2014 Toyota Camry
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Camry › 2014
These records cover every 2014 Toyota Camry. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2014 Toyota Camry. Newest first.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2014 Toyota Camry, Camry HV, Avalon, and Avalon HV vehicles equipped with 16-inch and 17-inch rims. In the affected vehicles, the left-side front suspension lower arm may have been incorrectly manufactured. As a result, the left side lower arm may not have enough clamping…
Risk and remedy
Risk
Because of the insufficient clamping force, the lower arm may separate from the ball joint, increasing the risk of a crash.
Remedy
Toyota will notify owners, and dealers will replace the left side lower arm, free of charge. The recall began on December 12, 2014. Owners may contact Toyota customer service at 1-800-331-4331.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2014 Toyota Avalon, Camry, Sienna, and Highlander and model year 2015 Lexus RX350 vehicles. Fuel may leak from the one of the fuel delivery pipes in the engine compartment.
Risk and remedy
Risk
A fuel leak in the presence of an ignition source increases the risk of a fire.
Remedy
Toyota will notify owners, and dealers will replace any of the suspect fuel delivery pipes free of charge. The recall began November 17, 2014. Owners may contact Toyota customer service at 1-800-331-4331.
Toyota Motor Engineering & manufacturing North America, Inc. (Toyota) is recalling certain model year 2013-2014 Camry and Camry HV, model year 2013 Avalon and Avalon HV and model year 2014 Corolla vehicles. In the affected vehicles, the windshield wiper switch assembly may short circuit. As such, these vehicles fail to conform to the requirements of…
Risk and remedy
Risk
A short circuit could cause inoperative windshield wipers, reducing driver visibility and increasing the risk of a crash.
Remedy
Toyota will notify owners, and dealers will replace the wiper switch assembly, free of charge. The recall began on November 8, 2013. Owners may contact Toyota at 1-800-331-4331.
Owner complaints
455 complaints60 involved a crash4 involved a fire41 injuries1 deaths
What owners report most
Latest complaints
- Air bags
My safety was put at risk because I did not have the protection of the airbags during a serious head-on collision. I was wearing my seat belt, but I still suffered a concussion, bruised ribs, two sprained ankles, pain in my head, neck, back, tailbone, jaw, and shoulder, as well as a burn from the…
My safety was put at risk because I did not have the protection of the airbags during a serious head-on collision. I was wearing my seat belt, but I still suffered a concussion, bruised ribs, two sprained ankles, pain in my head, neck, back, tailbone, jaw, and shoulder, as well as a burn from the seat belt. Since the accident, I have also experienced difficulty opening my mouth and eating on the right side and jaw pain and popping. The failure has not been reproduced or confirmed by a dealer or independent repair shop because the car is not drivable. I contacted Toyota and signed a consent form allowing them to investigate the vehicle, but I have not received an update, their findings, or confirmation that the inspection has been completed. The vehicle is currently at a tow yard and is available for inspection upon request. However, I am being charged $75 per day in storage fees and cannot afford to keep it there indefinitely. Before the crash, I was not aware of any airbag warning lights, warning messages, or other signs that the airbag system was not working.
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2014 Toyota Camry. It was discovered that there was a mileage discrepancy. The vehicle was a dealer sale. At the time of purchase, the vehicle mileage was 137,385, and at the time of registration, it was discovered that the mileage was 187,888.
- Air bags
SRS airbag panel has detached on the windshield side and top.
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2014 Toyota Camry. At the time of purchase, the vehicle mileage was 160,000. The vehicle was a private sale. The contact stated that during a routine oil change, it was discovered that there was a mileage discrepancy. The contact was made aware that the mileage was 235,000. Additionally, a Carfax report listed the mileage at 257,000.
- Engine
The contact owns a 2014 Toyota Camry. The contact stated while driving at an undisclosed speed, the engine seized. No warning lights were illuminated. The contact stated that while attempting to start the vehicle, the vehicle started. The failure was persistent. The vehicle was taken to AutoZone…
The contact owns a 2014 Toyota Camry. The contact stated while driving at an undisclosed speed, the engine seized. No warning lights were illuminated. The contact stated that while attempting to start the vehicle, the vehicle started. The failure was persistent. The vehicle was taken to AutoZone where it was diagnosed with a failed intake valve and a failed exhaust. The vehicle was then taken to the dealer where it was diagnosed with a failed engine. The contact was informed that the engine needed to be replaced. The vehicle was being repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 109,000.
- Power train
The torque converter is malfunctioning. This malfunction can damage the entire transmission by releasing metal debris into the transmission system due to severe shuddering. If the torque converter fails while driving, I could lose acceleration power and potentially lose power steering assist and…
The torque converter is malfunctioning. This malfunction can damage the entire transmission by releasing metal debris into the transmission system due to severe shuddering. If the torque converter fails while driving, I could lose acceleration power and potentially lose power steering assist and brake assist if the engine stalls, making the vehicle significantly harder to control. This creates a serious safety risk, especially at highway speeds where a sudden loss of power could increase the risk of a collision. The torque converter was previously subject to a recall, but the recall has since expired. The issue has been reproduced and documented by an independent service provider. Although no warning lights appear on the dashboard, the vehicle consistently shows symptoms associated with torque converter failure, including: * Intense shuddering * Loss of power during acceleration * Transmission slipping These symptoms indicate an ongoing and potentially dangerous drivetrain failure that poses a risk to driver and public safety.
- Structure › Body
Driving on all American highway on my way to work there were 2 tote black boxes on the left lane causing me to hit them with no alternative. My front part of vehicle is damaged
- Power train
Transmission shudder - noticed transmission vibration at speeds from 25 to 30 mph and before 50 mph. Took the car to a shop for wheel alignment, vibration still felt. Took to a dealer , Hamer Toyota in Mission Hills, CA., and dealer said, it could be just the transmission oil, so I had the oil…
Transmission shudder - noticed transmission vibration at speeds from 25 to 30 mph and before 50 mph. Took the car to a shop for wheel alignment, vibration still felt. Took to a dealer , Hamer Toyota in Mission Hills, CA., and dealer said, it could be just the transmission oil, so I had the oil change done. Problem was the same. Took it for tire rotation and balance, but problem was the same. Called the Toyota Company and Toyota said, the extended warranty on the transmission expired in 2022. I said, it’s only 100,000 miles, but less than 150,000 miles — which was the maximum extended mileage warranty. Toyota insisted they could not do anything because 2022 came 1st and not the 150k miles. Took it to a transmission shop and after diagnosis, had it .rebuilt. Rebuilding partially solved the problem, a little improvement from before. Took it back for more checking until finally, after valve body assembly replacement, shudder is gone.
- Power train
The contact owns a 2014 Toyota Camry. The contact stated that while driving approximately 20 MPH, the accelerator pedal was depressed, and the vehicle hesitated before jolting into the next gear. The contact stated that occasionally the vehicle almost stalled and was shuddering abnormally before…
The contact owns a 2014 Toyota Camry. The contact stated that while driving approximately 20 MPH, the accelerator pedal was depressed, and the vehicle hesitated before jolting into the next gear. The contact stated that occasionally the vehicle almost stalled and was shuddering abnormally before shifting into the next gear. There was also an abnormal grinding sound coming from underneath the vehicle. There was no warning light illuminated. The vehicle was taken to a local dealer to be diagnosed. The contact was informed that the transmission needed to be replaced. The dealer stated that at a minimum, the torque converter needed to be replaced and the TCM needed to be reprogrammed. The vehicle was not repaired. The manufacturer was informed of the failure. The failure mileage was approximately 124,000.
- Electrical system · Power train
There is a transmission shudder when traveling around 30-40 MPH as well as sporadically when increasing speed. Recently, there is a very hard shift/jolt when transmission is shifting from 2nd to 3rd. The issue is caused by a combination of a faulty torque converter and a software glitch in the…
There is a transmission shudder when traveling around 30-40 MPH as well as sporadically when increasing speed. Recently, there is a very hard shift/jolt when transmission is shifting from 2nd to 3rd. The issue is caused by a combination of a faulty torque converter and a software glitch in the engine control module (ECM). This is a safety hazard, and I contacted Toyota dealership in Vineland who told me that they can't do anything. However, to fix the problem that Toyota issued the recall themselves, Toyota dealers need to replace to the torque converter and update the ECM software. I am reaching out to the NHTSA because this is a safety hazard, and I hope you are able to help me.
- Power train
At 130,000 the torque converter went and now I need a costly transmission repair, the days of Toyota reliability are long gone
- Electrical system · Power train · Wheels
The vehicle has an issue with the radio the steering wheel controls do not work the touch screen does not work the buttons around the radio does not work there is also an issue with the transmission between 20 mph and 25 mph in extreme shutter happens that cuts off goes away there is no…
The vehicle has an issue with the radio the steering wheel controls do not work the touch screen does not work the buttons around the radio does not work there is also an issue with the transmission between 20 mph and 25 mph in extreme shutter happens that cuts off goes away there is no transmission light lit there is no check engine light lit I am completely at a loss to figuring out the repair I do not want to spend thousands and thousands of dollars to have it repaired with a mechanic shop I have noticed that with the 2014 Toyota Camry 95% of the vehicles all have the same issue transmission shutter and the electrical issue with the radio this is a very extremely common issue and I wish they would have it recalled and repaired because Toyota Camry 2014 is a very good reliable vehicle only it has issues and it has issues with a lot of the exact same vehicle I have read forum after forum in regards to the radio I cannot repair it I had tried to replace the entire unit and the unit that I had replaced it with is doing the exact same thing I am terrified to open the transmission because nine times out of 10 I will not figure out the issue I could pay thousands and thousands of dollars to have the transmission replaced or repaired but I don't feel like it should be the owners issue or responsibility to repair the vehicle when 90% of the vehicles out here have the exact same issues due to manufacturer issue really hoping they recall this it will give Toyota a better look I have also noticed that no matter how many times I reset the tire pressure sensor monitor and ensure that all tires have the correct amount of air that the tire light will not go off and will not go away these issues have been around for a very long time since I've had the vehicle and no matter the amount of time and amount of money I spend putting into the vehicle for parts the issues will not go away
- Electrical system · Hybrid propulsion system
The contact owns a 2014 Toyota Camry. The contact stated that while driving at an undisclosed speed, the Hybrid system warning light illuminated, prompting the contact to discontinue driving the vehicle. The vehicle was taken to the dealer, who diagnosed a failure with the Hybrid Propulsion System…
The contact owns a 2014 Toyota Camry. The contact stated that while driving at an undisclosed speed, the Hybrid system warning light illuminated, prompting the contact to discontinue driving the vehicle. The vehicle was taken to the dealer, who diagnosed a failure with the Hybrid Propulsion System battery. The contact was informed that the Hybrid battery showed signs of arcing. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 123,000.
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2014 Toyota Camry. The contact discovered a mileage discrepancy after the purchase. The vehicle was a private sale. At the time of purchase, the vehicle mileage was 90,000. It was later discovered that the mileage on the Title was 200,000.
- Electrical system · Structure › Body
The radio buttons as well as buttons on steering wheel are unresponsive. In addition the front bumper corner piece near the wheel keeps popping off of the car.
- Unknown or other
I own a 2014 Toyota Camry with 163,000 miles. For years, I’ve experienced a noticeable shudder and vibration around 40–50 mph, which I now understand is a common defect related to the torque converter and addressed in a Toyota-issued TSB (T-SB-0168-14). I was never notified of this bulletin…
I own a 2014 Toyota Camry with 163,000 miles. For years, I’ve experienced a noticeable shudder and vibration around 40–50 mph, which I now understand is a common defect related to the torque converter and addressed in a Toyota-issued TSB (T-SB-0168-14). I was never notified of this bulletin, despite having my car serviced regularly. Toyota and its dealers consistently failed to inform me of this issue, and now that I’m just over the mileage cap, they are refusing to assist. I feel deceived and upsold on unnecessary repairs when a known, more affordable fix existed. This is an unethical practice and a known problem that needs further federal investigation.
- Engine · Vehicle speed control
While driving at speed over 45 mph or going up a steep hill car starts to shutdown and shudder causing a serious safety concern. I could have been killed. I understand this is related to oil consumption problem that toyota has failed to address in the 2014 model. What can be done? This is criminal!
- Air bags
The contact owns a 2014 Toyota Camry. The contact stated that his wife was driving the vehicle and was involved in a crash while stopped on a main road. A vehicle from behind crashed into the entire rear end of their vehicle at 30 MPH. No property damage was reported, and the vehicles came to a…
The contact owns a 2014 Toyota Camry. The contact stated that his wife was driving the vehicle and was involved in a crash while stopped on a main road. A vehicle from behind crashed into the entire rear end of their vehicle at 30 MPH. No property damage was reported, and the vehicles came to a stop upon impact. The air bags were not deployed. The contact's vehicle did not have to be towed. No warning lights were illuminated. A police report was filed. The vehicle was not destroyed. The contact stated that his wife received a minor neck injury, and she was seated in the driver's seat since she was the only occupant in the vehicle. No injuries outside of the contact's vehicle were reported. No medical treatment was needed for the injury. The local dealer was not contacted, there fore the vehicle was not diagnosed. The vehicle was not repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 83,000.
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2014 Toyota Camry. The contact stated that while attempting to register the vehicle, it was discovered that there was a mileage discrepancy. The vehicle was a private sale. At the time of purchase, the vehicle mileage was 148,0000 and at the time of registration, it was discovered that the mileage was 243,000.
- Engine
My car is exhausting oil very rapidly. It’s burning oil from inside the engine. Started 2 months ago. I have never received ANY recalls on it.
- Power train
Problems with tranmission o shutters causing vehicle to jump and stale at 25pm and45mph
- Power train
The contact owns a 2014 Toyota Camry. The contact stated that while driving at various speeds, the transmission was slipping, causing the vehicle to jerk or shudder until shifting into the intended gear. There was no warning light illuminated. The local dealer was contacted; however, the vehicle…
The contact owns a 2014 Toyota Camry. The contact stated that while driving at various speeds, the transmission was slipping, causing the vehicle to jerk or shudder until shifting into the intended gear. There was no warning light illuminated. The local dealer was contacted; however, the vehicle was not diagnosed or repaired. The contact was informed that the VIN was not under recall. The contact referenced Technical Service Bulletin: SB-0034-14 as a possible cause for the failure. The manufacturer was notified of the failure. The approximate failure mileage was 147,600.
- Power train › Automatic transmission › Torque converter
The contact owns a 2014 Toyota Camry. The contact stated while driving at various speeds, the vehicle was shuddering significantly. There was no warning light illuminated. The vehicle was taken to the dealer, where it was diagnosed that the torque converter had failed and needed to be replaced. The…
The contact owns a 2014 Toyota Camry. The contact stated while driving at various speeds, the vehicle was shuddering significantly. There was no warning light illuminated. The vehicle was taken to the dealer, where it was diagnosed that the torque converter had failed and needed to be replaced. The contact related the failure to Toyota Warranty Enhancement Program Number: ZE5; however, the dealer informed the contact that the repair could not be covered under the warranty because the warranty had expired. The vehicle was not repaired due to the cost. The manufacturer was notified of the failure, but no assistance was provided. The failure mileage was approximately 40,000.
- Power train › Automatic transmission › Torque converter
The contact owns a 2014 Toyota Camry. The contact stated that while driving at an undisclosed speed, the vehicle jerked before slamming into gear. No warning lights were illuminated. The vehicle was taken to CTT Transmissions, who diagnosed a failure with the torque converter. The vehicle was not…
The contact owns a 2014 Toyota Camry. The contact stated that while driving at an undisclosed speed, the vehicle jerked before slamming into gear. No warning lights were illuminated. The vehicle was taken to CTT Transmissions, who diagnosed a failure with the torque converter. The vehicle was not repaired, and the failure became regular. The manufacturer was not notified of the failure. The failure mileage was approximately 124,000.
- Power train
I am unsure about the exact cause. But upon some research I have noticed there is an open recall for same model of Car which involved Torque Converter replacement and ECM software update. I have been noticing the exact same issue when I see shudder and Vehicle seems to stop slow down significantly…
I am unsure about the exact cause. But upon some research I have noticed there is an open recall for same model of Car which involved Torque Converter replacement and ECM software update. I have been noticing the exact same issue when I see shudder and Vehicle seems to stop slow down significantly before accelerating and any time I am resuming after Red Light. Which is extremely safety concerns. I want to file a complaint so we can have Toyota Addess this for us.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244115TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10230369DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10230368DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10230367DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
- 10227920DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10227919DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10227918DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
- 10227916DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
- 10227915TI: TECHNICAL INSTRUCTIONS Customer Support Program ZKG Multiple Models and Model Years Vehicles Painted with Blizzard Pearl (070) or Super White (040) Paint Color Coverage for Peeling of Factory-Applied Paint
- 10227914CSP: Customer Support Program ZKG ? Paint Repair Process
- 10227913DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
- 10227912DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10224108TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10220183TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
Every Toyota Camry model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.