2006 Toyota Camry
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Camry › 2006
These records cover every 2006 Toyota Camry. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
5 recalls name the 2006 Toyota Camry. Newest first.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010…
Risk and remedy
Risk
If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
Remedy
SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion…
Risk and remedy
Risk
Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
Remedy
SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.
Gulf states toyota IS recalling certain model year 2005-2010 vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold between september 1, 2005 and june 2, 2008 without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
This does not meet the standard requirements.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. Dealers will also correct the owner's manual. the safety recall began on may 27, 2010. owners may contact gulf states toyota at 713-580-3300.
Southeast toyota IS recalling certain model year 2005-2011 passenger vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
A driver may overload a vehicle which may increase the risk of a crash.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. the safety recall began on may 27, 2010. owners may contact southeast toyota at 1-800-301-6859.
Certain passenger vehicles fail to conform to the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims" the vehicles' tire and loading information label or placard on the driver's side b-pillar incorrectly indicates the spare tire size.
Risk and remedy
Risk
A misprinted label would lead to improper vehicle loading specifications or tire inflation which could result in a tire failure, increasing the risk of a crash.
Remedy
Owners will be provided with new tire information placards and installation instructions. at the customer's option, a dealer can perform the installation for them. the recall began on december 28, 2005. Owners may contact toyota at 1-800-331-4331.
Owner complaints
317 complaints101 involved a crash4 involved a fire71 injuries2 deaths
What owners report most
Latest complaints
- Air bags
The contact owned a 2006 Toyota Camry. While the contact's son was driving at an undisclosed speed, the vehicle crashed into a street pole and rolled several times before crashing into a parked vehicle, where it came to a stop. The air bags failed to deploy. The contact's daughter-in-law and the…
The contact owned a 2006 Toyota Camry. While the contact's son was driving at an undisclosed speed, the vehicle crashed into a street pole and rolled several times before crashing into a parked vehicle, where it came to a stop. The air bags failed to deploy. The contact's daughter-in-law and the contact's nephew were inside the vehicle during the failure. The vehicle was towed to a local tow yard. A police report was not filed. The vehicle was deemed a total loss. The contact's daughter-in-law and the contact's nephew were transported by ambulance to the local medical center. The contact's son was later taken to the local medical center. The daughter-in-law sustained a minor concussion and a fractured right wrist. The contact’s nephew sustained a minor concussion, a fractured right hand and wrist. The contact's son sustained a whiplash, a minor concussion, and a dislocated right shoulder. The manufacturer was not made aware of the failure. The failure mileage was approximately 240,000.
- Electrical system
What component or system failed or malfunctioned, and is it available for inspection upon request? LOCKS NOT WORKING How was your safety or the safety of others put at risk? ONLY DRIVER LOCK IS UNLOCKING/OPENING Has the problem been reproduced or confirmed by a dealer or independent service center?…
What component or system failed or malfunctioned, and is it available for inspection upon request? LOCKS NOT WORKING How was your safety or the safety of others put at risk? ONLY DRIVER LOCK IS UNLOCKING/OPENING Has the problem been reproduced or confirmed by a dealer or independent service center? YES Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? DEALERSHIP AND MECHANIC Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? YES. OFF& ON FOR SEVERAL MONTHS, THEN FINALLY STOPPED COMPLETELY.
- Electrical system · Steering · Unknown or other
The steering wheel while taking a right turn locked and wouldn't straighten all lights turned off on the panel all was locked and caused a crash because steering was locked into a turn
- Latches/locks/linkages › Doors › Lock
Driver door has remained in lock position when I tried to exit the car. Could NOT manually move the inside door lock and had to climb over the middle console to exit the car. I see this as a safety issue, as exiting the car slowly during an emergency could have caused an emergency. Also, for…
Driver door has remained in lock position when I tried to exit the car. Could NOT manually move the inside door lock and had to climb over the middle console to exit the car. I see this as a safety issue, as exiting the car slowly during an emergency could have caused an emergency. Also, for persons who are older or have physical mobility issues, climbing over console could be impossible. In addition to this issue, and possible related, is the fact the driver door actuator does not function properly. Hence, when trying to use my remote key fob, driver door will not unlock. This is potential for an emergency; for example, if trying to quickly get into car in a parking lot where there can be potential thieves, I am delayed getting safely into my car, since I have to use a key to unlock driver door. If I go around to passenger door, I would have to climb over console to get to driver seat. I am [XXX]. This is not ideal. I am original owner of the car. This issue has sporadically been a problem for several yrs. I took the car to 2 repair shops in Ca. Neither could determine how to make the repair after having to remove inside door panel. I have read there are THOUSANDS OF COMPLAINTS about this over the yrs., and Toyota has refused to make a recall campaign. I hope you can help initiate one. Current average estimate to try to repair this is $750. , and that does not include the lock that sometimes sticks in closed position. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Unknown or other
Suddenly car go high speed no reason I need to put it in neutral or car will smash into building
- Air bags
Passenger air bags light is ALWAYS ON whether someone sitting in the spot or not. Alerts with light to identify a problem. 2. Paint is peeling 0ff of vehicle all over. In addition, leather seats are also peeling in the front and back seats.
- Air bags · Unknown or other
Car flipped 3 times, it is a mangled mess and not one airbag deployed. This caused injuries to the driver, if any passengers would have been in the vehicle they would have been killed.
- Service brakes, hydraulic
The contact owns a 2006 Toyota Camry. The contact stated while driving 40 MPH, he depressed the brake pedal however, the brake pedal felt spongy. The contact depressed the brake pedal forcefully to the floorboard to stop the vehicle. The contact stated no warning light was illuminated. The contact…
The contact owns a 2006 Toyota Camry. The contact stated while driving 40 MPH, he depressed the brake pedal however, the brake pedal felt spongy. The contact depressed the brake pedal forcefully to the floorboard to stop the vehicle. The contact stated no warning light was illuminated. The contact parked on the side of the road to inspect the vehicle but was unable to locate the cause of the failure. The contact was able to continue driving at a slower speed to his residence. The contact took the vehicle to an independent mechanic and had the brake master cylinder and brake booster replaced. The vehicle was repaired but continued to experience the failure. The contact called an unknown local dealer and made them aware of the failure. The vehicle was not diagnosed or repaired. The manufacturer had been informed of the failure. The failure mileage was approximately 85,000.
- Vehicle speed control
I was driving my 2006 Toyota Camry on a level residential road at 35 mph and stopped at a red light. Upon turning left, the car unexpectedly accelerated at a high speed. I stepped on the brakes but the car did not stop nor slow. I was driving towards a very busy intersection. I tried to shift the…
I was driving my 2006 Toyota Camry on a level residential road at 35 mph and stopped at a red light. Upon turning left, the car unexpectedly accelerated at a high speed. I stepped on the brakes but the car did not stop nor slow. I was driving towards a very busy intersection. I tried to shift the gear to park, but the car was still running out of control. I turned left onto a side street in order to avoid the intersection. I was going too fast and jumped the curb, crashed into a Toyota Tundra truck parked on the driveway, and ricocheted into the retaining wall of the neighboring property. I was wearing my set belt, the airbag deployed and hit my chest. There were long tire marks on the street and a witness reported the squealing sound of brakes. Paramedics and police arrived immediately. My blood pressure was checked and I was advised to go to the ER. In the hospital, I was checked for reflexes, stroke and heart problems and got a X-ray of my chest. Everything was ok and I was sent home after 5 hours, although my chest was severely bruised and painful for about 2 weeks. It took me a month to drive again. I kept thinking about what caused the accident. I am certain that mine was a case of sudden unintended acceleration. While there were over 7 million Toyota cars subject to unintended acceleration recalls from 2005-2012, my 2006 Toyota Camry was not included in these recalls.
- Air bags · Electrical system · Seats
Passenger airbag sensor on now and the wheels grind after brake change and highway rides are unsafe always has been just my wife doesn't feel safe driving it
- Air bags
TL* the contact owns a 2006 toyota camry. The contact stated that while driving 45 mph, the vehicle rear ended the vehicle in front. The contact stated that the air bag failed to deploy on impact. The contact stated that the air bag deploy after her head collided with the steering wheel. The…
TL* the contact owns a 2006 toyota camry. The contact stated that while driving 45 mph, the vehicle rear ended the vehicle in front. The contact stated that the air bag failed to deploy on impact. The contact stated that the air bag deploy after her head collided with the steering wheel. The contact sustained head injuries and soreness in the arm and back that required medical attention. A police report was filed. The contact stated that the other driver did not sustained injuries. The vehicle was towed to a tow yard. The dealer nor manufacturer were made aware of the failure. The failure mileage was approximately 230,000.
- Unknown or other
I was driving in east granby near a fedex delivery truck. This truck kept swerving lanes in order to get around other cars, but he did so by cutting me off multiple times. He would go to change lanes then swerve back in the original lane, causing me and other cars to need to slam brakes to stay…
I was driving in east granby near a fedex delivery truck. This truck kept swerving lanes in order to get around other cars, but he did so by cutting me off multiple times. He would go to change lanes then swerve back in the original lane, causing me and other cars to need to slam brakes to stay safe. This was also in a school zone in east granby near the center about 3 miles from the bradley airport in ct. The driver kept laughing and smiling at myself and other cars and once I was able to get around him to pass and move on he flipped me off. Delivery drivers should be practicing safe driving especially in a school zone ...
- Air bags
2006 toyota corolla. Consumer writes in regards to takata airbag safety recall. *Ld the consumer stated the dealer received defective parts to repair the vehicle. The parts were returned and the consumer has since not received new parts to repair the vehicle. *Js
- Service brakes · Steering · Vehicle speed control
While on the street as I was backing my car into a parking space adjacent to the street curb the car suddenly accelerated in reverse at high speed, crashing over the curb and sidewalk, rear end first. My stepping on the brakes in an attempt to stop the car was unsuccessful; the car did not come to…
While on the street as I was backing my car into a parking space adjacent to the street curb the car suddenly accelerated in reverse at high speed, crashing over the curb and sidewalk, rear end first. My stepping on the brakes in an attempt to stop the car was unsuccessful; the car did not come to a stop until it crashed into an iron fence which bordered the yard causing damage to the fence and the car. a similar incident occurred quite a few years ago when the same car suddenly accelerated in reverse out of control and I was unable to bring it to a halt until it hit a parked car. I do not know what caused either of these incidents to occur.
- Service brakes · Vehicle speed control
TL* the contact owned a used 2006 toyota camry. While driving low speeds, the vehicle accelerated independently without warning and the brake pedal failed to operate. As a result, the contact's vehicle crashed head on into a pole. The air bags did not deploy. The contact was leaving a hospital when…
TL* the contact owned a used 2006 toyota camry. While driving low speeds, the vehicle accelerated independently without warning and the brake pedal failed to operate. As a result, the contact's vehicle crashed head on into a pole. The air bags did not deploy. The contact was leaving a hospital when the failure occurred and was treated at the same hospital for a cracked cervical spine, a cracked jaw, and a cracked tooth. A police report was not filed. The vehicle was totaled and towed to a tow yard. The cause of the failure was not determined. The dealer and manufacturer were not notified of the failure. The failure mileage was 149,000. *bf *tp
- Fuel/propulsion system · Service brakes · Structure › Body
Pulling out of hospital parking lot my 2006 toyota camry accerated on its own I tried to brake but the brake failed I hit guide rails on th left and then hit a pole that stopped the car the security from erie county medical center responded placed me in a ambulance and took me to their er I have a crack in my cervical spine and jaw*js
- Vehicle speed control
On friday, october 4TH (2019) I was waiting in line at a red light (on state street at the intersection with haywood road in asheville, north carolina). Suddenly my toyota 2006 lurched forward and banged into the car ahead of me. I stomped on the brake. The car stopped, then jumped forward again…
On friday, october 4TH (2019) I was waiting in line at a red light (on state street at the intersection with haywood road in asheville, north carolina). Suddenly my toyota 2006 lurched forward and banged into the car ahead of me. I stomped on the brake. The car stopped, then jumped forward again and banged the car ahead of me again. My husband, sitting in the passenger seat, threw the gear shift into 'park' and our car stopped. as I was just waiting in line at the light when the car spontaneously surged forward, we feel this was a case of 'toyota sudden unexpected acceleration.' our insurer has appraised the damage to car at just below $3000. We no longer consider this car safe to drive. our insurer did not require a police report. There were no personal injuries, so police were not called.
- Engine
TL* the contact owns a 2006 toyota camry. When the vehicle was started, the check engine indicator illuminated and remained lit. The vehicle was taken to cox toyota (800-951-4400, located at 3860 danbrook rd, burlington, nc 27215) where the camshaft sensor was replaced. The failure recurred and the…
TL* the contact owns a 2006 toyota camry. When the vehicle was started, the check engine indicator illuminated and remained lit. The vehicle was taken to cox toyota (800-951-4400, located at 3860 danbrook rd, burlington, nc 27215) where the camshaft sensor was replaced. The failure recurred and the vehicle was taken back to the same dealer where the technician performed a diagnostic test, but was unable to determine the cause of the failure. The technician recommended that the wiring harness be replaced. The contact stated that the wiring harness was not the issue. The failure was not repaired. The manufacturer was not made aware of the failure. The failure mileage was unknown.
- Service brakes
Hi nhtsa, seems like our 2006 toyota camry vehicle has persistent ineffective brake booster problem for few years. We have changed the break master cylinder assembly recently and even after the repair, vehicle doesn't stop within safe stopping distance,the root cause seems to be stemming from…
Hi nhtsa, seems like our 2006 toyota camry vehicle has persistent ineffective brake booster problem for few years. We have changed the break master cylinder assembly recently and even after the repair, vehicle doesn't stop within safe stopping distance,the root cause seems to be stemming from ineffective booster. Apparently brake booster system supposed to last life time of the car cause of expensive parts and labor amounting to almost 5% of the actual cost of car. I would like to request nhtsa to reach out to toyota corporation and have all the faulty brake booster systems be repaired on all make and models of toyota at free of cost to the customer. very respectfully, -[xxx] information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(B)(6). *Tt
- Air bags
TL* the contact owned a 2006 toyota camry. While driving 40 mph, another vehicle intersected the contact's lane. As a result, the contact crashed into the other vehicle. The air bags did not deploy. There were no warning indicators illuminated. The contact sustained bruises to the rib cage and…
TL* the contact owned a 2006 toyota camry. While driving 40 mph, another vehicle intersected the contact's lane. As a result, the contact crashed into the other vehicle. The air bags did not deploy. There were no warning indicators illuminated. The contact sustained bruises to the rib cage and sternum, and was transported via ambulance to the emergency room for medical attention. A police report was filed. The vehicle was towed to an impound lot. The contact called lewis toyota of topeka (located at 2951 sw fairlawn rd, topeka, ks 66614, (785) 273-2220) and informed them of the failure. The vehicle was not diagnosed and was deemed destroyed. The manufacturer was not notified. The failure mileage was 98,000.
- Tires
Erratic swaying of car leading to discovery of tire threads fraying.
- Steering
TL* the contact owns a 2006 toyota camry. The contact stated that while driving approximately 10 mph, the steering wheel suddenly became very difficult to turn in either direction causing the driver to loose control of the vehicle and crash into an utility pole. A police report was taken at the…
TL* the contact owns a 2006 toyota camry. The contact stated that while driving approximately 10 mph, the steering wheel suddenly became very difficult to turn in either direction causing the driver to loose control of the vehicle and crash into an utility pole. A police report was taken at the scene and the vehicle was towed away. During the crash the driver sustained back, torso, and neck injuries. The cause of the failure was not determined. The manufacturer and the local dealer were not notified of failure. The failure mileage was 238,000.
- Visibility/wiper
When the toyota camry was parked by a curb on the street, without anything or anyone touching it. The whole back windshield shattered into pieces for no unknown reason. The only difference was the wind was blowing a little stronger than normal and the temperature drop about 15 degree over the time…
When the toyota camry was parked by a curb on the street, without anything or anyone touching it. The whole back windshield shattered into pieces for no unknown reason. The only difference was the wind was blowing a little stronger than normal and the temperature drop about 15 degree over the time it was parked. The picture IS what it looked like when I got the vehicle home. The pieces started to fall down as I drove.
- Structure
TL* the contact owns a 2006 toyota camry. The contact stated that the dashboard was cracked. The dealer and manufacturer were not contacted. The vehicle was not diagnosed or repaired. The failure mileage was 120,000.
- Engine · Vehicle speed control
On sunday, april 7TH, I was traveling westbound on the southern state parkway at exactly fifty-five mph and exited at exit 17N. The exit ramp there IS sloped uphill and parallels taylor road. There IS a stop sign at the end of that ramp at hempstead avenue. Just as I was coming to the end of that…
On sunday, april 7TH, I was traveling westbound on the southern state parkway at exactly fifty-five mph and exited at exit 17N. The exit ramp there IS sloped uphill and parallels taylor road. There IS a stop sign at the end of that ramp at hempstead avenue. Just as I was coming to the end of that ramp at very slow speed and almost to that sign, the engine suddenly sped up with extreme acceleration and the car lurched forward. I slammed my foot onto the brake pedal which kept the car from moving further forward and then before I could do anything else, the phenomenon ended and the engine returned to its normal idling speed of approximately 700 rpm on the dashboard tachometer. I drove home and parked the car in my driveway. The following morning, monday april 8TH, I made an appointment for that day to bring the car to a toyota dealer. As I was preparing for that, I started the car and everything seemed normal. I put it into reverse in order to back out when the engine again suddenly sped up to extreme acceleration. Again, I slammed my foot onto the brake pedal and this time I put the gear shift into park which kept the car from moving further. The tachometer needle was rotated clockwise and well up into the "red" zone which begins at 6000 rpm. In a moment or so, the phenomenon again ended and the engine again returned to its normal idling speed.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Engine surging
The petitioner owns a my 2006 toyota camry with a 4-cylinder engine that was purchased new in january 2006. The petitioner also previously owned a my 2005 camry. He alleges that both vehicles exhibited vehicle engine surging, which he described as a short duration (1 to 2 second) increase in engine speed occurring…
The petitioner owns a my 2006 toyota camry with a 4-cylinder engine that was purchased new in january 2006. The petitioner also previously owned a my 2005 camry. He alleges that both vehicles exhibited vehicle engine surging, which he described as a short duration (1 to 2 second) increase in engine speed occurring while the accelerator pedal IS not depressed. In an initial interview, the petitioner estimated that 6 to 8 surge incidents, of varying severity, occurred in the my 2006 vehicle over the course of 10,000 miles and 7 months of ownership. The petitioner reports that the brake system IS effective at overcoming the surge. However, he IS concerned about reports filed with nhtsa alleging uncontrolledsurging in my 2002 to 2006 camry vehicles bringing those vehicles to a high rate of speed (in some cases, purportedly, with the brakes applied).after review and analysis of the available information, odi has not identified a vehicle-based defect that would have produced the alleged engine surge in the petitioner?s vehicle, nor was it able to witness such an event when road testing the petitioner?s vehicle.evaluation of a suspect throttle actuator removed from the petitioner?s vehicle did not reveal a component problem. Warranty and parts sales of the actuator are unremarkable.these data do not support the existence of a wide-spread defect or ongoing concern. The fault detection and reaction strategy described in toyota?s technical documents indicates that a loss of throttle control due to a component or system failure would be detected within a one second periodafter which engine power would be limited. The petitioner?s my 2006 vehicle brake system overcomes full engine power at easily achievable brake pedal forces. Based on the analysis conducted, it IS unlikely that nhtsa would issue an order for the notification and remedy of a safety related defect at the conclusion of the investigation requested in the petition.consequently, in view of the need to allocate and prioritize nhtsa?s limited resources to best accomplish the agency?s safety mission, the petition IS denied.please see the march 9, 2007 federal register notice for further details.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10210375TSB: This Service Bulletin includes procedures to replace damaged or loose front carpet floor retainer(s) without replacing the carpet assembly. Follow the Repair Procedure in this bulletin to replace the loose or damaged carpet floor retainer(s).
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10204571TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10197476Replacement vin plates.
- 10197473Product general information.
- 10190460Toyota Safety Recall and Service Campaign - Technician Certification Requirements
- 10190453TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10188913TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2021 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10187241TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10186195TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10177782TSB: OBSOLETE NOTICE June 23, 2020: This bulletin is now obsolete. Please see T-SB-0063-20.
- 10177781TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. ST005-01, SU001-08, and T-SB-0391-08. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Be sure to review the entire content of this service bulletin before proceeding. This Service Bulletin provides best practice procedures for vehicle pulling complaint, diagnosis, and repair for 2002 ? 2021 model year Toyota vehicles. This information supplements Repair Manual procedures when the symptoms are: ?Vehicle Pulling: The vehicle moves to the right or left when the driver holds the steering wheel while driving straight ahead without exerting steering effort. ?Steering Wheel Off Center: The vehicle travels straight, but the steering wheel is not pointed straight ahead. The vehicle is not pulling. Before repairing a vehicle pulling to one side, it is necessary to clearly identify the cause of the pulling condition. Frequently, pulling to one side is diagnosed as a wheel alignment concern. However, the actual cause may be related to the lateral force generated by the tires, vehicle damage, road crown or worn components. Performing a wheel alignment when tire force is the cause could result in the wheel alignment being set at a value outside of specifications. This could then cause other problems such as uneven tire wear, etc. A customer may notice a pull to the left when in the left lanes of travel and notice a pull to the right or no pull when traveling in the right lanes of travel on the very same section of roadway. This road crown effect is environmental and cannot be corrected with suspension adjustments or any other wheel or tire modification discussed in this bulletin.
- 10174891TSB: OBSOLETE NOTICE April 07, 2020: This bulletin is now obsolete. Please see T-SB-0032-20. Replacement Certification Labels and VIN Plates
- 10174890TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, T-SB-0144-08, and T-SB-0304-17. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10172843OBSOLETE NOTICE February 12, 2020: This bulletin is now obsolete. Please see T-SB-0010-20.
Every Toyota Camry model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.