2013 Toyota Camry

Recalls

2 recalls name the 2013 Toyota Camry. Newest first.

• Air bags

  Oct 17, 2013NHTSA 13V442000802,769 vehicles

  Toyota is recalling certain model year 2012-2013 Avalon, Avalon HV, Venza, Camry, and Camry HV vehicles. In the affected vehicles, the drain hose for the air conditioning condenser may become clogged causing water to accumulate at the bottom of the air conditioning condenser unit housing. The accumulated water may then leak through a seam in the housing…

  Risk and remedy

  Risk

  A short circuit may cause the air bags to become disabled or inadvertently deploy. An inadvertent airbag deployment can increase the risk of injury or the possibility of a crash. An inoperative airbag can increase the risk of injury in a severe crash. The power steering assist could also become inoperable resulting in increased steering effort and can increase the risk of a crash at low speeds.

  Remedy

  Toyota will notify owners, and dealers will seal the air conditioning condenser unit housing and install a protective cover on the airbag control module, free of charge. The recall began on February 5, 2014. Owners may contact Toyota at 1-800-331-4331.

  Full recall details →

• Visibility › Windshield wiper/washer › Switch/wiring

  Oct 17, 2013NHTSA 13V5050009,795 vehicles

  Toyota Motor Engineering & manufacturing North America, Inc. (Toyota) is recalling certain model year 2013-2014 Camry and Camry HV, model year 2013 Avalon and Avalon HV and model year 2014 Corolla vehicles. In the affected vehicles, the windshield wiper switch assembly may short circuit. As such, these vehicles fail to conform to the requirements of…

  Risk and remedy

  Risk

  A short circuit could cause inoperative windshield wipers, reducing driver visibility and increasing the risk of a crash.

  Remedy

  Toyota will notify owners, and dealers will replace the wiper switch assembly, free of charge. The recall began on November 8, 2013. Owners may contact Toyota at 1-800-331-4331.

  Full recall details →

Owner complaints

What owners report most

1. Power train67
2. Unknown or other46
3. Air bags37
4. Vehicle speed control35
5. Electrical system29
6. Steering26
7. Engine26
8. Structure26
9. Service brakes20
10. Seat belts10

Latest complaints

• Apr 27, 2026NV150,000 mi
  Steering
  The contact owns a 2013 Toyota Camry. The contact stated that while driving on several occasions at various speeds, there was a knocking sound coming from the steering column. The contact stated that while driving downhill on several occasions, the steering column and dashboard vibrated abnormally.…

  The contact owns a 2013 Toyota Camry. The contact stated that while driving on several occasions at various speeds, there was a knocking sound coming from the steering column. The contact stated that while driving downhill on several occasions, the steering column and dashboard vibrated abnormally. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was 150,000.

• Mar 24, 2026TX57,000 mi
  Power train
  The contact owns a 2013 Toyota Camry. The contact stated that the dealer had replaced the battery four times within 8 years, and the water pump and the alternator had been replaced within 18 months. Additionally, the contact stated that while driving at various speeds, the vehicle shuddered…

  The contact owns a 2013 Toyota Camry. The contact stated that the dealer had replaced the battery four times within 8 years, and the water pump and the alternator had been replaced within 18 months. Additionally, the contact stated that while driving at various speeds, the vehicle shuddered, hesitated, and failed to respond as needed, and lost automotive power while depressing the accelerator pedal. There was no warning light illuminated. The contact related the failure to the Toyota Warranty Enhancement Program Number: ZE5. The vehicle was taken to a dealer; however, the failure could not be duplicated. The vehicle was not repaired. The manufacturer was notified of the failure and informed the contact that the vehicle was not covered under warranty because the program had expired. The failure mileage was approximately 57,000.

• Oct 22, 2025WI
  Engine

  Replaced tranny

• Oct 8, 2025GA
  Air bags · Power train · Unknown or other

  Having issues with the ac condenser drain hose. And Transmission shuddering during acceleration.

• Aug 13, 2025LA210,000 miCrash
  Wheels › Lugs/nuts/bolts/studs
  The contact owns a 2013 Toyota Camry. The contact stated that while driving at approximately 65 MPH, the passenger side front tire detached from the vehicle. The contact stated that there was no warning or indication of a problem. The contact stated that the vehicle dropped onto the roadway on the…

  The contact owns a 2013 Toyota Camry. The contact stated that while driving at approximately 65 MPH, the passenger side front tire detached from the vehicle. The contact stated that there was no warning or indication of a problem. The contact stated that the vehicle dropped onto the roadway on the passenger side. The contact stated that the tire had rolled away in front of the vehicle. The contact stated that there were scrapes and deformation to the bumper on the passenger side, also the wheel well, tire hub, and the passenger door were damaged due to contact with the road. The contact had the vehicle towed to an independent mechanic. The mechanic determined that all but one lug nut had sheared off the bolts. The only lug nut left was jammed in the rim of the tire. The vehicle was not repaired. The manufacturer was informed of the failure. The failure mileage was approximately 210,000.

• Jul 12, 2025IL
  Vehicle speed control

  Shifting shudder

• Jun 24, 2025MN187,000 mi
  Power train
  The contact owns a 2013 Toyota Camry. The contact stated while driving at an undisclosed speed, the transmission shuddered, with the check engine warning light illuminated. In addition, the contact became aware that the transmission was slipping. The vehicle was taken to an independent mechanic…

  The contact owns a 2013 Toyota Camry. The contact stated while driving at an undisclosed speed, the transmission shuddered, with the check engine warning light illuminated. In addition, the contact became aware that the transmission was slipping. The vehicle was taken to an independent mechanic where it was diagnosed with transmission failure. The contact was informed that the transmission needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 187,000.

• Jun 20, 2025IL
  Structure › Body

  Factory paint is peeling off. It is a known issue and Toyota won't do anything for me.

• Jun 9, 2025FL
  Structure › Body
  I attempted to open my car door and the door handle simply snapped off in my hand. This is the second time this has occurred. The first time, my driver's door handle snapped off when a technician at my Goodyear repair shop tried to open it. Now, the exact same thing happened to my passenger…

  I attempted to open my car door and the door handle simply snapped off in my hand. This is the second time this has occurred. The first time, my driver's door handle snapped off when a technician at my Goodyear repair shop tried to open it. Now, the exact same thing happened to my passenger driver's side door when I went to open it. Upon closer inspection, it seems that the manufacturing is defective, as the handle seems to have been simply glued on in spots rather than more securely attached. Bear in mind that this car is barely driven more than twice a week; it barely has any wear and tear and is under 80,000 miles despite 12 years of use.

• Oct 10, 2024PA
  Power train
  I have a vehicle in which a safety recall was issued for models In that body type and year range. The recall was issued in response to a software glitch that causes a shudder when acceleration. I called my local dealer and was told I do not qualify for a recall even though I have the exact same…

  I have a vehicle in which a safety recall was issued for models In that body type and year range. The recall was issued in response to a software glitch that causes a shudder when acceleration. I called my local dealer and was told I do not qualify for a recall even though I have the exact same symptoms listed in the recall. I have spent over 3k trying to resolve this issue and have tried to reach out to corporate with no luck. My car is getting more unstable and nearly lost control due to the shudders. What can I do?

• Sep 12, 2024AR
  Suspension

  Car shudders at 40 to 50 mph recall previously on torque converter

• Jun 27, 2024NY205,000 mi
  Power train
  The contact owns a 2013 Toyota Camry. The contact stated that while driving 40 MPH, the vehicle shuddered abnormally. There was no warning light illuminated. The vehicle was taken to the dealer where it was diagnosed as a failure with the torque converter. The torque converter was flushed, and it…

  The contact owns a 2013 Toyota Camry. The contact stated that while driving 40 MPH, the vehicle shuddered abnormally. There was no warning light illuminated. The vehicle was taken to the dealer where it was diagnosed as a failure with the torque converter. The torque converter was flushed, and it was stated by the dealer that the torque converter might have caused damages to the transmission and the transmission needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure and the contact was referred to the NHTSA Hotline for assistance. The failure mileage was approximately 205,000.

• Jun 10, 2024CA90,000 mi
  Vehicle speed control
  The contact owns a 2013 Toyota Camry. The contact stated while driving 15-20 MPH and depressing the accelerator pedal, the vehicle hesitated to respond. There was no warning light illuminated. The contact stated that the failure had been recurring increasingly while driving. The dealer and the…

  The contact owns a 2013 Toyota Camry. The contact stated while driving 15-20 MPH and depressing the accelerator pedal, the vehicle hesitated to respond. There was no warning light illuminated. The contact stated that the failure had been recurring increasingly while driving. The dealer and the manufacturer were not notified of the failure. The vehicle was not diagnosed or repaired. The contact related the failure to Toyota Campaign Number: ZE5. The failure mileage was approximately 90,000.

• May 10, 2024KY
  Power train

  Unknown. The vehicle shutters tremendously while traveling between 40 and 60 mph.

• Apr 18, 2024ID
  Unknown or other

  Toyota Camry se 2013 When accelerating at a stop light or when slowing down to make a turn, it hesitates when stepping on it to go or when accelerating at a turn,. It will go about 5 - 10 feet and hesitate, It happens more several times in one day! It scares me and I’m worried about getting into an accident. No check engine light and does not throw any codes.

• Mar 20, 2024OK
  Seat belts

  Hi. My name is [XXX] . I owe a 2013 Toyota Camry SE and the selt belts in the back are not working. That is a major safety issue. I need it to be fixed. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

• Feb 28, 2024NC
  Power train
  My 2013 Camry shudders when I am accelerating, usually between 15-30 mph. It can be alarming since I expect the car to accelerate quickly but instead it shudders. I was making a right hand turn at a stop light, I went to accelerate and my car shuddered so badly and failed to accerelate so I was…

  My 2013 Camry shudders when I am accelerating, usually between 15-30 mph. It can be alarming since I expect the car to accelerate quickly but instead it shudders. I was making a right hand turn at a stop light, I went to accelerate and my car shuddered so badly and failed to accerelate so I was almost rear ended. This is a major safety concern when the gears do not properly change during operation. My local Toyota dealership diagnosed it as being a problem with the torque converter. I am aware that Toyota issued a Warranty Enhancement Notification - ZE5 to do three things, put in a new torque converter, additional transmission pan magnets, and update the software. I purchased my vehicle in 2019 and was not made aware of this by the Toyota dealership at the time of purchase nor did I receive anything in the mail. Now, Toyota refuses to correct this problem even though it continues to be an issue with owners of these vehicles.

• Feb 21, 2024CA
  Engine
  2013 Toyota Camry Hybrid XLE, 2AR-FXE. 134,000 miles. The car burns a quart of oil every 2,000 miles. This issue is from the low-tension piston rings sticking up and leading to scarring of the cylinder walls, causing oil consumption. Toyota had this issue with the 2007 2AZ engine and fixed it, but…

  2013 Toyota Camry Hybrid XLE, 2AR-FXE. 134,000 miles. The car burns a quart of oil every 2,000 miles. This issue is from the low-tension piston rings sticking up and leading to scarring of the cylinder walls, causing oil consumption. Toyota had this issue with the 2007 2AZ engine and fixed it, but hasn't done a thing about the 2AR engine with the same problem. Hundreds and thousands of owners have complained but Toyota does not care enough to solve the problem! TOYOTA DOESN'T CARE ABOUT YOU, they only care about themselves and the money they make for charging people thousands of dollars for short blocks out of the owner's pocket for an issue that is not the owner's fault. The car has had 5,000/6 month mile oil changes all its life. Don't buy a 1AR/2AR-equipped Toyota if you expect it to last. It also has a VVT-i rattle problem that is very common that Toyota doesn't bother to fix for their customers.

• Feb 21, 2024CACrash
  Service brakes
  Vehicle brake assist hold was engaged, foot still depressed on the pedal. The car released the brake hold and starting rolling at 5 mph even with my foot still on the brake. I had to let off the brake pedal and slam back on it and the car didn't stop in time and still hit the car in front of me.…

  Vehicle brake assist hold was engaged, foot still depressed on the pedal. The car released the brake hold and starting rolling at 5 mph even with my foot still on the brake. I had to let off the brake pedal and slam back on it and the car didn't stop in time and still hit the car in front of me. Very light impact but as a result led to the whole front of the car being out of shape (bumper, grille, headlights). Was aware of its deactivation but was not aware that the force of the brake pedal does not override the auto hold assist when the assist is deactivated.

• Jan 21, 2024NC
  Electrical system · Steering
  This complaint has to do with Toyota's electrical steering. I will begin this complaint by explaining what I've learned about the new Toyota vehicles. I've been having electrical problems with my car for the past year. It started with the radio going in and out about eight months ago, and now it…

  This complaint has to do with Toyota's electrical steering. I will begin this complaint by explaining what I've learned about the new Toyota vehicles. I've been having electrical problems with my car for the past year. It started with the radio going in and out about eight months ago, and now it has been out completely for two months. The tire pressure sensor warning light cycled intermittently when the radio went out. When the radio finally quit working, the tire pressure warning light stays on constantly. When I researched replacing the radio with a non-Toyota radio, I had to replace all of the wiring harnesses (steering control and radio, and there is another harness that I can't remember -- this is from BestBuy). If you don't replace all of the wiring harnesses, you lose the functions of the electrical and warning system, for example, the tire pressure warning lights. In my research (on the internet), I found that the electrical steering can go out if the system receives a signal that the tires are out of alignment and tire pressure warnings. I check my tire pressure every week because the warning light is on. I do not have a tire pressure reset button on my car. The computer or the computer board on the radio periodically pings the sensors. I began hearing a humming noise from the front right side of my car. I originally thought it was a tension pully on the belt because of the cold weather and no warning light. I drove my car about ten miles with the humming noise. Then, the power steering came on, and the steering became almost impossible. (I learned to drive in vehicles without power steering.) Within minutes of the power steering light coming on, I had a catastrophic failure of all systems in my car. Every warning light on the dashboard was on. After about two minutes, the lights cycled off. About one minute later, they came back on. The difficulty driving without the power steering would have been a bad accident if I had been on the Interstate.

• Nov 9, 2023CA105,000 mi
  Seat belts
  The contact owns a 2013 Toyota Camry. The contact stated while attempting to unbuckle the front passenger’s side seat belt, the seat belt failed to release from the buckle. After further attempts to release the buckle, the anchor assembly fractured. The contact was unable to be reassembled. No…

  The contact owns a 2013 Toyota Camry. The contact stated while attempting to unbuckle the front passenger’s side seat belt, the seat belt failed to release from the buckle. After further attempts to release the buckle, the anchor assembly fractured. The contact was unable to be reassembled. No warning lights were illuminated. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. The manufacturer was notified of the failure but provided no assistance. The failure mileage was 105,000.

• Sep 7, 2023CA
  Electrical system · Unknown or other
  The panel that controls the interior lights, garage door operation, moon window and an SOS button appeared to have an electrical malfunction and part of that control panel which is on the ceiling between the moon window and mirror melted due a heat source. I do not know what caused the problem but…

  The panel that controls the interior lights, garage door operation, moon window and an SOS button appeared to have an electrical malfunction and part of that control panel which is on the ceiling between the moon window and mirror melted due a heat source. I do not know what caused the problem but took the vehicle to a dealer and they would not advise on what made the plastic melt. In my opinion that could have caused a fire as the vehicle is in the garage when not in use.

• Aug 29, 2023FL
  Tires
  I purchased a set of 4 Cooper Ultra Touring (235/45R18) Tires in 05/2022. Within 40,000 miles of purchasing the Tires, I was traveling on I-10 WB at approximately 70 MPH when the Vehicle started to shake violently. I pulled into the Right Lane and slowed down significantly and was able to make it…

  I purchased a set of 4 Cooper Ultra Touring (235/45R18) Tires in 05/2022. Within 40,000 miles of purchasing the Tires, I was traveling on I-10 WB at approximately 70 MPH when the Vehicle started to shake violently. I pulled into the Right Lane and slowed down significantly and was able to make it to my residence safely. The very next day, I took the Vehicle to a local Goodyear Franchise and had a new Passenger Front Tire installed on 10/24/2022. The Service Tech advised that the Passenger Front Tire was on the verge of separating and that was the reason for the Vehicle Shaking. On 08/28/23, I was traveling on I-10 EB and the Driver's side of the Vehicle started to shake violently again. I traveled in the Right Lane at a slow speed until I came up on a Toyota Dealership in Daphne, Alabama. The Service Tech put the Vehicle up on a lift and advised me that the Driver's Side Rear Tire had separated and the Driver's side front tire had an uneven wear pattern on the inside edge. I had both tires promptly replaced. I have done my due diligence and have discovered many recalls on Cooper Tires as of late. The same descriptions I have read online are exactly what I have experienced with my two tires that have separated. I did check to see if these Tires were apart of any recalls and they are not. One thing I would like to point out is that these Cooper Tires were apart of a Promotion that Tire Choice Auto Service Centers were running in the Summer of 2020 to buy 3 tires and receive 1 free. For this reason, I do not know how many of these Tires were sold as it felt like they were just trying to get rid of them as they were heavily discounted. I do suspect that these tires were made in the same factories as many that were recalled. These Tires do have a 70,000 mile Warranty and I am currently in the process of trying to get the Tires from Toyota so Cooper can inspect them for a refund. Reference #: [XXX]. Please let me know if you need more information. INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORM

• Aug 22, 2023OH180,000 mi
  Visibility
  The contact owns a 2013 Toyota Camry. The contact stated while activating the front windshield wipers, the wipers failed to function. There was no warning light illuminated. The contact stated after driving over a speed bump, the windshield wipers functioned as needed. The dealer was contacted and…

  The contact owns a 2013 Toyota Camry. The contact stated while activating the front windshield wipers, the wipers failed to function. There was no warning light illuminated. The contact stated after driving over a speed bump, the windshield wipers functioned as needed. The dealer was contacted and stated that the vehicle was not included in NHTSA Campaign Number: 13V505000 (Visibility). The vehicle was not repaired. The manufacturer was contacted and stated that the VIN was not included in the recall. The contact was referred to the NHTSA Hotline for assistance. The failure mileage was 180,000.

• Jun 8, 2023VA
  Unknown or other

  My car has a vibration on the front end. I have taking it for alignments, tire balancing none of those is the issue. We check for CB joints, wheel bearing not the issue. Someone made a statement of the same issue I am having with my car saying that it’s a class action lawsuit out take it to a transmission shop get it fix and submit invoice to get reimbursed.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
• 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
• 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
• 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
• 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
• 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
• 10244115TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks
• 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
• 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
• 10230369DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10230368DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10230367DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
• 10227920DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10227919DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10227918DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
• 10227916DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
• 10227915TI: TECHNICAL INSTRUCTIONS Customer Support Program ZKG Multiple Models and Model Years Vehicles Painted with Blizzard Pearl (070) or Super White (040) Paint Color Coverage for Peeling of Factory-Applied Paint
• 10227914CSP: Customer Support Program ZKG ? Paint Repair Process
• 10227913DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
• 10227912DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
• 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
• 10224108TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
• 10220183TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
• 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process

Every Toyota Camry model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.