, the check engine warning light remained illuminated and there was black exhaust smoke coming from the exhaust pipes. Additionally, the contact stated that the vehicle had experienced excessive oil…
The contact owns a 2007 Toyota Camry. The contact stated that while operating the vehicle, the check engine warning light remained illuminated and there was black exhaust smoke coming from the exhaust pipes. Additionally, the contact stated that the vehicle had experienced excessive oil consumption. The vehicle was taken to the local mechanic who was unable to determine the cause of the failure. The manufacturer was notified of the failure, but no assistance was offered. The local dealer was not yet contacted. The failure mileage was approximately 105,000.
- Visibility/wiper
Because of the sticky dash’s glare on the driver side windshield, I could not see the car ahead of me at all. I almost hit a car that was in front of me not because he had braked because we were both still in motion but the glare was directly in my line of vision. I just happened to put my hand up…
Because of the sticky dash’s glare on the driver side windshield, I could not see the car ahead of me at all. I almost hit a car that was in front of me not because he had braked because we were both still in motion but the glare was directly in my line of vision. I just happened to put my hand up over the glare and saw there was actually a silver car in front of me and I was way to close to it. No accident occurred but it almost did and certainly could have injured me and/or my passengers. This has to be fixed! That scared me to death! I truly had no idea there was a car in front of me as I could NOT see it from the dash’s glare off the windshield.
- Engine
The problem that I have is the same as the one I years ago. There was a recall on 2007 Toyota Camrys for oil consumption. At the time I waws never getting the maintenance indicator because the engine would run low on oil before I needed an oil change. I am having the same problem again. The car is…
The problem that I have is the same as the one I years ago. There was a recall on 2007 Toyota Camrys for oil consumption. At the time I waws never getting the maintenance indicator because the engine would run low on oil before I needed an oil change. I am having the same problem again. The car is not leaking oil. It's consuming oil. I now must drive around with extra oil in the trunk in case the oil is low. I have been a Toyota owner since 1986. I have always thought of Toyota as being one of the most reliable cars on the road. I have taken the car to the dealer near me (Toyota South Morrow, GA). Of course they do not want to further investigate this problem further. But I am sure is the problem. My mechanic also agrees that this is likely the problem.? What component failed? Engine / Oil How was your safety or the safety of others put at risk? The car could stop at any time with engine failure, blown gaskets, etc. The problem is easily reproduce every oil change. Toyota Dealership has reviewed the problem. Now the consumption is so bad I have to check the oil every 2 weeks. The low oil indicator does not come on. Is there another recall possible if this first recall doesn't fix the problem permanently.
- Structure › Interior panels › Dashboard
The contact owns a 2007 Toyota Camry. The contact stated that the dashboard was fractured and was previously replaced under Toyota Campaign Number: ZE6. The contact stated that the new dashboard was sticky and melting, causing a reflection on the windshield, which reduced the driver's ability to…
The contact owns a 2007 Toyota Camry. The contact stated that the dashboard was fractured and was previously replaced under Toyota Campaign Number: ZE6. The contact stated that the new dashboard was sticky and melting, causing a reflection on the windshield, which reduced the driver's ability to see the roadway. The dealer was not notified of the failure. The manufacturer was notified of the failure and informed the contact that the vehicle was not covered under warranty. The failure mileage was approximately 154,000.
- Air bags
I have been in an accident on [XXX] at this location [XXX] . I was driving the Toyota Camry 2007 model car. So my car got with another car. From the accident my front of the car got damaged heavily, even though the airbags didn't deployed. So my chest got hit with steering and had a neck injury INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Service brakes · Wheels
Hi, In my car VSC light is always on, I got it scan as well but it doesn't show any code for VSC and ABS systems. Toyota dealership also don't give any information about the codes. It's kind of very dangerous to drive with all the lights on the cluster. Thank You
- Engine · Visibility/wiper
Vehicles dash board is melting. Produces a high shine effect that reflects sunlight into the front glass, effectively blinding the driver. Toyota has acknowledged this in a “warranty enhancement program” but will no longer repair the dashboard as the recall has “expired”. The warranty program had…
Vehicles dash board is melting. Produces a high shine effect that reflects sunlight into the front glass, effectively blinding the driver. Toyota has acknowledged this in a “warranty enhancement program” but will no longer repair the dashboard as the recall has “expired”. The warranty program had expired prior to me taking ownership of the vehicle. Engine burns oil due to piston assembly manufacturing errors. Toyota has acknowledged this in T-SB-0158-14 but will no longer repair the engine as the recall has “expired”. The recall had expired prior to me taking ownership of the vehicle.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Power Window Master Switch Fire
On October 10, 2012, Toyota initiated a safety recall of approximately 2.5 million U.S. vehicles involving the following models and model years:2007-2009 Camry and Camry Hybrid, 2009 Corolla and Corolla Matrix, 2008 Highlander and Highlander Hybrid, 2007-2009 RAV4, 2008-2009 Scion xB and xD, 2008-2009 Sequoia…
On October 10, 2012, Toyota initiated a safety recall of approximately 2.5 million U.S. vehicles involving the following models and model years:2007-2009 Camry and Camry Hybrid, 2009 Corolla and Corolla Matrix, 2008 Highlander and Highlander Hybrid, 2007-2009 RAV4, 2008-2009 Scion xB and xD, 2008-2009 Sequoia, 2007-2008 Tundra, 2007-2008 Yaris, and 2009 Pontiac Vibe.See NHTSA recall number 12V-491 for more details, including the affected vehicle manufacture dates for each vehicle model.Note that only early-production 2009 model year vehicles are included in the recall.Toyota and GM dealers will inspect the power window master switch (PWMS) assemblies and apply a specialized grease that inhibits heat build-up.The circuit board in the PWMS may be replaced with a new one if notchy or sticking feeling is observed during the inspection.The failure report summary above shows counts for the vehicles identified at the start of this Engineering Analysis, specifically the approximately 1.4 million vehicles that share an identical PWMS assembly design including, model year 2007-2009 Camry, Camry Hybrid, RAV4, and Yaris built from September 2006 through August 2008, as well as all 2008 Highlander Hybrid.Toyota subsequently identified approximately one million additional vehicles that have a slightly different PWMS design but contain the same defect condition.Note that the totals for complaints and fires shown above may include duplicative reports (between ODI and manufacturer reports).This Engineering Analysis is closed.See attached report for additional information.The ODI reports cited above can be viewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10323848, 10360414, 10392622, 10394453, 10411328, 10429983, 10436663, 10446699, 10447416, 10447417, 10447419, 10447444, 10447515, 10447845, 10447947, 10449270, 10450133, 10450568, 10450606, 10450641, 10451821, 10455540, 10455614, 10456353, 10456438, 10457854, 10457955, 10459730, 10460166, 10460691, 10461220, 10462140, 10462200, 10462247, 10462404, 10462705, 10462761, 10464451, 10464769, 10465421, 10466279, 10466667, 10468126, 10468265, 10475230, 10470313, 10470684, 10471551, 10471824, 10472336, 10472910, 10473753, 10473967, 10473969, 10476921, 10477469, 10478563 and 10478657.
- Power Window Master Switch Fire
ODI has identified certain Toyota vehicles experiencing a higher rate of fire and thermal event incidents among all Toyota vehicles that use the same power window master switch design.They include a total of approximately 1.4 million model year (MY) 2007 through 2009 Camry, Camry Hybrid, RAV4 and Yaris vehicles built…
ODI has identified certain Toyota vehicles experiencing a higher rate of fire and thermal event incidents among all Toyota vehicles that use the same power window master switch design.They include a total of approximately 1.4 million model year (MY) 2007 through 2009 Camry, Camry Hybrid, RAV4 and Yaris vehicles built from approximately September 2006 through August 2008, as well as all MY 2008 Highlander Hybrid vehicles.This Preliminary Evaluation has been upgraded to an Engineering Analysis (EA12-006) to further study the alleged defect and its consequences.The ODI reports cited above can be viewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10461220, 10460691, 10460166, 10459730, 10457955, 10457854, 10456438, 10456353, 10455614, 10455540, 10451821, 10450641, 10450606, 10450568, 10450133, 10449270, 10447947, 10447845, 10447515, 10447444, 10447419, 10447417, 10447416, 10446699, 10436663, 10429983, 10411328, 10407290, 10394453, 10392622, 10360414, 10323848.
- Unwanted acceleration, floor mat
The driver side floor mat will not interfere with the throttle pedal if properly secured using the retaining hooks provided by toyota.however, if the all weather mat IS unsecured and moves forward from its intended position it can entrap the throttle pedal at the fully open position after it has been depressed.this…
The driver side floor mat will not interfere with the throttle pedal if properly secured using the retaining hooks provided by toyota.however, if the all weather mat IS unsecured and moves forward from its intended position it can entrap the throttle pedal at the fully open position after it has been depressed.this can happen regardless of whether or not another mat (carpet) IS underneath.when this occurs, some operators react by applying the brake pedal multiple times, depleting the braking system's (vacuum based) power assist.stopping the vehicle with unassisted braking while the throttle IS fully open requires significant pedal force, which some operators did not, or were unable to, apply for the required duration.continued driving in this condition results in overheated brakes, which further diminishes the braking effectiveness.some operators attempted to turn the vehicle off by depressing the engine control button, however they were unaware the button had to be depressed for three seconds to stop the engine when the vehicle IS in motion; this functionality was not explained adequately in the owner's manual.in odi interviews, owner's reported they were unaware the all weather mat had the potential to interfere with the throttle pedal, advising that this was never properly explained given the significant hazard it represented.owners reported several explanations for why the mat was unsecured, including that the vehicle was delivered in this condition (most common reason), or that they had (unwittingly) installed the mat themselves, or that another party, such as a car wash attendant, had disturbed the mat without the owner's knowledge.one consumer reported that their vehicle was delivered without the retaining devices installed.in a september 26, 2007 letter to nhtsa, toyota indicated that they would conduct a safety recall to replace the all weather mat with a redesigned mat.according to toyota, the new mat design will reduce the potential for mat interference with the throttle pedal.the population noted above represents the number of subject matsthat have been sold in the united states.since toyota cannot identify which vehicles may have the subject mats, they will send a letter to all registered owners of the subject vehicles (estimated 750K) advising them of the concern and remedy.a copy of that letter will be posted to nhtsa's web site under recall 07e-082; it contains a description of the condition and the actions an operator should take in the event throttle entrapment occurs while driving.the fatality incident noted above occurred in july 2007 and was investigated by nhtsa's special crash investigations office.it has not been reported on a vehicle owner questionnaire.the operator reportedly travelled at speeds in excess of 100 mph for an estimated eight miles on an interstate in california before it struck two other vehicles.one of the struck vehicles and the subject vehicle caught fire.the occupant of the struck vehicle did not evaculate and died at the scene.the subject vehicle driver suffered a broken bone.the california highway patrol IS investigating the incident also.odi did not issue an information request letter during this investigation.the toyota reports noted above were reported during preliminary evaluation pe07-016 and are current through april 2007 for my 2007 lexus es350 only.odi does not have field experience data from toyota for camry vehicles.throttle entrapment due to improperly installed floor mats could be a concern in all vehicles.therefore, drivers should always ensure their floor mats are properly and safely installed.this incl
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10210376OBSOLETE NOTICE Month 09, 2022: This bulletin is now obsolete. Please see T-SB-0014-22.
- 10210375TSB: This Service Bulletin includes procedures to replace damaged or loose front carpet floor retainer(s) without replacing the carpet assembly. Follow the Repair Procedure in this bulletin to replace the loose or damaged carpet floor retainer(s).
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10204571TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10203532TT: Some customers may encounter Bluetooth connectivity concerns such as: ?Difficulty to pair the phone. ?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
- 10201400TSB: Some 2006 ? 2022 model year Toyota vehicles in particular geographic areas may exhibit a condition where the HVAC evaporator drain hose has become obstructed with an insect nest. An insect repellent drain hose tip (ARINIX Tip) is available to help minimize future occurrences of this environmental condition. For some models, a new drain hose is required to properly fit the ARINIX Tip. Follow the procedures in this bulletin for proper handling and installation of this optional service part.
- 10197492Warranty enhancement program.
- 10197491Warranty enhancement program.
- 10197476Replacement vin plates.
- 10197473Product general information.
- 10190460Toyota Safety Recall and Service Campaign - Technician Certification Requirements
- 10190453TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10190449OBSOLETE NOTICE March 08, 2021: This bulletin is now obsolete. Please see T-SB-0044-16.
- 10188913TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2021 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10187241TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
Every Toyota Camry model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.